Have you had any challenges making a child trailer work with an ebike? Share your solution below! Support Ebike Escape when purchasing a Burley: bit.ly/3wqlwS1 (affiliate link)
@karlawalker68583 жыл бұрын
Left you a little question below
@debbiebernhardt5406 Жыл бұрын
I had trouble with the mm of the hitch being too small(compatible issues related to securing to rear wheel) I am trying to find parts to help it attach to my cargo Ebike for more room transporting.
@hivetyrant73 жыл бұрын
Dang, the timing on this is perfect, I am about to buy my first ebike (Ride1up LMT) and only convinced the wife on the condition that we'd get a trailer and take our son with us! I will be using the code ASAP and appreciate the video!
@EbikeEscape3 жыл бұрын
Not sure how I missed responding but glad it was helpful. Appreciate the support.
@debbiebernhardt5406 Жыл бұрын
Here an important detail, mm of hole affects compatibility. 12.2mm is not enough for oversized cargo bikes.
@Altema223 жыл бұрын
Excellent video, and both of you did a great job! I use a trailer on my RadMini, and the only modification needed was substituting the left axle nut with a nut that did not have the wide flange on it (plus a flat washer). No problems at all, and the handling has been excellent.
@EbikeEscape3 жыл бұрын
Wow, that makes it easy! What trailer do you have?
@Altema223 жыл бұрын
@@EbikeEscape - Sorry it took so long to get back with you! The trailer is in a shed in the corner of our yard, and I didn't have an opportunity to go out there until last night! The trailer is the Instep double trailer with the stroller conversion option. It was about $200 USD if I recall correctly. No suspension, but it seems to ride nice enough for the kids to fall asleep.
@ignacioaranda22012 жыл бұрын
@Altema22 I have a Radmission1, and considered going the non-flanged nut and washer route. Can you confirm that the non-flanged nut is fully engaged, and that the rear axle bolt fully goes through the nut? Thanks a ton @ebike Escape - thanks a ton for the whole section regarding the attachment and the link to the adapter. I almost bought a burley adapter before concluding none of them would probably work. This has been the most helpful video and thread of my rad bike trailer adventure.
@wesvill75653 жыл бұрын
Looks like I'm your 5,000th subscriber. Had to join because I'm interested in purchasing an ebike next year to pull my trailer. BTW congratulations on your up and coming new baby!
@EbikeEscape3 жыл бұрын
Welcome aboard! Thanks for your comment and subscribing. We are super excited for #2!
@bryrusmi4001 Жыл бұрын
I think the nut extender is pretty common fair in a hardware store. They won't have a threaded bolt on the end but I think the elongated nut is pretty common enough to find. All you would need at that point is instead of a specialty end is just a short bolt of the right thread. Granted you are increasing the chances of losing a peace since it's two pieces instead of one.
@matthewalonso1147 Жыл бұрын
Hope all is going well with your Burley and Ebike. Make sure you are careful when turning. At speed you can tip it, likely not meant to be paired with ebike. I’ve tipped it on my standard bike with the single seater. My daughter still enjoys riding in it though.
@catspaw38153 жыл бұрын
Nice unit. Thanks Ryan and Allie
@EbikeEscape3 жыл бұрын
Thanks for watching!
@LittleEye7132 жыл бұрын
Thank you without this adapter I can not use a pet trailer. I was very upset without a solution until I found you ..Thank you again Good luck God Bless
@EbikeEscape2 жыл бұрын
Glad I could help!
@sabugdalantx2 жыл бұрын
Thanks for this video; I will try this out when our new bikes arrive.
@EbikeEscape2 жыл бұрын
Great! Hope it works for you.
@danhackett41993 жыл бұрын
Thank you for sharing
@EbikeEscape3 жыл бұрын
Thanks for watching!
@davidlittlefield2483 Жыл бұрын
My ebike has a QS205 hub motor with a much larger diameter axle than most ebikes. I determined the exact size and thread count of the hub motor axle, which turned out to be a very uncommon size in North America. After a lengthy online search, I found only one supplier in China, who had the correct size adapter nut in stock. The price for one stainless steel adapter nut was $90 including shipping. YIKES! The trailer manufacturer cut the large adapter nut in half and welded a smaller bolt ($6) to the outer end of the adapter nut to connect the trailer hitch mount. The cutting of the adapter nut and welding cost $40. Total cost to attach hitch mount was $140. I used thread locker on the ebike hub motor axle threads to ensure the fabricated adapter nut doesn't vibrate loose. After more than 3,000 km, the fabricated adapter nut is still secure and works perfectly for hauling my precious cargo. Thank you for your helpful and informative video, which helped me to figure out a solution for attaching my trailer hitch to an oversized ebike axle. Congratulations on your new baby!
@EbikeEscape Жыл бұрын
That is quite the endeavor you undertook. Glad we were able motivate you along the way.
@deepinspired4 ай бұрын
Very few if any videos on trailers on rear hub motors, thanks!
@EbikeEscape4 ай бұрын
You bet!
@mrmagoo99013 жыл бұрын
My ebike rear tire bolt has wires running through it. Hopefully it can be adapted somewhere to the frame. Thanks.
@EbikeEscape3 жыл бұрын
Ah, yes I've seen that a few times. Good luck getting it sorted! If you think of it let me know what you end up doing.
@Altema223 жыл бұрын
Most e-bikes have the wire on the right side, but if yours is different, you may be able to have the trailer adapter slotted so it can go on without removing the nut. It depends on the material of the adapter though. If it is forged steel, it will be strong enough. If it is cast metal, then I would look for a different solution.
@mrmagoo99013 жыл бұрын
@Altema22... thanks, I'm going to check that out.
@gisella1350 Жыл бұрын
Thank you, you are both a god send.
@EbikeEscape Жыл бұрын
Our pleasure!
@Jihadova2 жыл бұрын
You know if this works with Jeston Adventure ebike? The company couldn't point me to a compatabile trailer. Appreciate the help
@EbikeEscape2 жыл бұрын
You'd have to know what their rear axle threads are and even then this is one of those "do at your own risk" type situations.
@Viperar2 ай бұрын
@jihadova did you end up trying this with your Adventure ebike? Curious if this worked for you?
@user-yn6gi8fg8y4 ай бұрын
Will I need any of this on a rad 6 plus? I didn’t get the bike yet it’s on the way. Trying to take my dogs to the doggie park.
@chinolovesjesus2 жыл бұрын
if you have a rad power wagon go with a different universal outfit for the trailer. no diss to my guy here I biygtn the adapter and it didnt work with an aesome trailer. it may be different with everyone else but the issue here is the threads did not match at all with nutt or thread in wheel
@gildardomagallon2 жыл бұрын
Great review lots of good commentary
@EbikeEscape2 жыл бұрын
Thanks for watching and commenting!
@Brad-993 жыл бұрын
I tip around on my fat Tire ebike using the burly flat bed and so far ok after a year .if it goes i will get a mid drive motor ebike 😜
@EbikeEscape3 жыл бұрын
Good plan!
@stevegalas25568 ай бұрын
Do you know if the adapter will work on an Aventon?
@EbikeEscape8 ай бұрын
Depends on the threads. Probably need to confirm with Aventon or the FB group.
@lukegraham5582 жыл бұрын
What size was your axle? It looks identical to mine, however I measured it and its only 10mm, does that mean you need a 12mm female end? Or the same size.
@matthewwerme37732 жыл бұрын
I can't find an adapter anywhere.
@DavidBalderjr2 ай бұрын
Anybody connect this with an Electric Ebike yet?
@mm4259 Жыл бұрын
Thanks for the video! I ordered the adapter with the link you shared but I’m having trouble figuring out the size of the nut needed, can you share what size you got to finalize the attachment?
@EbikeEscape Жыл бұрын
If you ordered the adapter from the link, you will need a m12x1.75 nut to attach the trailer bracket.
@thatdudeingray4546 Жыл бұрын
What’s the load capacity
@zacharyjohnson65472 жыл бұрын
I think the adapter will work on my runner plus, did you happen to have problems with the adapter becoming loose on the axle or did it stay snug without maintenance?
@EbikeEscape2 жыл бұрын
Stayed snug in our experience but since this isn't an approved accessory you will want to do safety checks. Your experience may differ from ours.
@squatchbooshman6302 жыл бұрын
What size ebike is that
@runnerdm63 жыл бұрын
Does that adapter work with the rideal?
@EbikeEscape3 жыл бұрын
It sure does, have used it several times!
@tatoweb2 жыл бұрын
Hi. I've seen the Burley Bee and HoneyBee seat sags because kids are seated on a layer of fabric. Does this one has more support or it sags also?
@EbikeEscape2 жыл бұрын
I personally haven't noticed any sagging though my kiddos are pretty small at the moment. Feels very solid by the seats.
@Line7Charlie2 жыл бұрын
This model has a bench seat so no sag. That’s one of the reason this model is more expensive.
@lukegraham5582 жыл бұрын
Do you have any knowledge about compatibility the the thule chariot trailers? Will this adapter have a similar use?
@EbikeEscape2 жыл бұрын
You should be able to. The Thule trailer hooks up in a similar fashion, so you would be able to use this adapter or one very similar. Thule actually sells “Thru Axle adapters” that serve a similar purpose as the adapter we showed off, does. -JT
@lukegraham5582 жыл бұрын
@@EbikeEscape thanks for your reply. I have seen their adopters, although it looks like you have to replace the entire axel, unless I'm mistaken? My back axel is connected to a PAS sensor, so I have no idea how to take the axel out. Can you have a look at the ebike I'm referring to? It's called legend e bike siena is the model.
@karlawalker68583 жыл бұрын
Okay so my problem is that the black piece is not wide enough to fit on the bolt of the rad runner e bike we just bought. If I get the bolt you are recommending does the black piece fit on the male piece ? Meaning is it narrower than the original bolt?
@EbikeEscape3 жыл бұрын
That seems odd. Both your axle and the bolt should be 12mm. Unless for some reason the Runner has a wider axle? Are you certain you have the same black hitch?
@karlawalker68583 жыл бұрын
@@EbikeEscape My hitch is different. It’s for a Joovy bike trailer. After some digging and comparing specs on line it is smaller than your hitch. Man I don’t know what to do. It’s not like I can buy the bigger hitch mine is mire of a tube that fits inside a bigger tube
@benshumaker82092 жыл бұрын
@@karlawalker6858 this guy has that problem figured out: kzbin.info/www/bejne/e6mxgmR_eMeUbq8
@Zoubasurgical Жыл бұрын
I ordered the metal piece but were did you get the black attachment that connects to the burley
@EbikeEscape Жыл бұрын
The black part comes with the burley trailer. I think they sell replacements on their website and also you could get one on Amazon amzn.to/3NiHAd5 (affiliate link).
@Zoubasurgical Жыл бұрын
@Ebike Escape ok cool thanks alot my wife and I just got 2 500w serfas edash with mid motor i haven't tried the part yet but I believe 12mm is the new standard so fingers crossed it works
@EbikeEscape Жыл бұрын
No problem. If you have a mid-drive motor you may not need this adapter as you might have a standard quick release rear axle.
@Zoubasurgical Жыл бұрын
@Ebike Escape unfortunately I do not cause if I had the quick release I was just going to buy the extended axel but I don't
@maddielewis2357 Жыл бұрын
Fast foward about 12mins of this video....crikey!😳
@keithringer6662 жыл бұрын
I am planning on installing the hitch adapter on a Magicycle ebike, would you happen to know if the adapter will work with a Magicycle ebike?
@EbikeEscape2 жыл бұрын
Whether the stock adapter from Burley fits is going to depend on the length of the axle. If it doesn't then the machined piece might work if the threads are correct.
@manFromPeterborough2 жыл бұрын
@@EbikeEscape I don't see the purpose of the adapter, is it because the hole in the tow bracket is 10mm or is the 18mm flange nut on bike foul the trailer connector? I have a cheap trailer that has the 45 deg stud tow hitch and trailer has female canon connector, I had to drill the hitch to 12mm for it to fit ebike axle
@chinolovesjesus2 жыл бұрын
Will the adapter work with the rad wagon 4 the thread looks way bigger in back wheel
@EbikeEscape2 жыл бұрын
It should be the same thread - I haven't tried it on the RadWagon 4 yet. The challenge is the bit more unique frame to make sure there is clearance. Especially with ours since we have the running boards installed.
@adaly46492 жыл бұрын
@@EbikeEscape I'd love to see when you try it on the RadWagon 4 someday. We have one just got gifted a Burley Bee, and I'm trying to figure out how to make the geometry work with the running boards installed. I might have to take them off on the end, but I'm trying to avoid that if I can.
@drivestorage17793 жыл бұрын
oh I know! eBikes (most eBikes) do not allow for trailer hookup to the rear axles. And trailers, MOST trailers, hook up to the rear axles ... hahahhaha... there! I just outlined the common dilema of most parents trying to stay active by way of cycling. Well, of course, you could always get a burley travoy which hooks up to your seat post, and bunggie cord your child (don't forget their arms) onto the travy --> voila! you're off to a bike ride! hahhaha.... you guys will surely be turning some heads! hahaah... we are investing on a Bike Friday Folding Tandem bike, the twosday with a front hub motor which allows for the rear axle to attach to any trailer of our desires. And yes, the burley trailer is coming with us because (if you'd ever own one), it's a dream to turn it into a stroller which we use to grocery haul. Why burden your bike when you already have a beautiful trailer that can haul 100 lbs of weight right? The bike, we use to carry the people. We might one day get the Burley 1 Seat trailer in order to get thru most doors (hint hint, you never know when you bike by a starbucks and suddenly the "want" for a cup of coffee becomes a necessity). And boy! are those doors small for a bike trailer! haha!
@EbikeEscape3 жыл бұрын
Yes, frustrating indeed!
@kr6392 жыл бұрын
That hat is tripping me out. lol
@EbikeEscape2 жыл бұрын
My hat? Why?
@brandyk Жыл бұрын
This is good doesn't exactly work for my bike though but helpful to others. You may taje offense hopefully not n with full disclosure im in my 50s not sure why so many people feel it necessary to say personally frequently when its ckear. Sad that we live in a society where people are sooo careful. Unfortunately it spreads n when people don't say it they could be misunderstood by the younger generations. So much more was understood without having to say it not long ago. Like "in my opinion" when clearly that person's opinion. And the worst is "maybe...maybe not " hello maybe already implies that.