That Standard engine always surprised me just how simple it really was. Honestly, it's really quite genius that they were able to simplify it so much. It's almost like they knew blokes in shed would be pulling it apart 70 years later....
@BundyBearsShed4 жыл бұрын
Everything was far simpler back then even engines.
@LordIronFoot3 жыл бұрын
I love the "I've use up my quota of swear words and It's only 7 o clock" haha fantastic.
@BundyBearsShed3 жыл бұрын
lol.
@motorv8N4 жыл бұрын
Fabulous session, Lance - thank you very much! The governor on my TEA has always been an intimidating bit of kit for me. Very glad you are going to delve into the dark arts of a reset 👍
@BundyBearsShed4 жыл бұрын
Glad it was helpful!
@tomroskell4034 жыл бұрын
I absolutely agree adjusting the governor seems a dark art to me . Something I've struggled with. Watching with great interest 😁
@Tod_Unctious4 жыл бұрын
Very good video as always Lance. I am so loving this little TEA20 series. 👍👍👍👍👍
@BundyBearsShed4 жыл бұрын
Glad to hear it!
@kiwifirey73474 жыл бұрын
Just bought a Fergie28 and in researching what to keep an eye out for I stumbled across your channel. Whether it will be of use to me or not isn't even the point, just a fascinating watch and your narration is terrific. Some rainy days will be spent going through your back catalogue. Good on ya mate.
@BundyBearsShed4 жыл бұрын
Welcome aboard!
@daveryder82754 жыл бұрын
Good on ya Lance , I didn`t know either about the oil slot at the end of the camshaft either , great job Lance
@BundyBearsShed4 жыл бұрын
Thanks 👍
@charleshart69924 жыл бұрын
Another excellent instalment!
@BundyBearsShed4 жыл бұрын
Glad you enjoyed it
@michaelguckian53732 жыл бұрын
Great video, couldn't enjoy it more unless I was sitting down beside yea. Ta mate.
@BundyBearsShed2 жыл бұрын
Glad you enjoyed it
@grantwtk4 жыл бұрын
Hi Lance, what is the name of the birds we are often hearing in the background? It seems like its usually one species of tropical bird.
@BundyBearsShed4 жыл бұрын
Kookaburra
@tonydoggett76274 жыл бұрын
Yes! Over tightening the fan belt destroys the rear bush in the generators. The Bosch VW beetle generators, with the ball bearings front and back, last forever!
@BundyBearsShed4 жыл бұрын
I wonder if that is where they got the idea from.
@richardburgers89652 жыл бұрын
I have learned a lot thanks for sharing your knowledge. I feel empowered to do the same. Are the sprockets and chain same as in the TED20?
@BundyBearsShed2 жыл бұрын
Yes they are
@johnkinnane5474 жыл бұрын
That "slit" in the crank shaft seems a bit "Mickey mouse doesn't it Lance, I suppose it works well so they went with it. Good video Lance looking forward to the next one......regards John, it was good Sparex are backing it
@BundyBearsShed4 жыл бұрын
Thanks 👍
@vehicle_entrance4 жыл бұрын
great video as usual Lance. Should there be any movement in the governor weights? except for the obvious swinging. stay safe
@BundyBearsShed4 жыл бұрын
Yes there is always a little.
@markandermann31073 ай бұрын
hi, where can i buy 15240A Pin, brass TO-20 Ferguson?
@BundyBearsShed3 ай бұрын
Im not sure with a TO Ferguson as we didnt have the TO's over here.
@ryno85474 жыл бұрын
Hi lance can you tell if a te20 cylinder head is a tvo or straight petrol just by looking at it I have bought a engine in pieces and the old boy said it was straight petrol and his lad said the block was straight petrol and head was tvo can you help
@BundyBearsShed4 жыл бұрын
There is a way but Im just not sure myself.
@johnrawlings88503 жыл бұрын
Why didn't you film taking the front end off I'm having difficulty doing that?
@BundyBearsShed3 жыл бұрын
It is only 6 bolts to undo so I didnt think it was good viewing.
@ahuman68254 жыл бұрын
What happened to the timing chain tensioner? I thought they had one or did I miss something?
@ShainAndrews4 жыл бұрын
Rare for any vintage engine to have one.
@BundyBearsShed4 жыл бұрын
The diesels have one but not the petrol or petrol kero.
@BundyBearsShed4 жыл бұрын
Diesels only with the Standard Motor Company engines.
@markorlando48174 жыл бұрын
My tractor has the same distributor in it. I wonder what car it’s out of?
@BundyBearsShed4 жыл бұрын
Probably a Morris I was thinking.
@TigerUNC524 жыл бұрын
Hey Lance. Really enjoying this series. Wanted to let you know that this video is in the Fergie rebuild playlist twice.
@BundyBearsShed4 жыл бұрын
.
@MikeR-dc8bi Жыл бұрын
Can you remove the cam without removing the head?
@BundyBearsShed Жыл бұрын
No
@MikeR-dc8bi Жыл бұрын
@@BundyBearsShed how come? Valves?
@danstevens22042 жыл бұрын
How they dusted an oil bath engine is beyond me. I had a timing chain break due to broken governor weights on an mf35. There was no “blow up” or valve damage.
@BundyBearsShed2 жыл бұрын
You got a bit lucky, good work.
@scottleininger24042 жыл бұрын
Awesome
@BundyBearsShed2 жыл бұрын
Thanks
@renederaideux81424 жыл бұрын
Hi, greatings from Belgium... the first viewer for today
@BundyBearsShed4 жыл бұрын
Morning! The winner!, lol
@AaronEngineering4 жыл бұрын
Jesus, that timing chain, gears and governor is worn out. I didn’t know that the the weights attached there 👍
@BundyBearsShed4 жыл бұрын
Shes 70 years old so I suppose we should expect a bit of wear.
@DCT_Aaron_Engineering4 жыл бұрын
@@BundyBearsShed Yes I'd be worn out after that amount of time also Lance. Cheers, Aaron (PS: this is my other channel).