BUILT THIS NEW HOT RC CAR KIT DIFFERENTLY | Tekno EB48 2.2

NEW TEKNO EB48 2.2s ARE IN STOCK! - alnk.to/a43POpk
Electronics I'm using in my ebuggy:
Speed Control - alnk.to/6mPVdys
Motor - alnk.to/aAO6L7K
Remote - alnk.to/faBOgkd
Servo (Trying out) - www.nitroprora...
My typical race servo - alnk.to/4XvRn01
Check out www.nitroprora...
Use coupon code "MSM15" to save 15%
My Race Vehicles:
Tekno NT48 2.0 (Nitro Truggy) - bit.ly/3teYj9r
Tekno ET48 2.0 (Etruggy)-
Tekno EB48 2.2 (Ebuggy) - alnk.to/a43POpk
Tekno SCT410 2.0 (4wd Short Course) - bit.ly/3Qi8J0O
Tekno NB48 2.2 (Nitro Buggy) - alnk.to/6TzY4ia
Tekno ET410 (10th Scale 4wd Truck) - bit.ly/2yAAHfG
Tekno EB410.2 (10th Scale 4wd Buggy) - bit.ly/2YIiFo6
Check out the RC Cars Doug is selling here: msmvlog.com/co...
Check out your local Traxxas retail for all the crazy deals.
Get the best RC cleaning products and pit gear here:
www.cowrc.com/ - Save 10% using coupon code "MSM"
The third round of MSM Spec Slash Racing Series is coming! - msmvlog.com/pa...
NEW Bead lock Style Thumb Steer Wheels for Traxxas radios
bit.ly/3HmyQ2O
Buy my RC Car Collection Here:
msmvlog.com/co...
NEW MSM Shirts Here - bit.ly/3zErba6
Get an RC Mystery Box every month! Subscribe to the RC Box Club here!
www.rcboxclub.com
Have questions? Want sneak peeks? Become a Patreon! Patreon spots are now available!
Patreon Page - / marksantamaria
Join the “MSM Drivers Meeting” community! bit.ly/35jlZuR
This video was shot on the following camera:
DJI Osmo Pocket 3 - amzn.to/4aB7T6r
My Newest RCs:
New Traxxas Bandit - alnk.to/4qLyXi
FMS Land Cruiser FJ40 - alnk.to/610n3qW
Team Associated SR10M RTR - alnk.to/gzVO6Dd
Traxxas Drag Slash - alnk.to/3J6sRLE
Losi 8ight-XE RTR - alnk.to/6mPOtEQ
Traxxas Stampede BL-2S - alnk.to/ge6dVOt
Team Associated DC10 - alnk.to/aLIIuGq
Traxxas 4tec Drift - alnk.to/cwSnxQm
Tekno NB48 2.2 - alnk.to/6TzY4ia
New Traxxas Xmaxx - alnk.to/74uHTTA
Arrma Mojave Grom - alnk.to/aANQO73
Arrma Kraton 4s - alnk.to/a43yKD8
Traxxas 1/16 Summit - alnk.to/7M9GbgC
Axial SCX10 III - alnk.to/28RoUWH
Traxxas Rustler BL-2S - alnk.to/gp0Ofek
New Traxxas Mudboss - alnk.to/eZGKoI3
Traxxas TRX4 Sport - alnk.to/eZGGgCz
Arrma Outcast 4S - alnk.to/gzVnOrV
Arrma Notorious 6s - alnk.to/90yLQTB
Arrma Typhon TLR Tuned - alnk.to/7qjVK1E
Traxxas Sledge - alnk.to/bisAdGC
Maverick Quantum2 Flux - alnk.to/fwqFVKz
Traxxas TRX4MT - alnk.to/6IFnaVy
Traxxas Rustler 4x4 VXL - alnk.to/7X4aTeD
Element Enduro12 Bushido - alnk.to/fwqB2DI
Element Enduro ZUUL IFS2 - alnk.to/bispv0M
Traxxas Stampede 4x4 VXL - alnk.to/9moeJLD
Typhon Grom - alnk.to/c07nPAa
Granite Grom - alnk.to/87YIfG1
Traxxas Maxx Slash - alnk.to/g3aKdSF
Element RC Enduro12 Ecto Here: bit.ly/3SZlhvC
Traxxas Rally VXL - alnk.to/5Q5AgR6
My Race Vehicles:
Tekno NT48 2.0 (Nitro Truggy) - bit.ly/3teYj9r
Tekno ET48 2.0 (Etruggy)-
Tekno EB48 2.1 (Ebuggy) - bit.ly/3qkHlBM
Tekno SCT410 2.0 (4wd Short Course) - bit.ly/3Qi8J0O
Tekno NB48 2.2 (Nitro Buggy) - alnk.to/6TzY4ia
Tekno ET410 (10th Scale 4wd Truck) - bit.ly/2yAAHfG
Tekno EB410.2 (10th Scale 4wd Buggy) - bit.ly/2YIiFo6
Favorite Tools:
Protek Drill Tips - bit.ly/324wX58
Protek Hex Drivers - bit.ly/3R6pDyW
Protek Nut Drivers - bit.ly/2NSjfLc
Compact Set (Basher tools) - bit.ly/2GhibQC
Dewalt Electric Screwdriver - amzn.to/3jGn3wI
Save money watching my vlog:
www.tonyscoffe... - My favorite race coffee Tony’s Carmelita 20% off with coupon code “marksantamaria”
rcbodyarmor.com/ - Save 10% with coupon code “MSM10”
www.macscdp.com/ - Save 20% on orders $25 or more “MSM20”
www.cowrc.com/ - Save 10% using coupon code "MSM"
Want to send me stuff to review or show off?
Mark Santa Maria
6710 Virginia Pkwy Ste 215 PMB 69
Mckinney TX 75071
Follow me on...
Patreon Page - / marksantamaria
Instagram - @themarksantamaria
Facebook - / themarksantamaria
KZbin - / marksantamaria
On The Tone Podcast - / onthetonerctt
DISCLOSURE: Links on this page are affiliate links, meaning, at no additional cost to you, I may earn a commission if you click through and make a purchase.
#rccar #msmvlog #rcvlog

[@Hungrybird474]

I use the 243 . Works good . Sometimes it needs a 2nd hit . I ve found all liquid loctite works best and is less messy when I let the loctite dry on the screws overnight . The blue waxy stuff in a screw up cylinder like the old glue sticks back in kindergarten days is what I’ve been using . I’ve only seen it online but it’s great because it’s ease of getting some on a driver tip , apply and keep going . Sweet build Mr. Santa Maria .

[@rf1686]

Great video of the build and it looks like a sweet running buggy. I am racing the EB48 2.1 and it’s a great car, have already purchased all the parts for the 2.2 conversion to install after this racing season ends next month

[@christianrambissoon1141]

I use Dynatex anaerobic medium strength thread lock (made in usa)

[@robertkouns3078]

I prefer the orange thread lock. stronger than the blue, but not as strong as red.

[@LeeHenson-d8q]

Loctite 222 is very good it is design for hand tool removal.

[@therealcletusrc]

Can you make a video on some 4-tec on road racing? A lot of people don’t like it but I’m all about it. Thank you sir! Much love from Houston 🤘🏼

[@Midwest-RC]

243 for the win.. been using it for years for all my Rc stuff helicopters definitely

[@Dysl3xicDog]

Great build nice to see they have wiring channels to keep things where they should be.

[@Hated_Sien]

I have used 243 a couple times, and i still think its better to brake clean the screws. The last thing i want is for a screw to come undone in the A-main because i didnt take a few extra minutes to clean the screws. Also, there is Green, blue, Red, Purple and orange loctite.

[@joshaiken747]

Hey mark, if you put on yellow wheels, it will go faster. 😮

[@JamesBond-hz2tn]

1 sweet e buggy👍👍

[@hobokid907]

Try out the new ryobi electric screwdriver. It’s way smaller than that dewalt and it has more than enough power. I love mine

[@braxtonthebeast4384]

Love the racing content! Buggy looks dialed!

[@jrtate1123]

We use this loctite we use on our firearms because it’s so good on screws with oil and grease, plus the heat.

[@matthewrowley2157]

Do not use the green locktight stuff...you will strip threads with it......mega strong stuff.....the blue stuff is great!

[@rmarkley79]

Thank you MSM, just sat down for lunch and this popped up front and center. Looking forward to the Loctite update after some use. I've noticed numbers before, but never took them into account, haha.

[@gamedogrc]

Great Build MSM. That thing is pretty loud.

[@franciscovazquez4589]

The new Tekno buggy looks 🔥🔥🔥.. I see Adam Drake uses 50-50 loctite mix in his videos

[@GreatLakesRC]

I use Orange locktite for motor mounts and grub screws.

[@shawnrichardson118]

Great build I really enjoyed watching it🤘✌️

[@p_hat]

i mix red and blue loctite in a bottle 50/50 like a lil mad scientist

[@alandinehart7431]

Damn bro that thing is awesome and quick

[@sydewayzmo3905]

I use the stick. It’s just cleaner. No mess.

[@robinkesterlives]

Same here. I kept blorping out the liquid all over the place, so the stick is my friend.

[@acecapone8086]

Hey Mark thanks for the great content!

[@wiiska6820]

243 is the best, been using it since the beginning of time. Oldest and best thread locker out. The original LOCTITE. Exactly like the channel lock brand. its the best out also.

[@bluegroovemodelsports9650]

New Tekno buggy looks great

[@Hungrybird474]

Yeah man . Looks like fun 👍

[@handymanhaynes]

Permatex Threadlocker Orange is high strength removable. Between red and blue.

[@chriscord6524]

We use a uv loctite, it has to be kept refrigerated until actual time of use. Also highly toxic, but the vacuum of space is not where you want loose screws

[@arthopfer]

I usually use the purple. It’s a step less than the blue.

[@rambo46r13]

Good Morning

[@bobbjorkner7140]

after watching your videos, i decided to either get a tekno sct410 or the losi TEN SCTE 3.0, but i think i might have a better experience with Tekno, seeing as the Losi TEN is no longer made. I had to use loctite when building process chillers, Blue is the medium, Red is strong, and Green is strongest. they also make a clear glue, similar to CA but designed for permanent, OEM use. it is also best to apply the loctite on the middle of the screw, and not in the hole, if it pools in the hole it is too much for it to form the thin layer needed for proper adhesion. Tor remove stubborn loctite from metal, heat the screw or workpiece and itll slide right out. I would say red is the best for metal parts and the blue is the best for plastic. make sure to shake the bottle, and it does go bad over time or in high ambient temp. Hope that helped!

[@SoundStream101]

What alot of people don't know is that Loctite actually has an expiration date. I don't know how accurate it is but I got and use the tubes in my toolbox that I've been using for 20 years now and it still works fine lol

[@BP-iz2lt]

been using it for 10+ yrs, shit works fine

[@HisXLNC]

I’ve never used the thread locker included with kits. I’ve always use the 243, even when building quadcopters.

[@shafiqjan1474]

Loctite makes at least green, red, blue and purple which is for small screws. Grainger probably sells more than most so I get mine there so it's fresh.

[@fc3sboy1]

There is blue red purple yellow orange green also high and low temp sealant for threads and that's just loctite themselves permatex also has most of the same colors too however don't get it twisted red is not always red same with all the colors. The number system is what you go by

[@shafiqjan1474]

Never seen yellow and orange, any idea on their applications?

[@fc3sboy1]

@shafiqjan1474 gm uses yellow on caliper bolts on the trucks. And is crazy strong. Orange has the same holding properties as red however I was engineered to not have to use heat to remove it. Infact for rc where red is required I would start using Orange and In the areas where blue just does t seem to cut it but red was too much use Orange. Green is often called metal glue as it will bond metals together like on brake parts or freeze plugs

[@shafiqjan1474]

@fc3sboy1 thanks, the differences in grades are gap filling properties and then there are formulas for differing conditions of use from what I understand now. Uses are great for reference. Now I wonder what Ford uses on my F-150. I had a mountain bike job that asked for green and I got away with red and good because I had it and didn't want to buy some for 1 application.

[@iangriffiths9943]

We use green loctite, if you never want to remove the part again, it's I think only available to industrial applications in the engineering and automotive industry, we glue a coin to concentrate with it and the coin wore out from the forklifts driving up and down the loading bay over it ,in 8 months the coin was smooth and looked nothing like a coin anymore

[@lukewestwood5778]

Loctite 243 ftw, Use it at work all the time.

[@heller127]

You should be using the orange loc tight because that 243 blue stuff is pretty hard to take off on those small screws

[@chico5162]

I use it on my tractor at work it's some good stuff

[@bluegroovemodelsports9650]

Great video

[@Rc_cars5]

We got green loctite

[@ninthislandrc]

Loctite makes a few different 'colors' (purple, blue, and red)...and, for each color, there are a few different variants. And, that's not even including their retaining compounds (of which...yes...they have several). The thing is, in addition to Loctite, there are other companies producing threadlocker. For red & blue, Loctite is my favorite...but, the reason I mention "other companies" is for the following reason. One of those 'other' companies is Permatex...and, in addition to the usual purple, blue, and red, they also make orange. So, what's so great about Permatex's orange threadlocker? As everyone knows, blue (the preferred threadlocker for RC) has a very good 'hold' strength, with a somewhat-low 'release' strange. Below that is purple, which has a very-low 'hold' & 'release' strength (great for Mini-Z, and other 1/28 RCs...although, blue is also great for these). Then, above bout is red, which not only has a very-high 'hold' & 'release' strength, but also requires a considerably amount of heat to release. Blue is perfect for metal-into-metal where one needs a good hold, but also where such parts might need to be disassembled/reassembled on a somewhat regular basis. A perfect example of where blue threadlocker is best used would be race vehicles. At the other end of the spectrum, red is perfect for metal-into-metal where one needs a super-strong hold, and expects such parts to never, or almost never need to be disassembled/reassembled. Perfect example for the use of red Fred locker would be speedrun vehicles. But, what about when there's metal-into-metal that falls somewhere's in between...where one needs a super-strong hold, but might also need to disassemble/reassemble on occasion? That's where orange red locker comes in. It has a 'hold' strength that is almost as strong as red, yet it has a 'release' strength that is only slightly higher than blue...and, best of all, it does not require any heat to release. When the holding strength of blue thread locker is "not enough", and the release strength of red is just way too difficult to deal with, orange threadlocker is your new "best friend".

[@douglasedmonds8372]

watching these kit builds is very intimidating when you have never owned one. looking like you almost need an engineering degree between the build and setup.

[@steven-vn9ui]

Key is to have the tools and time. Go slow and check before going to the next step. You can do it!

[@BP-iz2lt]

or youtube videos

[@ryanlsorrell1983]

I own Tekno eb48 2.0 and I could this kit with no instructions. The mugen kits too I can build with no instructions. When you race them you take them apart after every race just like a real race car.

[@dandorris8531]

Also green.

[@85klstewart]

Got that nitro finger 😊

[@douglasperry1226]

Dude you look like Gomez from Addams Familia! 😂

[@bryanhamby6287]

I use that lock tight on all my stuff

[@fossfamilyrc8066]

Loctite 243 is what we use in industrial stuff at factories

[@mangler.m4950]

i use 243 on everything. 17 rc cars including a mostly metal crawler. the only screws that ever come out are the ones i missed.

[@itzjoeylo4501]

I use LocTite 242 without failure for many years, and I don’t clean anything. But you’ll need heat to release after 24 hours cure time.

[@Traveler0069]

Best loctite ever

[@endosrc]

not knocking the car, but 1/8th scale cars, especially truggies, look kinda goofy with the thinner turnbuckles.

[@fossfamilyrc8066]

Try 1.5 to 2.0 camber in the front

[@RoccoDoucette]

How did you get your kit so early! I pre-ordered mine!

[@fossfamilyrc8066]

That's what I use I have multiple bottles of it never had it come off

[@MrBonger88]

Blue Locktite in a red bottle. I’m a little confused lol

[@BrianPluff]

Hey Mark, what charger are you using these days?

[@jasonwalden271]

Hey, are we racing wednesday night ?

[@Jr77793]

Where can I get the cover for the rc

[@johnmiller4553]

NICE EB. HEY MARK WHAT HOBBYWING ESC ARE YOU USING ?? LMK THANKS 🤙🤙🤙🤙🤙

[@MarkSantaMaria]

@@johnmiller4553 hobbywing XR8 sct… its discontinued. The update one i put a link in the description.

[@johnmiller4553]

@@MarkSantaMaria Thank You Sir🤙🤙🤙

[@toolbaggers]

There's much much more Loctite than that. Many different "blue" alone. Go by the numbers not the colors. Look at their industrial catalogue.

[@RTmadnesstoo]

All I know is life is too short to mess around with crappy thread sealer. If it's thin and makes a mess or if it smells funny, trash it. Skip that waxy stick stuff. The Locktite Brand will not do you wrong. The German stuff is Dangerous. If you're Serious about if working Clean Everything. On Instrumentation and Precision stuff get everything Perfect then hit all the fasteners and adjustments with green and it will be there when you come back next year. Unless 'somebody' has been messing with it, then you look for scalps.

[@jeffbryner5355]

Idk why you are still messing with tekno. You know the bandit with its new upgrades is way better lol

[@BAYRAKTAR_MAN]

LMAOOO

[@jeffbryner5355]

@@BAYRAKTAR_MAN 🤣🤣🤣

[@MarcelGalang-zc4dw]

Time for a haircut bud

[@tylerandersenandthegang]

Apparently its also time for you to post a weird comment...

[@handymanhaynes]

​@tylerandersenandthegang tbh your comment is a little more weird..

[@maltesrc]

Worst motor