BUILDING MY T6 ENGINE!! //VLOG 13

[@Mark.Coughlan]

Love the series. Great to see you using the lovely T6 engine it such a great machine. I have a B6294T and a M90 gearbox for my 280z. What flywheel did you use that mates up with the T6 starter?

[@emillundin8461]

Sorry for late answer , a used o new billet flywheel. Thsr you can get on several sites 👌

[@Mark.Coughlan]

Cheers. And what turbo and injectors are you using. It looks sweet

[@p0intdk]

Where did you get that Turbo manifold from? Did you guys make it yourself?

[@242bleek]

Very nice. Whats the power goals for this? Are the T6 blocks stout?

[@emillundin8461]

I'm running 420 whp and 550 wnm. But we're gonna try to run little bit more next year !

[@JeanLucasBorges]

Gostaria de saber sobre a flyweel

[@nilsemann97]

Hey man. Im building my s13 180sx drift car. And considering using a t6 engine that i have.. do you have any info and specs about the engine build? :)

[@vidarbentzer3202]

I think he is using the stock internals, but new injectors. But im not really sure what turbo he is using

[@cosworthteamruse]

did you use the 3.0 engine or is a bottom from 2.5 with crank from 3.0 and t5 pistons ?

[@emillundin8461]

Neither, it is the 2.8 liter T6 engine from the Volvo s80 / xc90. 👍

[@yasjasim2487]

Very informative and beautiful work! What gear box did you go with and what about bell housing and such?? I’m having a issue finding a whitebrick bellhousing for my t5 engine build, What bell housing did you end up using if you did use one? Thanks mate!!

[@emillundin8461]

Im using the bmw zf gearbox! 5 speed. This gearbox has a rewelded volvo bellhousing on the zf gearbox so it fits.

[@cosworthteamruse]

@@emillundin8461 which model from bmw,and any fabrications to the propsahft are needed ?

[@emillundin8461]

I think it was from a bmw e46. And I used the propshaft from a m47 gearbox (from a volvo 740). They fit to the zf hardy. But it needs to be shortend 👍

[@cosworthteamruse]

@@emillundin8461 thanks for the reply mate

[@ammarjbintelmaha5257]

Does this engine have the same durability as B5244T5 ??

[@emillundin8461]

Yes 👍

[@phishphood423]

If it is the 2.8, yes.

[@beastman.330]

Couldn't you tell me how good is the 6 cylinder engine, how much power can it take because I think it a volvo 2jz .

[@emillundin8461]

Okay. The big difference is that the t6 block is aluminum. So it's weeker than the jz block that is cast iron. But I run 420 whp and 550 wnm now. But we will try to run some more power next season. And I will update you guys!

[@Quistpower]

Do you have stock internals and inletmanifold? Except head studs..

[@vgge91]

Var du tvungen att göra något med brandväggen för att får plats med 6an? Och ifall du kör zf var du tvungen att gör något med tunneln? Mvh

[@emillundin8461]

Nej den är orörd! Jag köpte ASS motorfästena, då passar det med zf lådan också utan att göra något 👍

[@Manuqtix.Manuqtix]

2jz from Sweden

[@batfriz]

Tjena, vad har du för stakar och kolvar?

[@emillundin8461]

Jag körde oöppnad motor. Bara arp-bultar i toppen och en ny topplockspackning 👍

[@batfriz]

@@emillundin8461 okej och dem håller för effekten? vad har du för motorkod? Vill stoppa en t6 i Lexus :)

[@emillundin8461]

Ja, håller man sig runt 600 nm i motorn ska det vara safe. Jag körde dock 630 wnm och 500 whp nu sista gången. ☺️

[@batfriz]

@@emillundin8461 tack för info btw jävligt snyggt bygge du har =)

[@emillundin8461]

@@batfriz b628t hade jag

[@FoxPerformance326]

What gearbox do you use ?

[@serkangurbuz6231]

Çok güzel