Cable Reel trailer Tube Replacement

Hey guys, Here's a rather quick and simple job that you might gain some pointers from. Whether you're using a plasma cutter or a torch, the principles are the same. Kick back, enjoy your favorite snack and thanks for the support. You can find the plasma cutter I use at ‪@hypertherm‬ .
Here's a link to some of the tools I use.
Amazon link amzn.to/3TnyFdv
shop.pipeliner...

[@moisessalazar2417]

Curtis and IC Weld on a Fri to start my day 👍

[@gusm5128]

And don’t forget on fire welding !

[@utesbikes63]

And CEE

[@MrRebar15]

*I C Weld* Always a pleasure to see another video. Thank-you sir for taking the time to bring us along. GOD Bless.

[@htownblue11]

This man makes difficult look smooth, and impossible look only slightly challenging. High level skilled tradesman. Men like this build America.

[@Barry-s3v]

The third of my three favourite videos, one after the other, on Friday night; who could ask for more?

[@chuckyc6912]

Isaac you always explain what you are doing. Excellent work. Always informative thanks

[@williamparry9314]

That plasma cutter is like a thermal lance, but held in the hands of an expert. Great work Sir.

[@johnmolnar2957]

Issac, you make it look so easy .

[@johnglasgow83]

They should not call welding a trade. With the right tools in the hand of a true professional, it is an art.

[@PaulThomas-qo9vy]

Agreed. I believe welding, metal fab & machine work are classified under Industrial Arts at some colleges. These skills are truly art, especially welding, when performed by a master like Isaac (I C Weld)! Amen?

[@user-dn4iv2ne6r]

Most any trade is an art. It rather depends how much of yourself you put into it.

[@billbray5995]

The man, the myth, the legend in action. Always great work.

[@genop1038]

Don’t even care if I learn anything. Jut enjoy watching you work and the before and after. 👍

[@ZEROOOOOOOOOOOOOOO00]

The right tools in the right hands. 👍👍

[@rbelang8331]

A display of real nice craftmanship! Thanks...

[@fjr2go]

Awesome those 30 second instructional videos from Isaac. All you need is "cut, cut, cut, cut, cut, .... weld, weld, weld" straight forward :) :)

[@johnwesner3935]

Hey Issac, I guess I'm going to have to start using my plasma Cutter more!😊 And thanks for reminding me I didn't level my saw bucks when I fabricated my jeep body. I "assumed" the floor was a least flat.😢Ha! So soon old and so slow smart!😮 Thanks

[@markfryer9880]

That word "assume" has tripped up many a tradie. Hence the saying that "assume" will make an ass out of you and me! 😮 Always check then recheck levels and measurements. Mark from Melbourne Australia 🇦🇺

[@endoskeleton99]

Masterful work with the plasma cutter! Maybe one day I'll get as good as you. 😁 I'll keep improving my welding business and skills as long as You keep making video's!! Thanks so much!

[@marionstorm9004]

Another nice job. It looked like a simpler job, but I still learned a lot from your trimming techniques. No fuss -no muss - the word elegant comes to mind after you finished. Thanks!

[@stewkingjr]

It was not difficult! All i did was sit here and watch you work. Yea, did have to brew another cuppa, but other than that, piece of cake!

[@mfc4591]

I always look forward to seeing what your next 'job' will be. Nice welds. Have a great week end.

[@sackvilleweldingservices]

Great work there young man. The plasma cutter made easy work of cutting and blowing off the welds.

[@richardlincoln8438]

Thank You for spending the time to show us this repair Issac. Best Wishes to You and Your Family.

[@terrancemcintyre8062]

That extension handle is Sweet

[@Spitter-ud8jd]

Don't you just hate it when your tools mysteriously dull, break or go missing all by them self's. Funny it never happened before my kids started working in my shop. I spend more time cleaning their projects then working mine. I don't mind just as long as the fridge has beer in it.🍻

[@dozer1642]

That straight six sure is pretty.

[@petes7796]

Isaac is awesome. He knows what he doing.👍

[@madeinusa5201]

Doctor, your patient came through nicely on the operating table! I always learn something!

[@mikewhitley1183]

Good morning I really like your videos and you are first class all the way you can't beat old school, have a great day!

[@JonesMetalCraft]

Been Jonesing for another video. Thanks for sharing.

[@russellgilson4072]

good stuff, utilizing the tools of the craft and the knowledge of the operator.

[@michaelmcclure8673]

Another quality job done by Issac. 😊

[@gearhead181]

Always amazes me how easy you make this work look. Lots of experience and skill. Love the videos

[@robertr4193]

That plasma cutter blew through the walls of that tubing like it wasn't even there.

[@robertpeters9438]

That's what the plasma from an anti tank round does.

[@francodeiuliis1562]

That’s a serious plasma cutter Thanks for sharing Cheers from Nova Scotia

[@RalfyCustoms]

Happy days Isaac, always thoroughly enjoy your videos, great work buddy, thank you for sharing

[@McNeillWelding]

ICW smokes another one like it ain’t nothing. You the man Isaac thanks for sharing.

[@danielgriffith7694]

Excellent work as always 👍👍

[@andygulick6085]

another nice repair

[@graemewhite5029]

You're morphing into Mr Miyagi with that beard Isaac but I think your plasma has the edge on his chop sticks !

[@garymallard4699]

" Gouge Off..Weld On " 🤓 🇨🇦🤓🤟

[@gregweinfurtner7774]

Very nicely done. I always have a cup of coffee and learn something every time. Been welding since I was a kid, not my career in life. But once you start welding, you wonder how you ever got along without one! Thanks.Issac

[@dennisbailey4296]

That great-looking beard makes you look like a professor teaching us how too Weld and the do's and don'ts of good welding!!! All the best from Surrey BC Canada

[@GuitarDad5150]

The steady hand of a surgeon. Always look forward to your videos. What a master.

[@gwharton68]

Always fun to watch a master at work. Hope Beryl didn't bite you too hard.

[@ICWeld]

Nope, Beryl completely missed us. Got some good breezes out of it though!

[@Blackopsmechanic338]

Always learning from your videos on what not to do😂😂😂 great Job Brother. Peace

[@hommie789]

that was a fun little video Isaac, thanks for posting it

[@JT-tz5hp]

Great work as usual!

[@MikeBaxterABC]

13:16 ... Beautiful! .. That's how my Parts look ... (after grinding for a half hour! :) LOL

[@Thrash155]

That Plasma Gouge sure makes it easier to cut welds off, doesn't look to messy either. Nice Repair Issac. :)

[@randygraves6760]

Isaac one thing like about your videos no talk just work.

[@dtnicholls1]

Easy, yes. Harder than you make it look, also yes.

[@tallyman15]

Nice work!

[@patricklorio7657]

I've been meaning to tell you that your Vandyke beard is awesome. I had a beard for years, but being 77 years old, I don't need anything that makes me look older. But, in the long run, it really doesn't matter.

[@ICWeld]

Oh, I totally agree on the beard making a person look older! I began growing it for kicks at first but my wife got to liking it. Now i feel stuck!😄😄😄. And yes, I dont like it because it makes me look old. My face is the only area that I have gray hair. It makes me look super old. I may shave it off one day. Gotta keep feeling as young as I can. Especially once I passed the half century mark!😁😁😁

[@patricklorio7657]

@@ICWeld Amen, brother! Getting old aint for sissies.

[@nickrandol9133]

@@ICWeld. Keep it. It looks good on you.

[@surveywaters]

Thanks for the video.

[@freebirdwelds]

Nice Job!

[@petermccuskey1832]

I really enjoyed this because it was straight forward until the end where you extended the welds to release the stress point. I will have to try that. Thank you, sir, and Stay Safe.

[@carloskawasaki656]

Thank you for sharing, another day who start very well with you and your project, i learn a lot , you are always very pertinent, from Quebec, canada 👍👍👍👍

[@williammccartney4833]

Your the man once again IC have a wonderful day Everyone!.

[@georgetarabini6552]

Like these fun little projects, looks good

[@Hey_Its_That_Guy]

Always learning something from you, thanks Isaac!

[@ypaulbrown]

always wonderful Issac........Paul in Orlando

[@johnmcclelland5265]

Lovely work

[@Donna-li9el]

I see your using the plasma cutter more and more, its handy to squees the trigger and go.I've owned a hypertherm 65 for about 10 years and I don't use a torch much any more.I don't know if its cheaper to use than a torch or not, because the expendables are't cheap. My grand kids love it but they don't pay for it, my wife complains but she complains about the price of the gas for the torch, AMONG OTHER THINGS

[@ghilreese3413]

Thanks for the videos. Job well done.

[@surindersandhi3924]

Hi My Dear Friend Very Very Great Job ❤❤❤❤❤

[@OO-xc7zg]

Great job 👍👍

[@overwatch2671]

Another great video Issac. I know one thing. That plasma cutting wand is the bee's knees. I like that thing.

[@f0rumrr]

keep teaching us brother

[@user-yf1fe7ei7n]

This man’s skills are excellent !

[@a_dan8693]

Keep em coming 👏

[@ypaulbrown]

Issac, with that long Plasma torch, you could make your own Star Wars Movie.....

[@robertmanley7556]

Very nice work as always !! I can't wait to see what you bought for the smoke . I have a idea I want to see if I am right .Exceptional work as always !! 👍👍👍

[@markreetz1001]

That was a pretty straight forward job, but you make it look easier than it should! lol! Like the goatee. Hadn't noticed it before. Gives you a look of authority! Great video!!

[@Cameron_D]

Rocking the beard 🤗

[@olddog2361]

good job my friend. Had me worried for a few when you didn't center the square tube on the pipe by measuring from each end. As you would say, 'it worked out OK and looks pretty good. The cheap folks I worked for handed you a cutting torch. I don't think a plasma cutter was even around those years. We did have arc gouge then however.

[@tammyfinch5469]

How fun! I wish I could do that. 😮

[@swenwesselink4500]

Having the right tools means the job is already halve done. Good job matey.

[@ICWeld]

Yes exactly.

[@justinjones3880]

I don't use flap wheels anymore I've found a sand disk from 3m called cubitron 5" diameter is the only way to go they are a bit spendy to buy the bag but they last I can bevel between 30-40 4" sch 40 pipe with 1 disk. Total game changer here in northern Utah they are around 5-6 bucks a disk

[@roneckler9937]

Another great repair. I've been thinking about growing my goatee back again. I shaved it off when I moved from Colorado to Florida, but I still feel naked without it.

[@Dibulok]

Nice job as usual Isac. You really should use a fresh air helmet for that stuff. Be careful.

[@campy9712]

Nice work, and another interesting video. Thanks for sharing it with us.

[@woody1320]

Thanks for taking us along, always enjoy your craftsmanship. Snowball Engineering is another good one along with Kurtis.

[@ryanreaves1203]

Smooth operator icweld.

[@keb7448]

Thanks. Nice and fluent work. You are a truly master with the torch.👏

[@rogerharper6060]

great video Isaac love watching a great welder

[@patrickradcliffe3837]

That's definitely some anger orange smoke.

[@jameskim62]

Excellent Prisma cutting !!!!~~~~~~

[@mickryan3516]

Always nice seeing a master at his trade keep them coming please

[@michaelGreen-uj2hg]

Thank you for todays lesson sir

[@ypaulbrown]

Your need a cold beer.....cheers, Paul

[@skwerlz]

Can't wait to see what you found to help with the rust clouds, I've been sick of the respirator I wear since the day I bought it. I set up a high volume fan in the summer but I'm in the half of the country that actually gets cold so 4+ months out of the year that's not an option.

[@ICWeld]

Well, its actually just a fan with a 30' flex tube.

[@skwerlz]

@@ICWeld Shucks, guess I'll just have to watch the next one anyway.

[@richardellis3141]

nice, thanks for the lesson

[@kimazbell460]

Isaac, I'm always amazed at your ability to cut circles freehand. When you are finished it looks like you had used a template.

[@billblock8090]

Great content as usual. Hello from the Hill Country.

[@ronsimpson143]

He said, "As long as I don't screw it up too bad," and the author in me thought, "That's foreshadowing." And then I thought, gee, I hope not.

[@Dan-ud8ob]

I always enjoy your channel Isaac..

[@argee55]

Another great video.

[@stovebolt448]

Hi I.C. gads what a neat video, simple project repair very well done, thanks for taking us going to be interesting to see what you purchased for all that rust dust that was thick. Ok thanks again for the video know there a pain to do but we enjoy them, take care.........................see ya

[@raymondhorvatin1050]

nice job

[@Jesse-f4b]

I’d love to see a video of how you got your start in the trade and just some history of how you got to where you are, as someone who is trying to start out in the industry I’d love to hear your story

[@hubertrobinson8825]

Always a pleasure watching you work and a lesson learned thanks for sharing

[@ssmith6019]

Another nice job

[@mrscuba1693]

I am not a welder I do some welding love the videos just like your work