Bykski RTX 4080 ASUS TUF Water Block Thermals Installation Testing Undervolt Unbox Overclock PCB GPU

RTX 4080 ASUS TUF Bykski Water Block Thermals Testing Undervolt Unbox Overclock PCB GPU
00:01 Intro
00:29 Unboxing
02:05 Water Block Installation
03:48 Custom Loop Fill
04:16 Testing
05:11 [Chart] Core Temperature
05:21 [Chart] Memory Temperature
06:31 [Chart] Power
06:49 [Chart] FPS
07:10 Outro
Official Affiliate of FrozenCPU | www.frozencpu.com/VectorNetwork
Please like the video and subscribe the channel. Ring the bell for a notification when the next episode airs. This is the Vector Network.

[@hmcomputers1]

got a good video👌

[@vectornetwork]

Thanks for your comment 🙏Thanks for the encouragement and thanks for watching, I do appreciate it. 🙌

[@matheusmarim7844]

Excelent video, thx a lot to produce this type of content with Bykski products. Is pretty hard to find good videos about 40's series using these waterblocks. Keep It up!

[@vectornetwork]

Thank you for your comment 🙏I will absolutely to my best to keep it up. Thank you for the encouragement. I recognize it takes a lot of time and steps to produce a video but I am getting used to it and I have a bunch more videos on the way. I am working on a Heatkiller V Pro block for the 4090 FE. That episode should be out in 7-10 days and then I have two PC builds in the works. A 4080 in a SFF and a 4090 in a black EVO. Thanks again!

[@matheusmarim7844]

@@vectornetwork I'm looking forward to the next few episodes :) Keep going, your work is amazing for the community!

[@vectornetwork]

Please enjoy watching 🙏

[@whatuptechies6607]

Any way I can get this to Toronto Canada within 5-7 days instead of 45 days

[@vectornetwork]

@@whatuptechies6607 Thanks for the comment 🙏 I purchased this Bykski block from eBay. I found it from a seller that had several for sale and good feedback. It took a couple of weeks from purchase to arrival. Hope that helps

[@hordi1ful]

Excellent review!!

[@vectornetwork]

Thanks for your comment 🙏I hope to keep improving the videos and I am glad you watched, thank you!

[@aeon7748]

Did you only use the provided thermal pads and what were there the thickness on the different components?

[@MyJapaneseLife]

Did you use Fujipoly thermal pads? How many w/mK are they?

[@Muddy2366]

Hey man! Great video! I broke the original cooler's screws.. does the bykski kit come with these screws? (4 around gpu chip)

[@vectornetwork]

Thanks for your comment 🙏To clarify, you broke the screws that go around the processor for your original air cooler. The Bykski kit will come with new screws, 4 that go around the GPU chip. Hope that helps.

[@Muddy2366]

@@vectornetwork was a great help! Thanks for the reply

[@DreTube-ls4gw]

Is Bykski water blocks good quality n performance? And I'm so happy to look that you have alot of fittings :)

[@Wimpelmann]

No thermal pad´s for the mosfets???

[@Geniusinside2023]

So basically if i have the OC version liquid cooling is not worth it, Just keep original card as it is. Thank you for the video

[@alanpatrick7826]

Hello! Could you also show the GPU Hotspot temps? (Can be read from HWInfo or GPU-Z) on my card i'm gettin pretty high values and would like to compare results :). Thanks in advance!

[@vectornetwork]

Thanks for your comment🙏Hm, it is a balancing act. I am currently showing the GPU core and GPU memory. I have the data for GPU Hotspot. My only concern would be if adding another chart, that would likely be interesting only to a portion of the audience, would cause a dip in viewers. Or maybe I could incorporate it into another chart. It is something I am considering. Especially if I decide to make shorter episodes dedicated to Unboxing/Installations/Teardowns/Thermals, then I could add more content to each type. Something to consider and thank you for commenting.

[@mkatakm]

@@vectornetworkIt is enough to show a chart for only 10 seconds and that info is vital for me. Providing just core temp is not enough because, for example, my ASUS TUF 4080 OC card's core temp never exceeds 65 degrees celsius while hotspot temperature reaches 90 degrees under heavy load. There is something wrong with its cooler because I repasted GPU and nothing changed. I am considering water cooling but I also need hotspot temperature info.

[@daitran4909]

What is the reservoir you are using?

[@AlexandraB-ou8cz]

i want to ask something for rtx 4070 is any waterblock because i only find for 4080/4090

[@adityabaghel729]

I have gigabyte windforce 4070ti and I am not getting it's waterblock ,can you tell me what to do in this case, can I use any other brands compatible block since the screw placing and mosfet and vrm placing are almost same in many cards I can do some diy stuff to companciale the perfection of the block

[@vectornetwork]

Thanks for your comment 🙏 So you have a 4070ti Windforce. I would enjoy it air cooled. I have not done research on the 4070ti water blocks, so I am not sure about what water blocks are available. I do know that I would not recommend (in this situation) to try another brands block, even with your DIY skills. The 4070ti should be a cool and efficient card. I would recommend water cooling moreso for the 80/90 series cards. Hope that helps

[@adityabaghel729]

@@vectornetwork actually the problem is that I have barebone pcb of the gpu, that gpu was part of a liquid cooled cpu rig in a china based server providing company operating in india which closed their operations in india (my country) cuz of gov sanctions on Chinese companies so I got the pcb of 4070ti for just about 200$ but now I am struggling to use it I also didn't have it's io plate but I have made it by modding an scraped gt 210's io plate ......🙏