C3 CORVETTE INTELLITRONIX GAUGES INSTALL

We install intellitronix gauges in a 1977.
*IF YOU OWN A 1978, JAMES BRADFIELD HAS A GREAT TYPED TUTORIAL ONLINE*
YOU WILL NEED:
-Phillips screwdriver
-Socket Set
-Pliers
-Crumpet
-wire snips
-zip ties
-conduit
-roll of black/red/white wire
-butt connectors (optional)
-electrical tape

[@escalade780]

good job ...I wired mine 5 years ago...

[@montereyf7692]

I did my 77 about 4 years ago it works fine bought the part at Mid-America

[@classiccorvetteguide9147]

Interesting!

[@k.wright3664]

Thanks for your help!

[@mw88keyz]

Can you share a sounrce for the T10 connectors that fit...I ordered some from amazon and they dont fit!!

[@msgtkevinpatnode5649]

Great video, What is the T10 connector for the dash lights and who sells them? Thanks

[@classiccorvetteguide9147]

eBay

[@xsclusivemomentz8167]

So on the original Harnes I have to create grounds for each one ? Then put the female connectors ? Just trying to clarify I don’t want to mess anything up

[@Josephine1977]

I had problems with the smoked piece sliding into the center bezel, the tabs keep it from seating properly. Still trying to figure this out…

[@sackbot1973]

Dremel the slots where it sits into, just widen them up a tiny bit

[@larrythomas3624]

I don’t understand using the printed circuit board?? Is it reinstalled and used or just a reference? It seems sketchy without using the center connector or the attachment points of all the old gauges. I must be missing something?!

[@lukeswanson6887]

The circuit board is screwed in place. If you look closely there holes for it to line up. It’s then clamped by the smoked plate.

[@garyschmitz7193]

Do you happen to have a picture of the wiring?

[@peachgoo4you244]

No never

[@martinbaer3772]

I bought a 1980 C3 lately, you mention at the beginning of the video: disconnecting the "mat light", can you tell me what the "mat light" is for?

[@msgtkevinpatnode5649]

It lights up the center cluster...

[@classiccorvetteguide9147]

Map* light

[@canzoman]

Can you post I link to this? *IF YOU OWN A 1978, JAMES BRADFIELD HAS A GREAT TYPED TUTORIAL ONLINE* I am not finding it.

[@sackbot1973]

Need more hand holding with connecting what wires where please I have no instruction manual, show the fuel gauge hook up for dummies please

[@peachgoo4you244]

Nope

[@elianamarley199]

What color did the purple dimmer go to Left turn and right signals The brake And high beam?

[@peachgoo4you244]

Not telling you sorry

[@josqe8760]

when you look at the instrument cluster do you see the electrical board of the mph and the rpms or is that just the video picking it up???

[@classiccorvetteguide9147]

You see it

[@josqe8760]

@@classiccorvetteguide9147 would you recommend buying it or not?

[@xsclusivemomentz8167]

Are you in Houston lol ? Good video though man

[@peachgoo4you244]

What ever you do. Don’t tell anyone how the purple wire hooks up. Bc it’s to important to mention

[@stevewheat9030]

Why?