Abandoned metal fab shop has been completely cleaned up and ready for business again!

[@SirBoden]

Mr Tucker has himself a nice fab shop. Hope he appreciates just how lucky he is.

[@IR-nq4qv]

The sky is the limit.., so much stuff just waiting to be fabricated, this is like a man's candy store. A couple of small swivel pedestal jib cranes would be an asset over a weld table. Tucker you rock, the place looks awesome. Good job team. The shop needs a new sign "Tucker's Metal Works"

[@robertsimmons3556]

I like the way you guys roll! What an opportunity for Tucker! New shop looks great!

[@phil10000]

Tucker sure is lucky to have a dad like you to set him up in business

[@johnezell1366]

Tucker is a lucky young man to have you, his grandfather, and kevin helping him.

[@latisimusd]

Tucker's got got a nice custom shop to setup how he likes - what an opportunity for such a skilled young man. Good family around him!

[@rogerpittman6173]

Atta boy Tucker, great work

[@ewanstewart8011]

It’s great to see three generations of the same family working together 👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@lowellstevenson9162]

Clint that is an awesome looking shop also Tucker did an awesome job on the inside of that building ❤

[@36oldsaussiecoupe]

We saw tucker smiling it was a grin from ear to ear 🤣 good job on that new shop Mr T 👍

[@deeprunrailroad_Mike]

Two of my favorite things 70's trucks and trains. Really enjoy your videos. Mike

[@beckyumphrey2626]

Awesome looking shop!!!! Tucker did a phenomenal job. Big things in the future for sure.

[@bendtheirons8648]

Finally!! After all this time, a nice shot of a passing train headed by a quartet of SD70s 🙂 Love the new shop.

[@jburk8600]

Tucker has done a tremendous job cleaning the Helmsburg location. Great progress all around.

[@andytaylor3098]

a heart felt well done and good luck with it all in the future looks really good shop and with that new oil heater should be a nice place to work 👍👍👍👍

[@richwielechowski5191]

Love the train roll by at the end. Going to be a great work space when you’re done!

[@kevinhudson2231]

Is wonderful that Tucker getting his own shop

[@Rick-kk4yy]

❤❤❤ an 18 year old welder with his own shop, how cool is that ? I'm a friend, fan & follower.

[@Rutherford342]

Awesome video and great work, reminds me of working with my papaw. Don’t forget to remove that exit sign over the door where you built the rack.

[@UncleMelB]

Great to see Tucker and all setting up the fab shop. Lucky young man that will most likely be very successful in this endeavor. His skills are apparent and has great mentors to ask for advice. Need an update soon on the waste oil heater.

[@poste49]

Tucker is one fortunate man I love how dad and Kevin are so patient with him he is on a steep learning curve but seems to be handling it just fine 😁🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦

[@tomswindler64]

Very nice video,shop is coming along nicely,Tucker should be quite happy with the setup.just keep on doing what you do.be safe 😎😎😎👍👍👍

[@GenXmember]

Tucker and friends did an amazing job cleaning that place up earlier this year.

[@ronvera]

several decades ago, in my working years, we had a welder that had a terrible fear of spiders. One of his " friends" took his welding helmet and removed the outer glass and inserted a spider between the inner dark lens and the outer lens. As soon as he struck an arc, he saw the spider and the helmet flew amidst some strong curse words making reference to some kind of mother or other..

[@beaverc2884]

I'm excited to see the parts you're gonna create in the new shop. 😊

[@MySynthDungeon]

Tucker Rocks, Dad Rocks,C&C Rocks, Kevin Rock!sss,! Lov it ! Coffee on,Here we go! Cheers!;-)!!

[@azfarazuno3870]

What a great way to learn, makeing thing and doing it with your Dad.

[@bones2610]

I'm glad to see you guys doing well enough to expand as you have. Keep up the good work

[@Failure_Is_An_Option]

Even if you don't use the second compressor, go ahead and connect the tank. No downside to extra capacity. Add some auto drains to the tanks. Plenty of humidity in your area.

[@deanfrancis6474]

Team work always wins

[@PamellaAllens]

Your channel is a source of entertainment as well as education. Keep leading us into the world of knowledge and discovery!🐗🐴🎓

[@David-q4h5r]

Clint you have a fabulous shop there and Tucker now has his own shop to do jobs on there and free up some shop space at the original shop

[@YoutubeTRY-b6k]

Tucker can take his new shop forward I know, learnt from the best

[@vincentshelpfulhints4085]

Congratulations Tucker

[@davidhosmer1424]

Maybe a camera or UT wall thickness test on the air compressor tank. You know they didn't regularly drain it. Or wait till it leaks or blows up in the shed. Get the newer one running and put old bessy in retirement. I am looking forward to Tucker projects. Great videos Shop looks so much better.

[@deanfrancis6474]

Good job tucker, let him know he does good work

[@jerrymclean8075]

The new shop is looking good!

[@RobertWelch-fs2fv]

Clint, Tucker did an excellent job cleaning up the new shop ! Boston wise guy 👍👍👍👍👍👍👍👍👍👍 🇮🇪🇱🇷🦉🎅

[@chieftandriver703]

That is the longest train I have ever seen How cool is that? Great video👍

[@billyjones1969]

Great video

[@malcolmyarnold6172]

Good job guys thanks for sharing

[@JoeTerrell-g1l]

Great show

[@Z-Bart]

Good job Mr. Tucker. Hood Down!

[@Dirtbandit99]

Smile Tucker!! 😂

[@gordonmcmillan4709]

My shop compressor is from the 1940's and still runs like a champ - outlasted all the other equipment. 440v 3 Phase.

[@robertlinscott1551]

Haven't seen a C&C new video in a while. Like it as always.

[@georgeschikschneit7142]

You guys are amazing see you on the next video

[@abelincoln95]

Gardner-Denver is good stuff!! They made "rotary air screws" and those mrr-effers are badass!! We had 4 units in a manufacturing facility with 10 acres under roof.. Never ran out of air.

[@peterswalmen]

Put on the back of the rack some diagonal strips. The rack wil tip over sideways if somebody accidently hit with a forklift or so

[@C_CEQUIPMENT]

we did after the video

[@robertdensmore1696]

Looking good guys

[@diamondgservices1971]

I ran pex for my airlines several years ago. Love it.

[@markaumick7808]

Shop looks awesome

[@fireman14892]

Love the train footage!!

[@jackdawg4579]

Tucker Territory is almost complete!

[@DavidBall-v5i]

Bought a loaded abandoned metal shop gold mine.

[@JoeMGajdowski]

Another "Stuff like that video" thanks! Hope it pushes you closer to 200k subscribers.

[@applianceman6194]

That is a great place for the (Kevin Themed) Tommy DomaTaco Ranchero build for your next give-away.

[@BrettGell]

You guys are impressive!

[@gregm312]

shop is looking good

[@orkidknog4147]

that shed looks full before any hting starts to be made, i give the shop a year tuckers not into it as much as you think

[@johnunsicker7440]

Tucker will be fine once he gets all the cleaning and the shop setup like he wants it. Tucker is a very neat and organize person. He is like his Mrs. C. He is just burnout from cleaning the building up. If you never did that you have no clue how much stress and how fast you get burnout. Thing just don't seem to end and then all of a sudden it is done, and you can breathe. I moved two shops it sucked big time. Once he gets back to the welding and fab we be great.

[@mischef18]

All made for a great video guys and look forward to any videos from this new shop bro. Safe travels y'all. Ken.

[@chuckgray7749]

ya all may want to put an Air Dryer on the inside of the shop since the air line goes outside between the compressor and the inside of the shop to protect the plasma and the Hauss you have in there, those machining centers do not tolerate water in the lines just a heads up just in cause you didn't know or had not thought of that.

[@smmaxey]

Love the content guys. Exciting to have a "machine shop" separate from the main shop. Really shaping up. 😀

[@billsrq1788]

Hello from Siesta Key Florida

[@jerryfaulkner6518]

Why is it you guys make everything look so easy? 😂

[@stanscudds3830]

awesome video AGAIN

[@lhr1701]

Mr C we have steel racks that are like giant drawers. They crank out to get to the material and then crank back in to save room. We have them 20 feet and 40 feet in length. They do save floor space. We email you some pictures of our shop in a day or so.

[@JCS1069]

You guys should put a remote live cam on the RR crossing, many rail fans would watch every day.

[@johankarlsson2210]

That's a looong train! 💪😁👌

[@jamesblankenship5638]

That Highboy sounds Good!

[@rcclark8818]

Clint your wrong, that job pays immensely. The memories created and opportunities you are giving Hunter, will bring tears to his eyes when he is older and reminiscing. I know, my dad treated me in the same way.

[@howbow911]

New shop for the Rancheroooooooo!!!!

[@OutofTownwithRobinBell]

love this channel

[@alive6517]

Nice shop.

[@Walkergerald157]

At least you have the rail siding for bringing in steel and shipping out equipment and finished product the one place I used to work for we used to bring in all of our hardox steel by rail and also did rail to truck transfers and vise versa

[@stanwooddave9758]

I don't care what you say, that train wasn't the Polar Express, going to the North pole. Thanks for taking us along. Merry Christmas to all @ C & C Equipment. I think Tucker cracked a smile at the end of the video, but don't tell him.

[@randynewtonsr9659]

Mr Tucker has become quite the welder there Clint 😊👍 Congrats on the new fab shop it is coming along splendid 👌 I’d absolutely love to work in your shop as a fabricator/ mechanic butttt Indiana is quite a hop from southern New Jersey lol 😆

[@Undertaker-yx1rl]

Welcome everyone

[@johndernberger1961]

With that side rail at the new shop i can see some deliveries coming by rail.

[@paulfedorisin908]

It's time to get Tucker a helper.

[@stevea9604]

Tuckers retirement plan is coming together 👍🏻👌🏻🤩

[@axcs0119]

Got your own siding, now that would be a way to transport stuff from auction

[@allen8180]

Hi Clinton, just a thought; the other air compressor tank could be hooked up to the running tank and give you a lot more capacity. I enjoy your videos.

[@MySORRELL]

THANKS!

[@rs2024-s4u]

With the rail siding already at the new shop you could ship heavy equipment at much reduced freight rates. Just arrange for pick-up and local delivery at destination and even 200,000lbs+ equipment can be sent anywhere in the US. I think it's 1 ton 557 miles on a gallon of fuel for rail. Only a freighter fully loaded does better and freighters take much longer and needs a seagoing port which is not convenient (deal breaker) for C & C. Nice fabrication shop just add large lath (long bed) and with what equipment you already have most heavy equipment repairs can be handled in shop. Ray

[@chadshidler8903]

I never had the opportunity to do things with my dad. He passed away from Laukemea when I was 6 years old. He was 27. Cherish every moment with loved ones.

[@Texas4x]

I think you ought to call the Helmsburg property Tucker's Toybox!

[@91rss]

guessing Hunter and Tucker will be getting new business cards with the new roles........If you can get some of the copper with aluminum fins hot water baseboard heater pipes, I saw there the make great pipes for the outlet side of a compressor before the tank. It condenses the water out very well.. Those welding carts were on sale this week BTW

[@SWHBOYCE]

<a href="#" class="seekto" data-time="954">15:54</a>...Bet'cha could use a good moisture-separator on all your compressors there !!?..😁😃😂... <a href="#" class="seekto" data-time="1262">21:02</a>...Very cool tool !! ( the expander...)

[@user-fu1bh3dt2c]

I have to chuckle at you calling a compressor from the 60's "old". I have two 5HP Devilbiss units, one from 1945 and the other from 1946. Both of them are all original except I did swap a single phase motor onto one of 'em. Both still run and pump like the day they were made. As you said, from the days when things were built to last.

[@MrNiklas1967]

Hi buddy. Nice chop

[@terryroberson8851]

Advanced for him is going good

[@allanelliot1566]

Boss & Bubby with Mr. Tucker....great job....Bubby going be a movie star...showing some leg!!! When we going Turkey hunting???

[@GregBouknight]

I agree with that comment very lucky young man

[@seanpierce7673]

Sweet tuckers got himself a sweet shop! Hiws it feel tucker? And great job yeah all

[@ralphups7782]

I was just thinking about the new shop heater. It would be reassuring if you put a few Carbon monoxide detectors in.

[@tomtke7351]

forklifts = potential havoc

[@markstevenson4449]

Nice shop for the next generation. As you blocked the emergency exit door....move the door or panic bar to end door next to the job crane.

[@rickf5615]

So, Now that Tucker has his own shop is he going to have his own You Tube channel? AND TRAINS!! You seem to have done the train video thing before. got the timing of the end of the train nailed. I will bet that train gets to your other shop faster than you can.

[@DacDac-w7r]

You can ship big iron by Rail now👍