Cadillac Escalade Ballast Completely Eliminated, Watch.

This is a 2008 Cadillac Escalade. Totally Eliminating The Ballast Finally! Here is what you'll need, Brand: SEALIGHT SCOPARO LED LIGHING-MODEL NO. HLL/H8/H9. DRYCONN AQUA/ORANGE 25-PACK AQUA WIRE CONNECTORS. You can also purchase a tube of silicone to ensure that the waterproof connectors are secured completely. Go to Lowes website, or drive, to buy the connectors. Mostly any vehicle that has a ballast can be transformed. Google this title: Sealight h11/h8/h9. These are the same bulbs that I purchased. "IT IS TIME TO KEEP COMPANIES OUT OF OUR POCKETS CONTINUOUSLY"! Updated review 4/4/2022. Upon further notice, it has been raining cats & dogs lately, and the new bulbs are still on point. I'm loving hitting the key fob as both bulbs light up together, and not individually. Also for an even better result this product can be used to fortify waterproofing of the wires once they are cut, & screwed together with the waterproofing connectors. Permetex Clear Silicone. Autozone, Lowes, Home Depot etc... has this product. • Onewheel Two-X Install... . UPDATE: As of June 7th 2022 my headlights continue to work together when I turn them on. April Rain, May, June, & July, no issues.

[@MrImpossible]

Bro.. I appreciate your time in this video and the FREE information.🤙🏾

[@rcaldwell56]

🤙👍

[@user-xj3dm6jn2z]

Thnx for the example. I understand it better now

[@cjack101730]

Thank You! May all the good Graces shine upon You.

[@adog1275]

I appreciate this video thanks you saved me a ongoing headache the only thing I did differently was instead of cutting the end of the connector I wired in a pigtail so that way in the future I can replace the light without cutting it again

[@rcaldwell56]

I'LL UNSCREW THE CONNECTORS, THEN WIRES RECONNECT THE WIRES, THEN RE-SCREW THE CONNECTORS, "DONE"!😉😎

[@raworthyel3786]

It works exactly as stated! Thanks so much.

[@rcaldwell56]

YOU'RE QUITE WELCOME!😉😎👊👍

[@waynec17]

bro you are the best !!!

[@raworthyel3786]

My savior for my dilemma today. THANK YOU!

[@rcaldwell56]

🤭😉👍 Since I aired this video, I never looked back! NO PROBLEMS ONCE SO EVER!

[@djcliffyc]

Good info thanks

[@rcaldwell56]

Just trying to help.

[@OurTreasuredHome]

Fantastic thank you for sharing 🥰

[@rcaldwell56]

👍👌

[@OurTreasuredHome]

@@rcaldwell56 🎊👊

[@rolandjones6277]

Thanks buddy I needed that I just want and Brot new light

[@rcaldwell56]

JUST TRYING TO KEEP FOLKS OUT OF OUR POCKETS!😉

[@sacraficiallandsacraficial9666]

Bravo

[@diddyp7126]

What about the light over top of that light I want all my lights to work do I have to do the same thing with those lights too

[@rcaldwell56]

I'VE NOT HAD TO CHANGE THE UPPERS YET. STILL LICKING, AND TICKING!

[@rafaelnavarro8857]

It’s not going to overheat or burn my led ? Thinking of doing it rn Bcs someone wired one of the headlights to be halogen before I bought the car but one side still has hid .

[@rcaldwell56]

FOLLOW THE VIDEO INSTRUCTIONS, YOU'LL BE FINE!

[@ScrappyDooToo]

How do they compare to the original HID bulbs for night driving?

[@rcaldwell56]

THEY'RE A LITTLE BRIGHTER, BUT NOT BY MUCH IN MY OPINION.

[@thishandleisalreadytaken]

the ballast does not fail because of water splashing up. it fails because of condensation inside of the headlight housing which then falls down into the ballast connector. the ballast is sealed from the bottom but not the top. you can see at the end of your video that you have condensation inside of your headlight housing which caused your ballast to fail.

[@rcaldwell56]

YEAH, BUT DID YOU CHANGE YOUR ORIGINAL HEADLIGHTS OVER TO L.E.D"S. AFTER UNPLUGGING, AND SHAKING THE WATER OUT OF THE BALLAST?

[@thishandleisalreadytaken]

@@rcaldwell56 I removed all the condensation and lightly injected air to find the source of the leak, and then sealed it with the proper sealant… And then regained use of my HID system, instead of putting LEDs in there and cutting up and splicing factory wire harness with Chinese LEDs

[@joshlawill]

​@@thishandleisalreadytakenwhich sealant did you use?

[@flowercristales7998]

I have too much trouble with those lights.

[@danthonymonet9400]

Audio is very low. I can barely hear you.

[@Charlies_Corner]

Why are we using house connectors on cars? Those blue twist connectors are for houses not cars, they make heat shrink connectors for cars..

[@rcaldwell56]

I HAVEN'T HAD ONE PROBLEM SINCE I AIRED THIS VIDEO, RAIN, SLEET, NOR SNOW. WORK SMART NOT TAKE ALL DAY DOING THINGS!🤓👍

[@JoseLopez-xq6ui]

Bad idea how are you going to have high beams?????? For dark roads????

[@timhansonservices3374]

Now you don't have high beams u should've bought the right bulbs

[@keylajolee3898]

【ｐｒｏｍｏｓｍ】 ✨

[@threebfishing1528]

Why are talking so low Bro.