Building a cedar strip canoe!

This video covers my cedar strip canoe build, it is a summary of the full build process that is broken down into multiple videos below.
Episode 1 - What and Why - • I’m building a canoe!!...
Episode 2 - Milling the strips - • I’m building a Canoe!!...
Episode 3 - Making the station molds - • I’m building a Canoe! ...
Episode 4 - Making the strongback and attaching the station molds - • I’m building a Canoe! ...
Episode 5 - Planking the hull Part 1 - • I’m building a Canoe! ...
Episode 6 - Part 2 Planking the hull - • I’m building a canoe! ...
Episode 7 - Prepping the hull - • I’m building a canoe! ...
Episode 8 - Fiberglassing the hull - • I’m building a canoe!!...
Episode 9 - Adding gunwales and deck plates - • I’m building a canoe!!...
Episode 10 - Making the seat frames and yoke - • I’m building a canoe! ...
Episode 11 - Finishing trim and applying varnish - • I’m building a canoe! ...
Episode 12 - Weaving and Installing the seats - • I’m building a canoe! ...
Episode 13 - Walk around and maiden voyage - • I’m building a canoe! ...
If you like what we are doing don’t forget to subscribe, turn on notifications for new videos, like, comment and share.
Total Boat Gleam varnish - amzn.to/3NOPkBm
Support through Amazon purchases and product recommendations- Amazon.com/sho...
"As an Amazon Associate I earn from qualifying purchases." #PaidLink
Instagram - ...
Facebook - / seamancustombuilds
Website - seamancustombu...
DISCLAIMER - The information provided by Scott and/or Seaman Custom Builds is for general informational purposes only. All information is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OF ANY KIND INCURRED AS A RESULT OF THE USE IS SOLELY AT YOUR OWN RISK.
WE DO NOT WARRANT, ENDORSE, GUARANTEE, OR ASSUME RESPONSIBILITY FOR THE ACCURACY OR RELIABILITY OF ANY INFORMATION OFFERED BY THIRD-PARTY WEBSITES LINKED THROUGH THE SITE OR ANY WEBSITE OR FEATURE LINKED IN ANY BANNER OR OTHER ADVERTISING. WE WILL NOT BE A PARTY TO OR IN ANY WAY BE RESPONSIBLE FOR MONITORING ANY TRANSACTION BETWEEN YOU AND THIRD-PARTY PROVIDERS OF PRODUCTS OR SERVICES.
#woodworking #diy

[@jamesadowney]

This was a great step by step. I have an older cedar strip with a couple holes that I am about to renew and feeling daunted by going from simple woodworking to fiberglassing over the hard work. Your statement there really struck home to where my stress is. Nice to know I'm not the only one.

[@randywarnock2937]

I built our first cedar strip canoe in 1992. It was a 20’ E. M. White design. We have canoed many expeditions with it in many kinds of waters. I built our 17’ canoe 24 years ago and it has been on many adventures. I am now building an 18’ cedar strip canoe for my wife. She loves the 20’ canoe but it weighs 100#. I am building this one as light as I can.

[@TotalBoat]

Your talent and attention to detail really shines throughout this build! We loved watching it come together, beautifully done!

[@seamancustombuilds2553]

Thank you so much, appreciate the kind words

[@desireehelms8012]

How do I send you an email requesting your opinion on a bigger Cedar Strip Canoe for days on the water

[@adow7382]

Beautiful piece of work.

[@elihuthompson626]

Sweet build

[@okiebrave1932]

awesome! Thanks for naming it ERMA

[@seamancustombuilds2553]

Thanks for watching

[@davidrobins7753]

Congratulations on a beautiful build of your Cedar Strip Canoe. I love the choice of the name.

[@mpccenturion]

I Like the weave. Nice idea!

[@seamancustombuilds2553]

Thank you and thanks for watching

[@robboholleran9666]

This is about the best a to z video. Thanks. I'm on my 2nd adk guide boat, white cedar.

[@seamancustombuilds2553]

Thanks for watching and commenting, I hope your build goes great

[@HexterTheJexter]

WHAT A GUY! Readily admits his mistakes! End RESULT FANTASTIC! Well Done Mate!

[@danielmoore7039]

Man cedar makes a beautiful anything but a boat for sure 💪Erma was shining in the back yard

[@danielmoore7039]

I subscribed just seeing the boat paddle when I seen the boat I was wanting to subscribe again 😆

[@mblatner]

Let’s see it floating

[@nanaowusuaghana7559]

Hay thanks my class teacher gave as project work to make a booklet about canoe thank you for the tips🎉❤😂🎉

[@gbjones54]

Way to go Scott!

[@seamancustombuilds2553]

Thanks Gary!

[@Captain-ln3vh]

Great build.

[@seamancustombuilds2553]

Thank you!

[@markfilosi6967]

Super nice job! Looks awesome.

[@seamancustombuilds2553]

Thank you and thanks for watching!

[@joaobatistalemos1980]

Belíssimo trabalho! ... Uma verdadeira obra de arte.

[@artfisher1235]

Gorgeous

[@seamancustombuilds2553]

Thank you and thanks for watching.

[@daveveryser6811]

Inspiring it is!! Very nice

[@seamancustombuilds2553]

Thank you so much!

[@manolhsmanolhs1508]

You make a very nice job! Where can i find the constructing plans of that canoe? Many thanks in advance.

[@pamr1]

Super talented!!!! Awesome project

[@seamancustombuilds2553]

Thank you!

[@johnschuster9192]

Awesome video!You have chemical trails in Tennessee just like here in Oregon...My wife wants me to build her a strip wood canoe...thanks for the tips!

[@seamancustombuilds2553]

Thank you for watching and commenting. Good luck and enjoy your build!

[@RKAPPLEBY]

Nice job on your build - I really like the look of this boat - are there plans available anywhere?

[@JamesKing-jw6hs]

That's pretty man, great job

[@jarrodcrawford]

Nice build!

[@seamancustombuilds2553]

Thanks and thank you for watching.

[@erwinvanherle469]

Awesome job ❤

[@fredchainring6728]

Looked like a lot of knots in the cedar, especially some large ones. Did you cut out bad spots and scarf joint any of the strips to limit waste and eliminate weaks spots in wood, or did you figure the epoxy would take care of it all?

[@davidtorres1157]

hermoso trabajo maestría total

[@Markrodriguez-y6m]

looks great! how much does it weigh?

[@LindsayChristine-u3z]

That weaving, 😮❤

[@jaisoncarvalho86]

Is a amazing canoe!It was spectacular!!!!!!!!!!!!!

[@seamancustombuilds2553]

Thanks so much!!

[@BramBiesiekierski]

Thats a great build. Its a shame the video resolution/quality was so bad. Would have loved to see it in more detail

[@andrewpetersen595]

Looks fantastic. Do you have a weight on it?

[@seamancustombuilds2553]

Thanks, it’s 64lbs

[@paulobaptista6026]

great work!!! nice touch naming her Erma. beautiful name and canoe! how much does it weigh?

[@seamancustombuilds2553]

Thank you for watching and commenting, it weighs in at 64lbs

[@dennismacwilliams196]

How many hours do you think it took to make the canoe ? Thanks

[@seamancustombuilds2553]

I had a little over 200 hours in it, thanks for watching

[@Lazarus-aap]

Looks amazing! Any tips&tricks on what to do to don't do? You've mentioned a few don'ts but maybe you've learned about some other stuff now that it is done?

[@seamancustombuilds2553]

Thank you and thanks for watching. I wish I would have done a better job putting on the bead and cove, made sure the strips were tighter when putting them on the forms, been a little more careful sanding the strips, wipe off epoxy drips and runs before it dries, I think that might be it

[@Lazarus-aap]

@@seamancustombuilds2553 Thank you for your answer! I will take these into account once I start building my first wooden canoe. I am building one from fiberglass at the moment, but I don't like the material

[@bangtigo1260]

Cool

[@abbeyseaman128]

I like this

[@seamancustombuilds2553]

Thanks!

[@frankbalcer9022]

what weight cloth did you use?

[@carlhornback5087]

I'm having a problem getting the strips to lay flat on the stations, Any help

[@seamancustombuilds2553]

Are you stapling or using clamps?

[@carlhornback5087]

@@seamancustombuilds2553 just clamps, I first tried staples but they would pull out when I bent the strip, was using T50 9/16 staples, do the sprips have to lay flat ?

[@stevemccormick4938]

@@carlhornback5087 Yes, or fairing will be a nightmare and you will thin the core too much in doing so. Use what even tools you need to flatten them. I glue a strip on the station mould back from the edge then install a clamp. I have also used rubber bands to do the same. I cut up old bike tubes for rubber bands.

[@joshuapruett1238]

Can I use Red Elm lumber?

[@seamancustombuilds2553]

I don’t see why not, I don’t know how the weight would compare but would probably be beautiful

[@robboholleran9666]

Elm is good for bending. And you can accent with the sapwood.

[@Giovanpire]

👏👏👏👏👏perfect

[@dennismacwilliams196]

What is the weight about ?

[@seamancustombuilds2553]

It weights 64lbs

[@desireehelms8012]

How do I hire you guys to build my Cedar Strip Canoe?

[@joecool8427]

I am trying to find somebody that could build me a canoe, coffee table. Please let me know if that is something that you would be interested in talking about

[@seamancustombuilds2553]

Thanks for watching, sorry I’m not taking on any commissioned projects

[@robertbolding4182]

I bet you wish you had never used epoxy to fill gaps. You can think Bear mountain boats for that

[@dannytaylor6066]

I been wanting start making them. Where can I get the planes

[@PrimetimeNut]

all that work and you don't bother to use clear cedar?

[@estrelladeldesierto66]

👍🏽👍🏽👌🏽👌🏽

[@seamancustombuilds2553]

Thanks for watching

[@desireehelms8012]

I would like to pay for one of cash up front much better to buy one hand built than to buy one from Bass Pros shop

[@nanaowusuaghana7559]

Buulo

[@Itwillbeoversoon]

Nice canoe on the water. Deadly chemtrails in the sky.

[@gregkosinski2303]

Haha seaman

[@nanaowusuaghana7559]

Gregkosinski2303 is laughing at you he called you seaman

[@Murphthemick]

Why is the thumbnail the canoe full of water 🤣🤣

[@seamancustombuilds2553]

It’s not full of water, that’s the shine of the varnish

[@unit0033]

brave putting epoxy on without masks