BUILD NIGHT ROD CUSTOM HARLEY DAVIDSON

[@mustang8812822]

I give it a 9 7/8ths just cause i like black more lol. Definitely need lots of patients, but it's a must for the over all look.,,,talking about the wires.

[@lightfoot652]

A+ for all the info on cost and A+ for showing the process,not many ppl show everything needed and show process as well tku gorgeous bike...

[@yeetxd4219]

only thing i would have changed was the exhaust to a vance and hines and put some fat tbars on it. also lower it

[@2387amike]

What style of handle bar is that called

[@mustang8812822]

I know what she sounds like lol,,,,,,but I wanted to hear what yours sounded like...you did a lot and was under a grand,good deal.

[@martybrozek7973]

Definitely looks a lot cleaner. I have an 08 night rod special getting ready to do some of the same mods, just got through with stage 2 cams and injectors.

[@dumhed100]

Marty Brozek what cams did you use?

[@justin10310]

Links to the mods ?

[@push_usmvmc2897]

Very nice can get a regular v rod for pretty cheap and customize it job well done

[@JL-wf2wp]

Wow 👍👍👍👍👍 love that handlebar

[@DeusVult1775]

That was a great looking bike. Nice work.

[@heavyonthewrist2666]

How do you wire the standard indicator with 3 wires to the new one with 1 wire??

[@brianr5356]

Excellent job 👍

[@darrylparsons9235]

you cannot use the stock exhaust gaskets with DanMoto. You need to buy Cometics C9928 gaskets

[@cvzanikos1]

Can you please tell me where you got the handlebars? I was thinking of drag bars. I'm 6,1 and looking for a farther reach and really liked what you got there.

[@mikey289cui]

little secret on the handlebar wiring: there is a tab in the connector, pull it out and you can remove the wire including the pin so you don't have to cut and resolder the wires ........( make note were what wire goes in the connector...)

[@eduardoalcantara8356]

Do you have any problems like burning with this exhaust pipe near your feet? Do you recommend some thing?

[@安家芝城]

is that handlebar comfortable for long trip? im 6 feet and 4 inch, the stock handlebar makes my back sour when riding more than one hour

[@johnhines662]

I've done many of these projects on my 12 VRSCDX. A few comments for those who may do any of these. Buy a Harley pin tool and connectors and go to the harness when you wire, you will save hours on this project and have a professional job. Always Put a fuse in 5A over the battery charger rating in line on your battery charger lead.

[@lovepreetsingh-si8kg]

Beautiful

[@BBlack247]

If its possible may you post the links for the parts you bought?

[@arielventura6880]

Did the gaskets for the exhaust come with the exhaust?

[@TheWillyjeff]

Do you have the links for where you bought your stuff?!?!

[@kenstar9991]

Needs to be lowered to make it look mean, also did you change the stage # since you did install new pipes

[@richardsavacool6261]

How about a new Seat ??

[@jaylee2667]

wow, it looks nice and did a good job.

[@piruboy69]

Hey, need help installing my led tail light, it was sent to me without instructions. Given that the turn signal cable is also the brake light, my brakes are yellow instead of red. How did you managed to get the brake lights to be red and not get overpowered by the yellow?

[@batmangarage]

sorry i dont remember now but you can see at video instalation paper manual

[@apstunt]

Can you solved the issue? I have the same

[@jorgebonetrodriguez3022]

Nice video!!!👍👍👍

[@aldoespinosa2443]

great job dude!!! thanks for for put it on, Im in Mexico its impossible to take my bike with you, but I will tried to do something like this, I bought the headlight but something happend with the rest of the lights and later dont star engine, its wire, I bougt one plug and play headlight it flash ok works ok, but 1 o 2 minutes later just go bad. thats any way

[@sabattusoconnell938]

Thank you, man, this video just made my life complete

[@wolfmantrucker1541]

Thats a cool song, where i find it

[@702Overlanding]

Good job. Well done

[@cvzanikos1]

Do the mirrors hit the tank or knees?

[@batmangarage]

HELLASgate7 if you setup right, is ok

[@cvzanikos1]

Thanks

[@cvzanikos1]

I'm trying to measure but I'm not sure how tall are you? I'm 6,0 ft. Trying to avoid having a return. If you tell me how tall you are maybe I could estimate. Thanks

[@batmangarage]

hi i am 183cm

[@andrewwood640]

The wiring through the handle bars has no outer sleeve to prevent their insulation wearing through where they will rub on the edge of the holes in the bars. If it doesn't rub, wear through & short out then you got lucky.

[@AllenBoxingClub]

Great work man

[@walidishtay]

can you give me the link of the license plate holder, handle bar and mirrors please...sick bike man oh btw how is the danmoto? recommend it? I'm thinking of buying it

[@batmangarage]

sorry dont have lin but everything its from ebay. for danmoto exhaust its good , i am happy with sound . not so good like vance hines but for 300usd you have simmilar product

[@audirs6avantc824]

Hey are u in Seattle? Do u work vrod muscles too?

[@cumminspower6147]

Good job bro 👍🏾

[@batmangarage]

yes but after some rides its everything right

[@Majatecks]

Henry HPH I noticed you have uneven tire wear, where the rear tire is wearing more on the left. Did you ever get that looked at? Mine is doing the same thing.

[@push_usmvmc2897]

Exactly what I would do if I got a v rod

[@batmangarage]

yes is it , i am drive 500km for daytona bike week, no problem

[@jaguarf-type9646]

😍😍

[@irvin69330]

good job Bravo

[@AbhijeetShinde9]

Awesome

[@gopugopukj4057]

👌👌👌👌👍👍👍👍👍

[@wlacastro]

Maravilhosa !!!!!

[@maxheadroom8097]

I would not let you touch my V-Rod

[@nizzmo100]

You have probably found out by now that Danmoto exhaust Is the biggest piece of shit you can buy....I found out the hard way .

[@wayneeden98]

Well, people I'm gonna put it like this, a lot of people are making videos about their vrod,s ,well, I think is in it's own right, I just read something that Harley davidson is putting out a possible aftermarket belt driven impeller supercharger, well, I guess it will apparently work, and to my own opinion, I don't like it at all, their supposedly mounting it in the wrong place, for what the general public of Harley davidson vrod bike riders that have made the vrod out to be what they want it to look like, considering the old traditional style that the original Harley davidson has been for years, well, that's ok, if that is what you want, apparently not everyone wants the old traditional version, I am one of those who can admire the bike from a distance, with out ever sitting on it, and considering known existing bikes that are around the country, I'll take the vrod over the traditional any day of the year, and for the gas tank being under the seat, o well what ever, but if Harley davidson bike is gonna have a supercharger on it, then some one should replace the top tank/air breather out for a supercharger in it's place, placing an supercharger on top where the air breather is, that would make 500 more sense, all they have to do is gear it up ,anyone ever hear of 45 degree gearing and belt drives, believe me, it's very possible, if I had a vrod and the other equipment I would be doing something about it, I think that's why they call it engineering and design, [e-mail]

[@mayna4]

The music is horrible!!!

[@batmangarage]

sorry never learn, just russian😂

[@Waaks]

How can you put Chinese parts on an american bike? Butcher

[@batmangarage]

you will be suprised how many chines parts its on americans products, btw apple is all made in china😂👍🏻

[@Waaks]

ENGINE EDITION yeah but you added it tsk tsk, give a damn where my phone is made, would not put Chinese parts on my Harley and feel great about it cos I saved a few bucks

[@Forever.Remain.Nameless]

​@@Waaksand now Harleys aren't even made in America anymore 😂

[@maxheadroom8097]

Were did you learn how to spell

[@GTOJeremy]

Sooo many hack jobs here...