C10 Temperature Gauge

[@theeedragonseye]

Def helpful! Thnx!

[@danielhornos7255]

Thank you very much, greetings from Argentina

[@nursecuenca]

When I ground my temp sensor wire my gauge only moves a quarter. Even at high temp it never goes pass a quarter. Any suggestions?

[@ALADDIN9999]

Cypress hill !!

[@hannahalnas2589]

Hey what’s the bottom lug for ?

[@JustTrizIt]

Probably the light.

[@aladwanit]

Hi brother How do you connect the temp. gage with sensor on the engine?

[@losgarciasadventures1496]

ill try doing a video to show you pretty simple

[@aladwanit]

@@losgarciasadventures1496 thanks alot brother 👍

[@punguin554]

Did you do a post on stright wiring the rest of the gages

[@losgarciasadventures1496]

Still havent done it, but will be.

[@wilfredogarcia2528]

@@losgarciasadventures1496 Excellent video Robert!, you clarified a question I had about the connection of that sensor for my Chevy, it would be great if you made one for the oil pressure sensor

[@weman5390]

My guage stays on cold the whole time I even got a new temp sensor and it still stayed on cold

[@losgarciasadventures1496]

Sounds like the wire might not be sending correctly

[@weman5390]

So what should I do ?

[@noewolf4268]

1) Put a new sensor in If that doesn’t work 2) install new gauge If that doesn’t work 3) add new wire and do what he did, direct connection instead of terminal blocks on a board but be sure you use high temp rated wire. Good luck

[@noewolf4268]

@@weman5390I’d just do all three at one and be done with it.

[@ChauncyFatsack]

That's the oil gauge the water is behind the intake

[@gregraper2188]

Oil pressure is behind the intake and the water temp is between number 1 and 3 spark plugs in the head!!!

[@ChauncyFatsack]

@@gregraper2188 yes you are correct I don't know why I said that??? Must have been half a sleep! I just put new temp sensor on my 350 GMC 1973