BUILDING A BIG TURBO D SERIES IN 10 MINS

[@gambit_toys6554]

People underestimate the D Series because of stock form. Aftermarket support HUGE: Forged Pistons, Rods, Sleeves, etc.. Can easily boost it over 400hp

[@underestimatedgarage]

thats facts with the right tuner, right fuel and good build you can even make more depending on how deep your pockets are

[@Ray-up6zs]

This was awesome dude

[@underestimatedgarage]

@@Ray-up6zs Thank you

[@konholio2]

Is your engine still doing ok, what boost are you running. Ive been told multiple times that everything above 15psi would eventually break the crank. Have you a dyno sheet ? Thanks in advance.

[@underestimatedgarage]

i should be doing doing in a few weeks ive have my boost cut on at 10lbs, theres alot of people that push limits on d series engines , iam running a stock cranck still holding up strong, im shooting for a 400-500 range but my whole motor is build only stock is the trans , my fuel lines are upgraded as well to 4an's line. ive over boosted to an thank god it still hasnt send to the moon

[@dougqick]

from what i have learned the crank isn't the weakest point its the cylinder walls cracking after 400hp all tho i have run 30psi threw my built y8 with stock cylinder walls and so far am ok but i also have a block guard definitely need to run a d16z6 crank tho best for a d series

[@h3xd3m0n9]

​@@dougqickcracked my block after 2 years running 40 psi building another motor gonna fill the block this time

[@cedriccope178]

I've read that the maxpeeding rod turbo is good for sohcs

[@underestimatedgarage]

Hoping on it so far soo good 🙏🏼

[@kareemmohamed701]

false i’ve had my max speeding rods turbo for a year doing great!

[@underestimatedgarage]

@@kareemmohamed701 for a year? what happen

[@kareemmohamed701]

@@underestimatedgarage still running strong no rebuild 30 psi still running strong

[@underestimatedgarage]

oh yeaaah! 30 psi!

[@robertlambert7906]

So is that a bottom mount turbo kit with a hood exits dude I can’t find a pipe anywhere

[@underestimatedgarage]

i did mine on my own until i change it to a top mount with a hood exit , when it was bottom mount i just did a hood dump first weeks ran it with no hood, than i did a bumper exit for a long time

[@robertlambert7906]

@@underestimatedgarage what’s up sell me the old hood dump

[@underestimatedgarage]

@@robertlambert7906 id give it to you if i still had it but i dont 🥺 gave it away

[@robertlambert7906]

@@underestimatedgarage dang it make me one lol

[@underestimatedgarage]

@@robertlambert7906 ill have to see if i still have a flange and some pipe at my storage

[@jdmchickkustomz9417]

Hey that was a pretty badass video!! I have d16y5 needs rebuilt and want a turbo. The engine is old knocking leaking and burning oil. Wish me good luck any pointers or tips appreciated

[@underestimatedgarage]

for turbo id recommend doing upgrade oil pump, Get some eagle rods and vitara pistons bang for your buck you can get the kit for around 400-600 bucks Polish you crank and check its still good also your bearing clearence

[@jdmchickkustomz9417]

@@underestimatedgarage cool cool ok. I'm hoping I can do this I've never done engine rebuild. Been studying videos on it and turbo setup. Thanks 💯

[@underestimatedgarage]

@@jdmchickkustomz9417 never be afraid to learn thats how i was

[@jdmchickkustomz9417]

@@underestimatedgarage well I've helped pull a 4G 63 engine for my Mitsubishi but haven't swapped it yet. Now my Civic is starting to have problems so I need to get the engine rebuilt and drive the Mitsubishi with 4g64. I am learning and excited to build both my cars 😉

[@underestimatedgarage]

@@jdmchickkustomz9417 4g64 great motors ! imagine now swapping that into a civic .. 🤯 Aslong you start somewhere and you have a vision it what matters you have to mess up sometimes to learn

[@yuno3364]

Wait a second, you rattle can that engine bay in your yard??? What paint did you use???? OMG!

[@underestimatedgarage]

i used rustoleum Satin black but no primer i used two cans of clear coat & i added my own flake by hand

[@EvansGaming375]

What you got for a tune? Street or dyno?

[@underestimatedgarage]

So far it has a base map tune on my s300 for break it in

[@EvansGaming375]

@@underestimatedgarage My brother knows a tuner in Wenatchee I just can’t remember the name atm, but my buddy trever has had a few tunes at richtuned over by Tacoma and likes em

[@underestimatedgarage]

@@EvansGaming375 think your talking about miah alteredimport yeah might be on his dyno see how much we make

[@Willis-de5hx]

Didn't say anything about what you did with the transmission.. what mounts ... Clutch etc etc

[@underestimatedgarage]

stock trans, hasport mounts, and action clutch stage 2

[@Willis-de5hx]

@underestimatedgarage stock trans help all that power? Nice 👍

[@underestimatedgarage]

@ it hold ups it wasnt alot of power on pump gas

[@Willis-de5hx]

@@underestimatedgarage oh ok .. mines a gsr trans on a built d16z6 I'm on 22lbs on 93 octane. My trans has just better synchros.

[@underestimatedgarage]

you be good its if you have more power then you should upgrade

[@legit4083]

I just got a turbo for my d16y7 I have the full kit they are charging me 3k to install it I feel like I can install it myself but I'm not sure wat type of problems I can run into by doing it myself?

[@underestimatedgarage]

3k to install? now thats alot they doing a base map tune atleast with it? i can help you out its not hard to install

[@legit4083]

2200 for installation plus 1500 for ecu,hondata,jumper harness,chipping and injectors

[@underestimatedgarage]

@@legit4083 i would only pay for ecu stuff an like some wiring but piping all that you can do your self it aint hard

[@legit4083]

@Underestimated Garage so should I try and install the kit and take the car to them after? And if I try to install it myself and I run into something I'm not sure of I can ask you or what?

[@underestimatedgarage]

@@legit4083 yes that would save you some money and you can learn as well, ill be glad to help you add me on facebook

[@popas968]

what drop manifold is that?

[@underestimatedgarage]

Company out in LA called AJP Distriburators

[@frias2287]

Nice job l have eg6 turbo swap h2b

[@underestimatedgarage]

im going to end up doing d2b 🤘🏼

[@psychoaccelerate3886]

con todo bro 🔥

[@underestimatedgarage]

gracias carnal

[@fabianrushing1449]

Out of all things go cheap on the cam gear🤣🤣

[@underestimatedgarage]

the vms ? lol

[@strawmannhonda529]

The VMS gear for sohc is true and quality. I use it for my d series 18 psi 4000 miles hard boosted and still eating vettes..

[@underestimatedgarage]

alot of people dislike them & like them but honestly ive been happy with it and i got tunning this couple of weeks

[@robertlambert7906]

This is the worst build video I ever watched

[@underestimatedgarage]

why is that?

[@robertlambert7906]

I’m just kidding bro

[@underestimatedgarage]

@robertlambert7906 😅 im like man what was wrong with it lol

[@robertlambert7906]

@@underestimatedgarage so how much did the build cost and what hp you get

[@underestimatedgarage]

@@robertlambert7906 it what about 4k and i got my numbers down on my other video in the dyno it was about 289hp and 269 ft lbs of torque thats on pump gas we dont have no E 85 on our area

[@DAV4WSR1]

Great! like that ! i do on my youtube chanel 295 HP and 377 tq with an D15Z6 at 18 psi ! CIVIC DAV4WS Slip-peut on dyno if you interesting . congratulation from France !