Drawing Detailing in Creo Parametric with GD&T (Part-02) Drawing Views and Dimensions

[@anvilama]

I am very thankful to you. I believe you are one of the best teachers in Creo Parametric.

[@CADxTraining]

Thankyou and Yes I also take separate training classes for Creo parametric.

[@anvilama]

@@CADxTraining Could you please give me a detail about your course? I will be happy to learn from you.

[@CADxTraining]

Send me a email to [e-mail] And I will reply to you asap.

[@CADxTraining]

Send me a email to [e-mail] And I will reply to you asap.

[@SaitekiCo]

If I pass my upcoming CAD-exam, it will only be because of your videos. If I fail however, it will only be because I didn't find your videos sooner.

[@ketandeshpande6149]

After following same procedure as yours I'm not getting pitch circle diameter in drg. View.. And when I go to drg. As I place the view I'm getting 3d solid view everytime I need to go to view display and change it to no hidden view how to tackle this?

[@CADxTraining]

This is controlled by config.pro. I will tell you the complete procedure soon.

[@ndot9238]

Im having the same issues. Did you find a solution

[@omkarsutar578]

14:40 after click on dimensions, tolerance tap didn't open to change nominal to basic. What do I do?

[@omkarsutar578]

tol_display change to "yes" from detail option 👍🏻

[@alaganarivu8698]

How do you do this

[@kirans6992]

One of best video... Keep sharing knowledge sr👏👏

[@abhishekvankar2396]

I have a student version of creo, after clicking dimension the tolerance tab is not activating why ?

[@CADxTraining]

I don't have any idea about the student version.

[@babluvashisth8344]

How I am make details view around circle settings When I am making details view its come with leader so how I am change this settings

[@jamiemills954]

Very helpful video set. Thank you for putting this together.

[@printlife9016]

Hi, I made an engineering drawing based on a simple rectangle block model. I had four Rounds added to the four corners. One question, how did Creo count the quantity of Round? I want it to display, say 4 x R5 in the drawing, but it only showed R5?

[@sitaramtudu2095]

I am very thankful to you, this is very useful to me, but I have some doubt 1. When I took limit in Tolerance, edit option (15:55) above superscript option is not active in my creo, is there any dimension or Tolerance setting, please tell me, If you share the all setting then i will be very help full for me.

[@gasserjoshua7448]

9:36 maybe it’s because I am using a student version of CREO but “Dimension” is not an option for me. Or maybe the name changed in version 8 of CREO? Thanks as always for your videos

[@newlearningonbaking4327]

sir if section view in drawing showing only half portion then whta to do....under sectioned area i have selected full then to its showing half

[@dsohal]

how to show measuring units on both dimensions ( ex: 254.0 mm [10.0 in] )

[@ashutosh8657]

sir revolve command me mera dimension centre line se reference le raha hai. jis wajah se muze diameter ka half value dalna padta hai, muze full diameter me lane ke vaste kya karna hoga

[@CADxTraining]

Just place a datum centre line instead of the sketch centre line. You will get the diameter dimension.

[@umeshgaikwad2789]

Thank you very much sir This video was very helpfull I have one doubt about No combined states while taking first general view. So please help us.

[@avtarsinghpunjabi2942]

How can you change line style of pcd to centerline which config file is there for the same.

[@CADxTraining]

It happens automatically. Watch this to understand it better. kzbin.info/www/bejne/p3SrmJSXotuZgdE

[@kbnchannel1991]

Sir how to make drawing view, want place general view it directly take solid view and one more doubt will it able to rotate general view as per our direction

[@robertanto]

how to model the pressure vessel nozzle r.f pad in creo

[@CADxTraining]

Share the reference

[@robertanto]

@@CADxTraining provide your WhatsApp or mail I’d

[@robertanto]

@@CADxTraining I can’t attach my drawing in message so provide ur WhatsApp or mail I’d

[@CADxTraining]

[e-mail]

[@robertanto]

@@CADxTraining mail sent

[@baluraj7301]

Great sir. Simply crystal clear explanation

[@NorbiGaming]

This is extremely useful, thanks.

[@jamilafridi18]

Which cad software r u using man😃? It looks very weird. Try to use solidworks 2022-2023

[@CADxTraining]

It is Creo parametric, much more advanced than solidworks.

[@spvids46]

Thank you a lot sir. You are doing really great. Thank you thank you.

[@joydeeppaul6252]

I need one video to understand how you prepared the detail file.

[@CADxTraining]

Okay I will do that

[@rajeshsinghjadham9899]

Thanks sirji You are great sir

[@shivamohan632]

Thank u sir, please do more videos for detaling

[@901help2]

Very useful, thank you!

[@emreerdogan4360]

are you using creo as a licensed software?

[@akshayjadhav2269]

Hello sir, Thanks so much for all the helpful videos. Sir, Can I get the default setting .confg file and .detail file which is created by you?

[@shibusukumaran1141]

critical dimensions ?

[@kidthanksyou]

Làm thế nào để vẽ mẫu từ hình ảnh

[@omkarpatil4157]

how to create section line

[@CADxTraining]

Use "add section line" option

[@shivamohan632]

super explanation please make more videos on creo i am new to creo

[@crystalcad2485]

Sir how to show surface finish symbol with N symbol..? Like N1, N2

[@CADxTraining]

You can create the custom symbol

[@viralagricultureworks1710]

Sir, how to add A in between two Arrow of circle in detail view symbol.

[@CADxTraining]

You get this option inside the detail view. Select a semi option inside the detail view.

[@viralagricultureworks1710]

Thanks sir

[@abhiramthokala8672]

Sir, i can able see dimension tab on menu tab will you me sir in creo 3.0

[@CADxTraining]

Your question is not clear.

[@abhiramthokala8672]

@@CADxTraining In Creo 3.0 can get the dimension tap on menu after selecting 60° dimension and . I can see any dimension also

[@CADxTraining]

Some of the things doesn't work in creo 3.

[@prashantsanghvi9087]

PCD Axis not showing on Model

[@CADxTraining]

You can watch this. kzbin.info/www/bejne/p3SrmJSXotuZgdE

[@prashantsanghvi9087]

@@CADxTraining Thank you sir, i have got it

[@prashantsanghvi9087]

i have another problem of Limit set in creo 3.0 in your video 45.4 and 45.6

[@logeshlogesh375]

Brother is there any other way for give detail view in smooth curve

[@CADxTraining]

Creo parametric doesn't have any direct way to do this. This is the only way we do.

[@RAHULSINGH-ci9zr]

Can i have the detail file

[@suhanyt730]

Thank you explain

[@harikumark6371]

Can you please share detail file with us? So that it will get better finish to our drawings.

[@CADxTraining]

You can take snapshot of the drawing given in the video in HD resolution.

[@harikumark6371]

Thanks for suggesting 😊

[@kbnchannel1991]

Sir how to make solid view to drawing view color remaince same.

[@CADxTraining]

That can be easily done using view properties in creo parametric

[@kbnchannel1991]

@@CADxTraining Thanq sir

[@kbnchannel1991]

@@CADxTraining one more thing you making hole numbers and degree with combine and dimension in brocket and limit tolerance and symmetric tolerance not possible in credit 3.0 how can I sir please

[@kbnchannel1991]

This is not possible in creo 3.0 please tell me other way

[@CADxTraining]

In creo 3 go to the drawing properties and activate tol_display before adding the tolerance to the drawing.

[@itsatharv]

Name of part sir?

[@shivamohan632]

Sir please make some videos for GD&T

[@CADxTraining]

Must watch. kzbin.info/www/bejne/Y2TXf2qBq6mIoLM

[@lekhank6106]

sir can i get the drawings for practice work

[@CADxTraining]

Why can't you take a snapshot from the video

[@lekhank6106]

@@CADxTraining already took that...ty

[@basavaganesh9088]

please make more videos regarding GD&T

[@CADxTraining]

Have you seen this? kzbin.info/www/bejne/Y2TXf2qBq6mIoLM

[@jayraghav4176]

Hi , sir can you please share notepad files for creating seting

[@dharmasagarpatil8485]

Thank you Sir!

[@मेरी_दुनिया]

Really helpfull

[@krystalvang9659]

good

[@arnabpaul1804]

Thank you Sir

[@meharsamba]

Holy shit. Thats good

[@wrussum1]

I'm going to abandon your channel. You lost me when you changed the scale to 1.5. You did not specify to double click and it took me a very long time to figure out why I didn't get the dialog box. I'm a SolidWorks user trying to come up to speed on Creo for my livelihood (a new job).

[@koushikcell6436]

getlost ads

[@ziven22]

Hate this program with a burning passion.