Building Street/Track Drift Car VS Gamer & Friends

NEW MERCH DROP ► bennysurge.com/
Instagram ► / benny_surge
Patreon ► / bennysurge
Shockworks ► www.shockworks...
GKTech ► www.gktech.com/
Born and Thread ► bornandthread....
BUSINESS ENQUIRIES ► [e-mail]
Filmed, Narrated & Intro Edited by Surge
General Editing by Eden & Surge

[@HardAngle]

Did the same thing on a G35, installed a full dual exhaust, headers, test pipes, resonators, and the rest all the way back. Took it for a test drive, came back and immediately put the cats back on, it was LOUD.

[@irresponzible]

I installed headers, Motordyne ART pipes (had them on the previous exhaust) and a Motordyne TDX2 cat-back exhaust. It was... anti social. I had buy some cats to quiet the thing down. Sounds great now though. I've got PPE LTH on the way, so it's probably going to undo all that anyway lol

[@Mr_jz_12]

Doesn't help that the z motors sounds like ARSE too.

[@mirrekku]

@@Mr_jz_12 they only sound good when cammed and like insanely aggressively tuned and they still need a decent exhaust system and not some fckn GUTTER PIPES

[@ConfusedGrandpa]

So I’m not the only one LOL. I still have my old test pipes sitting in a box in the closet, and I don’t even have the 350z anymore

[@thecosmicnebula_]

Bro the MC and OSRS music makes this a different vibe, I love it

[@ZackTheFang]

Same thoughts bro, recognized that shit immediately 😂

[@itsanofromme6099]

The odst ost is by far one of the best soundtracks ever

[@vroomvroom7]

c418 chirp 😍

[@willwastaken]

To smooth out the exhaust note, put a muffler style resonator (such as Vibrant Ultra Quiet) on both forks of the Y pipe. So you'll end up with two muffler-style resonators that merge into the hotdog you installed. This'll result in a really smooth sound without sacrificing volume. If you don't have the space for that, weld a muffler style resonator into your cannon at the rear. That'll do 75% of the job and will really reduce the trumpet

[@Globerson]

35:15 “I’ll have to rub off, when I get some time.” Don’t we all mate

[@slowaccord]

I like how with this channel he has not only documented his progression in drift skill but you can tell he is doing more and more of the dirty work on the car with each vid.

[@LukazRC]

Oh bro what good timing I'm waking the kids up for this one lol - Qld 2:48am

[@datzgaming9961]

It’s only 6pm in uk so it’s best timinf

[@W1PED_]

@@datzgaming9961currently hitting this video at 2:44 am in UK😭😭

[@DirtySlapper99]

Yea i was crashing out and seen it like broooooo 😂 I'm not on the bag's

[@ehdollet9641]

Perfect timing, just needed something to watch while installing mods for skyrim

[@SilverSwagboss]

im doing the exact same thing. I'm downloading quest mods and new area mods so it takes a good while without nexus mods premium

[@creatineforthesoul6495]

I'm waiting for my frame on warframe to be completed. 48 hours will finally be over by the end of this video

[@GhostMP4Rust]

good to see the minecraft faction money going dandy

[@OPEK.]

The absolute biggest mistake you can possibly make with a street/drift car is putting a loud ass straight pipe on. If you go sliding at any spot. You immediately have to think about “who can hear my cars tires and exhaust from here?”. It’s ALOOOOT funner, having a 20-30 minutes sesh at a spot rather than 2 or 3 runs. Trust me

[@donmafi3514]

11:37 caught me so off guard💀

[@possibly_ben]

you mean 11:07? or 11:04...?

[@lonewolf-ny2ex]

Love watching his skills progress!

[@JCYT]

Yeah Benny good stuff! We met at WTAC last year when you told me about the 350! I've been learning to tig the past few years and feel the same pains you had with the fitment hahaha Welding two pieces of metal together is easy but FABRICATING is an art i still suck at. I suggest next time, fitting it all up and tacking it on the car. It will save you from headaches! Keep it up man!

[@deliciousFries]

I love this fucking channel sooo much! The vibe, production quality the music is just amazing. You a legend Ben keep up the good work!

[@ShowMeYourTates]

After binging all of these drift videos from beginning to current in the series, it’s amazing to see your improvement in the shop, behind the wheel, and making some great new friends along the way

[@shanemctrelldog]

Rest in peace Bella, you will not be forgotten.

[@ericmcnair8417]

10:03 my G with the OSRS soundtrack!!! Hot Tip: For my GKTECH hydro, i needed to cut the bolt itself on the hydro reservoir plunger, i needed to take a quarter inch or more off to make the handle fit better, now it barely hits the climate control... it'll still hit no matter what.

[@lachlanmckenzie2443]

Tips for the stainless welding mate (I’m not trade qualified, just have some clues) the colour of the welds indicate that you’re getting a fair bit of contamination, as well as being to hot, the colour I’m talking about is that dull gray black, you can think of that like burning the stainless steel. The ideal colour your looking for is a straw gold, but rainbow is ok. Play around with your amps, the lower the better with stainless, better to move slowly than ruin the material, and sometimes lowering your gas flow to more around 7L/m on a lower amp setting will help with the quality of the weld, also PRE and POST flow are essential, i usually run 5-7 seconds of post flow when welding stainless of that thickness, and pre flow is also essential, give the wand button or pedal a click on and off again to trigger your post flow and let it surround the area you are about to weld with gas. Your tungsten should hover 1- 2 mm above the weld, and the tungsten should stick out from your cup about 1cm. Also try to keep your filler rod inside your gas cone. Also best practice would be to purge the inside of the exhaust with argon also but it isn’t suuuper important at your stage. Love the videos my cousin, hope this helps you.

[@Sergei-King]

RIP Bella. Beautiful doggo

[@nitsuagaming1201]

My 2 fave Australians I did a thing and Benny surge both posted on the same day. Todays gonna be great I can tell

[@FelixDrifts]

The second you said test pipes I knew you were fucced lol. Good vid as usual

[@johncarella1836]

Been waiting for this! This is some of KZbin’s best stuff! Million subs soon! Great stuff Ben!

[@niklitch]

I laughed way to much when doing the roof racks “aw yeah your a fkn dog aren’t ya” 😂😂😂

[@beets4952]

The look of regret from how loud it was without the cats 😂

[@machwiz]

I’m so proud of you Benny bro keep posting this stuff man really enjoying it

[@ThatHoodlum19]

Good call with the ressie add. It looked like you weren't gonna run one at first. Welding and pipe cutting to fit up is all a pain to learn, keep at it.

[@bordemization]

Can wait to start the project myself! Gonna be fun asf! Especially when I'm watching you 😂

[@vahalyr]

I love the suprise visit from the Stig at @30:07

[@crimson_weenus1725]

That CV job was top notch boys!

[@QuBaTiOn]

Put some small hose claps on the exhaust hangers to keep them in the rubber mounts. It keeps your pipes from trying to rage quit when shredding.. 😎

[@cpzmelbs]

Top tip, I need this 😂 Wont they tear up the rubber though ?

[@elimeme1764]

45:06 so glad Hyundai's got some love on this channel 😂 in terms of value for money, Hyundai>Honda. best daily you'll ever have

[@Bastardcore]

48:29 hell yeah, I have that honda fit car

[@kefinkatt]

Love the music selection and storytelling!

[@TM-eq9tx]

Hold the welding gun close to the weld for 5-10 seconds after u finish the weld. If you keep pulling the tip away after you let off the power you let oxygen get to the weld compromising it

[@TheSheepinator]

Rev banging the getz on start up is crack up

[@yeaboi123]

music @ 11:00 got me feeling like I'm in lumbridge

[@MrJudger567]

RIP Bella we'll miss ya legend

[@MaxLord67]

every single time this intro is magnificient

[@lackofsanity9329]

Let’s get this man some proper welding lessons. But not to bad to start I would recommend bringing that tungsten back to about 5 mm outside the cup and make sure it’s sharp when doing stainless red tipped tungsten works the best with stainless but keep it sharp if it is burning up the tungsten to much without you even touching the material turn the gas up during your weld or post weld. But definitely recommend like the tig welding tafe course

[@JackDb56]

The production quality is insane i have no idea how you dont have 1m+ subs

[@jinx8487]

Benjamin you frickin legend

[@Rockport1911]

Unleash the trumpet :) Catless and straight pipe is a bit much tho, Bro wanted to see his neighbor again :)

[@StarRaker101]

The whole exhaust installation had me stressing but I remembered it's a drift car also the roof racks were a smart play and looks alright. RIP Bella

[@rossslater4609]

you pranked your self with how loud that exhaust was bro!

[@s13raceraustralia]

butters was demanding but ya gotta love him

[@maxsanchez15yahoo89]

These videos are main channel worthy

[@Kronin-n6f]

it's the devils trumpet for a reason. Got a cat back for the V35 c*nt is loud af but i love it.

[@ham_sanga7]

Loving the 350 drift series surge! cant wait for the next ep yewww

[@thataussieguy2478]

If you want a straight pipe like that you should put a turn down exhaust tip on it you will keep the noise but the sound would be a lot better due to it facing the ground

[@theboy2702]

Would love to see some aussie car meets on the channel 🎉

[@itsanofromme6099]

The ODST music is pure bliss love it

[@wademitchell72]

I want feed back on that roof rack down the track your a brave man

[@livioletteriello9291]

26:54 GYATT DAM

[@Overcharge1]

btw with the tig welding make sure your tungston is as sharp as you can makes the welding go to a smaller point and betters the weld. and it doesnt stick to the metal as much, anytime it sticks you gotta resharpen

[@am55255]

Good lord, that intro went hard.

[@3n3ly7m9]

No copyrighted music this time, some very banger sound tracks you got

[@ddarcyy4367]

surgey i reckon this needs build needs to be renamed to "absolute fuckin defect magnet"

[@TheRealPatrickStarOfficial]

I reckon you should cut that tip down and do a pie cut. Heaps more work for no reason but would look better then the 7 meters of pipe hanging out the back 😂

[@hazerman101]

just a tip you have to spray a uv coating on the headlights or theyll yellow within a couple weeks/months

[@canadianrambo5084]

Nothing like a Benny upload and a Friday

[@snakezulu7]

A while back, Hoonigan had a G35 (VQ motor, just like your Z) and they welded in as many resonators and mufflers that would fit under the car to make it quiet or sound less like angry elephants. 💁‍♂Some food for thought!

[@_s_smokey]

Mum can I get a Motordyne exhaust for my 350Z? Mum: We have one at home. The Motordyne at home: (This Z sounds good, embracing the trumpet sounds)

[@kylekeast]

have a crack at wrapping the 350, I’d watch that

[@ImThatKidMike]

A good muffler and resonator would be vibrants I’ve seen a couple g’s with a ultra quiet resonator and one of their mufflers after the test pipes and they sound p good

[@ToyTehShammy]

Hollow out the cats should muffle it a bit and give more airflow

[@ddi_spec]

Amazing content, yet again, Señior Surge. RIP Bella 🕊️

[@RogueCowTurd]

the loose tie rods gave me flash backs when my s15 snapped its hyme joints not once but twice. luckly they both gave out in carparks but one time it was just after i got off the highway. wild seeing your car wheels point in 2 different directions. they were gktech units and after contacting them about it they said stuff like "yeah na, 100% installation error, our stuff doesnt break but here, have our new stronger ones" like wtf why make stronger ones if the existing product doesnt fail? anyway after the second time i threw them in the bin and got some quality hymes. dodged a bullet twice thats for sure

[@0ogis]

Been waiting for a Benny Surge vid for over a month ya dog, you keep me waitin like that again and we gonna have problem.

[@chicken4ever833]

I love your vids I feel like I’m watching a gaming video but it’s cars

[@rhysthornton9796]

Epic runescape music montage 😂

[@_frankie_5927]

17:24 little big planet bro omg

[@possibly_ben]

sorry to disappoint, but that's chirp from minecraft, not the orb of dreamers

[@itsinvis5403]

Put high flow cats in it. Quiet it down a little but it’s still be painful lol

[@sniccers7218]

before first startup i was like, fuuuack this is gonna be loud. But jesus christ xD

[@toonzy7219]

Bro I saw you at Winton you killed it

[@ShepherdPies]

The Osrs music hitting me right in the feels

[@aaronmx123]

so sick man the car looks bad assssss ! can't wait to see the event

[@areebchandio9623]

53:38 the falcon is on steelies and would you look at that, the same wheels on an SX 🤔

[@Cry_theonly]

Without finishing the vid as soon as I saw them test pipes I knew it would be fucked haha. I ran berk HFC's with a stillen y pipe and tomei. (You can imagine what test pipes sounded like with a tomei)

[@Fleant]

Love this episode !

[@bongoms]

loved this video as someone with both fab experience and several years of ownership of a v35 sedan. I saw so many of these problems coming 😂 I legit gave myself tinnitus from driving the car straight piped so many miles. all the test pipes are dogshit quality and make the car super loud. and be ready to replace thoe flex sections on your y pipe they blow out All the time. get a pedal for your tig machine it makes tacking and heat management sooo much easier.

[@AJVAN_]

Keep in mind that the engine moves and those clearances.....seem too tight. Even if you put poly mounts

[@thiccyy8181]

To be fair your welds don’t look like shit anymore, good shit on the car bro

[@MrJoelibear]

The RuneScape music is amazing

[@avocette]

mint stuff mate 😎😎 trim mod's still ass though, might be best to cut and reweld the handbrake handle on a zigzag to clear the plastic.😊

[@daviduprichard8343]

Was not expecting minecraft music here hahaha

[@manuelramos2746]

this vid made me feel good inside

[@BladeMariana]

His girlfriend must hate him. He went from gaming to cars. Very good vid

[@liambenno]

Need those caddilac converters

[@RagdollRacingInc]

Benny your a sick hunt great vid mate

[@antoineleclair3290]

the neighbours called the air force after you started it with the test pipes

[@Seabass_rides]

Benny,mate you make some great shut. I would watch a 3 day long video of you doing you car stuff. Keep it up. From you mate in Canada.

[@thehammann6670]

Absolute LEGEND

[@fateyzed7798]

45:40 Man of *Culture*🗿🍷

[@zNxesxALT]

Waking up to another banger video

[@MusicHackersOfficial]

damn the halo 3 odst music

[@Orangemarrow556]

Please do another rust video surge they were my favourite and so funny

[@troyza1988]

Bros got some strange sound tracks going on sounds good

[@Repent_By_Drift]

How do you find the hydro being in the inside?

[@ZZZRG]

gamer to gamer wear trousers when welding brother cant be having benny getting cancertrousers

[@night_exec]

just bought a hoodie they're dope

[@Thescarwing]

the secound you said u where removeing the cats a just rofled and knew u where gonna regret it XD