Part 2 John Deere 4045 engine rebuild after it was ran with gravel inside it

[@AppalachianPatriot]

That dozer needs “Rock Crusher Edition” decals on it after it gets painted.

[@songweaver6076]

🤣

[@AppalachianPatriot]

@C_CEQUIPMENT3 👈🏻SCAM!

[@JohnSmith-ud9ex]

Probably Polish. Good people, hard working and friendly. Hard humour, hard drinking and generally, as hard as nails... = )

[@CK-yi6pc]

Louisiana,,,,,cagers

[@thatdave86]

Probably have uncles back in Poland who have factories that can make anything you need!

[@greatergood3706]

Cajun crawdad 🦞 eating bayou boys

[@everestyeti]

My history teacher at school was Polish, when Germany and Russia invaded Poland in 1939 he and his brother left the country and walked through Europe before getting on a boat to the UK. Where he stayed and raised his family and became a teacher, he was more loyal to the United Kingdom and Winston Churchill than anyone I know. A lovely teacher who was passionate about his subject, when he passed away in the mid 90's at his funeral the Church was full and people were outside listening to the service as well. Most of the trades people we use are Polish, as you say they are good people and very hard working, fortunately they fit in nicely in the UK culture as our humour can be really dark which fits them. 👍

[@IR-nq4qv]

I admire the C&C Equipment shop being clean, orderly and tidy. It speaks volumes for the people who work there, with much respect to all, it's a team effort. I really enjoy the content of this channel. Give the young man (Tucker) a pat on the back for his welding.

[@jameslist7385]

did u notice the metal rail in the floor so the tracks dont damage it

[@MySynthDungeon]

Love hanging out with C&C on a Tuesday! Here we goooo! Cheers!;-)!!!!! Kevin! Rocks!;-)!!

[@allanelliot1566]

Boss & Bubby show!!! Very authentic....real talent ..No BS....better than NEWS!!! ...Thank You!!!

[@idessaoutlaw]

It's good that you wrote down the proper sequence of installation procedures so Kevin can keep working from the neck down 🤠👌

[@richardthyne3651]

4:35 Shafted on a Payday & Over Time Looms But You Owe Thee BOSS !!!

[@idessaoutlaw]

You forgot to tell Kevin that it's bad luck to roll your cords, hoses and welding leads up counter clockwise ..🐒..🐍😎👌

[@rp1645]

Thank you for talking about someone putting rocks in engine. Back in the late 1970s when working for my uncle. We were working a side sewer job in the BAD part of big city in my area. And the next morning we came to work and the young gang bangers had put as much rock as they could down the stack of are Case 580-C. We removed stack and Got as much out as possible. But boy those days were ruff, doing sewer jobs in that part of city. Thats why I loved the Lock out system of the International equipment they made back then. It was bullet proof

[@tedc7714]

I think that will fly with that propeller. Mount a seat on it. Mason would love it.

[@chevboy4.813]

At my facility, we got thousands of non-native speaking drivers. A big number of them from Ukraine, Slovakia and the like. All very nice.

[@OTEP1234567891011]

English /is/ an example of "non-native" speaking. lol

[@lordcaptainvonthrust3rd]

The only people who can technically speak "English" are people from England The same with other languages If you speak Spanish, that language came from Spain And Turkish comes from Turkey. Throwback to colonialism maybe but, no young country can claim a language of as it's own

[@JimWhitaker]

@@lordcaptainvonthrust3rd Technically that may be true but we are happy to lend "our" language to almost anyone. After all it makes foreign travel so much easier! 😉

[@lordcaptainvonthrust3rd]

@@JimWhitaker I am a mischievous little chimp and you saw through my ruse, Sir I am chuckling to myself whilst wearing my monocle and Union Jack underpants and sipping Earl Grey tea What ho, old chap 🧐 😂😂

[@alkennedy1124]

They all need to go back or to penalties school to learn English if they are going to be in MY COUTRY English is never gonna be anything but the first language ok it makes me so mad I’m spitting nails in my walls, ugggg, thanks BigAl California pray for them to all either become complete American language speaking or go back to where that came from right, thanks BigAl California.

[@WhatTheTarnation.]

Thank you for holding Kevin back from painting every part Cat Yellow...we know he is just chomping at the bit. It is good seeing the boys getting more camera time. Thank you for the content.

[@SPEEDY-FABSHACK]

I’d definitely guess at polish, they are usually quite jovial like that.

[@garymessina1609]

Let's pray it runs great thanks Clint and Kevin and Tucker

[@Texas4x]

Don't forget MASON!

[@rhondasweeney7271]

I absolutely love watching you all working on the Dozers. Thank you for sharing 👌

[@1fox4u8]

I got a buddy that sounds just like him he's from Poland

[@wendyandjodymaillet7503]

Clint, this project is really coming together. “Mason’s boys” had some great insight!😂 Keep up the great work C&C Crew! Kevin, you duh man! Take care and I’ll see y’all down the road…

[@hl8256]

It's got to be enjoyable going to work with the bunch you've got working there.

[@maxobara1496]

Great job on getting this together!! Let me tell you, the shop is like a movie set, “quiet on the set”!! Mr. C is filming 🎬🎥 And that one shot of Sausage fingers, fingers in the way, his wedding ring is getting strangled😂😂 Mason’s smile tells it all, great shop environment, of work and play💪💪🤗🇺🇸

[@C_CEQUIPMENT]

🤣🤣🤣

[@thomastrimberger157]

Love the way you give the young guys trust and authority and make work fun.

[@allanelliot1566]

Nice job...good motor build. Great video Bubby is Yiddish for Grandmother!!!

[@allanelliot1566]

Zady is for Grandfather. Enjoy you operation. Great stuff with the family!!! Thanks AECU

[@greggb1416]

Always like seeing the “nitty gritty” & “in’s and out’s” of what goes into doing these repairs in your shop…, including the trips to bolt bins and “o” ring bins. How come you only bought “10” of those dozer’s…? Was it because they didn’t have anymore…? Hahaha…! Great video series, Thank you sir.

[@Erik_MN]

Your engine building videos are my favorites! 😇

[@jeffryrichardson9105]

Sweet Rig! 👍🏽😊❤️🇺🇸

[@mikeembrey9176]

Ready to run 👍🏻🇺🇲

[@alfredomarotta6604]

Thanks for sharing. Nice longer video, always enjoyable

[@taloniilm]

Looking forward to hearing it run. I predict... sweetness !

[@clarencewiles963]

Looking forward to seeing the next.

[@ipaddlemyowncanoe.7441]

Yeah it's looking good. Interesting job getting all the stuff. Putting it all back together turned out all right. Yeah and his truck looks good. Good stuff guys. 👍👍🙂🇨🇦

[@arthurbiringer5676]

Again…. Can’t wait for the next exciting episode of The Rock Crusher Special.

[@jerryb1234]

Tuckers truck looks great,😉👍, thanks for sharing guys.

[@ronaldheit196]

Thumbs up every episode folks. The C & C crew deserve it for the awesome entertainment they provide us. Sausage Fingers, Mason and Clint this episode.

[@sylviaprudhomme5417]

Watching all. Never fail to enjoy❤❤❤

[@gatorguy7711]

An interesting rebuild! Great progress... Take care and be safe...

[@henkweurding3339]

Nice video, Eastern European truck driver. Tukkers Ford.... Man I wish I had a car like that when I was at his age .. Never made it beyond a Land Rover Discovery, still a great car with super off road capabilities.

[@kaydog2008]

Clint 2 hydraulic extension jib cranes in the middle of the shop would be a game changer 4 damn sure.

[@johnwesner3935]

Three years ago on the Friday before Father's Day I hauled home my 64 F100. Three previous owners attempted and gave up on this gem. Everything they touched was f'd up. Disc brake conversion had the calipers on the wrong side, attachment bolts in the wrong places as well as the mid 70s Ford rotors were even screwed up in that the wheel bearings couldn't snug up because they bottomed out on the spindle taper. And that was just the front axle!!😢 Fortunately it was a bare frame rebuild so everything was getting looked at anyway. I hate following behind knuckleheads!!😊

[@jamesfranks545]

Now Clint your gonna have to tell us the story about unloading the bulldozer off the side. We gotta hear that one.

[@raycollington4310]

This video is a great example of how you know your stuff and how thorough your work is. Your facility and setup is very impressive. The channel must be a great advert for your business. I did think your were being a bit nicer to Kevin than usual on this one. Hopefully you’ve come to appreciate him. Thank guys.

[@Mtlmshr]

And the story continues!

[@joeburrows6]

Perfect timing as I just sit down to eat my tee. Your friend over the pond. 🇬🇧🇺🇸

[@seancasey2444]

You eat tea or drink it.

[@joeburrows6]

@@seancasey2444 it’s a term we drink tea and eat tee. You say dinner. We say tee. Different parts of the world my friend we all have different sayings stop been a wise ass. Just to clear ones confusion. Here in the U.K. we have breakfast lunch/brunch then tee/dinner. Yes we do drink tea. Also coffee I can’t stand it personally.

[@ewanstewart8011]

Sausages are the reason Kevin is wearing a wedding ring, I know from experience 👍🏻🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@2nickles647]

Never wore a wedding ring 😅😅😅

[@Frank-Thoresen]

My dad never wore his wedding ring at work as a heavy machine mechanic. So many stories of mechanics losing their fingers because of the ring catching.

[@caseybhargraves3696]

I love that red Ford!!

[@hsiewert1312]

love seeing a organized workshop

[@terryrogers1025]

Somebody is going to get a sweet dozer when you guys get this one up and running, no doubt in my mind. Looking good, thanks for the update gentlemen, enjoying the series.

[@okjd159]

I'm willing to bet that Donaldson Co. makes the oil filter for JD.

[@Bman2020]

That was a awesome watch as always get Tucker that air horn 👍👋🇨🇦

[@BuckMasterNorm]

Thanks

[@jg6142]

Kevin put a nice paint job on that engine!

[@rah3295]

I always enjoy watching you and the guys bring equipment back to life. I think you guys do excellent work......Rick H.

[@henrybrundage7186]

Bloody Mary looking good!

[@travisshrewsbury7169]

Smells like prom night. Laughed out loud.

[@1944chevytruck]

good job boys!

[@kaydog2008]

TIP Clint to see if any belt pulley’s are bent indicate both front and back side on a lathe.

[@simonkennedy2700]

With the valve cover off is about the best time to install the rocks 😮 J Great job Well, done

[@David-ce9hj]

Love these rebuilds - looking forward to seeing if it starts. I hope there are no other issues.

[@ceedeekaytee1961]

You pretty much said exactly what I was thinking. @David-ce9hj 😃

[@donnal.oglesby4806]

Clint, I have fuilly enjoyed these videos on this complete rebuild of this poor u.s army John Deere 4045, that someone threw rocks into it, after only 300 hr. Sigh.. Know that the NEXT owner will treat her a lot better, after all the work that you, Kevin, and mason have done on her. Awesome work Gentlemen! Next time you see Mike [ Dirt Perfect ] tell him that he sent me to your channel, thanks Mike!

[@johnaikema1055]

4:35 is a shaft regarding additional work requests. well played!

[@wileyhardwick3719]

Clint good to see another great video. I enjoyed all of your videos. When are you make another video of the new shop that y’all brought.

[@thebear5454]

All that work and misery just because somebody didn't like a yellow motor in their Green Dozer. The shame. You and Kevin did an awesome job of saving the 4045 powerplant.

[@chrisbayus5189]

I do love me some OBS trucks! Ford, Chevy, Dodge. They all looked so good in the early 90’s

[@rccole1021]

well done

[@garyflint1793]

Thought I was watching the Price Is Right there when you said “Come on Down “ to Kevin.

[@Coopdaddy70]

That hose fitting and o ring stuff is fascinating to me, please keep it up!

[@Planeiron]

Get up on dem grandpappy steps...Great Vid 👍👍👍👍👍👍👍👍

[@haganquillen8852]

Like your music

[@tuffram2165]

FRAM was making all the JD filters for a long time not sure if they still do.

[@DougT25427]

These dudes are legit and should have twice the subscribers

[@ronaldwood9911]

Stare and compare is the best way to assemble if it's available

[@diamondgservices1971]

Get that Milwaukee out!!!

[@lodollar23]

Sweet!

[@wink9970]

Now I know why Kevin has one arm bigger. I think I had guessed wrong.

[@deliveryguy7402]

Savage! 😅

[@cullenmiller8170]

Nice video and good progress on that dozer. A lot of Ukrainians and Russians are running trucks these days. All the other former Soviet countries are in the mix too. Usually the white Volvo is a dead giveaway. 🤣🤣

[@AlexLindley-u5f]

Thanks Clint, Kevin, Mason and Hunter for sharing what youre up to - Great Rebuild and very educational !! Keep at it Guys !!!

[@DrMGomezJr]

As a mechanic in the USAF, I saw some bad incredible things. Two of them involved metal wedding bands. One was when a mechanic brushed his ring on a live wire...his finger was amputated in a sec. The other is when an airman jumped from a truck. The ring got caught on a brachet. The finger looked like an overly sharpened pencil...

[@C_CEQUIPMENT]

That’s why I don’t wear one

[@bobbymcbulge18]

Smells like prom night? 😮

[@golfbravowhiskey8669]

Love my 450g. Got it in 2001 with 844hrs on it. Just rolled 2000hrs last month. I put new sprockets, rails and roller on it at 1800hr that's the first and last dollar that was ever spent on it. That old machine will crank and the winter time when nothing else will

[@randyadams7269]

The satisfaction of having parts of all kinds and continue making progress has got to be very rewarding, even for your employees. Bloody Mary is badass. Always impressive sir! Thanks

[@kevinmurray7135]

I did make it back to finish I’d say it does run like a smooth motor cause you and Kevin built it well 👍😎🇺🇸 NY

[@busterbailey370]

I love to watch ur videos keep them coming please

[@phillipjones3342]

I admire your work ethic and the fun times you have excellent knowledge and professional installation thanks for sharing

[@michael_3985]

Nice job Clint this one look to be fighting you a little bit, but as usual you we’re up to the task.👍👍👍

[@argonthesad]

This is such high level mechanic work. It makes me tired even looking at it.

[@michaelmullins1290]

Nice work. I did think you was tapping the housing when Kevin was pushing the shaft out. Lol

[@philmckinney5837]

Great content and really like your long videos and tell the young lad he has a cool truck 👍

[@kenbouchet7874]

Can't wait to hear it run.

[@KyleKinard-j8e]

For sure do like seeing your parts area. It’s awesome you have that at your fingertips and they keep you stocked

[@downrightme6811]

Heck yeah the more knowledge the better 😊😊😊

[@Clint_Page1]

I enjoy watching you hunt for parts. Let’s people see what is really involved.

[@iainkinsella4708]

Kevin's biceps were pumped harrrrrddddd this vid...

[@oddtechman]

i do like the old fasteners drawers and stuff! always interesting to see all the different fittings and sizes etc plus the brands.. i see Matt over at DC got a Bolts and Nuts set where you have the Lawson.. That engine rebuild has been a labour of love and hate for sure lol

[@oddtechman]

@C_CEQUIPMENT3 nice try with the fake C&C profile..

[@HerbWarr]

Another great example of practical guys who know their stuff. Little tip from an old mechanic use a couple of long bolts with heads cut off screwed in for dowels to align heavy pieces like manifolds heads and bell housings/ torque converters makes it so easy if you work on your own. Keep up the great content cheers Herb and glad your now shipping to australia

[@machinemoverman4614]

I unloaded some trucks a couple months ago, I ask the guy we were working for if he had a Babble program, so I could understand the truck drivers. Don’t forget to add the gravel to that motor!

[@georgewest2096]

I like that little dozer. To bad I am retired and broke.

[@zenoelea8239]

Brilliant video, love the detail including making the hydraulic hose and your parts system.

[@mischef18]

Another enjoyable video on this 450G guys and good to hear Tucker's truck is going well. Safe travels. Ken.

[@JoeTerrell-g1l]

Love the rebuild

[@stevelalondejr2183]

Just once anti-seize your puller threads you might be surprised won't be long she'll be a running working dozer again then paint ! Great work !

[@roytempleton9320]

Oil works just as good. Never sieze gets all over everything and sucks to clean up.

[@kevintreadway5963]

Looking forward to seeing that jewel run. Nice work guys

[@Eric-fv4jx]

Make sure you time those alternator belts.