How To Install Innovited Relay Wiring Harness and HID Kit

[@rain7096]

👍

[@hmongkieyaaj1491]

I bought the 55w Innovative hid kit with relay from Amazon. Do I still need the error free adapter cable?

[@BulletSolano]

No you don’t need it

[@osidecoqui]

Does the connection work with the H4 factory harness from car. I'm trying to convert from H4 to H1 so I can use the retrofit headlight projector

[@BulletSolano]

+osidecoqui yes you shouldn’t have any problems because in my accord I use h1 with the retrofit projectors

[@salomonalvarez1364]

I would also like to know why the LED fog lights won't turn on with the low beam HID'S. I think there isn't enough power to allow the fog lights to turn on. Do you think a relay harness for the HID's will allow the LED fog lights to turn? The vehicle is a 2009 Dodge Ram 1500 and it has the 55 watt HID kit in the low beams and LED bulbs in the fogs.

[@BulletSolano]

Try the relay harness but I’m not guaranteed that is going to work, but I’m 80% sure that is going to work

[@justmylife4421]

I just installed a set of hi lo combo and when I put the headlights on low beams, they come on highbeams and when I pull the lever to put highbeams on, they go to the low beams. I don’t understand why.

[@BulletSolano]

Sounds like you put the connectors backwards

[@salehaldwais668]

i did exactly as you i turned it on it work and then in put it inside the light and i turned it on it didn't work? any advice?

[@BulletSolano]

Check your fuse

[@Junior-ir6xl]

I can’t find that type of harness for my 2020 kia sportage. I need that exact harness what is it call and where is the best place to get it

[@BulletSolano]

You can fine a wire harness anywhere online just look for the type of connector you’re lights has

[@arisk.ramosbautista1283]

The best ✅, I sell a lot innovited ballast here in Massachusetts

[@Skull0023]

Hi sir i install hids on my foglamp but my fuse blown. Do i need relay harness?

[@BulletSolano]

Hi, yes

[@Skull0023]

@@BulletSolano thank you sir

[@tek_soup]

i order 2 Wire Harness kits, because i have BI-HID setup, 4 Bulbs total, or did i just need One?

[@BulletSolano]

If you running HID’s on both that’s ok

[@hooman3402]

Where do I connect the wire of lens projector?

[@BulletSolano]

You talking about the stuck connector? That one goes to the wire harness!! Follow the video

[@hooman3402]

@@BulletSolano not that one, the wires of lens the that's operating solenoid in lens.

[@BulletSolano]

I don’t think my car has that wire I didn’t remove any wire from the solenoid

[@hooman3402]

@@BulletSolano ohh okay anyways thanks for the reply

[@tek_soup]

old video, but thank you!

[@earlcruickshank2449]

I bought a fog light kit for my car and it came with a harness. Can I use that harness instead of re-wiring the car with the HID harness?....can I just plug my bulbs and ballast into the current harness I have in my fog lights?

[@BulletSolano]

If you have a harness already I don’t see why not

[@earlcruickshank2449]

Thanks

[@BulletSolano]

No problem

[@rudylira2928]

Nice how do they perform at night? And how long did they last and would u recommend this his kit

[@BulletSolano]

Really bright at night and I still have the wire harness, I do recommend it

[@rudylira2928]

@@BulletSolano thanks

[@BulletSolano]

No problem

[@wildncrazyguytv]

How long did they end up lasting for you? I just installed them this morning. Thank you!

[@jdlr4511]

@@wildncrazyguytv how are they are they bright?

[@mikeyng98]

Is the harness suitable for both h11 and 9006?

[@BulletSolano]

Only h11

[@bobdadruma]

I wouldn't be able to sleep at night if I did a wiring hack job like that.

[@nathanrspain]

Can you recommend an HID or LED kit for my 2001 Honda Accord LX?

[@BulletSolano]

+Nathan Spain no problem the one I’m using in this video it really good I just pay $48.99 on Amazon and I believe for your low beams you need 9005, and I recommend this kit because is no flickering, the color is solid

[@BulletSolano]

+Nathan Spain Zdatt 12000LM Super Bright 100W HB4 9006 LED Headlight Bulbs 360 Degree Low Beam Fog Light Bulbs Conversion Kits Car Driving Lamps Replacement-Amber(3000K) /White(6000K) /Blue(8000K)-2 Yr Warranty www.amazon.com/dp/B01M70NGNJ/ref=cm_sw_r_cp_api_DFw6zbWQK3M08

[@BulletSolano]

+Nathan Spain Zdatt 12000LM 9005 H10 HB3 LED HeadLight Bulbs Conversion Kit 100W Full Lights High Beam 360 Degree Lighting for Car Lamp Replacement-Amber(3000K)/Whi www.amazon.com/dp/B01JS7L4R8/ref=cm_sw_r_cp_apip_GuQ7BFgJNjwtk

[@BulletSolano]

+Nathan Spain that’s the led kit if you lookin for hid’s let me know

[@nathanrspain]

Bullet Solano Thank you!!!

[@ice7900]

hi to install HID WITH BALLAST FOR TOYOTA RAV4 2016 it is better to install with wiring harness the not need wiring harness

[@BulletSolano]

Is better but in my case I have wire harness on my accord for more than 3 year with no problems but right now I have HID’s on the rav4 with no wire harness and no problems, is up to you if you want to do it!!

[@BulletSolano]

Ok try those

[@ice7900]

Bullet Solano yes I will try, I would like to buy a good ballast 55W / 35 W for another car TOYOTA Corolla 2009 please you can send me a link to buy thank you

[@BulletSolano]

Ok I’ll send you that one later

[@ice7900]

Bullet Solano thank you

[@arisk.ramosbautista1283]

🤔🤔🤔🤔🤔…..😂😂😂 why you took the bumper out for that installation, I don’t work that way ….but I respect that

[@ifyoueverwondered875]

The lenses cannot be removed without removing bumper

[@BulletSolano]

If you watch the entire video you know what I was doing, that other dumb comment is from brainless people, that’s why I didn’t even have to answer nonsense 😂😂

[@Matthew-ib8bm]

I have the same kit with no relay cable do I need one?

[@BulletSolano]

Yes

[@Matthew-ib8bm]

@@BulletSolanook thank you I appreciate it