Busting RIVETS On Truck Frames Made Easy With THIS TOOL!

JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum!
Learn About The Program Here: • I’m Launching A PROJEC...
Join The Project Support Group Here: / membership
CP717 Air Hammer:
amzn.to/3LYG0u0
Offbrand "totally-not-a-clone" for about half as much:
amzn.to/3BQ9aGI
Chisel set that I use with mine:
amzn.to/3peqC2K
Yes, these are affiliate links, so the channel earns a small commission if you buy these items or anything else on Amazon after clicking them. Thank you!
MORE: For those who like the things which KZbin doesnt, join us on a free mobile app called Telegram, under "Tractor Hoarders Group Chat", in case we get cancelled on here, by following this link: t.me/TractorHo...
Also, check out our Patreon page to help support the channel: www.patreon.co...
SOME OF MY FAVORITE TOOLS:
The ULTIMATE Welding Slag Hammer, Made In USA:
amzn.to/2Z5HbjB
220 Volt Welding Extension Cord:
amzn.to/2CAxlP7
Cotton BSX Welding Jacket:
amzn.to/2VdGAuZ
KNIPEX German Made Pliers-Wrench:
amzn.to/35fchvN
OTC Slide-Hammer Kit:
amzn.to/3p7mq4Q
Carbide Burrs - An Affordable Set That’ll Last:
amzn.to/2VsxTgH
SUNGLASSES I WEAR - Quality at twice the price:
amzn.to/2VegmbE
Regular Safety Glasses that I Use:
amzn.to/2ATXtEf
My favorite rust removal tool:
amzn.to/3nxAfbK
Makita Metal Cutting Chopsaw:
amzn.to/3A6kVu1
Yes, these are affiliate links! Thank you.

[@officialweldingfarmingarch2041]

JOIN OUR EXCLUSIVE PROJECT SUPPORT GROUP With WEEKLY GROUP CALLS For Coaching On Farm Equipment Repair, Welding & Metal Fabrication! Its An Affordable, And Easy Skill-Building Program With Only A 1 Month Minimum! Learn About The Program Here: kzbin.info/www/bejne/gpPbqY1qoZ5_pLc Join The Project Support Group Here: www.patreon.com/OWFA/membership

[@fraserfab68]

Cut an x into the head of rivet with a cutoff wheel. Makes this much faster and saves your chisels.

[@mikeduhm5325]

As mentioned cut an X in the head. Get one of the rivit cutter chisel bits. It's sharpened like a wood chisel and has a small offset bend so it lays flush with the frame. If the rivits are long, going thru thick or multiple plates, drilling a hole will make them drive out much easier.

[@Matt-qh8lj]

Pro tip!! Cut a V into the chisel and then sharpen it you won’t have to fight with it trying to jump off each side while your hammering

[@StephenCox.]

Real men use a hand file and just file the heads off!

[@WilliamTMusil]

Hiya Lance

[@mattbowser5274]

Scarfing tip works really nice

[@adubbelde1]

I've got an old CP air hammer, probably 40 years old. Still works great. I cross cut the heads of the rivets with an angle grinder and cutoff wheel. They chisel off much easier

[@halfinchholes88]

Air-Arc carbon gouger makes clean swift work of them.

[@timkirkpatrick9155]

Rivets work harden. You can get or sharpen the chisel to a V . Yes they spread and break, but do stay put. Remember the anvil flatten and the springs lose their zing. Maybe time to rebuild.

[@jacmccauley7581]

Get yourself a quick change Chuck. Makes all the difference in the world.

[@ElvicFarms]

So happy to be watching this. Thank you

[@fredflintstone8048]

I've also used the sharpened chisel bit on my air hammer to cut off welds that are located in such a way where it wasn't feasible to get at them with a grinder.

[@zeke112964]

We used this method in the mid 1970's on ball joints....they were riveted to the control arms and the replacements were bolt in

[@Clawson_customs]

U should start doing new videos I absolutely love the old ones but I think I have seen most of them

[@foghornleghorn8536]

So if we just ignore the edits and the time lapse we should be impressed with the tool and the technique... Got it.

[@Tsilsby]

use a cut off wheel and cut an X pattern into the rivet then hit it with the air hammer. much easier

[@_P0tat07_]

You need a quick change chuck on your air hammer. You’ll kick yourself for not buying one sooner I promise 😂

[@haydenc2742]

make sure you put a drop or two of 3 in 1 oil on the input of the air chuck every start of use to blow oil thru the mechanism so it doesn't rust out Very cool! Keep em coming!!!!

[@johnpike9612]

If your assult hammer rusts then youre not using it enough to justify its purchase

[@danielbenson1133]

The quickest way to get them off is too heat them up with the torch then cut it with the air chisel

[@glenn9989]

That’s the way I used to do it I got the strongest air hammer snap on had and it came with a crescent shaped chisel … that was about 20 years ago still works too

[@yt66228]

You have to watch the Pakistani truck guys. They are experts at this. Also, they have safety sandles on.

[@blackbuttecruizr]

Air chisels are the best.

[@davemachoukas6175]

Thank you keep them coming. Enjoy your videos

[@kissmya325]

I missed the videos little brother.

[@nashguy207]

Great tip. Looks like it works well with a good air hammer.

[@johnpike9612]

Welcome to the world of assult hammers 😁👍 now you need to step into a quick attach chisel holder and you'll wonder why they came with the stupid spring to begin with.

[@workonitm8]

Chuck, if you grind that chisel into a shallow " U " shape it'll stay on the rivet a lot easier. Thanks for the video.

[@jtravieso13]

I want to watch the vídeo that you first put up, I started watching it this morning but it's private now

[@Gangstercub]

Wow you should get the nobel piece prize for that.

[@donanderson9269]

Just watching you do that makes my hands ache!

[@colt10mmsecurity68]

A faster way is to start with the chisel and create the initial groove in the rivet. But then switch to a Sawzall with a carbide bit metal blade (a long blade) into the groove you made, and it will cut the rivet head off like a champion really fast.

[@billwoehl3051]

Sharpening tip: keep the bit cool, don't wear gloves, hand will let you know when the heat builds up long before you get to ruin the temper, if it's to hot too handle, dip it in oil to cool it off. Usually quite often.

[@christianb5110]

Ive had luck cutting an "X" in the head of the rivet. My father in law has heated them up with a torch and knocked them clean through and replaced with grade 8 bolts. Different application and more of a rust repair. Wish every frame looked like a Texas truck lol

[@bobsmith9329]

Center drill them, makes it much easier to shear.

[@jwszewczyk]

We always have ground the head flush, center punched and drill spotted the "center" before using the pointed punch on the air hammer.

[@bubbapate5740]

I just use an angle grinder. 40 or 60 grit flapwheel. Sometimes I use the air chisel with punch or drift pin and hammer.

[@laughinghay1090]

A simple cheap grinder is so much faster

[@jameshanshaw516]

I agree a grinder and a punch is the way to go.

[@thapyro5536]

Get you a rivet buster, they may be 30 pounds but will do it faster

[@evankibbe590]

Hummmmm 😊👍🌎🌞 I have made many trailer's out of pickups !!! And that takes to long !!! But I'm very good with a torch!!!!

[@shanebiggers8437]

I use cut off wheel to put line or x on the head before sir hammering. Works way better to me

[@mfk12340]

Because I don't have as nice of an air hammer as yours. I have to do a little bit of a different method. I use a drill bit and just barely remove a little material. Not enough to even go through the head of the rivet. But it's just enough where my air hammer can then break off the head.

[@dmhipkins]

Awesome!

[@koerttijdens1234]

Dis is amazing

[@workonitm8]

Slowly rotating your air chisel 90 deg speeds up the cutting action.

[@mikerobi6100]

i need to get one of tool too have to do that too truck

[@thepubliceye]

You need to hook up with Treaver Bails hay farmer

[@oliver-ht1lv]

I miss the video of when you and steve did the unboxing

[@christopherleblanc9599]

should check out Pakistani truck repair , they know how to remove rivets

[@wayoutwest4944]

I am sure you have seen how the men on 'Pakistani Truck' take care of rivets?

[@jake-mv5oi]

Hand chisel & sledge?

[@wayoutwest4944]

@@jake-mv5oi Yes, sometimes the chisel holder just uses his hand, but on occasion they will use pliers.

[@lilreb601]

Get a “V” blade for your air hammer.

[@officialweldingfarmingarch2041]

CP717 Air Hammer: amzn.to/3LYG0u0 Offbrand "totally-not-a-clone" for about half as much: amzn.to/3BQ9aGI Chisel set that I use with mine: amzn.to/3peqC2K Yes, these are affiliate links, so the channel earns a small commission if you buy these items or anything else on Amazon after clicking them. Thank you! MORE: For those who like the things which KZbin doesnt, join us on a free mobile app called Telegram, under "Tractor Hoarders Group Chat", in case we get cancelled on here, by following this link: t.me/TractorHoardersGroupChat Also, check out our Patreon page to help support the channel: www.patreon.com/OWFA?fan_landing=true SOME OF MY FAVORITE TOOLS: The ULTIMATE Welding Slag Hammer, Made In USA: amzn.to/2Z5HbjB 220 Volt Welding Extension Cord: amzn.to/2CAxlP7 Cotton BSX Welding Jacket: amzn.to/2VdGAuZ KNIPEX German Made Pliers-Wrench: amzn.to/35fchvN OTC Slide-Hammer Kit: amzn.to/3p7mq4Q Carbide Burrs - An Affordable Set That’ll Last: amzn.to/2VsxTgH SUNGLASSES I WEAR - Quality at twice the price: amzn.to/2VegmbE Regular Safety Glasses that I Use: amzn.to/2ATXtEf My favorite rust removal tool: amzn.to/3nxAfbK Makita Metal Cutting Chopsaw: amzn.to/3A6kVu1 Yes, these are affiliate links! Thank you.

[@Luke3420]

Do you still use fronius welders?

[@Ratkill9000]

The air hammer, the one tool that I hate just because its noisy and someone has one going first thing in the morning.

[@JAKE3914]

I'm lost. . . if ya grind 'em flat; they're NOT in the way of future plating. ????

[@camojoe83]

That is definitely a way to remove a rivet. Not a first choice, or even like a 5th choice, but sometimes you gotta cut one in a stupid tiny space or somewhere you cant get a die grinder.... But... Why you wouldn't just grind em off out there in the wide open is absolutely beyond me.

[@ralphjaneheywood2565]

It is better if you attack it on the manufacturer (mush) head, speaking as a retired ship builder

[@DUSTEATER2]

My made in China chisels would not cut them in less then 1/2 hr at best.

[@MaxGiganteum]

Aaaaaannnnnndddd THAT is why you don't want to buy shite made in China! - Max Giganteum

[@daledurbin2354]

If it were Easy we've have Girls doing it.

[@DieselRamcharger]

Bro, you are holding the chisel backwards. the dog leg is to get your hand further away from the frame.... same old Chucky dumb as a rock.

[@jphickory522]

Grow up

[@Gangstercub]

Chucky........ how many channels you gonna have to get subs.....

[@OldAcres8690]

Everybody go home lol

[@johnburke7253]

Subtle you ain't. Hope you are wearing hearing protection, because if you ain't you will never hear your children's voices.