Calculating Complex Material Volumes using Subcriteria in Civil 3D

[@pchander100]

Jeff, you are god-sent for C3D users. These short, informative videos are packed with useful information.

[@JeffBartelsCAD]

Wow, thank you so much! You made my day!

[@yac21]

I confirm, i follow him since 2005 iknow all i know in Autocad by whachig his cours even at that time i didn't understand anything in English

[@jacobfreese47]

When you are feeling like something is not achievable in Civil3D, just browse his videos and there is almost always a quick video solution! Struggling to calculate complex road quantities and this was exactly what I needed

[@ABDBEK2000]

Great content! Thank You Jeff. Really always unmatched tutorials. To the point, clear and extremely helpful.

[@stevedavidson8856]

As usual you’ve given us another great tool, thanks Jeff

[@JeffBartelsCAD]

So glad to hear the content is helpful! Thank you Steve!

[@deviprasanrath693]

Hey Jeff, great tool that you have explained properly, Cheers !

[@JeffBartelsCAD]

So glad to hear the content was helpful!

[@kato_emmanuel]

Much thanks Jeff you have really saved me

[@JeffBartelsCAD]

You are very welcom!

[@malyartalash760]

Great Sir, I am following all of your video as these are very useful in my daily road design activities.

[@JeffBartelsCAD]

Thank you Malyar!

[@syed.arsalan27]

This was a great video like other videos. For beginners and also for advance one.

[@JeffBartelsCAD]

Glad it was helpful!

[@syed.arsalan27]

@@JeffBartelsCAD it was very helpful.

[@syed.arsalan27]

Sir I was looking for this kind of video. And i am waiting for your new videos. And i always checking your channels for new videos like this.

[@JeffBartelsCAD]

Thank you so much for your support!

[@pit7187]

Jeff. Thanks for your valius apports. Thanks

[@carloschuecos7014]

Super excellent!, as I have always said about your videos. Thank you Bartels

[@JeffBartelsCAD]

Thank you Carlos!

[@billalmallaoui9385]

Thank you Jeff for all these informations

[@JeffBartelsCAD]

My pleasure Billal! Thank you for your support!

[@arturoguzman6812]

Thank you very much Jeff, very VERY helpful

[@hamidsalehi8568]

Great work jeff. But how did you get those unsuitable surfaces? And is there any way we could access the files of these videos? It would mean a lot to me. Thanks for the great work 👍

[@clarmanpacuma8113]

Hi jeff, on your video shows computation of surface to surface.how about to compute surface passing through various corridors or structure?please help me with these.thank you so much.

[@ahmedkamel9342]

Wow, magnificent as ever Thank you very much for your great video

[@juancdrg]

Hi Jeff, how to solve "Nan" value when volume report?

[@shehabmahmoudabdelwahab1254]

Thank you ,but how can add quantity of material to another in tables with cross sections ?

[@tiffanypersaud3518]

Thanks! You saved me!

[@JeffBartelsCAD]

Glad I could help!

[@kaackster]

Is it possible to extract the quantities separately by sub-category instead of all unsuitable material? and show that in a table.

[@JeffBartelsCAD]

Yes, to extract the quantities separately you would define each one as a unique material having (if needed) their own subcriteria definitions. The extracted report would list the volume calculations for each defined material. If you'd like to view the table data in the drawing, this video kzbin.info/www/bejne/rWTHdYuhrt58aJI may help.

[@moffatinosi7132]

I would like to know how you created all those surfaces especially the unsuitable ones??

[@lazarradojevic7556]

Hi Jeff, is it possible to create one video where you show how to handle pasted tin surface? I want to find a quick solution for overlapping models. How can you choose which slopes you want to keep, where should the two slopes different models be pruned etc?

[@yac21]

Great Great Great thanks again

[@hanomahmood5947]

You r always best

[@JeffBartelsCAD]

Thank you Hano! I appreciate it

[@CNCRHE]

I wish this video existed before 2010 when i had a hard time understanding why complex overlapping materials disappeared when adding criterias.

[@tristanmancol3200]

hi sir jeff can you make video tutortial making assembly using polyline.

[@spartan.HOCOPOG_0011]

Hello Sir. I am a Takeoff clerk. I want to know if there is a way to obtain every cut and fill quantity with Civil 3D ( for commercial projects, restaurants, autoparts stores,etc) needed for an estimation. Like, if I have a PDF or TIFF, can I trace existing vs proposed, and obtain quantities?

[@ahmedshaaban6361]

What is name of the font you are using, Sir?

[@richardwilmarsalascaballer8746]

Muy interesante aquel tutorial, por favor podrías realizar un video similar con el método de comparación de superficies (superficie de terreno inicial, superficie de diseño y superficie de avance en movimiento de tierras), me ayudaría mucho porque tengo un caso de movimiento de tierras masivo. Espero puedas leer mi comentario, saludos.

[@Chubbbs117]

Very useful, thank you.

[@JeffBartelsCAD]

Glad to hear that!

[@hosamadam5377]

your videos are like a (civil3d juice) extraction.

[@zubairhayat8407]

how Takeoff excavation quantity according to Depth Criteria

[@melisagustafsson3414]

is it posible for you do drop a Zip file so i can play around with the data?

[@MrJamesmac1200]

Just create yourself some simple subgrade surfaces using feature lines. Use these surfaces to represent your subgrade materials.

[@toyotahonda8921]

How to calculate volume correction in civil3d

[@ojaracharles4877]

Thanks for the video much credit, i need your help, wanted to calculate bush clearing and grubbing, top soil but the two surfaces mentioned didnt touch the original ground in some other sections. is there any way i can adjust the two surfaces individually to touch the OGL

[@DrEng_Sinan]

Thank you very much

[@JeffBartelsCAD]

You are most welcome! Thank you for your support!

[@JesusBuenaventuraGranda]

BUENAZO