Pushing dirt with an International Dresser TD25G bulldozer better than a CAT or John Deere?

We haul the TD-25G out to push some dirt and had a couple fixes along the way.
Be sure to check out the first video on servicing the dozer
• Ex power line Dresser ...
For early access to add free videos and members only videos be sure to check out our Patreon page. This helps us keep doing what we are doing!
patreon.com/CCEQUIP
C&C Equipment stickers and merchandise can be found here
ccsurplusparts...
Thanks for watching
Facebook
/ candcequipment
Instagram
/ ccequipment
Tiktok
/ c_cequipment
Website
www.ccsurplus....
Email
[e-mail]

[@davekreidenweis3126]

That dozer is a BEAST, no computers, no BS. It's just pure power . Love it

[@garyfaulds2613]

Wow, your youngest looks 100% times better with his hair cut . He looks like a marine.

[@SuEnRoD]

"Sausage cam" That was funny!!🤣🤣🤣🤣

[@JamesKadel]

its always a pleasure to get information from someone that actually knows what they’re talking about..

[@saso-qk6mc]

If I ran something like that all day, my wife would wonder what I had been doing because I would have a big smile on my face that would never come off. Great video and machine.

[@carrollfranklin9807]

Even though Grandpa was in back ground obvious this was not his first rodeo. Good job .

[@baileystack1486]

Thanks for explaining the dozer, and how they work and how to operate. Also shout out that you owned your mistaken the leak. It happens.

[@SWHBOYCE]

2:00..." Oh, it's partly cloudy again !!..." 😂

[@ewanstewart8011]

God bless Kevin 😂

[@t1259sw]

Client always good to see your dad, my dad is gone and sure do miss him.

[@ibgrizz]

I ran a brand new one in 1985 and 1986 !! They will move alot of dirt!!

[@whathasxgottodowithit3919.]

That one will get the job done, amazing power and traction. Your Dad did a real good job on the Dam too.

[@qualitydirt]

You look like your enjoying yourself with a little seat time . Great change of pace from the normal everyday work. excellent video as usual Clint, keep them coming.

[@alvinhoffmann4361]

I love that TD25. My brother used to operate one of them. He was a heavy equipment operator for over 50 years.

[@Planeiron]

Another fine Dozer at C&C TD 25 wasn't even sweating pushin dirt, she's a dirt Bear👍👍👍👍👍👍

[@jimh5031]

I thought Clint was the Tool Master, but after watching this I know now he is the Obi Wan Kenobi of Dozers. Loved it.

[@stevea9604]

He is an incredible operator 🤩👍🏻☝🏻

[@billtopka2584]

The Dresser is one earth moving machine! 👍😎

[@davidearl1973]

From approximately 06:00 its like watching a Bigdeal18 video but without the dozer getting stuck in a pond 😂

[@CK-yi6pc]

Much better editing….😊

[@chipps1066]

They were designed from the start at IH to outperform the D-8 and the 2 spd steering was a proprietary feature I believe.

[@rp1645]

YES 😊 I think that is an excellent design feature. The two track steering control levers have a high and low speed. I ran a 125 & 175 International front loaders on a big development mainline and side sewer stubs job. I loved them. We had a Case 850- B and a 450-C the 850 case had the raised center between legs two levels for steering. I always steered the wrong way going backwards. So I just started using the pedals on the floor to go backwards

[@dustinmcintosh6799]

My favorite part of your videos is the commentary including opinions on each machine and operation.

[@kevinkenyon7045]

Clinton awesome piece of equipment, you and your Dad don’t waste any time! Thanks for sharing! Kevin

[@Sportinjected919]

So many people would debate the capability of these machines when they haven't experienced any of them. I love hearing you talk about equipment based off of real life experience as well as being an expert on the subject in general. I appreciate Clinton's knowledge drops!!

[@Rick-kk4yy]

❤❤Great to see Hunter my favorite.

[@gutsngorrrr]

That old Dresser is certainly a nice machine. Definitely prefer a machine like this comapred to the new stuff, thats full of electronics and not repaiable without a computer

[@chadfranzen2088]

Heck yeah!! That Dozer kicks butt!!

[@billblock8090]

That is a very impressive dozer. I like your content, that shows the equipment working in the real world. I wish you had something 7 days a week, but I know you are busy. Thanks, from The Hill Country of West Texas.

[@jeffreybassett9918]

Clint, thaks for the explaination - of the Pond work - just a quick comment - since you edit these - it would have been nice to have the "WHAT WE ARE BUILDING" - prior to the actual timelapse portion - to follow the actual progress - your HOW the tractor operates and walk around was perfect - here again - patching that before all your operating shots - would allow us to see and understand the actual movements as you operate. I really enjoy your channel.

[@justinmills8084]

I appreciate you explaining the dozer. Thanks

[@lucasweaver2918]

Great video my man, i can tell u really have a good amount of seat time just by watching u run that beast. I've ran dozers everyday for over 25 years and i can appreciate a good operator. Just hang in there and keep em comin.

[@davidbillings615]

Clinton your insights are always worth the time!

[@moonnugget1969]

Clint is a great teacher....always learn alot from C&C😊

[@joyyawilliams]

I would sure love to spend a day working with my dad.

[@sonnyevans4285]

Love some C&C Friday thanks guys !!!

[@longonetoo]

I really love your videos. I have ran a D6 and a 955 Caterpillar at an iron mine many years ago but never did maintenance or mechanic work on them. We had mechanics for such work so it is very interesting to me to watch your work. The welding your son does really excites me as I have done quite a bit of heavy industrial type welding ( mostly stick and TIG ).

[@danielgriffith7694]

Bravo 👏. Excellent explanation on how good a design and function of that dozer

[@gcflower99]

Great video and the "dozer ballet" at 17:00 was fantastic!! Loved your explanation of the theory of operation on the TD25...it's a working monster...CAT Killer indeed!

[@johnweatherford5760]

Clint I Reference your videos regularly when I’m buying used equipment I really do appreciate the knowledge you share. Thank you

[@MySynthDungeon]

My Friday go to!! Here we go! Big Smiles! Cheers!;-)!!

[@CK-yi6pc]

Oh man that is a BEAST and a BEAUTY…. 🇺🇸🇨🇱

[@philstreeter9703]

She's a nice dozer for sure.

[@tbix1963]

Thanks for sharing your thoughts, ideas and videos. Nice to see that giant beast getting a workout living the life it was made for.

[@terryrogers1025]

Sausage Cam! Only Kevin could come up with that, love it man!!😂 That dozer might be old, but it would hold its own against anything comparable to it today, and no DEF, no computers, just ole iron doing what it’s made to do, thanks Clint, really enjoyed watching, as far as the oops goes on the hoses, at least you caught it before you burned the trans up. Thanks for the video.

[@jeremyraeber4234]

You are a great operator and I wouldn't mind watching more videos of you operating equipment

[@rp1645]

Thank you so much 👍 ( Clint) for showing dirt moving by that BIG baby boy Go International all day 😊❤😊 a big thank you for showing controls how they move. What function do 😊❤😊 its so interesting that the JD put the Deceleration pedal on the opposite side of floor. I ran the Case 450-B back in 1979 On a big sewer mainline development 😊 The Two cases had the control levers for tracks both high/ low speeds. The case had a throttle pedal on floor.

[@danielnyce5972]

Very informative explanation of dozer operation

[@ewanstewart8011]

Thanks Clint I get so sick of seeing mechanic videos on your channel 😂🏴󠁧󠁢󠁳󠁣󠁴󠁿👍🏻

[@ronaldbollinger950]

I worked for a guy that had all Allis Chalmers equipment, I watched an HD16 Series B work circles around a D7 Cat, in fact, they sent the D7 operator home, because he was just in the way!

[@alkennedy1124]

They could use tons of these bulldozers down on the clean up, Helene, and maybe for cutting new roads in the higher parts on the canyon sides, !!! Thanks BigAl California

[@larryhaines2782]

Always like running a TD 25. I know at the time we had a TD 25C and I would much rather run it than the D 8 K. We had at the same time. There was an ongoing argument with fellow co-workers so we put the D 8 and the TD 25 blade to blade . The 25 (even though it had a sheep’s foot hooked on at the time) pushed the 8 backwards. We always thought the 25 fell in between the D 8 and the D 9.

[@DannyFinley-qg9ct]

Thanks for the great video! I can tell you and your Dad have worked together before, and that you both are great operators. I enjoyed the different in cab views showing how its done. The two speed steering looks like a great thing to have. Thanks for explaining how it works, that made perfect sense. Thats an awesome machine, and your Dad has nice equipment too. Nice job on the damn guys!

[@rugerfarming5387]

love seeing the triple nickel . Nice machine

[@barrowpeter604]

Kevin was born ready

[@stevenr8606]

👍🏼 air hammer for the WIN 😊

[@ChristopherAdams-tl3me]

Love the older machines there's no computer or complected electrical things to do wrong if they start they're ready to work if you maintain it 😅

[@tinymonster9762]

Great video. Really enjoyed it. Thank you very much!

[@garymessina1609]

She's a beast but I like it great video thanks Clint and Kevin and Hunter and Dad

[@stanwooddave9758]

Master class by Clint. Thank you for sharing all your knowledge about this International Dresser TD25G bulldozer. Blade is nice and polished.😆😆✔✔❤❤😎😎

[@alfredomarotta6604]

You're a smooth operator Clint.

[@gerrycarter4929]

Thanks for the narrative, it is great when you explain all the intricacies.

[@davidearl1973]

C&C Cocao plantation is coming along great 👍

[@haybine]

Interesting description of the transmission and clutches, thanks for that.

[@logancarter2134]

Very cool video and great information about how this machine works.

[@dburto13]

What a massive dozer! Nice job Clint! Looks like a blast to operate. Y’all do awesome work Brother.

[@malcolmyarnold6172]

Hi mate thanks for sharing that old girl surely can push some dirt doing a good job looking forward to seeing more of your videos

[@BobBeaumier]

It's a pusher, nice machine

[@Timsmith-q3y]

It would be great to see you do a video featuring your dad running different equipment.

[@johnunsicker7440]

Nice video. Great information on how they work as well. I think a lot of people are ok with you explain how you run them and how it works. I think most that watch your channel would like to know all they can. So, explaining how the dozer works helps use.

[@dankreoger611]

There is a sheriff in Florida named Chitwood. He's been arresting those kids threatening their schools. Seen the name on the JD and remembered the story.

[@paulblachford8559]

Look at the positives guys icebox got a free add out of your miss diagnosis 😂😂

[@charleswelch249]

From watching you pushing, I'd guess that the TD25 would be about a modern D10. That was a very informative machine for the time. I think selling the other one and fixing this one was a great investment. Besides, you are having a good time, and so is your dad. That's going to be a nice little pond.

[@richardhansen8473]

Clint looks like he is having so much fun he thinks he's a big kid at TOYS R US having a field day like a VACATION

[@rhondasweeney7271]

Awesome pushing dirt! Massive machine! Thanks for sharing 👍 😊

[@randydobson1863]

Hi C & C Equipment & it's is Randy and i like yours video is Cool & Thanks C & C Equipment & Friends Randy

[@kennyarmer4092]

It’s a beast, we had a td15 that gave us years of service, had blade rippers for ripping caliche.

[@mattfetters7321]

Fun to watch!!! Thank Ya for description of machinery

[@dalewun]

Thanks for explaining the operation of the 25… grew up in a family business with a mid 70’s TD-25, but was too young to run it (11-13 yrs old) and couldn't reach everything. Always wondered what those levers did.

[@davidfarrish9000]

That was in informative on how the dozer works

[@mischef18]

Enjoyed this video bro, Ya dad is good at operating equipment still which is handy for this job. Safe travels. Ken.

[@jimhancock5047]

She's a BIG girl!

[@outlawtruckinginc.5542]

Awesome old dozer 👍

[@thomasleonard1846]

Good lookin old dozer! She is a “Hoss”!

[@stevea9604]

Mechanizing in the dirt is different…Almost like Matt at Diesel Creek 👍🏻🤩😀

[@adriansherren2582]

Very informative, thanks

[@BuckMasterNorm]

Thanks that was great information on the dozer

[@LauraWesolowski-n4v]

Your channel is not just a source of information, it's a place where every video is a little masterpiece. Keep up the good work!🌷🏓🦭

[@stevea9604]

Deere helpin a Dresser is good help 🤩😎😀

[@raymondsyphers4239]

Great video clip. I always enjoy them. I like hearing about the different machines. PS Cris is probably wishing they had some of that red clay for pond job Ray from Oregon.

[@2wwwilly]

Another new old toy 😂😂😂❤❤ love it ..🎉🎉

[@Jeremy-q2c]

You need to tell Chris Guins to get a TD-25 when he gets tired of messing around with those matchbox D6&D7’s

[@CK-yi6pc]

Thanks so much for the tutorial… 🇺🇸🇨🇱

[@garyklavon5298]

thats one bad ass dozer good video

[@MySORRELL]

THANKS!

[@Dbergson]

Impressive machine!

[@timothyreed6054]

LOL Kevin sausage cam.

[@mattyc195]

Great video and thanks for explaining.

[@casycasy5199]

man that can push some dirt.

[@MySynthDungeon]

Kevin..Rocks! lol! ;-)!

[@Davidmckenzie-u8k]

Clint, brainfart !Welcome to my world. Great videos btw.

[@shannonstebbens6992]

Great explanation

[@chipps1066]

OH BOY!!!!!!!!!!!!!!!!!!!!

[@yenerm114]

That’s a tractor there bud 👌🏼🤘🏼🤘🏼