Building a TINY HOUSEBOAT (It's Finally Done!!!) vs.

Thanks to EcoFlow. Get an extra 5% off coupon code UBJOPOKQ on all EcoFlow Black Friday products both on Website and Amazon:
EcoFlow Amazon Black Friday US: amzn.to/3WsSfUJ
EcoFlow Website Black Friday US: us.ecoflow.com...
Duration November 11- 28th, 2022.
If you are in the market for any of these products, EcoFlow is running the biggest promo of the year for Black Friday as we speak, some up to 50% off.
Building a Houseboat:
Part 1: • I Built a Micro (40 sq...
Part 2: • Building a TINY HOUSEB...
I challenge Zach ‪@FowlersMakeryandMischief‬ to build the word's smallest micro house boat that has all the amenities including cooking, sleeping, sitting, and so much more. Join me on this adventure while I work to building the most epic house boat, or pontoon boat that is fully equipped for overnight.
Zach Fowler Tiny Houseboat Part 1: • Solar Tiny Houseboat B...
Zach Fowler Tiny Houseboat Part 2: • Solar Tiny Houseboat B...
I got this tiny boat for free and and challenged myself to build a house boat that was beautiful, functional, and cheap enough to build. With the help of a bit of new material, and a lot of reused scavenged material, I will turn it into a luxurious solo micro house boat.
My Brother The Wooded Beardsman's Channel: / billert55
SOCIAL MEDIA
Instagram: / wood_chucker_987
Facebook: / modernselfreliancechannel
SPONSORS
- Ecoflow: us.ecoflow.com...
- Wood stove cubicminiwoods...
- MMM-Grill (use code MSR10 for a 10% discount): www.shop.mmm-u...
- Princess Auto: www.princessau...
- Cabela's and Bass Pro Shops: www.cabelas.co...
- Norwood Portable Sawmill: www.norwoodsaw...
- Eastonmade Wood Splitter: www.eastonmadew...
- Vicwest (Roof): vicwest.com/
- Flooring: bigelowfloorin...
- Hunting boots link: bit.ly/3uf8kkH. 20% off coupon code: hunter20
"Self-Reliance" is an 1841 essay written by American transcendentalist philosopher and essayist Ralph Waldo Emerson. It contains the most thorough statement of one of Emerson's recurrent themes: the need for each individual to avoid conformity and false consistency, and follow his own instincts and ideas. This channel will approach self reliance from a modern perspective. and will focus on various build projects using modern amenities, and tools to build a completely self reliant lifestyle.
#EcoFlow #SolarGenerator #PowerStation #BlackFriday2022 #SolarPanels

[@ModernSelfReliance]

*Thanks to EcoFlow. Get an extra 5% off coupon code UBJOPOKQ on all EcoFlow Black Friday products both on Website and Amazon:* EcoFlow Amazon Black Friday US: amzn.to/3WsSfUJ EcoFlow Website Black Friday US: us.ecoflow.com/?aff=167 Duration November 11- 28th, 2022. If you are in the market for any of these products, EcoFlow is running the biggest promo of the year for Black Friday as we speak, some up to 50% off.

[@labratmanny1251]

Use heat for removing the protection layer pexiglass

[@3amForge]

Some of the best stuff I've ever found is 3m adhesive remover. The stuff is incredible for removing old stickers on lexan and plexiglass. It's cheap also

[@juliebaker6969]

Try using packing tape or duct tape to remove the protective film. Tape it over the film and rub it down good to get it to really adhere, then pull off the tape, and the film SHOULD come off WITH it. I use this method to remove adhesive from stickers when the paper peals off, but the adhesive stays on. It MAY take a little playing with it to find a tape that has a stronger adhesive than the film does, but it CAN'T be any worse than pealing it off a fingernail sized piece at a time

[@vapingmatty4209]

Use wd40

[@juliebaker6969]

@@vapingmatty4209 WD40 is a penetrating oil which will actually melt some plastics. This MAY be a type of plastic that WD40 is safe to use on, but since OTHER petroleum based solvents have reacted with it, it MAY not be wise to take that chance. Though it wouldn't HURT to test it on a piece of scrap and see how it does.

[@kindakylie4735]

For me, the ideas in kzbin.infoUgkxAfqpMLyFn37qcqUl0FAzqkkycQeXqrhP Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.

[@cogboy302]

The tarp should shrink a bit once the sun gets at it. As has been said, it's not very UV stable, but you can paint it with rubberised roof coating which will reseal it. That's how I've done the roof on my garden shed.

[@williameldridge9382]

It depends on the type of tarp. Some of those plastics are highly UV resistant, hard to say just by seeing it though.

[@wrenchdoozer]

I like the barrel latches to stop the doors from swinging in the wind. Nice touch.

[@anthonystickel3463]

Your boat is looking great! And inspiring me to add that to my many projects to build. Something you may want to try is using a propane torch to take out the fine scratches from the thinner and goo gone on the plexiglass material. Also try using a power washer to get rid of the protective film

[@williamsimmons8927]

your finishing and ideas are pure genius, well that is as long as it floats, enjoy the many challenges that you share with us, good stuff.

[@northstarprepsteader]

Try a hot hair blow dryer to peel the paper off. It will melt the glue. Also, I had an auto repair shop polish my headlights because they were so cloudy. Worked beautifully! Maybe something you could try on the damaged areas?

[@SaffyFoo]

I’d like to see more challenges with other DIY channels. Love seeing things being made out of products that have been collected over the years 🙏🙏🙏🙏😂👍🐾

[@teaddict-]

I think it might still be wise to add some ballast to the bottom center of the hull to give it stability. Stacking all the heavy bits to one side will make it list heavily in the water without you in it, and might limit where in the boat you can sit while moving it with the motor. The proposed outriggers aren't the best shape for the job either, they will create an awful lot of drag even partially in the water, and with no ballast those are your only source of roll stability. Very interesting project, but there's a bit of engineering left to do to make it the best tiny houseboat it can be! 😁👍

[@virginiarocks]

Water Strider. What a great name for a watercraft! 😎

[@fatzmalone5705]

I love these little competitions between you and fowler... Both are amazing channels!!

[@bobbiechavez2990]

You and Cousin Fowler, yep, fruitful competitions. Good times!

[@visnuexe]

Me too! Two geniuses let loose on the same project with a stiff need to win! You both make it look so easy, but a heck of a lot of creative ingenuity makes for astonishingly appealing results!

[@russellwatters5891]

This is going to be a great challenge...lol A wood stove, outriggers, a foul weather canopy? Yep, gotta love it! Love what you're doing ❤️

[@jamaldaniels7402]

Love when the update come on a Saturday....that means you and don put in work the whole week

[@lpschick7237]

Looking good Kevin!!! Always great to have help. Can’t wait for the final video & to see the finished product.

[@sarahloy830]

It is looking great. The buffer kits for polishing car headlights might work on your Lexan to remove the damage and the stuck plastic.

[@arrye7790]

I did the exact same thing with the goof off on the job, where we had similar hard plastic containers and had to take the labels off. Next time, I'd recommend getting a light scraper and doing it that way, then use goo gone for the remaining sticky stuff

[@shimasfaris2917]

tip: I strongly discourage using a tarp . they are waterproof when they are loosely over something but unless maybe it’s a heavy duty one , when pressed against a solid surface water tends to seep through the fibres and will cause mold I’ve tried this for a small project to replace roof felt although I ended up buying roof felt in the end 😅

[@StormyWeather93]

I was thinking the same but with an issue like that I'd think that a coat of polyurethane or exterior paint would mitigate that issue. That being said though it's just a temp challenge so long term shouldn't be a problem. Was also thinking that if it was me I'd have sprayed the plywood with spray glue to sit the tarp down clean and that'd make it a little more water proof too. Those wrinkles make weak points. Either way though it's a cool project

[@recoveringsoul755]

Boaters use tarps but they disintegrate over time with outdoor exposure

[@WarthogChief]

May need to lightly sand with (3000-15000 grit on lexan) then use a plastic polish on an orbital to bring back the perfectly clear windscreen.

[@langdonplaster491]

Try using a random orbital buffer and some Headlight restorer. It is available in most auto parts outlets. And it is made for modern plastic headlight lenses.

[@JakeRichards]

That's a really good idea!

[@staceyvegamarkum4071]

Looks like a beautiful little boat! Reminds me of the steamboat willie tug boat with mickey mouse.

[@Toms_Bright_Ideas]

I suggested you go with a tri-hull to have more of a stable platform to work with. Though outriggers are good too. Make sure you have plenty of flotation devices with you and I also suggest for any boater a personal locator beacon to help Search and Rescue to find you. The tall and narrow boat body profile creates a difficult moment of inertia to keep stable even on calm waters. So you might need more ballast near the center of gravity and the outriggers definitely will help, especially if they are slightly heavy too. You'll have to be aware of where in the boat you are at much like a small plane the pilot is careful to place certain weights in relationship to the center of gravity and the center of lift (quarter chord of the wing). Good luck in the competition. I doubt your friend can make a decent House Ball.

[@MrHunterseeker]

30:00 heat. Use a hair dryer to heat up the stickers on glass and plastic fiberglass, to warm up the glue, then peel it off, can use a razor blade to peel it.

[@larryhutchinson4271]

My thoughts exactly, of course my first thought was Goof Off, but Kev showed us how well that idea worked.. I would also try the hair dryer and razor blades on the screwed up one first, never know..

[@paulsavage33]

really nice design and creative looking forward to the next episode

[@glg3945]

Great build! It is looking amazing. Goo Gone and soap and water would probably take off that film. This is just a hoot! Great video. Peace and good fortune and good health to you and your family and friends. 😃

[@kingrafa3938]

This is really fun and exciting friendly competition with Zach. I can't wait for you to try it in the big water Kev. Looking forward to it.

[@chickenwriter]

The maker of the plastic sheet, make a solution to help peel the protective layer off. I don't remember what its called. It's been a few decades since I used it. I think I picked it up at the same place that I bought the plastic.

[@charlesab]

I have already watched Zach's build and after watching your build, I'm giving you the Trophy.

[@davidstout1095]

While it is not a completely cheap option, I would suggest using a TPO or PVC plastic RV roofing sheet for your roof. Tarpaulins will break down quickly in the sun and winds.

[@SethCarignan]

Both Your channel and Zach's have inspired me to get back outside and get creative with what I have.

[@JakeRichards]

i feel that too!

[@janhugo]

Try to use that polishing stuff they are using on car frontlights/headlights made of plastic, maybe you can save that window.

[@artursmihelsons415]

Great job and excellent video, as always! That plastic protector is welded by sun and there isn't a chance to remove it without damaging material. Same thing happened with family friend who build its house and leave plastic cover on new plastic frame windows 2 years in sun and decide finally remove it after facade was done - all ended up with changing windows because they can't peel it off..

[@ModernSelfReliance]

I have a feeling this happened.

[@alyssafreeman6006]

Looks like its time to sand the window down and use headlight restoration on it. It will clear it all up nicely once you cut all the nasty down. It looks great. Can't wait to see the function test!

[@hillbillywisdom777]

I hope you're going to make a dry dock for the boat to live in the village so it can be used as a cabin anytime. And it can have a permanent place in the Unnamed village of Sir Don and Sir Kevin

[@ModernSelfReliance]

That's not a bad idea.. perhaps by the pond.. just slide it in when you want to Bob-around.

[@hillbillywisdom777]

@@ModernSelfReliance great idea !!!

[@rubyqpublic]

FYI - plastic razor blades work well for scrapping off the coating you are struggling with.

[@kellieglass1722]

If you haven’t decided on a NAME for your boat, I suggest STRIDER (as in the hero of The Lord of the Rings). You gave me the idea when you were talking about water strider bugs and boat riggers.

[@brendag2891]

Kellie, I like that boat name!

[@cynthiat6505]

Excellent!

[@Boomhauer69]

Definitely looks nice. The only thing I would done differently is I would of added on the other wall another camper window instead just for matching purposes. Then went with a small rv door like see on teardrop camper just for insulation keeping the heat in a little bit better. I definitely do like how it turning out looks nice. Got me kinda wanting to try build one but I have know building experience and plus here in Michigan it's to cold and have to wait til spring. Definitely like the video. Definitely gained a new subscriber. I'm myself is working on building a KZbin channel as well.

[@ModernSelfReliance]

You'll have to send me a photo of it when you get around to it.

[@Boomhauer69]

@@ModernSelfReliance if ever did make one I probably post a video to my KZbin channel. Cause I plan on when get funding to do so try and do some build challenge on my KZbin. Like sometime I plan on doing a tiny house build. Made quite few videos on my channel talking about what kinda videos nolan on doing.

[@FATHERSOFBASS]

Build small wings with floaties on the ends for extra balancing and tip over prevention

[@dieselrugg]

Don had the correct pronunciation.

[@shawnrinkel8377]

You can put tape on the old plastic covering to pull it off of the plexiglass

[@johnlmoring]

WD-40 works great for removing adhesive labels,price tags. I spray it on,let soak for a bit and lightly scrape it off. it might take a couple of applications and it won't harm the plastic.

[@toddrouch7526]

It also might be helpful if the lexan were brought up to an overall warmer temperature. Just a thought.

[@AwakeLazarus]

Some overhead cargo netting as storage for your bedding and odds and ends, maybe?

[@pattitatman6146]

Googone will remove the covering for your window

[@SoulfulSmokie]

What about keeping some "Goo be gone" around it helps remove adhesive materials like labels and so forth. Thanks for the Vid.

[@65wldstln]

Much safer than Goof Off for sure, People mix them up all the time.

[@dyannejohnson6184]

You are honing your skills ;with your spider;…..adding BIOMIMETICS. YOU HAVE ENTERED THE WORLD OF COPYING NATURE! amazing honor

[@herrskeletal3994]

Test pieces are always advised when trying chemicals in new and wonderful ways.

[@philipvanderhoofven9848]

great for solo. I recommend rethinking design criteria for two people -

[@Gillespie91]

Not sure if any one has told you yet or not but take a handheld propane torch and lightly go over the spot on your window that is foggy and that might bring back your clarity through it. I've see people do it before but not because of the reasons you had happen. So it may work

[@jmcova23]

Coming out amazing 🤙🏼.....man I love your videos 🤟🏼

[@donnie2533]

Glad you posted keep them coming thanks

[@jessebuckley6867]

SUCH a fun video. Dude your creativity is incredible and we’re so thankful you’re sharing it with us through KZbin. After a long days work this is exactly what I needed. Longtime subscriber! Since day 1. Also I thought it was hilarious you have all these intelligent and intricate ideas to fix the window and Big Brother Chris just says “burn it all with gasoline” 😂 Keep up the good work brother!

[@JakeRichards]

I agree!

[@michaelalexander844]

Use a heat gun to soften up lexan film to peel off with more ease. And to fix the chemical burns try 3000 grit sandpaper and polish and low heat from heat gun to smooth it and add some shine and a polished glass appearance.

[@PACOSBBQ]

Hey, Dont forget that you will need lighting outside too. Like your red/green port / starboard stern light, anchor light and you might want a light in your lil galley. But if your only going in your pond, my ideas are a moot subject. But why not one of those china weedeater motor air cooled trolling motors. ive been building boats since i was 17 im now 66.. Nice job. cute lil boat. Hurry want to see your 1st overnighter.

[@waynefisher4327]

Lookin' good! Sounds obvious but boats have a tendency to be wet. I couldn't help think about the gunwale sides of your vessel. Great to have the lexan in front. Even have all the edges double seamed. But I bet even in back she's going to sit pretty low. It adds to the weight but you could make some type of lightweight gunwalel extensions for the stern and sides. Just to keep water from splashing in. Last thought, I know you're going lightweight. Even some thin white pine strips to make a structure to lift the mattress off the deck. That might keep your bed clothes dryer. She's looking quite tidy :) Bests~

[@kylejones2075]

If the tarp doesn't work on the roof get some of that real thin sticky roofing that should work but put something slick underneath it to like when you're doing a window so that you get all the bubbles and wrinkles out of it just a thought love the videos

[@jasonplant5432]

I just watched the first video. Then BAM !! 30 minutes later it's concluded.

[@ModernSelfReliance]

Isn't it great when that happens.

[@bwcok7947]

Hydrodynamic stabilizers. PVC pipe works great for these. Seal and float!

[@jessicad83]

Hot soapy water !!! That's all you needed..

[@ianhollands8389]

Houseboat name suggestion: Ramble on ?

[@HulkDad5083]

hahaha I love it !!!!!!!! (Outdoors) Craftsman V.S. (Thinking ahead/ Construction) Craftsman !!!!!!

[@j.r.millstone]

For the stuck plexi wrap, use a heat gun and a plastic razor blade.

[@aarond4821]

You could always try a power washer to that plastic or a heat gun might work too. It's looking pretty good.

[@Megan-Yoder]

I thought about using a heat gun also.

[@JakeRichards]

Was thinking the same thing

[@selfretired3025]

LOL love this... drawing from nature... water striders defy reason

[@timmytidewater89]

Name your boat 'Water Strider'.

[@devoregroup]

Looking forward to part 3

[@RockTurnerSr]

I might have tried a clear plastic window seal that you could use heat gun to shrink to tighten.

[@bmike3000]

for the record, a catamaran only has you hulls or pontoons in the water. if it has three it is actually a trimaran

[@malikto1]

Try wet sanding the lexan with 2000+ grit. It may polish out.

[@mikerogers9711]

put some bricks in the gunnel keep the center of gravity LOW. oh and Zach got his ars kicked on this build. great job

[@xTechDecayx]

been there done that with the old lexan. Make a scraper out of the same material. Very minimal scratching if you keep the scraper clean.

[@xTechDecayx]

By scraper I mean a nice square piece, with a sharp 90° edge. And at that I round over the corners. Coming from scraping 2 full sheets of 15+ year old lexan I got at an estate sale for pennies over the course of many smaller projects.

[@jamesellsworth9673]

Would this build benefit from a bit of ballast to balance the top weight?

[@wrenchdoozer]

One thing that has worked with me to get stubborn labels off is Goo Gone. Very oily and sometimes it takes a few applications before the label and residue slide off.

[@Trying_very]

There were some great comments last time about attaching some outlying floats to help balance the boat. I was wondering if you could build some outriggers that could fold up when you take it out of the water?

[@Paces2]

This is sick! I have been looking for something like this.

[@gacattack1234]

Maybe a little heat will soften the adhesive. Not enough to melt plastic coating.

[@paigebatehup1469]

to clean the plastic off the large window on the bow of the boat, i would have tried using washing up liquid or oil

[@processfitness]

Use Goo-be-gone or peanut butter or cooking oil to get the label off.

[@allenenabnit7078]

Heat gun on that plastic coating warm the backing glue should allow you to peel it off easily with a gentle pull

[@allenenabnit7078]

Also you can mold Lexon by heating it till is soft then hold in a mold till cool and it will stay that shape just don’t get to hot or it will turn white from air bubbles in it.

[@allenenabnit7078]

You can make some more domed round windows for future projects

[@stevenfaber3896]

Spray bottle of IPA, the good stuff, not witch hazel. Left a lot of lexan out. It does haze it a bit like lacquer thinner, but not near as much as that or the snow from goof off.

[@arm279145]

You might try a plastic razor blade for the lexan. We used to use them at car dealerships to take stickers off of cars.

[@scottsoriero9827]

You can use a quality clear coat compound with a good orbital buffer to get that Lexan clear again. It will take a bit of time and patience, but it will be worth the effort. also, I am a boat guy for 45 years. why not find a flat bottom boat that is all aluminum. Very light weight and much, much more stable than that v-bottom. A Grumman 1437 for about $350 or less.

[@awestacular]

Take a buffer to that window. You can make it work.

[@ChirpyMike]

I wanna see someone build Dwight's horseboat.

[@schwabrichard9829]

Try Denatured alcohol on your Lexan panel. Nothing cleans like Denatured alcohol.

[@lisaetter2941]

Did you ever consider BALLASTS? Check out ship building and modify to scale. Outriggers on a stubby shape is a no no. The strider is thin and oblong not stubby and unbalanced.

[@davecurda2350]

Never question the Don!!!!!!!

[@halinawiecek2297]

Excellent job, you are amazing men all the best and take care.

[@julesa.5887]

"Water Strider" would be a good name for it.

[@willscott85]

I know that with acrylic aquariums you can remove scratches and blemishes with a tickle from a torch. Maybe that works with lexan as well?

[@jccoffey23]

Absolutely beautiful work

[@taylormcintyre5759]

Your battery bank could work as some ballast if you put it in the bottom

[@larryhutchinson4271]

Port Hole?? on the right side of the boat would that not actually be a "Starboard Hole Window".. lol

[@jeremywoods9807]

Use a heat gun or hair dryer on the stuck plastic. It'll heat up the dried-out glue

[@Lowshoehighhat]

What you do is take a heat gun to remove the paper. If you heat enough it will bubbel and look really cool that way you can make it nice and (save it) . Try that.

[@clintonscott9623]

Interesting info lexan is a plastic "more resilient than most others to cracking and bending but you still have a problem with chemicals, because it is still a plastic.. however you can polish out many of your issues.." ...

[@joancoleman1228]

You need a keel to stabilize the cork!

[@oldinuselesshancox5194]

Nice we've found a bit of water in ya barrel helps

[@darrellasmith77]

Rubbing alcohol should remove any of that adhesive off the window without damaging the lexan

[@ChronicBronchitis-mz2vn]

Not the Goof Off, nooooooooooo!

[@russellweber3466]

Jim Desclos, thebossoftheswamp uses the bubble foil insulation in many of his projects.

[@jimgriffiths9071]

I would run a hair dryer over the film. Maybe that would work.