Cam Cover Gasket Replacement MG ZR Rover K-series

[@barryo9693]

Thanks so much, gave me the confidence to change the gasket on my ZR 120

[@TheLegendMaster]

This was really helpful, Hayne's made it sound really involved but I'm sure I can do this. Thanks for filming it!

[@bradwalton7599]

No problem thanks for the comments

[@tescooffical7175]

Just about to do mine on my 160. Never done it before so thought I'd look it up.

[@rhyschampkin9223]

Great video! Doing it on my 1.8 ZS very soon. No sealant needed or anything?

[@bradwalton7599]

I only fitted the gasket no sealant was needed

[@rhyschampkin9223]

@@bradwalton7599 Awesome thank you!

[@stephenhurst9257]

OK not being funny but how did thst cover remove -when on video u ddnt take out the Screws ? Yes we know but what was point in skipping thst out? ??

[@bobthomson3500]

About to do mine on a 1.8T. Did you torque the cam cover back down? Manual says 10N/m, but a few people have said this can break the bolts so I've ordered new replacement stainless bolts.

[@bradwalton7599]

I used the old bolts tightened the bolts by hand don't have a torque wrench that goes down to 10nm still no leaks. if you have a torque wrench that reads 10nm I would use it.

[@garygreenwood6752]

Nice vid mate, got to do mine soon

[@bradwalton7599]

Pretty easy job to do.

[@garygee4975]

2 years later, just got around to it 🤣🤣

[@DJ-JAY-Q]

Do the new head gaskets last forever on the mg zr ?😊

[@bradwalton7599]

Not sure the MLS ones I hear are much better

[@Jose-kv3go]

Very good gasket no problem?

[@bradwalton7599]

The car did about 300 miles before lock down and no signs of a leak.

[@Jose-kv3go]

Ok very good thank you

[@Jose-kv3go]

And the cylinder head gasket below you changed too?thankyoy