At first I thought, "It would be cool to see how much weight the studs added," then you weighed them. Then I thought, "it would be cool to see the condition of the ice after ripping on it," and then you showed it lol. Very cool video and awesome shots/edits.
@Nomadic-Nerds6 ай бұрын
Good contestants for the scale of doom!
@justinmochi73236 ай бұрын
Sabo always thinking about weight over here
@Mnsnowmoblieboys6 ай бұрын
Loved the predator build I have one my self
@MichaelSabo6 ай бұрын
@Mnsnowmoblieboys glad you enjoyed that series man; I miss that quad
@drewkuntz21746 ай бұрын
I ride my studded Outlaw on my local river. It’s basically like a frozen road course.
@israelsalguero61263 ай бұрын
That looks awesome driving a four wheeler on ice
@JacksonOffroad256 ай бұрын
Literally perfect timing! Love checking KZbin to see Pete posted 13 seconds ago lol looks like fun I’ll need to try it some day
@hermanmuenster14056 ай бұрын
Dude, EPIC video. From the time you took to get the studs lined up when installed, to the awesome quality of video. Kick Ass😀
@shaneyoman1196 ай бұрын
Dude, nicks my best friend! Great guy to get advice from, basically all my videos are either him and I or him racing, glad to see you’re joining the ama stud gang!
@LandonShaw146 ай бұрын
The drone shot at 16:30 was phenomenal. Great work pete
@timothykinsey66856 ай бұрын
Pete, Quad ice racer up here in Alaska, former, getting too old now. Advice...you don't need the nuts on the inside. I put them in my first set of tires I built, former champ told me a waste of time. Screws never came out, and usually take a week to leak down. Also, watch the Kold Kutters install video, you lean the screws back as you install them, so only one edge touch's the ice, both front and rear edge of screw on ice makes quad "skate" too much. Great corner speed comes from weighting the outside nerf as hard as you can, I would actually sit up off the seat about 1 inch and lift inside foot, pushing down outside foot, huge difference in speed. I made my own tire raps from old tires, cut sidewalls out, and cut the tire in half. Now you have 2 "C" shaped pieces, use 2 hose clamps to act as a hinge between them (much easier to install this way). And I used large copper wire to close and tighten them on the ice tires. NEVER let your screws touch anything but ice, they will dull on anything else, and you won't realize how much. If only racing ovals, you can stagger tire height left to right ALA sprint cars, incredible corner speed, but horrible starts if you wheelie off the line.
@Jesiah-Rod886 ай бұрын
Pete, you’re so nice that when you said “I need a break from doing the tires” most people would have had a different choice in words 😂. great video, SICK SHOTS AND EDITING!!!
@foxpuremage6 ай бұрын
That edit was sick 🔥
@JBRAAPY6 ай бұрын
This video and other ice video are my favorite...thank you for such great content!!!💯🔥👍🏼👍🏼
@dakotaknight6766 ай бұрын
That is sick haha I’d do something like what you did on my raptor, but we hardly get snow and ice where I live. Great video brother
@leedimatteo50786 ай бұрын
killer wheelies man, def going right!!
@KuyaBradford6 ай бұрын
Sweet video! Thanks for sharing!
@bearkreekboys6 ай бұрын
Enjoyed watching the studding process!
@Travis_Does_It_All6 ай бұрын
Heck yeah! I used to do this on my dirtbike back in the day. Always worked like a champ. Salute!
@bigfootandbananaman47466 ай бұрын
That looks like fun
@edwardstroko46656 ай бұрын
I’d be scared as hell on ice but damn , sure would be fun!!!😎💪🇺🇸
@trop1calsea7166 ай бұрын
sweet pulls!
@SQUARE1SpeedChannel6 ай бұрын
Now I know where crop circles on ice come from. 😅
@PeteHager6 ай бұрын
🤫😆
@brokejokeratv58516 ай бұрын
I gotta alot of favorites but when it comes to KZbin and atvs pete hager is a beast!!!!
@MnWarrior3506 ай бұрын
This was so awesome to watch. Having just experienced the ice with studded tires, I was loving this video. Those drone shots were insane. I'll have to have you rip one of they boys Blasters with the studded tires next season.
@AboutaMileAdventures6 ай бұрын
My hand is cramping just watching this lol
@jtyler78576 ай бұрын
Love it, a lot of patience needed studding those tires!
@PeteHager6 ай бұрын
Whole project was like 12-13 hours of studding 🤪
@jtyler78576 ай бұрын
Wow I believe it!
@Hubbard_Randall696 ай бұрын
Never a disappointing video Pete. Love the idea of you racing on ice.
@aldyson34696 ай бұрын
You shold consider installing a kill swich cable. You ever happen to fall off while its in gear it wont stop rolling until it hists something hard enough to stall it out. Also most official race events will require you to have it
@PeteHager6 ай бұрын
A tether is a good idea. I’ll have to look into that this season 👍
@aldyson34696 ай бұрын
@PeteHager they aren't hard to install. Also set up your rear suspension with the rebound setting as slow as it will go. And a lowering kit and wheel spacers will help. When you are going into a corner you want to lean over the side hard. I put my foot in the nerf bar net with my toes on the bar to keep the center of gravity low. And moto riding boots . If some how you foot lips thoes boots will jam between the perfect bars and studded wheel stalling the bike. Studded will rip through pants and work boots and snowmobile boots like a meat grinder. Good luck 👍 and have fun. Lpl
@Nomadic-Nerds6 ай бұрын
That intro was sick! 🔥🔥
@Abeer-vn6yg6 ай бұрын
ذ😂ي٠😊😊
@blessedinjax6 ай бұрын
Good idea for a video and crazy nice air shot doin donuts on the ice
@bakermangaming24256 ай бұрын
awesome video man! i miss ice racing so much!
@leedimatteo50786 ай бұрын
Killer intro man!!!
@MT_Gorilla1236 ай бұрын
Awsome!!
@williamrowe94816 ай бұрын
Great vid fam
@leedimatteo50786 ай бұрын
cool video man!!
@Wheeler_Bros6 ай бұрын
Now this we can never do lol. its never cold long enough in South Carolina. Snow maybe, but it wouldn't stick lol
@edwardstroko46656 ай бұрын
That’s a lot of work!!! But it’s cool!!!😎💪🇺🇸
@Raptor700LV6 ай бұрын
I agree that too many studs are no good😅. Then you can't play on ice like that and for example do a 360 on a high speed.
@danielhansen3776 ай бұрын
Sick 🤟🤟
@NWO-Off-Road6 ай бұрын
Awesome edits as usual! I dont even want to know how long those tires took you 😂
@PeteHager6 ай бұрын
Like 12 hours to do all 4. Each rear was like 3.5-4 hours 😅
@NWO-Off-Road6 ай бұрын
@@PeteHager my guess was a full weekend in the garage, so basically 😂
@bryce_t_u6 ай бұрын
Can we all agree Pete’s edits are 🔥 nice tires btw Pete!! I’d love to know what editing software you use to tbh!
@PeteHager6 ай бұрын
Thanks man! I edit with Final Cut Pro on an iMac 👍
@bryce_t_u6 ай бұрын
@@PeteHager that’s awesome Pete love the content as always! You’ve been a huge inspiration of mine to post videos of my raptor so thank you dude seriously I’m very appreciative of you and the content!! Love how supportive and humble you are towards everyone keep it up man!! Thanks again
@SzpinoATV6 ай бұрын
😎👌
@OdysseyOffroad6 ай бұрын
That is so nuts! Looks fun, how thick is that ice?
@PeteHager6 ай бұрын
It was about 12 inches thick everywhere when this was filmed. It was trippy to ride on at times 😅
@emilianomijares74646 ай бұрын
I hope you get 200k subs
@keithmurray82496 ай бұрын
Love it🤣🤣 Pete Do you have a link to those Nerf Bars that will fit with the GYTR Heel Guards? Cheers Bro!
@PeteHager6 ай бұрын
Unfortunately I’m not sure if they’re available anymore. I special ordered them through ATVgalaxy 5 years ago. I would check with them. Otherwise the actual GYTR nerfs are really nice and fit perfectly with the aluminum heel guards 👍
@keithmurray82496 ай бұрын
@@PeteHager Great Cheers for the info Pete much appreciated Mate👍👍
@PeteHager6 ай бұрын
@@keithmurray8249 I did read a post the other day saying the powdercoat on the GYTR nerfs isn’t the best. If I bought a set I would probably get them recoated locally. Kinda of a bummer but they fit the frame/heel guard contours nicely 👍
@keithmurray82496 ай бұрын
So Glad I read this now Pete as I was about to get them, they were in my cart!! not a great selection for anything here in oz for Sport ATV's I get everything from the States, thanks so much for the feedback and see u in your next Video Bro🤘
@gipper222zk72 ай бұрын
@PeteHager Hey bro, I just bought a new "2024 Yamaha Raptor 700R SE 69th Anniversary Edition" it has the GYTR front grab bar, rear grab bar, front & back GYTR Suspension, & the big bore kit, & more that all came stock with the SE version, AKA= Special Edition. But I am definitely gonna put a "FAST FLEX HANDLEBAR" on it, but i also wanted to put a new full exhaust & a new full intake, & obviously when you pit a new intake & exhaust on pretty much everything you will definitely want to get it tuned, but this baby only has less than 1 mile on it, so i don't know if I should wait for the 10-20hours of the break in period then put the new exhaust, intake, & tune, before I break it in, or afterwards??? Any help would be greatly appreciated, even brands that would be best for this specific bike, which because it is a "2024 Yamaha Raptor 700R SE 69th Anniversary Edition" I don't even know if anyone has created a exhaust, intake, & ect... for this because its brand new off the showroom floor at the dealership, its just so new that even the lucky people who got w chance to but one they are keeping it completely stock, & not doing anything to it, but i already knew that I was going to make it at least 50+ inches wide, & at least an extra 6-8 inches longer, & then the "Fast Flex Bars" & the exhaust, intake, & tune, but this is the first brand new bike ive ever bought, i used to just buy slightly used quads, bikes, sleds, etc but I don't know if i should add the intake & exhaust, & tune before or after the 10-20hours of the break in period, so any help would be greatly appreciated please & thank you!!!
@pookythomasmoto91476 ай бұрын
What GoPro and mic set-up are you rocking?? Awesome video.
@jacksonhammersmith6 ай бұрын
Are your gold wheels just stock powder coated or where did you get them?
@Vazerin5 ай бұрын
Hey Pete I ordered a TRX250X case saver off your channel but haven't heard anything on it for a week, is something going on with DRW?
@PeteHager5 ай бұрын
Unfortunately DRW has had some production issues this past month and they’re a little behind. I was told case savers are being cut today. For future updates don’t hesitate to reach out on our websites contact page 👍
@MasonNeerhof-mg5sj6 ай бұрын
Love ur vidoes and ur quad Pete lmk when y want to sell ur raptor it would help a dream of mine to own that machine
@PeteHager6 ай бұрын
I can’t see myself parting ways with it anytime soon. There’s a lot of history on that machine 😅😁
@MasonNeerhof-mg5sj6 ай бұрын
@@PeteHager totally understand man but hey when the time comes if u ever want to I’ll be more then willing but other then that keep up the great content
@tylermiller34846 ай бұрын
Why dont you ride the yfz much anymore ?
@PeteHager6 ай бұрын
I actually sold the YFZ. Now that I’ve upgraded the raptors suspension it has become the ultimate do it all machine for me. The only time I really preferred the YFZ was on a track or hitting bigger jumps. I’d like to replace it with a 2 stroke eventually🤘
@thenarrowpathatvchannel43166 ай бұрын
How thick does that ice have to be for you to ride safely on it?
@user-zy5ld2hy8c6 ай бұрын
5-7 inches don't put a machine on it if it is any less
@thenarrowpathatvchannel43166 ай бұрын
@@user-zy5ld2hy8c thx for answering.
@____MC____6 ай бұрын
Do you have to tire slime those after?
@PeteHager6 ай бұрын
Nope, from what I read it sounds like most guys don’t put any sealants in their tires
@strix_-.58855 ай бұрын
what pipe is that??
@fearoshima6663 ай бұрын
Whats the topspeed of your quad (Raptor700) on the road @Pete Hager
@PeteHager3 ай бұрын
With the 15 tooth front sprocket the Dyno forecasted the top speed to be in the low 90's. I'm pretty sure I still have the speed limiter active on mine though. I've had it up to the low 80's on the pavement
@fearoshima6663 ай бұрын
@PeteHager I'm also going to get a raptor, but I want to make it so that it stands on its wheels the same as a YFZ 450 so that it doesn't tip over so quickly, do you happen to know what I need to change?
@aaronproctor246 ай бұрын
Did the tires leak air at all?
@PeteHager6 ай бұрын
They seem to hold air just fine for a days worth of riding 👍
@anonymous-tn6ij6 ай бұрын
5:02 what’s whole nother
@PeteHager6 ай бұрын
Whole nother tire** Its code for “I have another tire to stud” 😉
@do1yourself7626 ай бұрын
😘
@jameslachance91076 ай бұрын
Whats your summer tires pete
@PeteHager6 ай бұрын
I’ve been running Obor Advents the last 2 seasons 👍
@Chris-cx6qi5 ай бұрын
'promo sm'
@bearkreekboys6 ай бұрын
Hey pete! Would u consider sharing our channel? Hope your doing well!
@solti18146 ай бұрын
We want kilograms no lbs shit
@____MC____6 ай бұрын
Wtf is a kilometagram?
@PeteHager6 ай бұрын
You’re not gonna believe this but there’s a search engine called Google that will convert measurements and weights for you. It’s crazy. You just type in 19.2 lbs to kg and it tells you 8.709 kilograms. You should try it sometime 👌
@user-us6cq6zb2i6 ай бұрын
Hey Pete, just have a question I got a raptor and don’t have enough for a new pipe if I remove the spark arrestor and leave the air box on will the bike get hotter or will any harm at all happen I’ve seen mixed answers and not sure thank you.
@PeteHager6 ай бұрын
You should be okay to pull the spark arrestor. You could always look into getting a HMF or Yoshimura slip on instead of a full system to save a few dollars. Technically I’ve seen people riding without programmers and slip on exhausts but I recommend saving for a power commander to insure the quad runs properly 👍