Cabin in the Woods 29: Installing Metal Ceiling Under Porch

In this episode of cabin in the woods, we install our metal ceiling under the porch. There are a couple unique details we like to do in order to make the installation of the porch ceiling steel a lot easier. Once the porch ceiling is installed we are able to finish installing our wall steel.
I also show you the detail on the end of our porch where the outside corner terminates at the top. I think this detail can be butchered many ways and this is the best way I have found to keep it clean and water tight. Let me know in the comments if you have seen it done a different way.
Top Tool List
imp.i284638.net/orPQm
Midwest Snips Set
imp.i284638.net/m72PX
Purchase Building Plans Here
rrplans.bigcartel.com/
Looking for good hearing protection on site or at home that also doubles as your radio, allows you to take phone calls, and has noise reduction? Check out ISOtunes! I've been wearing them for over a year and they've greatly helped reduce the ringing in my ears at night!
bit.ly/2PoXSBw
Use my Code to save!! RRB10
If you'd like to support RRBuildings, below are various ways to help!
Shirts: rrbuildings.bigcartel.com/
Hats: www.beachandbarn.com/collecti...
Patreon: / rrbuildings
Instagram: / rrbuildings
Music From Epidemic
www.epidemicsound.com/referra...

[@emreyavas8253]

For me, the ideas in kzbin.infoUgkxy_pn55PK60wAV3X_C_RoLS_67mNonoCE Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.

[@okoman9568]

The wave at the end was funny.

[@scottculver]

OMG! Greg is participating in the production!

[@Tallonat0r]

That Halo theme at 11:52! Loving the build so far. Great work as always!

[@matthi_be]

you can tell Greg is a gamer because he said "ez clap"

[@davidkipfer5469]

Haha yeah that’s awesome/hilarious.

[@TheSadButMadLad]

Sounded like he was practising for some opera. :-)

[@Omasis08]

Beat me to it 😂😂😂

[@Stan7670]

I'm amazed that just 2 guys have done all of that work.

[@caseyjohnson6573]

Yeah they used to have 3 guys what happened?

[@Ty1on3twelve]

@@caseyjohnson6573 Greg's brother Zach moved out of state with his parents I believe.

[@jerryweigl4730]

I am experienced with working with metal. It takes a lot of forethought and good workmanship to prevent potential leaks while at the same time making it look fantastic. Nice job.

[@claytonl.covell2634]

You're Attention on the little details is "OUTSTANDING"!!... I'm real enjoying watching this build!!.. (y)

[@jkid323]

when you first started this build you were white and middle of the build you were pink (sunburn) and now you almost back to your natural color lol.. your channel is awesome and impressive for a 2 man crew

[@freddien7]

See when a Good tradesman does a job Always looks good!!, you 2 should stand next to each other and pat each other on the back saying Good Job Good Job. Love Gregs singing, and the wave at the end. Fuunnyy.

[@oobaka1967]

Well...I was about to go to bed. Now I'll go to bed in 20 minutes. Thanks for keeping me up past my bedtime, Kyle.

[@jameshodgins1937]

The Cabin In The Woods is looking fantastic!

[@dannyspears514]

Whether it is a small build or huge one like this , never tire of the lessons you are gracious to teach. ,

[@jasongrinnell1986]

I’ve typed in all kinds of searches for shop houses, and shops. And never seen your videos. I type in kabota skidsteers and bam 💥. I got lots of watching to do now. Thank for posting these videos.

[@chaaam6986]

More details the better, I’m really learning a lot and excited to see the end result on this build... stay driven Kyle you’re an inspiration

[@kenknight4560]

1st rate work. The attention to detail is the mark of a true craftsman. There are a couple of other folks building their own places on KZbin that could learn something from this crew. Well done sir!

[@joha7484]

still fascinated by those angles and curves, Kyle !!!

[@T_157-40]

You lucked out with Greg. Stellar employee!

[@thunderpaint5912]

He is a team member lol

[@rayscott9368]

I absolutely love watching a skilled tradesman who takes pride in the work do their job. Great videos. New subscriber! Really enjoy watching you guys build.

[@RRBuildings]

Thanks ray

[@rigormortispoo]

You guys take building to a whole other level. It almost feels like art to me. The attention to detail and care taken is just first class. Many thanks from the Adelaide Hills in South Australia.

[@johnstup4479]

This project is coming along just great! Looking forward to more updates.

[@HenrikJanssonFilipstad]

The Forrest Gump wave at the end was priceless 😁

[@BaconDanish]

Greg and Kyle. Thank you for a amazing build series. Your both doing a fantastic job. Keep up the good work. I hope to meet you some day and have a beer or a glass of your favorite drink. Stay safe.

[@yeaheddyman]

Absolutely loving this series Kyle quality though and though! When it’s all said and done, for years to come this building will speak volumes about your craftsmanship 🤩👍🏻 go RR!👍🏻

[@petebird7171]

As usual a great days work, that corner detail you showed and explained was really neat, love it, 👍👍👍👍

[@1ronhall]

I enjoy your building videos ..... the details in workmanship makes for an outstanding finished product. Nice work!!

[@rubikrawler]

Really enjoying this series.

[@johnhunter273]

Loved the time lapse, and of course the details!!

[@michaelmolyneux598]

Nice to see Greg using his drill driver 👍

[@markevans9188]

Silento better watch out. there's some serious competition out there!

[@paulcochran1721]

Greg laughs like Scott Evil, Dr. Evil's Son ! Does great work, though !

[@quitram]

11:52 Good old Halo theme song.

[@michaelplays2449]

Your doing an fantastic job guys...........unreal !

[@michaelbrennan7148]

Nice work. Thanks for posting.

[@hhanger1]

I can't remember another build that was this involved I simply wouldn't have the patience to do a job like this. One day at a time...

[@divarachelenvy]

amazing work guys as always.

[@whoistyler]

Nice Greg! Love the HALO haaAaaAaaing!!

[@kevinwilliams8662]

Enjoying the show

[@lorenacuevasduarte]

For a minute I thought you were Canelo, the boxer. 😍

[@dokmanian]

such a great series

[@stevesmart666]

That Versetta Stone here at my Home Depot in Canada is $19.99 a sq’. That is one expensive project Kyle! Damn.

[@cantthinkofone77]

Really starting to look good now.

[@trampfossil9760]

Sheet rock stilts would come in handy on the roofing

[@stevea6722]

Be interesting to see how the walls get covered from the lower porch roof sections down to the porch ceiling for the spray foam.

[@michaelolenick4078]

Looks very professional job

[@mcdsdaddy]

This looks great!!

[@Dimmu666ist]

Nice idea of putting metal cieling

[@subway4185]

i will say fantastic job sir's, definitely a good watch

[@ImNorm29]

This is a great build and as always your videos are well done, but I'm super anxious to see how you do the interior using your exacting standards, math, etc.

[@gueorguimurdock2428]

Awesome work

[@wfcperrine]

I LOVE GREG'S VOICE!

[@prateekrajbhandari]

How is your jobsite always so clean? Are you two just that organized and never make a mess? No matter how hard I try every project I do it ends up looking like a tornado went through it within the first 15 mins.

[@SODAK2276]

Looking good!

[@Bigheadtf]

your logo is on the Tyvek thats cool!!

[@robertshaer6603]

Greg's Halo homage was pretty damn good tbh :-D

[@gopaldangar]

It looks very nice

[@daryldavirro4237]

Man that's looking good

[@denisdunichev5237]

Singing!!! Many thanks for good video

[@mistaboombosticyt]

Greg's Halo Theme was on point! 😂

[@KakashiHatake-xq6wx]

My dog started looking around for angels when she heard that melody Halo

[@ultrainstinct5100]

Hi, i do the same thincs in romania. I love this job!

[@stevesmart666]

4th, but just happy for this episode.

[@vinnypinatelli221]

I seen that rain when you were doing the corner trim it started then seemed to stop a minute later lol

[@mamaulsby]

Looking very good . Giving me ideas 🤔

[@iiamdtrainingacademy]

Come on amigo we're all waiting for a review of the Martinez Kit your rocking with your Diamondback... I'm so impatient I'll likely order it soon but would like to hear your review. As always great video and workmanship!!!

[@opendstudio7141]

Greg is a hoot. I bet his arm and neck were feeling the burn after screwing overhead all day.

[@billmorris2613]

Good morning from St John Parish, Louisiana 26 Oct 20.

[@christopherwebber1104]

Seems a 2x4 tee holder would work well for that, just slide t bar to hold and screw

[@deanehill9730]

Kyle, I wonder how long you are going to be able to work on your own installing panels like that. I used to be able to do such things as a motor mechanic working on heavy vehicles, but now that I have gotten older, my body resists and I don’t feel as safe on my feet anymore. Be careful, you don’t want to get injured. The building is coming along nicely and your attention to detail is beyond expectations. Thanks.

[@THEPAINOFITALL]

Love your work SUBSCIBED :D

[@vannorman1116]

Spray foam....the ONLY way to insulate !!

[@TwistedSCREWTVG]

Love your work! I have a question; apologies if its been covered before. With the amount of metal work you do have you ever thought of getting your own roll forming machine? Standing seam roofs are very strong and water tight. Keep up the good work.

[@Nocturnal2010]

Lol @12:00 I heard the theme from Halo 😂

[@davidsolis22]

When are the shirts coming out for “ wind driven rain” 😂 love the channel

[@MrLegendL2118]

Would you also be able to do the Rockwool Comfortboards on the exterior with wood strapping, then screw the metal to it??

[@loganmartin8613]

can you do a video on tips for people installing their own building. It would be helpful to hear from someone with experience.

[@diamondtech3131]

nice

[@Aepek]

If have Samsung or Apple phones you and Greg can listen to same song by sharing audio, fyi for ya....if didn’t know 😉 Building looks awesome, & been a fav build of mine so far. Love fireplace & all the details. Can’t wait to see finished building. Stay warm & safe✌🏼

[@terminalvelocity6398]

I've been following your channel for a long time, and this is probably my favorite project to date. I'm wondering if there's a General Contractor running this build.

[@RRBuildings]

Just the client and I working together

[@swizzopguwop7883]

greg sounded beautiful doing the halo song

[@mercedesriolima959]

Own.... See ya Greg! And Kyle...

[@T.E.P.]

always impressive .... from minneapolis you guys are weak when it comes to cold. XD

[@Chiquillin1984]

😂 😂 the halo theme made my night

[@keithparady2594]

I seen him digging through the bag of screws same things here they started giving us fine threaded screws and they suck

[@harrypeters8306]

No impact drivers on coated ABM panel screws, because they chip off the paint, and the screws rust much faster

[@Tiger28ism]

Recommended backyard garage

[@JasonFleckDaHawaiianViking]

On the porch ceiling steel its just left open to the interior of the building? will spray foam be sprayed into the porch ceiling cavity as well? Thanks!🤙🏼

[@mgmchicago]

Haha... was wondering how you did not have cuts on your hands from handling all that sharp metal without gloves. Then I see a close-up of your hands and, yep, a few cuts!

[@mincarelleonostri4350]

Shaloms ! !

[@MrTooTechnical]

Kick ass

[@mikenicholson2548]

Kyle a question on your last piece of metal that is cut length wise going into a j-channel do you put a filler piece in to hold it down tight if it's not right on a rib. I have seen when cut that you can see the waviness on the end in the j-channel. Thanks

[@dtm8073]

Awesome job Kyle, looks great! How high did you go up the wall with the Versetta Stone, I'm thinking of putting that on the front of my newly built garage and was thinking of 42" or 48" but was curious if there's a standard height or what you had done?

[@mommabears993]

He did 5 courses it looks like- at whatever height each panel is of that stuff.

[@bradgillock9691]

What is the trim against the wall for the ceiling?

[@theprojectcollector7260]

Q, is the dew not causing drips from the metal ceiling onto the porch. Thanks.

[@Recovering_Californian]

Have metal prices been going way up like lumber has?

[@user-po1yw2is3l]

잘보고있어 고마워

[@GriffinHooper]

Are there Lights / Fans in the deck ceilings? I did not see boxes get cut in?

[@paulkelly1702]

I notice you use the double sided step ladders. IMO, way more comfortable, way safer than (what I call) painters ladders. When you stand on both sides, your feet are better supported and spread further than side by side on the same rung.

[@RRBuildings]

agree

[@nicko198718]

Until both your feet slip and you do the splits on them.

[@paulkelly1702]

@@nicko198718 Not in 35 years of using them

[@bradhill5822]

Do you use magnetic tips on your driver bits ?

[@SkaterzAle]

Halo, love you

[@lapalomas]

Do you have the insulation contractor put bats in the open wall area above the porch ceiling?

[@hallenw]

You could stain the posts with black India ink stain.