Building a MONSTER EJ205 For The WRX! - Time for BIG BOOST!

[@boyscouts2010]

I have never clicked off of porn so fast in my life.

[@Voxx0086]

You just made crack bro 😂😂😂😂😂😂

[@zippyoya]

Same

[@DatBoiOrly]

Man I've seen this exact same comment four times today

[@PACKERMAN2077]

*_PULL OUTIUM!_* *_UN HANDIUM!_* *_CLOSE TABIUM!_* *_WATCH GINGIUM!_*

[@PontiacAztek-2005]

69 likes hmmm

[@alstanski7600]

The way you stretched tested the rod bolts @ 5.20 and did it in the vice like that is a No No, that's a real good way to twist the conrods like that

[@Mark-hs7sk]

Chill music.... the sounds of wrenching on an EJ.... great video bro!

[@Mark-hs7sk]

Also, I've been watching your videos since you did your original battle of the builds on Forza... then stayed for the real-life content. It's been fun to watch you grow!

[@quixotic.5517]

Lemme ask the important questions here. Does he vape?

[@PACKERMAN2077]

Not anymore, real fans would remember that video.... Also he no longer drinks soda or masturbates, Audrey has made him a better man. 😇

[@amberionik]

@@PACKERMAN2077 i rhink he meant the subaru engine guy...

[@lemuhnn]

@@PACKERMAN2077 pretty sure he was talking about the subie guy

[@royramalingam5247]

@@PACKERMAN2077 tf calm down

[@konstantinosprouskas8106]

@@royramalingam5247 calm down for what? He is calm. He just misunderstood the question. You should chill tf

[@simonfozzy8061]

These videos are really getting me motivated to fix the ej205 I have sitting in my garage on an engine stand for the last 2 years.

[@AngySumo]

Do it if you bad! 🤙

[@zippyoya]

Update log 10/7/19 Wrx -added wrinkle red -recoded the motor to make sure it’s good (it was a free model) -the crank has some bugs Other -added a professional -added measuring equipment -added ring grinder (better than an angle grinder) -added some long yellow thing (ima be real wit u I have no fucking clue wat that was)

[@garlicbreadjenkins5780]

11:42 ? 1 meter spirit level

[@zippyoya]

RandomGamer 😂 thanks

[@garlicbreadjenkins5780]

@@zippyoya np

[@adiriko]

Added weed grinder

[@Helloski12345]

Jesus how long have you been doing these

[@rexxdrive2079]

*Next video:* "Why I'm keeping the WRX."

[@davidfletcher4016]

13:16 freaking pro tip of the century for anyone doing a quad cam subie timing belt.

[@davidfletcher4016]

It’s not fun but that time stamp was my Achilles heel reassembling.

[@benmolnar1259]

Wow! I really didn’t expect a working motor this quickly after the initial failures it showed! I am very proud of you Caleb! You are treating us very well my good sir! Thanks!

[@Helloski12345]

Still remember when you got the rally miata and were talking about doing this also 2nd Subaru of gingiums for those who know

[@MetrohMan]

Except he wont do the swap. Guarantee

[@boxr_4214]

just sayin, he explained what he's doing with the ej205 already. he just wants to make it run in the bugeye first, to prove that it works. once it's been proven to operate fine, he can do the engine and awd swap into the rally miata and will know that any issues he experiences have nothing to do with the engine itself, making any problem finding/solving simpler and quicker.

[@kostaspolichronis]

You already in terrible need of the comma

[@whiteboywesty]

honestly ging, one of the best youtubers out there. you dead ass made a job so much harder just bc we asked for it... don’t know many that would do that! thanks for your time and listening to us 😭

[@alexandernevell6721]

This is why I watch this channel because you listen to people Good job ok building it over buying it

[@dapetdetective]

Throwback to the wagon! Actually got me to really get into my old wagons too. Miss those days but super excited for this thing! Super cool to see the down and dirty for building a motor properly.

[@drd3942]

Great job!! I hope that you will upgrade visually the rally miata ,because at this point doesn't deserve such a nice and clean engine.that's my honest opinion.

[@trendliners9658]

You should do more cooperative videos in projects. A good way to learn and have fun.

[@JFish5]

Can you do a price breakdown on the engine build ?

[@willferland]

Watch him just keep the wrx lol

[@guidosaur7506]

You know it lol

[@david.carreira]

Rusty lifted miata vs a newer, less rusty car? The decision is easy for me...

[@richkid620]

He keeps talking about needing a daily so I wouldn't even be surprised or upset

[@XxJermanator1xX]

Watch him put the old miata drive train in the wrx as a daily 😂😂😂

[@Draft_7]

The miata is cool and all but its a miata lol

[@HARaZAC]

This is by far one is the most interesting videos you have made, I love this. As a Miata and Subaru owner, this tickles the right spot. Also those better be unequal headers ;)

[@NEutebach]

you should definitely keep the WRX and build that as another project

[@_Gingium_]

Its possible 😏

[@Jeremy_Hill_2020]

@@_Gingium_ 👌

[@Jeremy_Hill_2020]

@@_Gingium_ when the Subaru is in the rally miata, what engine would you put in the WRX?

[@RobertBrolo-l3q]

​@@_Gingium_😮😮😮😮💪💪🏆🏆🏆

[@Carnerd101]

Dude has all the cool tools.

[@THEpicND]

I love how ocd this guy is it really shows he does good work

[@alexstromberg7696]

I really hope those "torque to stretch" bolt are good. Or if he just thinks that a good thing. Otherwise he should have just torqued to the specified Newton meter.

[@THEpicND]

Alex Strömberg torquing to spec just says the amount of applied force you put on a bolt, it doesn’t actually say anything on how he bolt is holding, what he measured was the strain on the bolt which is much more a measure of the “tightness” of a bolt

[@alexstromberg7696]

@@THEpicND most engine bolts don't have a specified "stretch". Often they are first to a nm, like 60, then to angel, like 90 degrees. Not this shit. I work in a Volvo CE workshop for reference.

[@THEpicND]

Alex Strömberg what you do is the simplistic way thats good enough but measuring strain aka the bolt stretch is more accurate

[@THEpicND]

And the torque and angle technique is literally a simplistic method for bolt stretch

[@shawhavy]

Way to go..... I'm building my 3rd engine currently 1.5jz

[@ineedmoreroom7495]

I like to see the different ways in doing this type of stuff. Watching itsjusta6 build an engine now he is building an engine. It's cool to watch all the different ways and tricks to doing this stuff

[@WioPerca]

I‘m watching the adds because that helps😁🤙🤙

[@konstantinosprouskas8106]

*s

[@WioPerca]

Konstantinos Prouskas fanofankle Ooouuu thanks 😅✌️

[@konstantinosprouskas8106]

@@WioPerca ❤️

[@redchris97]

11:42 I learned something new today, it has never occurred to me to do that when I built a couple engines in the past.

[@redchris97]

@prestige worldwide wide wide wide wide no, to check head stud height with a straight edge

[@southerntiessxs1515]

So glad you didn’t put it back together stock

[@802Garage]

Just had an idea... Inspired by that Prius at the car show... Cummins 4BT Ralliata instead?

[@jakeh.5014]

It’s always so strange seeing these built. I build V platform engines and occasionally the inline 4 out of my e21 turbo century. I haven’t done anything to a boxer motor before, that looks fun

[@rh2racing]

Measuring is to building engines as sanding is to painting

[@moeedramay]

Been here for long time i love your work dude One my my fav car channel

[@supercarmio]

really nice video man, super relaxing watching you guys put that all together 👍👍

[@amberionik]

Wow you grew 25 000 subs in like a month

[@glenjohnson5809]

Spend more time with car guys like him. Quality work.

[@arthie553]

please keep this WRX.. it's about the time for you to have a daily, Gingium

[@garchompy_1561]

hey, If you wanna keep the WRX once youre done but need to swap out the drivetrain to the mx5, maybe you should put in the bigger, F6 engine and such from a legacy. or If you can find one, a porsche engine?

[@alexgherghiceanu2094]

A porsche f6 would be the coolest thing ever

[@ahmadabughonmi1045]

Great Job Homies, that was one of the best Subaru engine rebuild ever

[@DuncanBentonGarage]

@10:40 when the music paused my heart dropped i thought you broke a ring

[@holidaydavontia]

I can’t wait to get a wrx I’m building it for sure

[@chaselewis24]

I hope that was an upgraded oil pick up that you installed. Factory EJ205 oil pickups are prone to failing at the brazed joint which will starve the motor of oil. KillerB, IAG, and Moroso all make replacements.

[@LocoRocoNL]

Those 17 Minutes and 30 seconds went fast.

[@uriahgarcia3329]

As soon as he slaps it all together, he's gonna fall in love with it and wouldn't be able to bring himself to tear it apart lol. Maybe he'll buy a rando wrx engine for the rally Miata project, but considering most of his cars have been grenading themselves, keeping the wrx once it's fixed would be a good idea.

[@RantzCore]

Congratulations Caleb on your rebuild! I look forward to your next video. Best wishes and Peace Out!

[@clayshelman2019]

11:09 why the crank stop spinning ??

[@13geeky]

That red is going to look so good in the engine bay. Can’t wait to be able to buy my own subie!

[@jordanlatta]

Reminds me of a SubiePerformance video, but with more dirt and less daschaunds...

[@velyokukov]

this guy know a lot about engine assembly

[@alstefan4814]

and twisting and stuffing up a brand new set of conrods too....

[@Jsmoove917]

I wish I had a Subaru friend like Zach. I want to build my 205 at some point but all the people with the knowledge don’t help out like that around here. So looks like I’ll teach myself like I do most things. Currently my ej205 has 216k on the OG motor. Been FBO/tune for years now but to say I’ve gotten bored of the stock turbo is an understatement lol. I know once I go bigger turbo I’ll end up having to build the engine once it gives out lol.

[@drewtramp1577]

Cool. Im about to rebuild my 2002 bugeye also. Silver like that one. It looks like it gonna rip!

[@LukeTheJoker]

That was great to watch, a real step up for the channel!

[@dougsfan9984]

Very nice! Happy for you! Thanks for great vid!

[@crealmckee]

Built the engine but kept the stock oil pick up ?

[@BP-fx3qc]

Big mistake

[@Belindaxtz660]

BUILT Not BOUGHT....👍😉 also it's far more satisfying to make your own parts as you do .... motocraft artristry? 😚keep up the good work GINGIUM this was an excellent vid that kept my attention all the way through! So glad you decided to go the long route and craft a result👍

[@KDD8]

13:49 Oem subaru oil pickups are known to fail at the welds. Rookie mistake.

[@Taylordrifts]

YOU HAVE TO PUT THE PISTONS ON THE RODS IN THE ENGINE!? WTF That's so weird. lol

[@StovallsGarage]

Never realized how small the crank is in those cars.

[@quam0091]

Solid video! A well spent 17 minutes.

[@SirDavothe2]

Damn he is doing it properly!

[@victor440_]

That was awesome that you had someone to help with that great job 👍 thanks

[@eel1331]

This dude builds engines PROPERLY, with HELLA measurements. I think he's going a little overboard but that's just added security. No harm in that. Id rather him than someone who doesn't do that

[@_Gingium_]

Haha exactly!!

[@MotorStorm]

Maybe you could have taken the opportunity to cleanup the block while it was disassembled? It looks a bit dirty compared to those freshly coated intake parts

[@ervn2466]

Thought you were building the motor for the Miata immediately

[@josephbucko]

You should get a killer bee oil pan because the stock one dosnt have baffles and that's why alot of Subaru have oil problems

[@802Garage]

Hell yeah man! This is awesome. Really glad you decided to rebuild. :)

[@dunkedoreo]

I saw Zach and thought “Omg it’s Post Malone”

[@Voxx0086]

I ve been fuckin hoes and poppin pillies man I feel just like a rockstar....

[@tylerely10]

Caleb I just wanted you to know I be watching since the video called saving a Miata and loves all the videos since keep up the great work

[@natewarda2205]

This was a really cool video. Can’t wait to see it driving.

[@stevengary1989]

awww how cute little baby turbo

[@mx5_enigma308]

Super excited for you man! After the bus debacle your coming out strong with the subie👌

[@_Gingium_]

Hell yeah. Thanks man!

[@JaySwift]

this vid was very relaxing haha

[@Supradrew]

Great video Caleb. That Subbie engine looks awesome.

[@Don_Melon]

YES, FINALLY!!!

[@Darthadios]

Next time you probably get the Soobaroo on the road.

[@masoncummings5868]

Keep the wrx! And drive it to subie fest nov 23 in florida!

[@macaulayholland3516]

good job nice to see it running

[@alstefan4814]

The way his Checking for rod bolt stretch and the way the way he did it @5.05 on the vice twisting the rod like that like seriously does he know what his actually doing? congratulations... he just twisted & stuffed your conrods!

[@BradyBell33]

Stock STI turbo? You’re already building it, may as well get an upgrade like an FP blue or somethin.

[@timothystrunk7323]

Goodjob man 🤜🤛

[@kattsen5829]

to think that some forza dragboie went and actually built some dank ass cars. damn man

[@llloyd4]

Look at you, Gingium. They don't make what you need you go and build it yourself. Keep that up and we'll make an enginerd out of you yet. :D "Don't have a longer banjo bolt so I made one." :D

[@AnythingJoes.]

Hell yeah man!

[@adamroutley]

I love this shit!! I could watch this all day long.

[@Swerv.and.destroy]

Oh fuck yeeeessss I was avoiding these videos because I thought it was just gonna be dropping a new engine in without building it!

[@lou041000]

Ah enfin ! C'est bien merci !

[@camdenr2906]

I know it's not really your thing but it would be so cool to see you get an early 70's Chrysler product with a small block and work on it, carbureted cars are a completely different animal and a lot of fun and mopars are typically pretty cheap to work on so it's the best of both worlds

[@Lightsout89]

Now im no genius by any stretch of the imagination but @ 5:49 when his torquing them con rod bolts you actually see the conrod twist and flex in away im not thinking it should nor was it designed to do and for a guy that's going over everything to make it dead straight his doing a awsome job to create some unaligned shit down the road and hey like I said at the start im no subaru guru but it definitely caught my eye

[@florin_opr4640]

Thanks Zack!!

[@rv9990]

Caleb! You can swap the 1.6/1.8 out of the miata in the subaru! Would make for an cheap original and relaible car!

[@MetrohMan]

My god that'd be one dog of a car.

[@wowdogeful]

3:20 yo I just realized these are the old cupboards from the first bus interior

[@TheOscarStjernfeldt]

Nice! You really do impress!

[@forrestclark6069]

17 minute video? ohhh yesss

[@Dumbass_mechanic]

I don't know how to build a motor, so here's THE Subaru guy of the midwest...

[@JEgkt]

you could of gone with killer bee oil pickup and baffle pan.

[@joshmorgan7639]

I love gingiums videos

[@MuckG]

Quick question if you see this. Did you put any rtv on the valve cover gasket or none at all. Also how has it held up?

[@LoneRevD]

Looks great. I'll admit when you said you wanted to build a engine my cringe factor went (like, omg this is NOT the engine to try to build if you've never even done one) nuts, once I see you have a soobie dood that was careful I calmed down lol...

[@Voxx0086]

You should seriously stream minecraft since winter is here and hope Mr beast finds you to be donated like $20k

[@FeralGhoulash]

I personally think the bug eye is the best looking wrx

[@layesse1]

Yea It and the older gc

[@damianhuff7179]

She looks pretty my guy👌🏽

[@GIXXRBRAH750]

So exactly what mods you got? I’ve got my 02 Wrx Process west CAI Process west fmic VF22 (about to upgrade to a 2971 maybe) Process west tgv delete Process west fuel rail 1O5OiD injectors 340lph fuel pump on e85 I’m thinking about adding Brian crower cams JE pistons etc what would be the best route or should I just get a ej207 that’s already got forged internals etc from factory? Or should I build a weapon Ej205? Lol

[@aaronhuffman6922]

You should keep the WRX intact and just buy new donor car for the rally Miata