Fixing up a John Deere 850K dozer I bought at an auction. Did I get a pile of junk?

[@danyarbrough7847]

Meaningful to see Grampa, Son and grandson all working together. 😊

[@stephenwright3094]

The only Company I know that defies the Statement !! In this case Jack of all trades, Masters of all of them !! Young Tucker is stepping up to the plate now, progressing to another level eventually to be the Next Generation... Another Great Video chaps, Thank You all..

[@kurtrindgen4708]

Thank God there are a few willing to go in Tucker’s direction.

[@marcmartin3247]

One thing I like about you guys is that you are never shy about getting and using the best tools to get the job done. Yes, I realize it's a business expense, but I see so may other folks try to cheap it out and make do with half assed tools that end up breaking or being a safety issue. And Clinton, I'm beginning to understand your vision with the Helmsburg shop. I can see Tucker running it doing custom parts. I hope he realizes what an absolute blessing it is to be in the situation he's in and takes full advantage of it. What an opportunity to work side by side with your Dad and Granddad (and Kevin, of course!). Just amazing. Keep up the great work!

[@steveinwesternindiana9834]

Tucker really does a great job with a welder!

[@garymessina1609]

Three generations working together awesome job great video thanks Clint and Kevin and Tucker and Scott and Dad

[@rhondasweeney7271]

Great job, Tucker 👏 Clinton, Kevin, and Clinton's Father. What a productive team. Thank you for sharing 👌 😊

[@keeanmorishita8457]

You put out some really good videos Clint. Keep on keeping on

[@russellgilson4072]

Nice to see the different generations all contributing to the project, creating memories! Anther interesting video with good content.

[@TheRandythawkins]

I've watched your channel for several years and am always excited when a new video is released. After watching many videos I have come to the conclusion that more than half of your work consist of getting things hot and beating things with a variety of hammers. :) Keep 'em coming.

[@alvinsterk2918]

This was funny hammered the pin out into the pit with Tucker down there and Clinton turns and looks at the camera and grins 😅. I like a shop that can have fun and no one gets hurt. Nice😊

[@tbix1963]

Thanks for sharing your thoughts, ideas and videos. Great to see three generations working in the shop again. Wishing you and your family the best.

[@randydobson1863]

Hello C & C Equipment & it's is Randy and i like yours video is Cool & Thanks C & C Equipment & Friends Randy

[@philstreeter9703]

Great video. Good to see everyone working together.

[@kevinkenyon7045]

Clinton Kevin Tucker and Dad great work! Tucker’s welding skills are getting better every video! Thanks for sharing! Kevin

[@donnal.oglesby4806]

thinik it is gonna be a really nice working machine when you get done with all the repairs of her. Always great to see and watch 3 generations working together, and having it all documented on video!

[@rockman531]

Hey Clinton, Another great video! Fascinating to watch the repair process! Stay safe! Thumbs up! Jim

[@dansbrown1313]

Hello Clinton, Your decision to train up Tucker to be a welder/fitter has really paid off! He's a major asset already. Watching 3 generations of the Chitwood Family is so very cool and it's wonderful that Mr. Kevin is willing to help train you up!

[@casycasy5199]

those welds look great

[@johnwenzel9252]

Thanks Clint!

[@terryrogers1025]

One think for sure, it might show up as junk, but it sure won’t leave the shop like junk. Thanks for the update, enjoyed watching.

[@lenny5355]

Another Excellent video by Clint and the C&C crew keep em coming this is one of the best parts of my day after work.

[@seanpierce7673]

Great job gents! Tucker your welds are always improving! Great job!

[@sudd2685]

Subscribers are growing couldn’t happen to better folks, thank you so much for your videos. Spring is just around the corner. 😊

[@chrisgalliher497]

Because of your videos with that air chisel I had to get one this past Thursday. That thing is awesome!

[@Flathead-Steve]

My first set of tools was a snap-on beginners set up 40 years ago and over the years changed everything to Mac or Matco.

[@wallacejeffery5786]

Mighty fine welding and I have seen a lot with 40 years in a navy shipyard!!!

[@EdwardRouse-jj4wj]

Big tools for big jobs. Thanks for the show.

[@scottfleming9288]

I really like your attention to detail on your repairs. Worked on TD 20 years ago did a brake job and rebuilt the torque converter

[@MySynthDungeon]

Alright! ,Lets hangout with C&C and the crew! lol .lov it ,Cheers! Here we gooo! ;-)!!

[@glennjukes5581]

Wow-draining that final drive w/ ur new green flimsy funnel and the rebuilt (again) ratchet. Life is good at C&C Equip.

[@tomrogers323]

Thanks for the tour of the Snap On Truck……At 78 I’m giving away most of my tools, but nice to see the new ones as well as which ones you use.

[@brotherbruce]

If Grampa wants to keep it he has his reasons. He has a big project coming up. If you find something you like with minimal computers you have struck gold.

[@billvandorn5332]

You're so blessed to have three generations of family there creating more experiences and memories. Am I the only one that thinks those hydraulics look like they belong on a Tonka toy?

[@walterlewis964]

You love your father so much Clinton. It is so nice to know how much you have grown his knowledge of the business. Sausage fingers does a good job and Hunter is quite an excellent student. Randy is a rockstar. I only wish Mrs. C was in your videos. She is a babe!

[@UncleMelB]

Another good Noon Friday Release. 😊

[@kymw7833]

Good morning Clinton and the gang ,so Grandpa,s got his eye on this dozer😅😅😅. Its refreshing watching your cold wet weather,its Bloody hot here in Adelaide,its summer. Have a good weekend guys Kym Adelaide

[@KB-gs8zi]

Hey Clint & Crew !!! AIN'T it surprising what a little grease & maintenance will do to keep a piece of equipment running in top condition ?? Never could understand why the cylinders are left out exposed in the weather to rust up like they do ??? Sitting on blocks under the blade would surly help along with a little covering & ""DUCK TAPE "" to hold in place !! Well, at least you were able to keep the $$$$$ down on the repairs & NOT like the Military 850 that you had to replace the motor on !! 👍👍👍👍👍

[@danielgriffith7694]

Idea ? Why not get an Industrial jack hammer and use it to drive out rusted pins !! Bigger is always better with Hammers 👍

[@jerryfaulkner6518]

It didn't take long for Tucker to give your pin back 😂

[@clarencewiles963]

Work in progress Thumbs up 👍 thanks for sharing your work 😎

[@drmautz]

Air hammer sure comes in handy for a lot of things

[@kylejones2075]

Definitely a project thank you for sharing

[@buckethead9861]

Tucker puts out some nice looking dimes

[@brianhouseholder1074]

Keep on keeping on great content

[@jamesd.hummell4391]

Those step vans are built by Utilimaster in Bristol Indiana on Freightliner platform chassis. Up fitted by Lynch Display Vans (LDV) in Wisconsin.

[@Rick-kk4yy]

❤❤❤ i know he in school but we miss Hunter.

[@bob-bf3ru]

No step for you steppers, job well done

[@malcolmyarnold6172]

Good job guys thanks for sharing

[@SteveHardy1]

Every time I open one of your new videos I hold my breath hoping to see the giant volcano cutting torch in action!

[@Fatamus]

I’ll need coffee for this ☕️ So hold on I’ll be right back. 👍

[@amunderdog]

Caterpillar Inc. celebrates its 100-year anniversary with limited edition Cat machines in a special "Centennial Grey" paint scheme.

[@Camera1931-p5v]

Sometimes you have to use the BFH! LOL Great job!

[@president2]

Love it so much keep it up as always 💘

[@AdelinoGambiarras]

A part from the cylinders that need re-chrome it was one of quiet to be fixed for a wile. Overall it was nice to see the family hand o deck.

[@wileyhardwick3719]

Good afternoon Clint, Tucker and Kevin

[@Dave_9547]

Concrete demo and chunks used for fill on muddy soils is very hard on undercarriages, maybe more so than rock?

[@michaelhuffer9966]

Trucker,is a very good welding. 😊😊😊😊😊

[@whathasxgottodowithit3919.]

Thanks for posting, looks like it has been pushing crushed reinforced concrete. Just needs Kevin to get his paint brush out :-) All the best from the U.K.

[@jamesashley3827]

Thanks

[@davidkozuch6095]

You guys are doing a outstanding job 😊 and give that Dozer some TLC 😁

[@oldnstillworkin5709]

Nice beads Mr. T

[@tommybryson2311]

Could you have slotted all the shims to ease the rebuild? This is one of the best channels on KZbin Keep it coming guys 😁🏴󠁧󠁢󠁳󠁣󠁴󠁿🥃

[@1944chevytruck]

good work boys!

[@DonFlood-Warren]

Nailed it again Don Australia

[@billtodd6509]

Ours wore out the undercarriage and blade corners pushing 3 and 4 inch stone base for access roads through the soft ground to gas wells. They looked almost exactly like that. What Pap wants, Pap gets, 10-4?

[@raymondhorvatin1050]

Great job and video

[@Bob-j2l9x]

Top man tucker a real part of the team

[@Oliver880-eg8sz]

Nice of you to buy your father a dozer.

[@mischef18]

As always a great video bro, should be a good one for ya dad once you guys have it all sorted. Ken.

[@ccswede]

Tucker might consider making those pin drivers and selling the. For instance Dirt Perfect he’d had problems removing pins on his tile plow. Sure others have a similar problem removing pins.

[@johnroberts8475]

Another dozer that looks like it wasn't cared for from day one, but if dad has his eye on it, tell him the paint is extra. good video guys

[@MySORRELL]

thanks!

[@localcrew]

Tucker is looking a little scrappy there. Gave that pin a bit of a snap back atcha.

[@stevea9604]

Those blade shims make perfect sense if you are charging by the hour 🤣🤪🥺

[@Deanmiller-s7u]

Enjoyed the video as always, can't want until the next time .

[@hogrydr100]

and another GREAT video, my Friday is complete. thanks guys. i sure miss videos of working on those green military non running low hr 750`s n 850`s. i have to admit i felt my butt hole pucker up when i heard "the Snap On truck is here". ive said it before that there are just as good of tools out there for less, like Mac, Matco, Cornwell and they have trucks too.

[@JoeTerrell-g1l]

Great show

[@philglover2973]

Awesome video thanks lads very much appreciated top job top team very educational 🚜🚜🚜🚜🛠️🔧🛠️🔧

[@BrettGell]

Mr Randy is cool. 😎

[@Fatamus]

As soon as it started, another 30 likes came up

[@getonlygotonly]

y'all need one them mueller wrench extenders to add to your tool box

[@andybonneau9209]

The Snap-On truck is like Christmas that you have to pay for and costs 4 times as much.

[@samdodson2081]

I REALLY W=ENJOY THESE VIDEO''S

[@tomswindler64]

Nice video as always 👍👍👍😎😎😎

[@kentclaxton7230]

Tucker, next time you and Mr. C talk about pay you can remind him you now have a very valuable skill set that demands top pay. Sorry Mr. C.

[@davidfarley1175]

Clint, I have to ask, why in the hell would you buy a dozer, I have watched you for a long time if you need a dozer, why not hook up the trailer, get one from the lot, use it, and wash it, and return it to stock I'm glad to see Tucker getting after it

[@wink9970]

pin ejector pit. NICE

[@kerrypope767]

I tuned in just to see what you could shove into a con x box .

[@tedshaner750]

I miss the crown Vic races

[@sudd2685]

Randy’s ready to go.

[@rogerpittman6173]

Mr.Tucker, The Super Welder

[@Silverhornet81]

I don't miss the Snap On truck.. i still have my taco wagon in the garage, I wish I could sell it for what I paid.

[@tedbiernacki376]

Maybe things will improve when Deere moves to Mexico !

[@waltermattson5566]

Do you unhook batteries when you are welding on machines or do you just use the battery disconnect switch?

[@lenny5355]

Dang Clint are you trying to kill Tucker what did he do to you?lol

[@renebbenny-yc3jj]

nice work

[@xoxo2008oxox]

Nothing Runs Like a Deere. No wait, it doesn't run? Its a Deere! LOL...

[@kurtrindgen4708]

On the railroad we would call that ugly socket drive arrangement a “ lash up”.

[@raymondgochenour8725]

There for minute I thought I was watching Diesel Creek

[@c-v-n3322]

I'd say the reason why John Deere Doesn't slot them is because they don't want you working on there tractor even though you bought it you ain't allow to work on it. Keeping their service shops in business.