Building a Biggest Turbofan Engine Model Kit that you can Build! | Speed Build

[@AluminumOxide]

This is by far the best museum quality jet engine model that you can actually get at home. Unfortunately I’ve recently seen some scam Facebook and Instagram ads that have stolen your video footage and used its content to promote a fake ad selling this model at ridiculously low prices ($27.99)

[@thabg007]

I saw that fake ad also, I currently have a plastic 1, and its no where near as detailed as this 1

[@BHobby]

Thanks for the heads up!

[@Mentallybored]

When i saw you uploaded this i was so hyped because this is also 1 of my dream kits! And guess what... I also have that screwdriver set!! Keep on doing your thing😊❤

[@BHobby]

Cool! Hope you like it! Have fun building!😁

[@NigelSheldon]

@@BHobbyI too liked your video and the screwdriver and tools set. If you can, would you please sharing the link to those tool sets? They look great!

[@BHobby]

@@NigelSheldon thanks for reminding me 😁

[@NigelSheldon]

@@BHobby Thanks for posting that! I ordered them. Again, cool content, cool build and I appreciate your efforts.

[@wk961]

Balancing all the components so it doesn't vibrate would be a nice way to step it up to the next level

[@davidrestis9931]

What does that mean?

[@Vipcioo]

This means that from the red rotor to the right to the outlet, all rotors are swinging while rotating (6:41). Moreover, the third rotor from the left is also swinging. The sound you hear when starting is the rolling resistance caused by crooked rotors. Honestly, I expected greater accuracy, looking at the very precise, clean workmanship and aesthetic whole. Unless the problem is in the editing (e.g. 4:22).

[@hank9tube]

Loved that cool sound rhythm effect you did, it indicates how much effort you put into this video ...... btw the build is great too.

[@the-je6zn]

i know right

[@Guywholikesplanes936]

Sounds like peppa pig ngl

[@BHobby]

Thank You! 😀

[@ChefDuane-d5r]

Your editing is superb.

[@BHobby]

Thanks! Glad you like it.

[@alexboon]

Great Edit!!

[@BHobby]

Thanks!

[@jeremiahobermeyer1079]

This turbo fan looks and sounds amazing!

[@BHobby]

Thank You! 😀

[@Justin-wj5fw]

I was hoping someone would make a video about this one, awesome 👍

[@BHobby]

Thank You! 😀

[@gabrielchin4161]

One of your most satisfying vids. Also, this thing is huge!

[@BHobby]

Glad you like it! 😁

[@BCHonea]

Wish we could make turbofans that work that are this size. It would revolutionize personal aircraft

[@scottgahum9806]

It wouldn't work because it's sol and requires alota thrust and fuel so impossible

[@scottgahum9806]

And also humans are too heavy to carry😊

[@nickl5658]

Add another $900-$1000 and you can get a functional turbojet engine that is about the same size. XICOY X45 micro turbojet is an example. But the small the engine the less fuel efficient it becomes.

[@scottgahum9806]

@@nickl5658 agreed mate

[@scottgahum9806]

But somewhere in the future will be possible

[@XelgorBlast2]

Woww fantastica! 🤗❤️

[@BHobby]

Thank you! ❤

[@XelgorBlast2]

@@BHobby ❤️

[@dadytoyss]

Always KEREEEEEN ❤

[@Player-pj9kt]

amazing model! I wasn't expecting it to have the accessories box

[@assassinknight8861]

HAPPY THANKSGIVING 🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃🦃

[@GORT70]

Really well done video.

[@BHobby]

Thank you very much!

[@Wsportys]

I don’t see how Santa could deliver on this for Christmas, unless the parent’s are pilots, dentists, or lawyers... I don’t see how even an Airmen in the world’s greatest Air Force could rationalize a $1,000 novelty purchase, and they build them all day 😂. But I’m appreciating the sheer number of moving parts, detail, material… 🎉❤ I may have to appreciate this turbo fan on KZbin only.

[@GenXPertChannel]

Most large, complex models cost quite a bit. Take a look ot Pocher, DeAgonstini, Agora, etc...

[@Rayandemo]

you do the right choice! I like engines!!

[@BHobby]

Thank You! 😀

[@carrozero9314]

I think i know what i want for Christmas this year

[@chrisjones1798]

That was just so therapeutic to watch , I totally loss all time watching that 👌👌👌👌

[@RankinImagery]

When building, be sure that the turbine turns very easily at each stage of the build, even the slightest little bind, may prevent it from turning

[@PHANTOM-420]

Huge fan B hobby 👍

[@BHobby]

😁👊

[@robertorodrigues6692]

Very beautiful!!!!

[@txni.040]

I actually build and deconstructed these of real planes in real life and its hella hard but also very fun

[@Joke-i4b]

Yoo this shit is so cool! I wish I had enough money to buy one of these it looks so fun!

[@dariusjones6413]

That’s the most advanced piece of work I’ve ever seen

[@stuffing09]

maybe you should do a video where u show your entire collection!

[@BHobby]

I’ve thought about that, maybe one day!

[@marionfelty7247]

Needs an LED super bright hidden light string after burner. lol

[@Dimanassitto]

Где любители турбореактивной тяги ?)

[@GearSwinger]

Great video presentation and I love the cadence.

[@BHobby]

Thanks so much!

[@frezer_492]

It will be impossible to this guy be hated

[@mohammadajmin1542]

So cool mate👍

[@chibiitachi7828]

Eh eh ade plak org jdt kat sini!

[@thesaviourfromheavensunwuk9639]

Must be very expensive to get this type of thing

[@R6Siege_Addict]

It’s 1000$ dollars 💀

[@NgYinWeichenEndeavourps]

@@R6Siege_AddictwHAT

[@NgYinWeichenEndeavourps]

💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀💀

[@xenno8496]

​@EggyBoi3000 what!? For the fact it's a WORKING model...THAT SEEMS "CHEAP" I expected this thing to cost like half a mil or some shit

[@belindappitman1974]

Is not much

[@dzetech]

nice job bro

[@Rayandemo]

INSANE

[@moblades1]

I like the rhythmic editing

[@SimenRenslemo]

I wonder if it could actually run if the parts were made of steel and with a few modifications.

[@rorroryusoul]

Very cool video b hobby

[@BHobby]

Thank you! I hope you like it!

[@Woody-nc1ru]

Hook a dremel up to that!!!! 😁

[@doodskie999]

lol I have the same cheapo precision screw driver set

[@SasmithaSandeshNAWARATHNE]

I like it it’s very good

[@shawnrobinson6535]

For $500 more, you can get a King Tech K55G4+ that is a real working model jet engine that runs on diesel, kerosine or jet A1 and produces 12 pounds of thrust. Just saying.

[@GenXPertChannel]

But this one looks better sitting on a shelf... which is the purpose.

[@javierpanganiban]

Me when my alarm rings: 💤💤😴 Me when B Hobby uploads early: 📱

[@paul7359]

Nice

[@brockmeyer9387]

Engineer asmr at its f*ckin finest 🫠🫠🫠🙂

[@gabrielcox3599]

Cool! Now make it work.

[@frosty72964]

Eyes: Looks quite easy. Brain and bank: No it’s not.. I’m dying

[@ivansoh6957]

Nice Happy Friday to you and everyone. Wish you may arrange to do ASMR build the 1) Gundam -FM 1/100 Raider Gundam + Action Base 1 clear -FM 1/100 Forbidden Gundam + Action Base 4 Clear - FM 1/100 Calamity Gundam + Action Base 5 Clear 2) Lego Bionicle (set on 2016) No -71404 -71308 -71309 -71311 -71312 -71313 3) 1/72 hmm zoids - Konig Wolf - Command Wolf Repackage Ver - Command Wolf LC & AC Barad Ver - Blade Liger AB - Liger Zero Schneider Thank you 🙂🙂

[@BHobby]

I will check my Zoid Collection 😁

[@adamyassine4210]

What are the two tie rods used for? If it’s used to actuate inlet guide vanes then wouldn’t one link be sufficient?

[@MARKLOCKWOOD2012]

the build is neat however step further slow start tick tick spark igniters have it run of a jar kerosene or camping fuel have small gauges things for hung start hot start. or air start with a hopper with locking hoses more authentic working. something they can work on things like swap out the nose cone for a turbo prop

[@peterresetz1960]

This engine as a real engine is designed as a high bypass turbo fan. Simply attaching a conventional propeller up to the front of the engine by removal of the impeller would not work. Turbo prop engines are not true axial gas flow engines as is a high bypass turbo fan. You might want to actually spend time investigating the different types of gas turbine engines regarding aviation. What you said just makes you look uninformed.

[@evanscm3]

For $1000 I'd want those low pressure turbines to be smoother... sound like they're catching on something...

[@austinc1431]

Just 2 of these and some other parts and I’ve got myself a podracer

[@phoenixbda6164]

If it works, you could try to put a full casing around it.

[@belindappitman1974]

Put it on a big rc plane😊

[@Maki_le]

This is awesome!!! What camera do you use?

[@BHobby]

Thanks! it's Sony a7rv

[@justanotheranonymous4381]

It would have been nice if it wasn't just a model but something that could actually work using propane or gasoline as fuel

[@TomMcD71]

Very nice but about $1,000 OUCH still great video 👍

[@BHobby]

Thank You! 😀

[@foodie3D]

Now please add the injection, the burning chamber and a closed housing.

[@RowdyBrian17]

It's incredible how fast I went from "Oh, this would be a cool Christmas gift" to "Jesus Christ, I will never be able to afford this" when I clicked the link for this

[@sosochio4374]

It is a hobby, not a toy. But, this can be the Christmas gift that GE, P&W, CFM, or RR give to their airline customers.

[@caposey]

$1k just for this model-

[@Wsportys]

Yeah, that shock caused me some emotional damage. I’ve dreamt of having this all my life, discover it today and my heart rockets through roof. I landed on the website and gazed upon that price!? Im now digging my heart out of the earths outer crust.

[@jacekm4707]

How did they produced metal casings?

[@steelskyblue]

I hate to be negative but why is the rotation wobbly? And it has some sort of a balance issue that can be heard in the video when it's running. Is there no way to balance it or fix it somehow?

[@thaddeus5944]

you can't say its a working turbofan if it does not actually ignite fuel to spin, that's just called a model Edit: I see you changed the title, I still enjoyed the video anyways

[@AMRBRICK]

Very cool build, and expensive 😅

[@BHobby]

Thank You! 😀

[@DarkROSkull013]

Are those tools you used included?

[@riceblk8005]

How’s the parts quality ? Plastic ?

[@BHobby]

It’s metal

[@rcguy7244]

1k is insane. I like engine models, and wanted one. I cant afford that

[@ivangomez2481]

Where can I buy this engine model, how much and do you have a discount code ?

[@BHobby]

Please check the link on description. Let me know if it’s not available. Thanks 😁

[@mop_bo]

man i thought it was going to actualy work

[@williamhood9893]

are there special screws that you need a specific driver bit for or are they just regular phillips head screws? if they are the special screws does it come with a tool for them?

[@wangpie8840]

you forgot to safety wire all your hardware, engines gunna fall apart

[@HAN7207]

Scale?

[@losbopfos5637]

It would be really cool if someone like Matthias Wandel could modify this model so that it really works.

[@victorwang8377]

Appreciate it if you could tell me where to order this?

[@BHobby]

Please check the link on description. Let me know if it’s not available. Thanks 😁

[@assassinknight8861]

From Legos to do hickeys to WTF IS THAT stuff

[@CarstenBauer]

For $1000 it's quite pricey, but very nice looking.

[@mercedesbenzoid4196]

Can I share part of this video on TikTok please 😊

[@BHobby]

Sorry but I’m doing some work to take down some profiles on Tiktok who’s posting my videos and discrediting my work.

[@thirdiii171]

Where to buy? Direct me where sir?

[@dynamixsystems]

"Works"!

[@fgm1197]

No HPT?😂

[@mdkamrulhasan7912]

How can i get this type of engine, i am from Bangladesh?

[@BHobby]

Please check the link on description. Let me know if it’s not available. Thanks 😁

[@Spookieham]

Its doesn't "work". If it worked it would run on fuel and generate thrust like a small model turbojet used in RC aircraft

[@he-man168]

Woww

[@xaalii10]

I wish they weren't so expensive

[@evanschulz9704]

I'd love to build one of these. But they must be very expensive. And gunpla eats up most of my cash flow

[@usaidbashirsyed1027]

Can you put on an plane. Im an an very big fan

[@Rayandemo]

like of you like this "engineering"KZbinr

[@Cereal81-2]

It sounds like a song

[@charlien2489]

How many rhythmic song references are in this vid?

[@Seacoast68]

My father was the plant manager at an aerospace manufacturer which milled and polished turbine blades from titanium ingots. He has retired a while ago and is currently battling dementia and cancer. I'd love to build this kit with him. Has anyone here (besides the OP) purchased and built a Stirling kit? Just wondering if what you order online is as legit as the kit in this video. Thanks.

[@roepieroepie5333]

Teleurgesteld. Ik dacht dat hij echt kon lopen op benzine

[@Bod8998]

3 quid on Temu

[@romeovidalrodriguez7754]

👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@bobmckenzie6308]

Are the instructions in English? It looked like they are only in Chinese but it went by so fast I could have missed it.

[@BHobby]

I got the chinese version but there’s an english version of it after this promotion video.

[@zerosan5658]

soo evetytime you made somethig there is always a rythm, what's today's rythm name?

[@Garuda1_AC6]

I want to have it, but a 1000$ could give me so much more

[@3v249]

Must be $999.99 USD to get this thing (insert goofy laugh)

[@infinitum1697]

3rd!

[@Vel4ciTy_YT]

But that’s the plane engine

[@AM93000]

Please inject jet fuel

[@usaidbashirsyed1027]

Pls

[@Arek_R.]

That junky rattle eww