Building the Ultimate Station Wagon | 2021 Charger Magnum Hellcat | 1000HP Hellwagon | Pt 23

I was able to revise the 3D printed transmission cross-member and now everything is ready to bolt the Trackhawk awd transmission into the Charger. I was planning on fabricating the transmission tunnel but changed my mind since the front diff is not yet mounted, so I ended up blocking the car out with 80 grit sand paper to get her ready for primer once again.
Business inquires @ [e-mail]
Patreon - / junkyarddave
Instagram - / junkyard.dave
*Send Me Fan Mail*
David Nenno

[@FastLaneLyfe]

Let's get Dave a million subs. He deserves it for his hardwork. Brilliant channel.

[@tonyanderson6493]

For sure

[@seabees30]

Agreed

[@bigsnude316]

Dave is a beast and the only youtube channel that I get notifications from. Watch his vids immediately. Wholesome, hard working dude with a cool ideas/project. Hopefully he puts this in some car shows when done so we can see it in person.

[@leem9886]

How? Buy them for him?

[@Shiftheads]

The more subs the crazier the builds

[@bigsexymuthashutyomouth2546]

I went to trade school right out of high school for auto body repair and the way you were explaining sanding is exactly the way the instructor taught us and used the same demonstration as for pressing hard causes the body work to be wavy. You're building an awesome build and giving good advice as well!

[@Mrpiraterias]

Damn determination is hell of a drug

[@lgproductions493]

🚨🚨CARMEET gets WILD SUBSCRIBE SUBSCRIBE SUBSCRIBE 👉🏽 kzbin.info/www/bejne/nJ21aJ55pNB5Z80 🚨qa

[@blaccghos5528]

This not even my build but I'm excited to see the finish product...damn dave you on it💪🏿💪🏿

[@cameronjohnson8949]

This guy building a car from scratch.. this is amazing .. Give him some kind of award please ... dodge ...someone

[@johnmerica5624]

Best magnum build ever!!! Great job dave keep it up!!!!

[@tonyanderson6493]

Edit, the only magnum build lol

[@monumentalmark3094]

@@tonyanderson6493 kzbin.info/www/bejne/eHOQiKh_ZaqWhZY lol

[@monumentalmark3094]

kzbin.info/www/bejne/oXilgqKiepuVmqc DJ Khaled voice “Another one” 😂🤣😂

[@rickytatum3205]

this is total motivation to go out and try it

[@andrewjohnson442]

Well technically it's a charger but nah I think it's a hellwagon now

[@greenmountainsuriving]

Dave at the end of your videos you always say "if you like these videos" Dude Like is not even close to the way I feel watching you share your plethora of Knowledge with us so elegantly almost effortless Your a True teacher you could run any paint and body collision school in the country thanks for sharing with us From Vermont with love and respect

[@twistymcslide2]

Dave, when the metal is bent, it looses a bit of length , add the thickness of the material , per bend , and then once in hand to shape, then drill / weld . etc. Really enjoying watching your progress. hope all goes smoothly. if you were local , id offer help .

[@j.cephas584]

Its better when you see it from start to finish, instead of just seeing one on the street. You actually see all the hard work involved. 👍

[@937MIK3]

Dodge gonna be like coming summer of 2022 we bring you “The Hellwagon”

[@Shiftheads]

2021*

[@937MIK3]

@@Shiftheads Production wouldn’t have it done that fast

[@Shiftheads]

@@937MIK3 Totally thought you said Dave not Dodge lol my bad

[@BassManBobBassCovers]

Not only is the bodywork going to be better than factory, so is the driveshaft angle! :) Lots of cool tips too great to know. I wasn't aware DA's missed so much surface area.

[@tomrockholm-timeless_morph6691]

I highly recommend to stop priming over straight 80 grit, you’ll get a much better finish and not have to worry about shrinking if you finish your filler/prep by knocking your 80 down with 180, 220 and sometimes I’ll take it to 320 before priming and block that primer with 180-320. Then on your secondary primer coats start blocking with 220/320 and finish your final blocking at 500-600 for your sealer and basecoat. You won’t have to fight deep sanding scratches nearly as much and reduce possible shrinking ten fold. Hope this helps, I’m a retired automotive and custom private aircraft painter of 15yrs.

[@upt-7900]

Doing the bird man hand rub waiting for this car to get done.... I'm excited like I'm helping him out 😂😂😂

[@ayetreybetrippn8064]

It’s not a magnum it’s not a charger it’s a CARGNUM HELLWAGON.....it’s a masterpiece it’s one of a kind if u love magnums and chargers this is the God of those worlds damn Dave u are a fukkn genius Man U deserve to have ur own car channel on mainstream tv

[@formula1dizzie326]

I tap in every time you update bro, amazing work you’re putting in to get this done! can’t wait to see it all complete🔥🔥🔥

[@maxrockatanksyOG]

An American who uses Metric. Aussie man crush incoming!

[@Junkyard_Dave]

It is much easier

[@williamdiaz6717]

whos hatin on Dave? give the guy a thumbs up! good stuff man!

[@callmeslick860]

Video is in my likes I keep watching this genius

[@juegamayin9904]

Congratulations Dave! Nice Job! I can not wait for the final product!

[@christopherbatty3881]

Anybody else here keep searching for that "next video" of this thing at ride height and some blue paint on it? Great work Dave. A true craftsman and inspiration.

[@cory0702]

Your doing things the old school way. This is how you don't miss things and it comes out straight as possible. This is going to be really nice here soon

[@willmatic84]

Love that you take your time with no rush 💪🏽😎 the end results gonna be worth it

[@gerrymontero113]

This got to be the best build on youtube rn

[@marcuswilliams8845]

@Dave - Your baby is coming along. I know you are excited. Thank you for sharing your journey, I am really enjoying it.

[@bobmrkus3185]

Nice Dave, I'm looking forward to seeing the finished product!!!

[@johnhinz1173]

Very good progress, nice to see things are coming along correctly.

[@jaylever4931]

the hellcat magnum gets better a better

[@georgemcjunkins4982]

Nice, stay patient and diligent. Details make your end game.

[@raynyhus2026]

Your car, your way.. how you perform the build is your business. I'm with you doing the hard way, sometimes the so-called easy way ends up costing you more in time. I believe the saying "is you don't have the time to do it right the first time, where are going to get it the second time. Keep the workmanship high it's great.

[@daryllitke8133]

Hey, Dave. We bend lots of 1/4 inch plate in different shapes, as long as the bends are relatively parallel as yours seem to be. We build basic dies and use a 40 ton press. Obviously, in the case of your cross member, we'd start at the driver's side ( or vice versa), and make the bends in succession while feeding the plate through the press. It's basic and works well as long as you ensure the plate maintains perfect alignment with the die along the bend axis. Or you could farm it out to a shop. 🙂 As always, great work.

[@reesesman8821]

Man im a Euro guy but this build is way too cool mad respect

[@johnsmith-qz4bv]

looks great...nice work cant wait to see it in color..

[@Jhrivera621]

This thing is coming along beautifully. Awesome work, awesome content.

[@cheneydowd5176]

Glad you didn't rush into it !!! the thing is gonna be really awesome good work bro

[@vanbonds1]

This guy is just awesome!!! Love his work and explaining how to do it

[@josh3930]

Can’t wait to see her done!

[@georgef1176]

Hey JD the wagon looks amazing this is what FCA needs too build. Great job!

[@robc6469]

Can’t wait to see this beast finished!! Gonna be crazy

[@JUST_ONE_ID10T]

When you are done this will look like something that should be at sema

[@grandtheftautotune7715]

It will totally be inside at SEMA..

[@christopherandrews3862]

Fantastic work and dedication, bravo.

[@bigsexymuthashutyomouth2546]

As always, awesome work Dave! It's getting closer to our climax with every video that you put out. All of us are going to go nuts on the same day when it fired up and drives away!

[@yannfournier8649]

Awesome build. Keep up the good work.

[@DONDA8888]

Bro this build is so sick!!!

[@kevins.3573]

I thought this build was reaching the peak after the hatch was done. I forgot about the whole, Charger's don't come with AWD, thing.

[@lilchimpo]

Keep up the good work David I still can’t believe how far this has come

[@dlofton123]

Its called support material. Infill is the material inside the parameters of the object

[@paulhargreaves293]

Great build dave

[@keithwright7874]

Great job can’t wait to see the next video

[@cramstick]

I use Evercoat pinhole filler before primer. fills pinholes and some of the scratches. works great, wipe it on then wipe it off, work small areas.

[@kickit59]

Dave as always an amazing job on the Hellwagon! I am really looking forward to the next video!

[@ChristopherCognetta]

Amazing work Dave.

[@rodneybrown1696]

Amazing detail Dave, can’t wait to see some color but no rush, I want to see the second and third prime and sand and see how well it blocks out after that.

[@jimbranham3281]

Lots and lots of quality work needed for what you are after.

[@thomaskrakowiak6447]

Great work

[@blacksupersport8311]

Car is looking better and better with every video 👍

[@elrey327]

Can't wait to see the final beast all done

[@daddyowe6]

Oh man I can wait for this to be done 🤠👍🏾

[@LunarOutlawsGarage]

It is looking absolutely awesome man. I know i would like to own one like this great job

[@getlost692]

Looking nice Dave

[@limegarbage]

Seriously, how do you not have ten times this many subscribers?! This is the only channel I recommend to people these days. Something to look forward to for sure!

[@MrJinga27]

Sat working then a junkyard vid dropz....happy days!!

[@Felix-gm9im]

I've been waiting for this project to be finished for years, but it hasn't been years. It hasn't even been a full year. I'm surprised at how fast this is going. At this rate it'll be done next month

[@limegarbage]

I feel you, it feels like an eternity! I don’t have notifications turned on, so it’s always a happy surprise for the next upload.

[@CptGreenJeans]

Fantastic man

[@slimtimes.l.l.c4081]

She's coming together can't wait....✌🏾..

[@jamesdidomenico9864]

Dave is hands down the best . Dude you have to finish this hellwagon in dodge green with the trackhawk powder coated yellow brake calibers 💪

[@fraidykat]

Burnt Orange metallic flake, Royal Purple metalic flake, candy apple red metallic flake, deep blue metallic flake, white, black, baby blue, goldenrod, gray...tell me a color that would NOT look good on this car?????!!! Heck, bubblegum pink or magenta would each have their own signature style on this car!! www.dodgegarage.com/news/article/showcase/2019/03/high-impact-colors.html

[@stunnashawtylonance8547]

Awesome build love the content!!

[@charlesmarshall2697]

This is rapidly becoming my favorite channel on KZbin! I own a company that builds complicated large tower computer controlled ice vending machines. Dave builds things the way we do and I would love to have this car!

[@parmjitsingh2329]

Well done 👏

[@timothywilson3785]

I think you are doing a great job!!!

[@ceechubbyhands5908]

This is going to be epic . I can’t wait

[@JOESSECRETGARDEN85]

Good job man keep the magnum alive

[@ryanperry9472]

Honestly, I am not a fan of the Charger but this thing is going to be AMAZING! i have a feeling if Dodge actually sees your car in person when it is done they might make something like it. Amazing work man! This thing is going to be so freaking cool! Plus I love the paint color you picked out!

[@fraidykat]

No rush, Dave!!!!

[@brooklyn9400]

I'm so addicted to this build.

[@anthonychiodi9173]

Cant wait to see that beast of a machine done an out on the roads. Mopar or no car!! 🚀💪

[@alleybuilds5370]

keep up the work!

[@deanh7190]

I have always disliked sanding but somehow watching Dave do it so well is satisfying. Looking good!

[@LuisGomez-gd1oz]

This dude is so rad!!!!!

[@eddylorenzo5033]

Nice game changer 👏

[@seeksource]

Keep up the quality and take it to SEMA. Dave will get lots of new followers. This is a spectacular build. Enjoying it a lot.

[@evoxcain]

Your famous somebody wrote an article about your build pretty awesome.

[@HeavyTanker-vx4oq]

I personally think this would look amazing in B5 Blue

[@callmeslick860]

Having a job you love... building dreams cars... now that’s living 😎 and you should put this car in a movie 🎥 🍿

[@johncruz5473]

Great content

[@RazoE]

Hell yeah. Been waiting for this

[@williammotley5510]

Give LDI a call. They do laser cutting for us and they do an excellent job. They can also do simple bends like you need.

[@alrasdipalahuddin1617]

Let's all agree this is the fastest magnum

[@cheneydowd5176]

Challenger wagon!! Next time!

[@urdead2meboy]

we do things good bit different here we finish of the filler in 180 -240 then primer flat the primer with 320 then use the DA with soft pad to 500 and then paint and if there is any pin holes we use 3m acrylic stopper . but everyone is different ! looking good tho mr dave

[@Levitabis]

thats what i was saying, hes making so much extra work for himself with all this 80 grit sanding but im sure itll look good in the end

[@jamesjohnson4093]

You are going to have the sickest wagon around! Props to you Dave! Dodge missed the opportunity on this one.

[@Boxtruckin]

No he is not!!! I will!! Cause he’s gonna sell it to me when it’s done!!!

[@jaygreen7053]

I can’t wait to see her when she done ✅

[@KuroDensetsu]

Damn.. three coats of primer?! Trevor is going to be jealous!

[@JamesWilliams-cd1xu]

Incredible!...

[@shykesehart6217]

Very Nice

[@SalinkD]

I don't think you'll need those triangles in the transmission mount because I'm pretty sure that both sides of the mount will neutralize most of the forces. But since you designed it in solidworks see if you can set up finite element analysis to make sure. Sometimes adding metal just increases the weight a part has to support and doesn't do much for strength.

[@dreb8man]

Duh... Dave you are something like a genius. Nice. Real Nice.

[@punkinsgarageandpaint8299]

#Durablock should give you a complete set of blocks as much as you've used them and showed us how to use them and they should give you a complete set to give to a subscriber!

[@provousa2253]

The "Chagnum"

[@NME1.]

2022 Dodge come out with a Magnum Hellcat that is exactly like the one Dave is building.

[@bgee461]

Lol let's find a shiny spot on Josh's trunk 🙈. That said, Josh has exceptional taste in cars obv