HOW TO USE A RAMSET GUN

[@Caliber8Tools]

Join the Caliber8 Tribe to get a free ebook on 10 simple ways to beautify your home plus more home improvement and diy tips- join.caliber8.com Get the Ultimate Utility Bag use coupon code Tools- www.caliber8.com/product/caliber8-ultimate-utility-bag/

[@barbaramix1683]

I am glad someone is covering safety protocols for this equipment. Most channels just show you how to use equipment. It is important to be safe Thank You.

[@Caliber8Tools]

Thanks for the feedback. Glad it helped.

[@assili_abdellah]

Thanks a lot sir , your explanation was so good, i learned lot of information from your video, very nice work

[@Caliber8Tools]

Thank you, glad it helped.

[@rschwinn492]

Thank you so much for an easy to understand and comprehensive guided instruction on how to use my tool. Your knowledge is greatly appreciated!

[@Caliber8Tools]

Glad it helped.

[@ManInTheBigHat]

Best video on the subject. Nice and thorough. Thanks. I had no idea those nails could go through steel. Damn!

[@Caliber8Tools]

Glad it helped.

[@KeturahTori]

you explanation made me feel more comfortable with this tool, thanks

[@Caliber8Tools]

Glad it helped.

[@sasori1816]

Great video sir, just what I needed.

[@Caliber8Tools]

Glad it helped.

[@kristmanneisson4901]

Enlightening, well cut, and true. Good job 😊

[@signality]

Thank you for making this! This is exactly what I was looking for!

[@Caliber8Tools]

Glad it helped.

[@SuperDudson]

Really, really well done. I will be sure to stop back!

[@Caliber8Tools]

Thank you. Glad it helped.

[@redsharkfate1907]

Thank you for the video sir! I’ll be using one for the first time and I truly wasn’t sure how it works

[@Caliber8Tools]

Glad it helped

[@pedrosergiom]

Very good explanation, thanks for the time you put into this video 👏🏽👏🏽👏🏽

[@Caliber8Tools]

No problem. Glad it helped.

[@BenM81]

What a fantastic explanation. Great video. I appreciate it. 👊🏻

[@Caliber8Tools]

Glad it helped.

[@londonpickering8675]

Thanking for taking the time to post this...

[@Caliber8Tools]

Glad it helped.

[@jimmeymcgee2840]

Thanks I need all that information I enjoy all your videos stay safe my friend 👍🏾

[@Caliber8Tools]

Thank you. Be safe as well.

[@danielestrada8835]

Very good explanation

[@core251]

tanks for vid. sry bad typng lost 4 fingers tryng to figgur mine out. wrking good now

[@Caliber8Tools]

lol. Glad it helped.

[@peterfejarang6677]

Very good instructions!

[@Caliber8Tools]

Glad it helped.

[@michaelwells7348]

Thanks for the Content Bruh. Although ive probably driven 1k of these fasteners over the years ~ I just bought a new .27 cal version & its a good reminder for safety protocols ~ if a 16 can come back at U from a Nail gun.... A Ramset nail could do the same ... its Never Happened to me ~ But my new Tool does have a lot of Kick to it ~ So thanks....

[@Caliber8Tools]

Anytime. Glad it helped.

[@caymanwest4929]

Excellent presentation! Safety first and sharing the associated parameters metrics was first rate. Well done. Thank you

[@Caliber8Tools]

Thank you. Glad it helped.

[@RobertSnyder-b1x]

Great and well done video

[@Caliber8Tools]

Thank you. Glad it helped.

[@christcrucified6385]

Great Job man!

[@Caliber8Tools]

Thank you.

[@JesusRamos-1224]

Good job,excellent.

[@Caliber8Tools]

Glad it helped.

[@spongebob6216]

Thanks for the video it was great on how to use the gun . But the heat treating makes the metal nails harder not resistant to heat

[@Caliber8Tools]

Glad it helped.

[@albertoromo2012]

thank you man great lesson

[@Caliber8Tools]

You’re welcome. Glad it helped.

[@DM-bx1zv]

Excellent video

[@Caliber8Tools]

Glad it helped

[@jgehbinv]

Great video! I have the Ramset gun. Need the fasteners and loads. Application: secure 2"x2" board to brick piers that support my back deck. Once secured I want to attached lattice to the boards to fill in gap between piers. To do that, based on this video, used the GREEN powder loads with 3" orange fasteners? Thanks!

[@Caliber8Tools]

That’s about right.

[@DearTkeyah]

As a woman that doesn't know what shes doing... this video was helpful. I was recommend to use one of these to cover the vents in the crawlspace of my home with hardware cloth to keep out rodents. I have 23+ to cover. Any advice?

[@Caliber8Tools]

A ramset gun is good if you are going to be attaching the cloth to concrete. If you are attaching it to wood use a heavy duty stapler

[@RobertHoskins-m9o]

I would like to mount 1/2 plywood to a brick interior wall. about 6 or 7 plywood sheets. Can you mount these with pns that wont have the rubber exposed on the pins? I could use tapcons but it would be more painful. thx.

[@Caliber8Tools]

As long as the pin heads are big enough to keep the plywood on the wall.

[@yataid2011]

Thanks for your show and information

[@Caliber8Tools]

You’re welcome.

[@petercavaciuti571]

Have used on site before but was not given as comprehensive an instruction before use as this video, thank you for posting

[@Caliber8Tools]

Glad it helped.

[@cassandradavis1198]

Amazing video.... Thanks for creating. Friday, May 10, 2024

[@Caliber8Tools]

Thank you. Glad it helped.

[@MarciMorgan]

Can you use the ramset to anchor a fence bracket to concrete?

[@Caliber8Tools]

Yes.

[@milindkamat399]

Can it be used to fix fibre glass composite to concrete piles underwater

[@Caliber8Tools]

They do have underwater ramset style fasteners that can be used on fiberglass.

[@eduardovillanuevaed3528]

thank you

[@Caliber8Tools]

Glad it helped.

[@danielmilliken1684]

I'm interested in fastening some simpson L brackets to the 1/4" flange of a large steel I-beam. The brackets would be then be screwed to joists that the beam will support. The brackets will not bear weight, only lateral forces. Would this work for my application?

[@Caliber8Tools]

Yes it would.

[@tomreynolds7769]

Nice job.

[@Caliber8Tools]

Glad it helped.

[@franklinhidalgo3683]

Could I shoot it upward? To attach wood to concrete

[@Caliber8Tools]

Yes.

[@biginoob312]

I want machine

[@jimcervantes5659]

You stayed 3" away from the left and right side of the concrete, but not the top and the bottom. Can you elaborate on the restrictions?

[@Caliber8Tools]

You’re right. I should’ve specified the top and bottom edges. I simply pointed out the left and right edges for the sake of instruction based on the prop I used. Good catch.

[@vintagepowderactuatedtools9036]

Same spacing to top and bottom. Fasteners should always be at least 3 inches apart.

[@msmith1319]

What about using it to fasten thin material to a concrete block wall? I'm guessing the fastener would penetrate the wall. Is that okay?

[@Caliber8Tools]

It would penetrate the wall.

[@jarodeldridge8935]

You forgot to say fire 🔥 💥

[@Caliber8Tools]

Haha, Fire.

[@garyevans9710]

That made me want to think long and hard about this tool

[@Caliber8Tools]

lol. Yes, it’s nothing to play with.

[@josephkingston9252]

The board was cracked and the steel bent

[@Whosurdaddy71]

That’s not welded 😂

[@sciCHD]

It's way too slow

[@Caliber8Tools]

Is it, compared to what?

[@sciCHD]

@@Caliber8Tools Spit Pulsa 800+ (Gaz 1battery). 2 round per second 1000 round an hour, 50 nails charger, 100 joules power up to 40mm nails. kzbin.info/www/bejne/fpXUiZtqj7Z8nqM