Building the RX-7 a NEW Engine! (GEN V 5.3 LT)

metigulous.com...
Insta: Metigulous
Facebook: / metigulous

[@OGbqze]

You need to post more often. Also your shop is so damn clean.

[@steve-o6060]

I'll watch whatever you put out. Keep up content 👍

[@adamlambert3892]

Fr

[@Shadow0fd3ath24]

You gotta post more man, this is a huge oppurtunity to have 100k and a decent base of watchers, plus your skills are insane of fab. Could grow to be huge!

[@baby-sharkgto4902]

💯

[@imalec]

Excited for the end result. Hopefully it can make a trip to visit the boiz once it’s tested.

[@Ribbityibzki]

Man the last time I saw a video you were in was when you were building turbo manifolds for Kyle. I was at Wyoming Street wars today and saw you make it to the final. The car looked killer!

[@joshs199]

I can't wait to see the Rx7 with it's new setup. I think it's going to be ripping even harder.

[@alraybaca6235]

I wish you would do more videos you are really good at what you do and really enjoy your work/videos

[@robertmcmillen8600]

I have been watching you since the turbo geo. You have grown so much and it's truly awesome to see ❤

[@jd2181]

Know I'm late to the comments. But keep up the awesome work Hayden. Your craftsmanship is second to none

[@vintagespeed]

more content man, love your vids! she's gonna rip! 👍

[@trevorsmith9251]

Great to see you powering on and at 100k 🎉💪

[@stevereinhart4067]

1300 at the wheels on a pretty much stock 5.3.....good luck.

[@gkelvin521]

Please do a video covering the dry decked block

[@goldgitter3548]

You ran into a "shit happens " situation and handled it like a pro.

[@tracy2928]

Rodney is gonna come a knockin for sure. I don't see the stock rods hangin in there long. Nothing about your or your tuners abilities.

[@CCDzine]

Cool, you are still alive.

[@v4yt126]

glad to see you back

[@SirVic42]

Really excited to see the sparkling new Metigulous turbo kit you whip up for this!

[@okobojian1860]

Hey you put this out as I was flying home. Odie boat picked us up long hard day. About 21 hours of air ports and air planes. Looking good, plan on tuning next week. If I can I’ll try to make Wyoming.

[@dustinfrye9500]

Glad to see a video man

[@samleisch1388]

Every video is a banger man, keep em coming!!!

[@wadebonhomme2142]

Rough break on the studs!

[@MohdHairien_9]

Nice and clean shop Hayden.

[@Phillyracingsource]

Content is awesome brotha, love watching the racing videos and seeing how well the rx7 works on bare roads and all

[@9d5sn95]

Drivers side front headstud is a different size on lt motors, reuse the factory hex bolt.

[@Mopar_logic]

Good luck at the race!

[@Gokartsandstuff82]

Can’t wait to see you go fast

[@Backupnow-gf7wb]

Lets goooooo, keep up the grind 🔥❤️🔥❤️🔥❤️

[@n20cpri]

Gonna be a beast. 1300 is lofty! lol Good luck as always!

[@bnmperformancefab]

“To much more fancier” love it

[@Brandon-Moore]

Jimmehh sent meehhh 🤙🏻

[@cbdreamer1709]

Going to be so sick

[@luisa.betancourt5077]

You got this!!

[@199rocks94]

Ran into the same issue with arp….trying to get a motor together and find out they didn’t put the washers in the box

[@jjsyocum]

Great info, would love to see more explanation of the block and head epoxy 👍🏻

[@slappomatthew]

Congrats on 100k

[@MedusaForceRacing]

Ready for the next video.

[@1411MEDIA]

Looks good my dude. Need all the boost and fuel

[@daniesalex7073]

New 8 Rotor , yay

[@kzarnold3678]

Nicely done 👍

[@robwigglezz944]

Looking good. Sucks you were short a stud after waiting for nuts. Race car stuff haha

[@Lacunacraft]

Man, it looks so clean and damn is the RX-7 looking good. Not sure if you will hit 1,300 horsepower on it, but it should be damn close to it

[@matthewmcclintock5806]

It must be a pretty common thing at ARP because I've been short on head bolts and gotten mixed sizes from them

[@RaceBrosCarlos]

💪🏽 get errrrrr done!!!

[@the33l1ne6]

Hate it. Lol. Nah wicked watching your journey mate. Good luck all the way from Australia 🇦🇺

[@Smokey72013]

I pray with you. Guys have made alot on stock stuff properly setup and tuned. Ì honestly think all aluminum nlo KS should have incerts to keep from pulling threads out all the time.

[@shanewright6958]

Looking good 👍👍

[@davejames2015]

Ya arp can pretty much kick rocks nowadays.

[@joesf1026]

Second time I've seen the wrong nuts in a ARP headstud kit in the past couple weeks

[@hyper8545]

Sheeeeesh dood is alive

[@nickrussell5150]

Hope everything works out for you in the end with weight transfer

[@vgnope]

11:32 motor install squirrel pace

[@samdemartino2531]

What's the block weigh after the epoxy?

[@RedEyedPatriot]

My Bro JimmyDale sent me 😎🤘

[@winster0]

My Man

[@GTFCEO]

Nice block is filled already, and your girlfriends wicked pretty! The hair is sick and if you didnt know like i didnt until google told me, SBE means Stock Bottom End, not Small Block Engine like i thought lol

[@dougj.8288]

I would like to see more content… as for the motor I think it will make 1300, those motors have been impressive what people have done with them.

[@_Otaku-kt8be]

Damn didn't even know you still post videos.

[@wyomingwanderer7587]

Watched you run today. After your first pass your car was hauling dude. Don't know what happened in the finals but your car would have given Nate a run for the money

[@jameswallace1283]

really hope you show the rrest of the build and not in a few months. I think i could hold it but you are pushing everything to its limits .

[@jarredflynn]

Nice vid.

[@justinbonee8302]

Jimmehh sent meee

[@Mopar_logic]

Where have you been?! We need more videos, please.

[@RoOsKiE87]

Get er done

[@J.F.K.O]

fifth gen but still rocking with pushrods :P

[@andrewevans7181]

Doing the same to my 83 c10 hoping to make 1000hp on the street

[@jamesmiddleton8128]

Rock it!😅

[@rb30e]

Great

[@stoker20]

He'll get more views with a engine fail video. People love to see that. Cleeter has made a career out of blowing things up. Kinda like demolition ranch.

[@danieldelpha1315]

Why hard block if it's SBE? Is there some worry that the block fails before the rods?

[@Fackler91]

I hope it works but i think it won't last mor then a few passes. If you win the race though it doesn't matter after that lol

[@darksideperformance299]

Quality control slacking at ARP 😂

[@gasparsperformance9841]

Will you be making it to the street outlaw event at Bandimere?

[@LeapFrog_Radio]

🎉🎉🎉

[@russgregston4757]

I'm fixing to build an LS engine for my car and am looking for info to dry deck it. Any tips?

[@jeffreyfrench5715]

No, I think the pistons fail. 800-900 range.

[@NoLyinEvry1sDyin]

Replacing the 8 rotor LoL

[@k20eg69]

Does Sean still work with this guy?

[@billbaggins9961]

Just curious if you did any chassis updates since this DAWG was starting to really run? I thought you had mentioned you were going to but I haven't seen anything on the update

[@OGbqze]

#TurboCam Richard Holdener IYKYK

[@mortenhansen7908]

need a collab whit src billy and tommy

[@oldhomeguy8214]

You going to run locals only at Bandimere No Prep Kings?

[@obsessedracing7843]

It should do it if you don’t miss stuff like me lol

[@billwilliams2242]

More content

[@simanphenix5436]

I hope you do it so I can copy lol

[@jkfonyi]

I didn’t think stock rods and pistons in the lt could handle that much power

[@freedomfox8183]

They can for a bit the question is how long.. I've got identical engine but still full of water I lifted a head twice both times I went 39-40 psi in a race I'd lift a head by the 330... Hope his works good , maybe dry decking helps alot can't wait to see it going

[@derekmelton3915]

Yeah 1300 horsepower is cool but a Mazda 12b would be awesome in that lol😂

[@johnywallace8214]

If not one thing it's another😢😂

[@scaleaddict7688]

All that work just put stock rods back in it and hope it holds 1300 horsepower? Wtf kinda move is that?

[@bazzaf246]

❤

[@brucedarby2131]

What front struts are you running?

[@Freddys_retro_finds]

1500 or bust

[@madmod]

m-Tig! Sup dood

[@mikelellsaesser1320]

ARP really let u down this time, twice even. 😢😢

[@baby-sharkgto4902]

I’m not hating but I am genuinely curious, why stock rods and pistons? I could see if you are poor or broke but I get the feeling you are not. All the work and time it takes to go fast why not put some rods and pistons in it… you would have so much more confidence, longevity and strength.

[@johncoldwell340]

As long as GM wasn't buying scrap metal from china it should be sweet

[@nessie42786]

Is it an 8 rotor 🫰

[@williamcampbell6589]

I guess I'm not the only one ARP has let down. I swear, they can't hire people that can count.

[@kcmedia8185]

Send er

[@dimequeteimporta4222]

Dude you don't have any more subscribers because you don't post. There is no way on Earth, that aluminum block can push 1300 horsepower on stock internals, although I like the attitude.