Review of the Speed Engineering Header and Xpipe for a C5 Corvette. I erroneously said the corvette was a 2002, but in fact it's a 2000. Sorry about that
Пікірлер: 74
@spullibwd6 жыл бұрын
Love the aggressive sound!
@BadLuckGarage6 жыл бұрын
Sounds good brother! I almost bought a yellow one myself.
@FeedMeMoreVideos165 жыл бұрын
Nice! I’m also from Delaware about to install headers on mine this weekend.
@Rico_Suave-bk8le5 жыл бұрын
Sounds good man!!! All these yellow vettes looking good and sounding great!! @YellowvVette04
@302vettelife25 жыл бұрын
Thank you. Ive been very happy with the headers. And Corsa is just the best.
@kenporter48334 жыл бұрын
I have a 98 c5 and just order this exhaust set up. Do I need a later or dip stick?
@shawncoe37562 жыл бұрын
Is there any cabin drone with the Corsa on this setup? Asking for a concerned wife. I just ordered my set today.
@302vettelife22 жыл бұрын
Shawn, zero drone. I'm not going to lie, its noisy when you are on it, but nothing sounds as good as a corsa on the vettes, in my opinion.
@shawncoe37562 жыл бұрын
@@302vettelife2 awesome I put Corsa on every V8 I buy. Looking forward to it.
@302vettelife22 жыл бұрын
@@shawncoe3756 Awesome. Good luck my man.
@YellowVette046 жыл бұрын
Sounds great man. The way a corvette should sound.
@302vettelife26 жыл бұрын
Thanks man. Love your channel
@kenporter48335 жыл бұрын
How do they go In? From top or bottom and did you have to jack the motor up to install them?
@302vettelife25 жыл бұрын
They went in from the bottom. No, the engine did not need to be raised and the steering shaft did not need to be disconnected. I did remove the starter for added clearance.
@kenporter48335 жыл бұрын
@@302vettelife2 thank you very much
@302vettelife25 жыл бұрын
@@kenporter4833 You're welcome. Let's us know if you go with them and how you make out.
@PABLORL19895 жыл бұрын
Ls1 doesn't have egr? My 02 c5z does. That's what's delaying my decision on headers
@302vettelife25 жыл бұрын
No C5s had egr's. What are you talking about the AIR injection?
@jasonclement82055 жыл бұрын
How much did they charge for the weld if you don’t mind me asking
@302vettelife25 жыл бұрын
If I remember correctly, I think it was 90 bucks.
@jasonclement82055 жыл бұрын
302VetteLife thanks looks like what I’m going to be installing. Have you tuned it since?
@302vettelife25 жыл бұрын
@@jasonclement8205 not yet. I have a few more mods to do before I tune it. I was thinking about a mail order tune to get my by. Very happy with the exhaust though.
@mcm954034 жыл бұрын
No CEL problems without having cats? Any need for o2 sensor extensions?
@302vettelife24 жыл бұрын
Yes. You'll need to have the cats tuned out. No, I did not use extensions.
@SimplyJustRandomness4 жыл бұрын
You didnt need 02 extensions? Place told me ya do lol. Why not?
@302vettelife24 жыл бұрын
@@SimplyJustRandomness I had plenty of wire without using the extensions. You can use them if you want, but it's not necessary.
@thedriverscorner4 жыл бұрын
I need these on my build for sure!
@ericrichardson68994 жыл бұрын
with out the cats, have you noticed a fuel smell when you've had to stop at lights
@302vettelife24 жыл бұрын
Most definitely
@ericrichardson68994 жыл бұрын
@@302vettelife2 yeh I've heard that from others, I'm doing headers some time this summer and I think I'm going with the high flow cats. Thanks for getting back to me.
@chrisbrooks70005 жыл бұрын
What cat back are u running? Car sounds good
@302vettelife25 жыл бұрын
I have a Corsa Sport axle back. And thank you!
@unknownstudd692 жыл бұрын
So all you have is just headers and x pipe that’s it? No other modifications? Imagine if you crammed it
@302vettelife22 жыл бұрын
This was like the first mod I did. Yes, I did a heads/cam/intake down the road. Made good power for an LS1.
@Chepo15005 жыл бұрын
Straight pipe no cats or mufflers correct ? I was thinking about doing speed engineering with torquer V4 cam
@302vettelife25 жыл бұрын
I have a corsa sport axle back, no cats
@Chepo15005 жыл бұрын
302VetteLife send me message I have some questions if you don’t mind 5106809727
@eloyruperto6596 жыл бұрын
great video, the car sounds great....
@302vettelife26 жыл бұрын
Thanks man!
@anthonycardona31419 ай бұрын
How are headers holding up?
@delibrain9165 жыл бұрын
Did you notice big difference after long tubes ? I heard like 25lbft at like 2k rpm
@302vettelife25 жыл бұрын
I don't think so. It sounds so much better, it gives you the illusion of more power. I have not gotten it tuned yet, as I'm planning a cam swap next month. I will tell you, I felt a difference going to the LS6 intake. I have a 2000 and had the LS1 intake.
@Chepo15005 жыл бұрын
302VetteLife what color is yo intake ? Black ?
@302vettelife25 жыл бұрын
@@Chepo1500 Yes, it's black
@Chepo15005 жыл бұрын
302VetteLife I think I have Ls6 mine a 2000. I’m going with speed engineering and bald eagle cam swap . 👍🏻👍🏻🤨🍿
@302vettelife25 жыл бұрын
@@Chepo1500 The 2000 models had an LS1 intake stock. You'll want to check the part number on the intake to be sure you have an LS6 intake. They are worth a few more hps.
@ndog8085 жыл бұрын
Nice video, where did you find the 01-04 dip stick? How high did you need to lift the car to go from the bottom?
@302vettelife25 жыл бұрын
I got the dipstick used off the Corvette Forum. They are tough to find. I had it up and regular 2 ton jack stands. Pretty much maxed out. Nothing crazy though. Trust me, not a difficult install at all.
@EvoBlk2 жыл бұрын
You have to swap the dipstick?
@ndog8082 жыл бұрын
@@EvoBlk if you got an early vette where the dipstick tube attaches to the stock manifold you should get the later style dipstick tube which mounts to the cylinder heads. You also need the associated dipstick because the tube's length is different
@EvoBlk2 жыл бұрын
@@ndog808 thank you
@Chepo15005 жыл бұрын
And you still have mufflers correct ?
@302vettelife25 жыл бұрын
Yes, I have a Corsa sport system
@Chepo15005 жыл бұрын
302VetteLife how much was that ? Sounds loud tho. I’m doing speed engineering with x pipe btr stage 3 cam 👍🏻👌🏻
@302vettelife25 жыл бұрын
@@Chepo1500 the Corsa system was on it when I bought it. Plan on having a muffler shop weld everything up for you while you're done. I think I paid around 90 bucks to have that done
@Chepo15005 жыл бұрын
302VetteLife I should have muffler shop weld what ?? My x pipe ??
@Chepo15005 жыл бұрын
302VetteLife you welded the exhaust? You didn’t use the clamps ??
@Chepo15005 жыл бұрын
Did you have to change the oil tube and lip stick ?? I got those headers too not installed yet .
@302vettelife25 жыл бұрын
Yes, I had to get an oil pickup tube and dipstick from a 2001 through 2004 LS1. The earlier dipstick will not fit
@Chepo15005 жыл бұрын
302VetteLife ok so I would need it also .
@Chepo15005 жыл бұрын
What size is the tips ? 3.5 or .4in ?
@nickkrontz83732 жыл бұрын
2.5 probably
@302vettelife26 жыл бұрын
My car is a 2000, not a 2002. I miss spoke.
@jasonclement82055 жыл бұрын
How much did they charge for the weld if you don’t mind me asking