Building My Dream 3rd Gen 5.9 Cummins Diesel In Two Years | Build Walk Through

[@JustDiesels]

3rd Gen Build Parts List: Video Playlist of Every Stage of the Build: kzbin.info/aero/PLzY9imchLseXVvbhInWdY3qAhXHkqE-Ws SUSPENSION: 3” Carli Dominator suspension system with torsion sway bar, full rear leaf pack, and high clearance control arms: www.cjcoffroad.com/collections/94-02-carli-systems/products/carli-dodge-3-1994-2002-dominator-3-0-suspension-system ___________________________________________ Wrap: American Wrap Co: americanwrapco.com ___________________________________________ STEERING: CJC Off Road Front End Upgrade Kit: www.cjcoffroad.com/collections/complete-front-end-upgrade-kits/products/ultimate-3rd-gen-steering-package Carli Ball Joints EMF Bushing Mopar HD Steering with Carli Dual Opposing Stabilizers Carli Track Bar Mopar Big Box Dynatrac Spin Free Hubs: www.cjcoffroad.com/collections/free-spin-hub-kits/products/dynatrac-free-spin-kit-2000-2008-dodge-2500-and-3500-with-dynaloc-hubs ___________________________________________ WHEELS: Trail Ready TR 20 Wheels: www.cjcoffroad.com/collections/cjc-exclusive-wheels/products/cjc-edition-ram-trail-ready-20-x-9-5-simulated-beadlock-wheel Tires: 37/13.5/20 Nitto Ridge Grappler/ Recon Grappler ___________________________________________ ENGINE: Fass 100GPH Lift Pump: fassride.com/ Tuning ( Custom EFI live from NRE Performance) www.nreperformance.com Longhorn Fab CSP5 Switch Mount: longhornfabshop.com/cigarette-lighter-dsp5-csp5-switch-mount-01-07-duramax-07-5-09-cummins-200960/ 5” Turbo Back Jamo Exhaust: www.nreperformance.com S&B Intake: www.cjcoffroad.com/collections/dodge-cummins-cold-air-intakes/products/s-b-cold-air-intake-for-2007-2009-dodge-ram-cummins-6-7l-dry-extendable-filter ARP 625 Head Studs: www.nreperformance.com Valair Dual Disc Organic (Quiet) Clutch: www.valairinc.com Hamilton 103lb Valve Springs: www.nreperformance.com Hamilton HAM07-P-004 Push Rods Edge Insight gauge system: www.cjcoffroad.com/products/edge-insight-cts-3?_pos=1&_sid=1cba752f7&_ss=r SRT10 Pillar: www.genosgarage.com/product/gm-dg-zl39tl2-aa/gauge-mounts1 ___________________________________________ LIGHTING: Baja Designs 30” OnX6 Light bar and CJC brackets: www.cjcoffroad.com/collections/ram-lighting-kits/products/cjc-off-road-dodge-30-arc-onx6-light-bar-brackets-30-baja-designs-onx6-arc-combo Baja Designs Squadron Pro fog lights/ CJC brackets: www.cjcoffroad.com/collections/ram-lighting-kits/products/cjc-off-road-2003-2009-dodge-ram-fog-light-led-brackets Alpha Rex Nova Headlights: www.cjcoffroad.com/collections/06-08-ram-headlights/products/alpha-rex-06-08-dodge-ram-nova-series-led-projector-headlights-alpha-black Custom Build Gorecon Tail Lights: retroshop.us/ ___________________________________________ Amp Research Power Steps: www.cjcoffroad.com/collections/dodge-12/products/amp-research-powerstep-running-boards 2016+ Sport Cummins Badges ___________________________________________ INTERIOR: Uniden R7 Radar Detector: uniden.com/products/r7

[@jmo2640]

Sickest 3rd gen on the planet hands down IMO!

[@FreeRange4x4]

So glad I subscribed the other day. I get to watch this 5 minutes after upload. Edit: Finally finished the video. SOUND CLIP???! Maybe next time...but it's not my truck :P

[@ApolloTheDerg]

I have to say, you have the best looking third gen I’ve seen. Whenever I’m talking third gens, I always pull up yours, and not to mention beyond looks, you have this thing built right. Keep it goin, love to see it!

[@JustDiesels]

Thank you! The goal with these videos and stuff is always to inspire other people to go do cool stuff, so comments like this make the work worth it!

[@dylanbrown6401]

This truck is so beautiful man! I have been going back to your videos for inspiration over and over again. I even swapped my front end from the early 3rd to late 3rd because I love this truck so much. My truck was my grandpas who unfortunately passed away when I was 11 years old in 2012, and it was handed down to me from my dad and I told my dad I would make it better than new. It’s very hard with how much has gone wrong and how much money it has cost me and my dad, but I’m trying to keep my chin up and get it well built and fully functional just like yours!

[@johnmichaels4330]

These trucks are ridiculously expensive to build out. Could do f250 for so much less, but you'll have what you want and it'll be a part of your family's history.

[@dhones23]

That’s the nicest, most well thought out 3rd gen I’ve ever seen. Congratulations and well done!

[@fernandovaca7970]

If possible can we get a video of all the things you have done to it and what it cost you? How did it cost for just the parts and how much do the labor cost?

[@theglitch99]

Great truck, like the badge removal (a must) Cummins badge only looks good!

[@djntqd]

Love the channel, love your work. I really admire your passion for your dream truck. It is a beauty. I also loved it in stock form. Cleanest 3rd gen I've ever seen. Im more of a stock look guy. But your transformation is amazing too. Long live the manuals. I bought my dream truck 2 years ago. A '99 7.3 Super Duty 4x4 with a ZF6 rust free.

[@JustDiesels]

Thank you! My big thing with this truck (and all of them really) is reversible mods, so I can always go back to stock! To me that’s important for keeping the truck timeless.

[@Rangerdnger]

I did the same exact thing built my dream third GEN, and said I would never sell it then you get married and have kids, next thing you know, you're building a dream mega cab 4th or 5th gen. The quad cab does not cut it with more than one car seat. still have the third GEN but literally never use it for anything. It just sits probably gonna sell it lol

[@JustDiesels]

I’ll keep this and just get a newer truck. This is one I want to hang on to forever!

[@jvorheis]

@rangerdnger You sell your truck yet?

[@eagle1hd]

Yes do tell....did the truck sell?

[@sohovs]

I got a mini Van instead of selling my truck 😎

[@vee6411]

Why do you have to have a 4th or 5th gen? Didn’t 3rd gens have a megacab?

[@Balakay9435]

Hell Yeah Brother 🇺🇸🦅

[@jefftbow4297]

It's incredible how you put your imagination out into the truck itself. It's a very nice truck. You did excellent.

[@bradvicam]

I just installed the Apex steering on my 06 crew cab long bed, the support from the folks at Apex is the best!

[@kylejonesUB]

That's a beautiful truck. I'm envious of your rust-free 3rd gen! My '09 is in old-man-Gold (Champagne) and I'm dying to get a new bed for it.

[@hudsonburton7941]

Please make a POV drive in this BEAST!!!

[@JustDiesels]

Will do!

[@waywardexperience537]

Just picked up an 06 g56. Thanks for the ideas! I can't wait to catch up with you.

[@eagle1hd]

Do you have a list for non power adders? What if I just want the most reliable, durable, long lasting truck but couldn't care less about adding power? It seems as though steering and fuel are the upgrades for that, but are there any more? I'm looking to buy a bone stock 3rd gen 03-05 and just want to drive around the states with my enclosed trailer with a few motorcycles in it. Edit: if power is added due to a needed upgrade that's fine but that's not the goal.

[@bigbucksbigtrucks1722]

Your living my dream, keep up the great work, can’t wait to see the most premium well put interior video that I know you will deliver!

[@f5tornadeau]

Your dream truck is my dream truck. Perfect build. It’s soooo nice!!!

[@leemckee1272]

Gen 4 leather with the 3 cup holder console would be nice to see. I have heard that the shifter needs to be bent slightly to avoid interference.

[@brownfab2700]

Very nice and you will like the HP bump when you go to the next step. My 06 is auto trans with Fass fuel pump and EFI but with water meth injection 60 over S & S injectors and a Fleece Cheetah

[@N0M4D_22]

Just bought an 06 mega cab 5.9 hoping to build it to be half as decent as yours it was an old work truck so needs lotta love 132k miles

[@808Cummins]

Love it man. Just inherited my dad's 3rd gen 6.7 but am going through major DW issues. Followed your process on working it out and 2500k later i am praying it's gone or minimized. Gonna do the lift next and see where it goes from there. Might be moving to Vegas and shipping either the the 4th or 3rd gen up for my daily. The 4th is better in all aspects but the nostalgia of the 3rd is hitting me more lol.

[@johnmichaels4330]

Damn man you put more into upgrades then you did in buying the truck.

[@The_MM_Life]

Curious where you are insuring the truck, how are you covered if the truck is totaled? Love the channel, Thanks!

[@JustDiesels]

Good question. I have allstate, but as far as I understand, modifications to this extent are a bit difficult to insure for unless you do declared value rather than traditional insurance. Long story short, I have a feeling my coverage isn’t adequate haha.

[@focojeepr]

I was wondering the same. A truck this nice needs stated value otherwise insurance will screw you so hard.

[@JoshAllenberg]

Man I wish I lived in the desert. Lower prices, lots of space, and I might get almost the exact same truck as you. Maybe a 3500, and more towing oriented suspension, but very similar aesthetic

[@nettles89]

Yeah, rub it in that I’ve had my ‘07 3500 for three years and made minimal progress 😂. At least this keeps me dreaming and planning. Gorgeous truck, keep ‘em coming!

[@jakewalters7925]

Would love to know more about the process, before and after, and your thoughts on the Xpel protection film!

[@3guysgarage]

Your channel is absolutely goals man. I love your builds they are always top notch

[@pcuser6257]

What’s the update I’ve been building mine and love watching yours

[@JustDiesels]

I’m just enjoying the truck! All I’ve added since this is an axle truss.

[@bulldogpanzer]

Nice build! Quick question: why the S&B intake vs the other options (Banks, etc)? Been trying to find comparisons without much luck.

[@The_MM_Life]

Could you do a video on how you wired up your switch pro, especially how you mounted everything under the hood. Also would you have a link for it? Thanks

[@JustDiesels]

I helped develop a whole 3d printed cab mount and engine bay mount at CJC. It’s pretty slick! Here’s a link: www.cjcoffroad.com/collections/switches-and-switch-panels/products/06-09-3rd-gen-ram-switch-pros-dash-mount

[@The_MM_Life]

@@JustDiesels Do you make the engine bay mount and cab mount for an 03? That is a sweet setup.

[@JustDiesels]

CJC and I got it designed and built! Figured these older trucks deserve some nice parts too.

[@AR-ts2qr]

@@JustDieselsthe 08 Laramies have an adjustable foot pedal control switch there. Guess we can’t mount that 3D switch pro there. 😂

[@JustDiesels]

Us SLT peasants just have a blank spot!

[@triggerhappy2408]

Beautiful build! What kind of fuel mileage do you see? I get up to 21 mpg with a 2016 4wd 6.7 cummins. It's deleted and tuned.

[@ericl5973]

I would like to know also. The best I have ever gotten is 19mpg on my 2006 5.9, 37in tires, 3.73 gears, G56. I only average 12 in the city now.

[@quentonmillstid850]

​@@ericl5973poor environment

[@AR-ts2qr]

I get 21 w my 08 6.7 4x4 as well.

[@Texasbroski512]

Besides headlight style if I win the loud n proud copying this build

[@kylehutchins3519]

Gorgeous truck.

[@EYVOAuto]

Love the content and love the truck! You struck gold with this one for sure!

[@romeored3889]

Finally a real truck on KZbin and not some ugly toy like all the others.

[@nameshavebeenchangedtoprot2127]

Man, it is a beauty, I don't know what kind of job you have to drop the amount of coin you do, but man, you do a heckuva job on these trucks. I see several things I would like to do to my 06 2500, that you have done, but likely they will be a locker in the rear, 35's and a mild tune. When it's time to rebuild, then we can talk head studs and maybe a turbo. I think the suspension is probably needed, as it does ride like a tank.

[@AllenGeibel]

Are those 4th Gen ram mirrors without the running lights?

[@kaiserbailey]

Which steering dampener will you run with the apex steering? How does the Apex setup compare with the updated mopar and synergy?

[@JustDiesels]

I’ve worked to develop a high mount and low mount clamp with CJC, so these stabilizers can be used with the Apex linkage! Apex is going to be beefier tubing, beefier, replaceable joints, and an overall stronger setup. They also offer a lifetime warranty on the joints and linkage, which Synergy doesn’t.

[@nsacco208]

I haven't touched suspension yet, did a normal double din radio, did clutch and bypass, tunes etc.... I have almost the exact Truck. Mine is blue and is a 3500. I haven't touched the suspension yet because A. I don't want to get worse mileage and B. I tow a good amount with it! (min is a 3500 aswell) . I more of a long bed guy, but the shorbed is convinient to daily if I want. Mine was also a Montana truck, 1 owner grandpa truck (found hearing aide battery's aswell 🤣) my truck had 150k so not too bad. I'm almost up to 190k already. Anyways, great job! I may have to check those tunes out so mine Smokes a touch less, and i may start slow, I kinda like the idea of Thurren Xtra soft front coils to level and get some leafs with airbags. That will give me like 2 inches lift. I'm also curious of a ballpark how much the wrapping cost, looks sweet!

[@Texasbroski512]

If I win the lottery definitely building a clone but with a built automatic tho. no slack to a stick shift been a trucker for years driving stick hips and ankle worn down prefer automatic for nice drives. Beautiful truck

[@nickanest]

How do you pass California smog check with straight pipe?

[@alextimer8055]

Hey how do you like the banks intake horn? Notice any performance gain?

[@dougconway9663]

Love watching Andrew keep it up

[@tietie1424]

how much did you get the truck for, and how much do you estimate all of your mods cost as well?

[@reytech1786]

Awesome ❤❤❤ love your channel and your truck

[@dodgeboi2095]

@justdiesels Do you hit your 5in axle dump at all when flexed out? I’m just curious as I’m getting a 5in for my 2003 and I still can’t find the answer if it will hit when flexed out.

[@MechanicMark613]

I have a 2006 Ram 3500 dually which I am building for towing instead of speed (don’t care about getting there to quickly) this is my last truck too

[@jordinrosendale3594]

Did you change axle gear ratio? What’s the average mpg with new tunes

[@jamessells8440]

Absolutely love “the Dodge” just curious.. I’m thinking 20k on total build ? close ?? glad you’ve been able to live the dream with the truck 💯👌

[@Bgrov522]

Where did you get the front tow hooks?

[@ericl5973]

I kind of wish I went with the Dynatrac free spin kit like you did. The machining look a lot nicer and the stick out seems to be better but I wasn't able to find numbers on how much shorter the stick out is compared to others. I couldn't justify over $1000 difference over the Yukon.

[@JustDiesels]

I had Yukons on the last truck and they’re super solid hubs. Don’t regret those for a second!

[@kohlgossler7083]

So as of now I think you have the apex steering and the dual carli stabilizers. Do you like that feel better than with the Fox ATS setup?

[@JustDiesels]

Yeah definitely. The ATS is a neutral stabilizer, so you can do nothing to account for tire pull. With the high/low carli setup I can fine tune nitrogen pressure to account for tire pull and road crown pull. Makes for an overall better driving feel than the ATS.

[@edwardstroko4665]

How much is that self healing clear wrap?? That’s cool!!!😎💪🇺🇸

[@christiandulaney1638]

That probably cost about 6K-8K if not more. Its insanely expensive

[@JustDiesels]

Yeah that’s about right. Not cheap, but well worth it.

[@nicolaisvlog8701]

I have never own a truck, is a ram 2500 a good choice as the first pickup ?

[@toddjohnson2857]

Did you put leather seats in your 3rd gen? What are your thoughts on Katzkin leather covers?

[@JustDiesels]

Not yet. Still looking at options

[@toddjohnson2857]

@ I am about to pull the trigger on Katzkin leather, they have a Black Friday special plus they can add custom Cummins logo on the leather - looking for someone who has used Katzkin for their truck, price is 2k - have you heard any good things or bad things about Katzkin?

[@malachicress7126]

Whats your MPG on it? Please let me know i would love to know thanks

[@BeyondConventional]

Great truck!

[@LucasHelms-ri5hn]

Anybody know what this guy does in his day job? These videos are awesome, but the amount of money he throws at these projects is insane.

[@jeffreylehmler861]

What tow mirrors did you swap to?

[@lbj808]

Awesome vlog!!👍🏽..What happened to Cab over America cab lights?

[@JustDiesels]

They got sold with the last truck!

[@mattt3475]

Super nice job with the truck and the video! Look forward to more great content, Cheers!

[@JustDiesels]

Thank you!

[@MrNobuddy22]

I just bought 3rd gen 2005 dodge ram 2500 auto trans how do I know what kind of transmission I have ?

[@js8982]

what is the expected or recommended life of the wrap?

[@JustDiesels]

It has a 10 year warranty, but if stored inside you’ll get an even longer lifespan out of the film. It’s extremely nice stuff.

[@spencersgarage]

Did you paint the front and rear chrome bumpers? Or are they different?

[@JustDiesels]

I swapped to the actual sport model front bumper and ready to paint primered rear. I have a whole video on it!

[@AR-ts2qr]

Does that halo 9 have a power button or is it on when the truck is on essentially always on? And can you control the brightness?

[@JustDiesels]

It’s on with the truck like a normal head unit, and does have a wire to tap the factory dimmer in the dash.

[@baht_and_paid]

How do the cts3 insight monitor work with the efilive? Does one of them run on a passthrough obd plug?

[@JustDiesels]

All you need is an OBD2 splitter to run both.

[@baht_and_paid]

@@JustDiesels I dig the srt10 gage pod and cts3 insight combo. It's very clean.

[@kejung1]

Great video! Thanks 🙏

[@theclinchdrive]

Awesome videos man keep them coming. I’m from Australia and have come across a low mileage mint condition 3rd Gen 2500. Could you please tell me what the factory GVM payload is ? I can’t seem to find a strait answer on google. I’m a heavy diesel mechanic and would like to use this truck for work carrying heavy loads and wonder what they can carry. Plus is there any decent GVM upgrade kits around ?

[@ALDAVISON231]

looks Awesome!

[@Gunner0877]

I've been following your channel you have alot of great info. I've been wanting / looking for 07 Dodge 3500 Mega Cab but all I can find is 08 3500 Mega cabs with 6.7. I found one that has 216k miles on it it's been at the dealership for awhile now. Do you think it will worth getting or could be problem later? Any advice would be appreciated thanks.

[@AR-ts2qr]

6.7’s are great trucks if you tune and delete early to avoid tons of headaches down the road. But the only downside is smog. Hopefully you know a “guy”. With an 08 you don’t have to worry about DEF. AND you get 6 speed auto trans. If you get an 06 5.9 you get a 4speed auto or the unicorn 6speed. I love my 08 and will be my forever truck. Take care of it and it will take care of you. GL

[@MrDeadmanPompous]

Did you run nitro recon tires for awhile

[@noahparrish2642]

did you get the halo 9 f409or f509?

[@cmoore555]

Two questions……which shop did the wrap? Second question, I’m in so cal as well and I’d be interested in buying your carli hi and low steering stabilizer if and when you upgrade. I’ve got an 06 5.9 4x4 with 150 on the clock. I appreciate all the videos, keep it up!

[@JustDiesels]

American Wrap Co did the work, and I’d highly recommend them. The team is literally one of the best out there for the work. americanwrapco.com is their site. As for the stabilizers, I’ll be keeping them with the linkage upgrade!

[@ninorcsinned3465]

How do the wheels have poke if they have a positive offset? Serious question

[@JustDiesels]

Because there’s more to wheel/tire fitment than that. Even a +18 wheel pokes out from the fender on these trucks.

[@ninorcsinned3465]

@@JustDiesels oh so I can depend based on axle width and body width?

[@JustDiesels]

Exactly, body shape, axle width, wheel width, and tire sizing all play a role into the fitment of your set up. You have to understand how everything works together on the particular platform to know how it’s going to look, and what specs will achieve the fitment you’re after.

[@cognitivedissonancecamp6326]

It's a great build. Our trucks are extremely similar except mine is a Laramie sport with a 4 speed auto that got the BDS upgrade and torque converter. If you want to sell your lights when you replace them, let me know your price, I need to do mine.

[@infernoking7504]

I would of kept it stock just looks better in my opinion but those big tires sure do look sweet!

[@dessicino123]

Who makes the rear fender liners?

[@JustDiesels]

They’re factory Mopar liners

[@dessicino123]

Thank you! Love the channel!

[@masonhelton9498]

Do all of the suspension mods affect the towing capacity? I know this build isn’t geared towards towing, I’m just curious.

[@theoneandonly2590]

No, it’ll tow just the same. All their suspension is designed to maintain factory tow ratings.

[@JustDiesels]

The leaf springs themselves reduce capacity, but it’s easy to supplement with either Carli long travel airbags, or Timbren bump stops, which is what I use. Just bolt them in towing and then remove when done.

[@TheKlamminator]

Did you re gear your axles?

[@JustDiesels]

I did not. With 37s I'm still turning over 2k rpm at 70 because of the gearing on the G56.

[@xInline6]

If you know the new owner of the last truck you should definitely take pics of them next to each other

[@JustDiesels]

I do! Sadly he’s all the way in Colorado, but someday we’ll get them together.

[@managutaos]

Great build! I’m a disabled Veteran on a budget. Are you interested is repurposing your old parts. I have a 2006 5.9 Cummins with 225,000 miles. Needs love since I’m the 3rd owner. 👊🏼

[@juscallmeric]

How much are you in for all the mods?? I'm getting into this soon and curious what the rabbit hole will cost me..

[@JustDiesels]

Hard to say, as I’m thankful that I’ve been able to work with almost all the companies involved on this truck. Definitely makes it more attainable!

[@juscallmeric]

that's what I figured, but for the average Joe...what would be a good guess?@@JustDiesels

[@AR-ts2qr]

@@juscallmericabout 15k on suspension alone. Starting adding up from there lol

[@leventelaisz]

my guess would be close to 100k, but i would like to know too haha

[@JustDiesels]

Yeah honestly if you take the actual value of the truck plus mods, it’s maybe 80-90… kinda nuts.

[@BrandonLeech]

From Grandpa to "I'm parked out front of the food court babe"🤣

[@DolphinDivingChamp]

why not a mega cab?

[@JustDiesels]

I honestly just don’t like the look, and prefer the handling of the shorter wheelbase.

[@DolphinDivingChamp]

@@JustDiesels on a trail? cuz definitely not with a trailer

[@JustDiesels]

Yeah off road the quad short bed feels like a rally car. I love it!

[@michaelbissey6196]

Super jealous

[@NKeller2]

damn son i remember when you bought that thing

[@JustDiesels]

Doesn’t feel like that long ago, but here we are!

[@jacobherz6923]

this makes me wanna sell my 2g and buy a 3g lol

[@kmack282]

If only it had an nv5600

[@jakehauber]

All it needs now is 40’s 😉

[@rayberry5687]

First comment. Thanks for the awesome content

[@APBB84]

Do you think you'll ever own/build a 4th gen?

[@JustDiesels]

I’d love to at some point!

[@drunkpolack7612]

Why does every cali truck guy put on methods or kmcs?

[@JustDiesels]

This has neither of those

[@AR-ts2qr]

Because Brocal!

[@adventure406]

She looks nice. I have a 3rd gen and all I’ve ever wanted to change is the god awful ride quality

[@gamecrazy203]

This dude grew up with rich parents lol im hating becasue i grew up poor

[@JustDiesels]

I work my ass off for everything I have. That’s why you see me take care of it rather than blowing it up for views.

[@gamecrazy203]

much respect then man! you got gold and you obviously know it. you're in the 1% of people that love this hobby and have as many rigs as you have in this condition @@JustDiesels

[@DolphinDivingChamp]

@@gamecrazy203 make diesel trucks your job and you also get to own cool rigs

[@mxerb5912]

I’m guessing he gets most of the parts and labor at a steep discount. No one one who really “works their ass off” would dump 50grand into a 20 year old truck.

[@gamecrazy203]

@@DolphinDivingChamp I wish that would be the dream job.

[@Sdukes001]

T.I.T.S. Love CJC awesome products amazing customer support.