Good video edit. Please shoot more closeups on wrist in the end. Best part is the outcome, you keep always too short. Thanks for videos, it helped me alot starting watch build hobby.
@jbwatchmods2 ай бұрын
Thanks for the feedback, I'll definitely keep that in mind for the next one! Glad I've been able to help
@amedeofazzio47922 ай бұрын
great job. there's always something to learn about watching your videos. Thank you for sharing all these skills!!
@jbwatchmods2 ай бұрын
Glad you're getting something out of them!
@santiagoalvarezdecienfuego25942 күн бұрын
So awesome! any other high end movement you would recommend please?
@jbwatchmodsКүн бұрын
All depends on what you want to build!
@leonardoaraujo24693 күн бұрын
Awesome video, Jason! I'm going to try and give this a go. Quick question, though. I have an ETA movement from an old watch and, checking the specs, it's almost identical to the NH35A. It's slightly bigger, though (27.6mm width Vs 27.4mm from the NH35A and 5.6mm height Vs 5.32mm). Do you think the case is only big enough for the NH35A or is there some room left for my ETA movement? Thanks!
@jbwatchmods3 күн бұрын
Thanks! I think the width would be ok, but you may have some issues with the height and crown stem position. But these are just my guesses, it would be cool to try!
@franciscocabral29172 ай бұрын
bro the pointers was not fixed correctlly, you have to fix the hour pointer in the 12h when the date turns.
@gonzalogetafee63162 күн бұрын
hola, se podria apretar el reloj con la pelota de apriete
@jeffcollins127829 күн бұрын
Hi why don’t you set the seconds hand to 12 like the other two regards jeff Great videos btw
@ceza477829 күн бұрын
If you use your brain, you maybe have the answer
@jbwatchmods28 күн бұрын
Thanks mate. The second hand runs independently of the hour and minute hand and can be stoped/started at any time. It really makes no difference whatsoever where the second is placed.
@LordRobbert2 ай бұрын
Oof the green dial 🤌
@jbwatchmods2 ай бұрын
Yeah that dial is soo good!
@BerdanBingöl-t7f2 ай бұрын
Love it!
@jbwatchmods2 ай бұрын
Cheers!
@BlendedWhiskey2 ай бұрын
Real nice
@jbwatchmods2 ай бұрын
Cheers!
@Ali_Gu9 күн бұрын
Are there thinner cases for this mod?
@jbwatchmods8 күн бұрын
Not that i have seen!
@asadurrohman92062 ай бұрын
Awesome Watches.🥰🥰
@jbwatchmods2 ай бұрын
Thanks!
@MrJASSEM822 ай бұрын
Turned out very nice 👍 you can improve and maybe make a mod watch of RM 😉
@jbwatchmods2 ай бұрын
Thanks! An RM would be a cool build for sure!
@markherriott68432 ай бұрын
Loved the new build! Would you mind linking your new hand press please?
@jbwatchmods2 ай бұрын
Thanks! Yeah sure, here is the link - s.click.aliexpress.com/e/_DDU0yzv
@ycegaming80177 күн бұрын
Is it still a water resistant?
@jbwatchmods6 күн бұрын
Yep! To 100m
@amedeofazzio47922 ай бұрын
Jb sorry I have another question , don't get angry 😅!! Do you use the small soft spacer ring between the dial and movement? In other videos I see it used and I don't understand if it is necessary or not Thank you for your patience
@jbwatchmods2 ай бұрын
It's all good! The spacer goes between the case and movement in this build. It really depends on the case weather it is necessary or not, If the movement is loose in the case you will need to use a spacer, they usually supply a spacer if it is required
@jeremypua60282 ай бұрын
May i know whats the purpose of the screwdriver?
@zmoody89492 ай бұрын
What is the name of that "hand press", I would really like to buy that for easier replace of hands on dial :D Great job, again!
@jbwatchmods2 ай бұрын
Thanks! Here's the link to the hand press - s.click.aliexpress.com/e/_De2wCFz
@zmoody89492 ай бұрын
@@jbwatchmods Thank you! Keep up the good work, really relaxing and enjoying! 🤗
@shivatvabeniwal4 күн бұрын
What movement are you using in your watches?
@shivatvabeniwal4 күн бұрын
Ok, you are using the Seiko NH35.
@jbwatchmods3 күн бұрын
correct
@shivatvabeniwal3 күн бұрын
@@jbwatchmods Well, with this movement, the price is reasonable. A good tribute to the legendary designer, Gerald Genta.
@niels55332 ай бұрын
Whats tips do u use on the pressing machine? I just ordered one because i messed up today with the tools… The Machine includes 9 tips but you use 2 tips? Can u help me out with this? Appreciatie it!
@jbwatchmods2 ай бұрын
I use the clear nylon tips, and just use the red and silver coloured ones for NH35 movements
@niels55332 ай бұрын
@@jbwatchmods What MM do u use for the nylon tips on the pressing machine?
@Rzeyx7462 ай бұрын
hi I have 2 questions can you make a royal oak without the Seiko logo and is it legal to sell watches with the seiko logo when it is not a real dial and therefore a real seiko mod?
@kristiangenge7773Ай бұрын
I’m sure there are many options when buying nautilus dials , especially without the seiko logo. It is legal to sell seiko mods, but you would have to disclose that it is a mod
@benjamindillemann15692 ай бұрын
JB, I have to ask you, have you ever been scammed on Ali? I just checked out your new hand press for ~140€, and you're the only person who's bought it? I don't have the same budget as you, but I feel like that's a pretty big gamble especially on Ali. How do you know when a product will arrive intact and good quality? That said, love that new mod!! I'm getting ready for an nh38A tiffany Nautilus mod currently.
@jbwatchmods2 ай бұрын
I haven't been scammed on Ali as of yet (touch wood) and Ive been making weekly purchases for around 3 years. I have received bad parts before and have always received either replacement parts or refunds. With the hand press, it is a common tool sold on Ali which is most likely the exact same tool that is being sold across the different stores. The store I purchased from is reputable and I have made many purchases from that store in the past which is why I felt comfortable making that purchase. Hope that gives you some insight into using Ali :)
@benjamindillemann15692 ай бұрын
@@jbwatchmods Thanks mate!
@jayjayhooksch12 ай бұрын
Have you had to break any of the loctite seals? Im wondering if I go to replace the movement in 5-10 years if the crown is going to get stuck to the stem because of the loctite. Or does that not matter because crowns are universally threaded? As in, it's easy to source new crowns in any case.
@jbwatchmods2 ай бұрын
It's only a medium strength loctite so it's really easy to remove. If I've had to break the seals after a few years I've never had any dramas!
@jayjayhooksch12 ай бұрын
@@jbwatchmods thanks. I was just now doing some reading on crown/stem assembly and loctite. I found some info regarding not needing loctite if the crown is screwed in properly. Apparently they often are not due to one or two reasons: First is that holding the stem by hand or by pliers doesn't provide enough resistance to connect the stem to the crown properly. The recommended solution is a pin vise. Apparently pliers or side cutters don't work because you would be holding the stem gingerly as to not damage it. The second is that if the snipped end of the stem is not filed in a conical fashion (as opposed to flat across) it can cause problems that result in the crown not staying in place. Apparently it just needs a light filing in the appropriate shape. I'm going to give these recommendations a try before something like loctite. My parts should be arriving sometime this week, I'll try to remember to give you an update as to whether or not my stem feels secure without the loctite using the above methods.
@justyourlocalAussie2 күн бұрын
@@jayjayhooksch1dude, use the loctite, you WILL be sorry if you don't! If you need to remove it in 20 years time, just heat it up with a cigarette lighter and the loctite will melt.
@daniels.r.51972 ай бұрын
Hello, do you ship to brazil?
@jbwatchmods2 ай бұрын
Sure do :)
@p.96082 ай бұрын
What is a Fake and what is a Homage...?
@jbwatchmods2 ай бұрын
I would say a fake is trying to pass it off as the real thing ie. putting a patek philippe logo on the dial. A homage may look the same, but doesn't claim to be the real thing
@Ageratos012 ай бұрын
Such a nice build. I'm 80% at the point of doing my own build. The hands freak me out, when you set them is there any indication that you know it's been pressed in enough? Or some sort of feedback to know don't smash it into the movement 😂. Your guides are 👌
@jbwatchmods2 ай бұрын
Thanks mate! The top of the hand will sit flush with the post on the movement, using the right size tip on your hand press ensures you don't push the hand down too far. Once you give it a shot you'll work it out!
@Ageratos012 ай бұрын
@@jbwatchmodsAmazing thanks for that, only one way to find out 😅. Appreciated.
@skitini12 ай бұрын
ngl your channel has potential. refine it a bit more, get rid of the epic superhero music, make it more subtle, get rid of the background music and be more confident in your commentary, its great. your visuals are great already
@jbwatchmods2 ай бұрын
Appreciate the feedback! Im only 2 months in at this stage so I'm still trying to find my style, just got to dial it in
@skitini12 ай бұрын
@@jbwatchmods very impressive for 2 months, just some refinement and you have everything for a top channel
@jbwatchmods2 ай бұрын
Cheers🙏
@kallarisfault6708Ай бұрын
2 thick, kills the whole look.
@jbwatchmodsАй бұрын
You could bring the thickness down by doing a solid case back, but it won't get too much thinner for an automatic watch at this price point
@kallarisfault6708Ай бұрын
@@jbwatchmods I would do a quarz version in 8,5mm
@jbwatchmodsАй бұрын
@@kallarisfault6708 If you can find these parts for a quartz watch let me know!
@YanzBra3 күн бұрын
Homage xD. Call it what it is.... it's an Ali Express fake watch DIY pack. I get that it's fun assembling it for bragging rights and content but it's still supporting and glorifying the Chinese fake watch industry.
@aschecontent2 ай бұрын
Please Build me One i dont have Money
@jbwatchmods2 ай бұрын
I may do a give away in the future so keep an eye out!