Build a Kit Car with ONLY a Drill, Pop Rivets, and Rattle Can Paint - Engine Power S2, E10

[@PowerNationTV]

We'll continue to post these episodes here on KZbin. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/engine-power

[@ministerc9513]

Please don't

[@JustRelaxCo]

How do we enter to win this thing?

[@bustersmith5569]

How do you title a kit like that ? TY,

[@robertless5056]

You guys are high

[@1RAYGC]

I remember when I used to watch tv shows with these guys and others, the whole show was a commercial except when they had a break for a commercial.

[@lilbo1Y1]

I assembled one for a friend. I was very impressed with the quality of the kit. We added air conditioning, power windows, hard top, windshield wipers, remote start with alarm, remote entry ( no handles ), touch screen radio, cd, blue tooth, navigation with a back up camera, hidden LED backup lights, Rockford Fosgate amp, subs and high end speakers. Turned out so nice that l forget sometimes that l assembled it. Maybe someday I can assemble one for myself. Owner went with a 351 dressed up inside and out, TCI trans and 8.8 rear end. It will move.

[@honorabledice]

Hello Arthur, would you assemble one for me as well. I'm willing to pay up

[@grahamstrouse1165]

Don’t know how likely it is that you’ll see this, Arthur, but if you do, may I ask how long it took you to put this ride together? It sounds like a really neat ride, btw. I hope you get a chance to build one for yourself!

[@ShannonSouthAfrica]

A drill and a rivet gun and a lot of knowledge about car building as well as a full set of every tool.

[@GamingwithKentuckianJD]

I think with an in depth how to step by step video would encourage more novice builders.

[@hualni]

It's hard to convince someone to use a rattle can on a car they spend $30k on.

[@1RAYGC]

I decent paint gun is not expensive, I think it has to do with Duplicolor being a sponsor.

[@georgvonsauer2618]

I use a rattle can on my model t all the time...with a little bit of work, you can not tell where I used it...I do not sweat rock chips or scratches...

[@boomerisadog3899]

@@georgvonsauer2618 Teach me your ways, Great master. For I have a 67 Chevelle SS with 10 year old black paint.

[@dancahill9122]

Who said anything about money ? ? ? They said build a car with a drill, pop rivet gun and rattle can paint. The title didn't say anything about needing Money ! ! I'M PISSED ! ! !

[@bmxriderforlife1234]

@@boomerisadog3899 dude it's not hard. But also depends how much work you wanna do. Learn about burying shit in clear coat like racing stripes and polishing and wet sanding.

[@Emilia-el6cc]

i really appreciate the depth you bring to your discussions.

[@becomeraptureready]

Dupli-Color customer for life. Painted my rally car interior with the stuff

[@tomthompson7400]

how did you sand the excess fibre glass , and flash mould lines , was it with a pop rivet , or the drill ??

[@tihzho]

18:41 Question - Aluminium to steel riveting, they are dissimilar metals and are subject to considerable galvanic corrosion being wet from rain, road grime (salted roads) and even humid hot days. Wouldn't the better choice have been zincanneal sheet and spot weld them to the frame THEN paint the frame?

[@tdrewman]

I love the kit and I love the price, but I would have a roll bar put on it before I go out with it.

[@lilbo1Y1]

Kit comes with a roll bar but people leave it off. It bolts in or could be welded to the frame.

[@Maxtowers71]

here in europe we can just dream about something like this... a kit car built in your driveway with a couple of buddies and a bunch of beers... enjoy your freedom fellas

[@crsmith56]

Will do. Thanks 🍺

[@6977warrior1]

12:42 That wrench doesn't look like my drill or rivet gun or paint can. Which is it PowerNation?

[@chuckallen9778]

300 HP go cart, fun to dream about, looks coo, fun to drive around the block but will wear you out after 50 miles.

[@JohnSmith-ps7wp]

Not true if you go with the hard top.

[@demiswinter3720]

CAR BEAUTIFUL

[@ronaldharris6569]

I dream of one of those 33s,with a hot slant six and some tall narrow steel wheels,

[@goober3463]

I'd find a 85 mustang donor with a carbureted roller top 302 and a 5 speed manual, light weight 225 hp stock and 300-6 with overdrive gas mileage until you stomp on it.

[@ronaldharris6569]

@@goober3463 those are rare now,but there are a lot of crown,vics out there

[@trentdawg2832]

Dream bigger and lose the 6

[@ronaldharris6569]

@@trentdawg2832 making oddball stuff fast is the point

[@basshead.]

+Ronald Harris The Slant 6 isn't an oddball. It's a pretty generic old inline 6 engine.

[@spyderlyf3]

A lot of people complaining about using 3 extra wrenches to build it. Finish work is up to you if you want to rattle can or put it in a booth..hell make it a rat rod.Its complete enough for me to do in my garage. Supercharged LS engine would be nice, reliable and fast as hell!

[@andrewmacdonald8076]

American hot rodder culture is great.🥝🇳🇿😊

[@bobelder6794]

What a clean lookin build. Great job

[@demiswinter3720]

CARROS MARAVILHOSOS ,SENSACIONAL!!!

[@helloRockwood]

I thought I was going to see a cool build video. Turns out this is just an 18 minute long commercial. DO BETTER.

[@jgkavanaugh]

That is every episode of the show. It is all product placement and advertising.

[@1RAYGC]

same is true with their tv shows

[@boomerisadog3899]

@@1RAYGC DuPliColoR!

[@chrishunter1254]

This makes me so happy MERICA🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

[@Irish-Scorpion]

I love and completely agree with your list. The last quality of a Sense of Humor is my most important one as well, but unfortunately in my almost 46 years I have yet to meet someone that could match my sense of humor. I do look forward to that.

[@jdwisdom9433]

In case I was the last to know, open wheels are NOT legal in America. You MUST have fenders of a sort that prevents rocks and other debris from being thrown by the tire tread. FMCSR part 387. Thanks, JD

[@ghostup101]

@Abe Adams you’re wrong. The Plymouth Prowler does have fenders in the rear and front of the vehicle. They may be small but they are there. Any vehicle without fenders is considered illegal to be driven on public roads. Although you may own one without fenders and have it in your personal collection.

[@Darkeiser.7]

Yep... I want one!

[@demiswinter3720]

COISA LINDA DE SE VER ,LINDO,LINDO,LINDO!!!

[@ВиталийАдаричев-н8т]

Молодцы. очень интересное занятие. классные машинки

[@ronaldkellams6917]

Yeah that's awesome we love to have something like that lian-li pastime getting too old that is an awesome job we love your work love to watch you work

[@thesquirrelchroniclesakare7808]

Wow... It is badass ! I would love to have it in my driveway !

[@bugermen5230]

Hi Bro nice project.Very very nice:Colour,power engineers.❤

[@bob-g2h]

Once i have ny new job this is my goal is to build one of these and make videos cruising my home state

[@gelandewagen4376]

on such a wheelbarrow to dissect just a pleasure like bro

[@TateMorphous]

How long does it take to build

[@tomkirchhoff4672]

LoL it's badassss, would look incredible in that malibu candy metallic blue with tan leather

[@monzon529]

That would be one bad ass ride to win.

[@1RAYGC]

I once saw a guy change an automatic transmission with only one tool and it wasn't a drill, pop riveter, or a rattle can, it was a pair of Visegrips.

[@dsldrvr69]

thats sweet ride

[@synapsesuicide4372]

This looks like something I need to start saving money for, it'll give me something to shoot for as well as be able to say I built my own car, you wouldn't even need a big motor for a car that size and weight

[@daviddavid5880]

Man I am just drooling to see a hopped up straight six and a manual in that. (Intake stacks on one side, pipes on the other side). A Jeep 4liter or old Dodge Slant... wait. Both of those have exhaust and intake same side. Well... still way cooler than a generic small block v8.

[@PierreCalifornia]

You guys always find a way to disappoint me 🤦🏽‍♂️🧐😳🥺

[@bigbuck1318]

I wonder if it would take a straight 6

[@suckmysilencer747]

Putting a 6 on a hot rod? Is what us Australians would say is just ain't cricket

[@revolutionday1]

2JZ? ;-)

[@jayarnold8883]

Umm yeah.

[@somdgeorge609]

Go full on oddball and slant six it

[@rolldog82]

Packard straight 8 👍

[@BKMDano17]

Drill, rivet's, rattle can and about 30 THOUSAND DOLLARS😵

[@robb5522]

Does the assembly team come with the kit?

[@kasperberg2124]

Best TV ever........ :) LoveNation

[@kenik2023]

426 hellephant crate engine👍🏾

[@willcochran3669]

Very cool 😎🇺🇸 I wish we would of have had this when I was a kid.

[@ThisCantBeReal1]

"Visibility is good" until the top goes on and you realize it's chopped, lol.

[@zerotolerance5581]

I laughed out loud at the driver switch. Haha.

[@nivesknight]

I will totally take the car. Good looking job.

[@kenswaine7177]

This is way cool very light

[@user-sw2er4bv1r]

Looks pretty good actually

[@mrmidnight32]

Nice Duplicolor commercial boys.

[@jefftysoutube]

4 years latter- A real benefit of these kits is the possibility of a very cheap and practical A to B vehicles by going the low hp route, AKA some of the light vehicles out of the UK using motor cycle engines. Being built for larger engines may give them a large safety buffer over the lighter vehicles when smaller engines are fitted.

[@bilbobaggins4710]

Build that wall 🙋

[@davenelson1571]

Well it looks like Pats shirt pocket survived another episode! I doubt Shakespeare carried that many pens during the peak of his career.

[@davenelson1571]

YOYO MA We should all be thankful that Pat hasn't yet taken to wearing a codpiece & let's just hope he doesn't try to get a quill & ink bottle into that pocket!

[@billieyoung497]

simple build..looks great

[@domdegood5376]

How do you shake a can of paint?

[@mrgallardo777]

when i seen them carry the plastic motor i was like damm there strong . 15:26

[@DylTheDadMan]

Bro I do that crap Everytime.

[@iammaximus614]

Motor looks amazing & easily moved 🤓👍🏽

[@youtubeisbroken241]

How did you install the drive line with a drill and rivet gun

[@DirtyMuthaFugginD]

My guess? Very carefully as well as a high likelihood that it took more rivets than a boeing 727...... 🤨 lol

[@devilswish8876]

good video so easy to build that car

[@PatrickKniesler]

Now someone make a 3-row dad wagon kit.

[@allendaigle6351]

Heavens waiting, Jesus would be proud !!!!!

[@elNenio]

Aston Martin is made the same idea.. using a space age glue between the panels and rivets.. the car is light and stiff at the same time..

[@Tom-kn6sr]

Rollbar(s) ? Nice harness.

[@guillermonieri4203]

Thank you.

[@melvinjacobs5198]

It's just a dream for me

[@gottliebdee263]

I love the look of some of those but I just can't help but wonder if in an accident they'd fold up like a paper plane.

[@bryanleal1475]

It has a really rigid frame it'll be alright plus this is no daily car

[@thechannelofultimatedestiny]

Yes I buy kit cars for safety

[@squarebodymikey9868]

Plus I'll take anything those two build! 😁😁😁😁

[@тимурджабишвили]

How much is such beauty?

[@Rich77UK]

I like the rims.

[@stevoschannel4127]

Ford racing crate motor? How was the oil consumption?

[@randyupton7218]

I love this and I want to get one I'm sure I could build it no problem!

[@jodan4043]

7:00 The assembly manual... Weighs heavier than Factory Five's 33..😯

[@Sup666-n8l]

I soooo need one of these

[@allstar930]

This is a great video, f the haters. I'd build one with a hot import inline-6.

[@pcox5333]

Do they come in right hand drive for. Australia

[@curtscafe9497]

How many days did that take

[@thomasrochon6670]

How do you tighten the bolts with no sockets??

[@c.t.2152]

Ever Price a Factory 5 kit car ? You need about $30 ,000 just to get started . I would use a Lincoln mark Viii For the Donor car but still it would cost around $25,000. for that much money you could just buy a used HO mustang or dodge hellcat . 345 HP for a $10,000 Motor is no bargain . You have 20 Guys and a $200, 000 dollar shop and I could slam one out too !

[@machinist7230]

In terms of bang for your buck, its hard to beat an LS crate motor, especially ones built by third parties - for roughly that same 10, you can buy a 625hp, 427 ls motor from Summit.

[@bigsean2473]

@@machinist7230 id just get a 6.2 with 700hp for the 10

[@ronaldkellams6917]

I would love just to cruise

[@StreetRodJim]

I am building one with a weekly vlog on KZbin right now and it is definitely not just Drill, Pop Rivets And Rattle Can. I love PowerNation but this title is a little far fetched. My channel shows the real trials and tribulations. But it is fun! LOL!

[@corradoracervwvrt8276]

ohh wow! Simple great build

[@chriskelley1115]

Oh how i wish i could have one of these. But no point in building something i can fit in. @ 6'8" tall id never fit. But oh how pretty.

[@otsenres1636]

I want one....😎

[@8elalacran]

Can I still be able to buy this ‘32 Roadster ? and what exactly are the items ? .. fuel tank , power steering, engine , headers , radiator , tranny - and Rear end included!!!!?….

[@Derkenblosh2]

My wife would look hot driving this... Would probably get a a 3L 400hp diesel powerplant in the future ☺️

[@miriamvillarreal-wilson6418]

It blew my mind when I saw them man handle that engine in at first. That's a nice plastic piece for mock up though.

[@petsatcom]

Does it need fenders to pass state inspections??

[@kevinsenesac3187]

Can you have cruise control on a car like that

[@kevintucker3354]

If the caliper paint is heat resistant then it’s going to block the heat from naturally moving from the interior of the caliper to the exterior and to the atmosphere....it would be like a thermal block.

[@296jayce]

it would keep the fluid from boiling. the heat gets transferred out by the rotor.

[@mruble38]

btw i would give anything to get a car like this. I love working on things, and this would take it to another level! :)

[@trillrifaxegrindor4411]

if you have 40-$50,000 you are all set!!

[@anibalsoto4809]

Were can I order one

[@wickedsnake8032]

I would drive it like Pat nice and slow.

[@Dan-lq5wg]

Any chance for the right drive? please

[@jasoff666]

No special tools needed, but if u have a plastic 302 laying around it’s good for fitment

[@synapsesuicide4372]

I wonder if you could squeeze in a Ford Triton V-8 or Triton V-10? That would be overkill, but there's no replacement for displacement!

[@nosnerd1967]

Visiblity is good lol

[@tootall5559]

I've never thought no fenders a good idea. You might as well just paint with primer, because at least where I live, you'll be dealing with stone chips all the time.

[@fanoftheshow1724]

Car is so modern it doesn't need fuel lines brake lines or an electrical system. Truly amazing.

[@TheBraddles82]

So all those bolts, wheel nuts etc are finger tight?

[@isaacwatanabe9599]

This is a cool ad ngl