Camel T7 Fairings

  Рет қаралды 10,497

Camel ADV

Camel ADV

Күн бұрын

Like most ADV and street bikes, the T7's body panels are from ABS plastic which can crack with even minor impacts; that's less than ideal on an ADV bike!
Like many T7 riders, we were waiting for one of the big plastic companies to start producing Tenere panels but no one was doing it... so we did!
Our T7 side fairings are made from the same plastic that is used in dirt bike fenders and fairings which is far better suited for your backcountry adventures.
Our fairings are:
-Direct bolt-on replacements, easy install!
-Significantly more durable than the factory ABS panels
-About half the cost of OEM replacement panels
-Guaranteed against cracking for 3 years; if you break it, we will replace it for free*
-SOLD IN PAIRS
Are you adding a decal kit to your bike? Wrap these fairing instead and keep your OEM parts shiny and new for increased resale value!
Shipping, taxes, duties etc on replacement panels is the customer's responsibility.
**These panels are bare plastic; they have no paint or decals. We cannot guarantee an exact color match to your bike's other white or black panels!
***International Customers: (outside the US and Canada)
All extra fees such as taxes, duties, tariffs, brokerage, etc are not included in the purchase price. Customers are wholly responsible for the payment of these fees!

Пікірлер: 111
@jerdman10
@jerdman10 10 ай бұрын
Just do a full plastics kit. Panels, rear, fork guard, fender. I'd pre-order.
@RedEmpire36
@RedEmpire36 9 ай бұрын
Very surprised acerbis never did
@BuckyUSA
@BuckyUSA 9 ай бұрын
Also the center tank area
@gbner9991
@gbner9991 10 ай бұрын
Amazing. Great to see that an alternative for body panels finally exists. The fact that no other company offers anything like this after 5 years of T7 existence really is surprising. Nice job...
@alrightdave6135
@alrightdave6135 10 ай бұрын
4 years
@RedEmpire36
@RedEmpire36 9 ай бұрын
​@@alrightdave6135year prior in European markets so been out for 5
@ikutiap5923
@ikutiap5923 9 ай бұрын
19,20,21,22,23.. soon 24
@Nerb1
@Nerb1 10 ай бұрын
Awesome. Are you going to do the plastic tail peice? Those rear side peices are the ones I keep breaking.
@CamelADV
@CamelADV 10 ай бұрын
The rear panel is huge and the mold would be approaching $80-100k. We'd need to sell a pile of the panels to cover that cost.
@ikutiap5923
@ikutiap5923 9 ай бұрын
​@@CamelADVI would order it immediately.
@ikutiap5923
@ikutiap5923 9 ай бұрын
I, too, would order it immediately!!!!
@craigdixon439
@craigdixon439 3 ай бұрын
@@CamelADV What about doing the rear in sections, side panels and rear end. I'd buy them.
@OgreMoto
@OgreMoto 10 ай бұрын
Just bought a set! I was literally just thinking about this a few days back. “Man if I had cheaper, more durable fairings I wouldn’t bother buying crash bars”. And here you are with this product!!! Camel ADV is the GOAT! You can bet your ass I’ll be reviewing these on my channel as well! Thank you so much for your hard work! Now I can take off my pristine OE fairings and put on the cheaper, stouter ones and not worry about crash bars!!
@donut3110
@donut3110 10 ай бұрын
That's badass. Pretty soon you'll be selling a whole bike after all lol have to change that disclaimer to "yes you are finally getting a T7" 🤣
@adaptableadventurerider
@adaptableadventurerider 4 ай бұрын
Darn this is brill! We just got our first T7 last week an im a relucant green laner, sold a 300 rally when i stopped enjoying it, went out on the T7 on friday an really enjoyed it. An found myself on a green lane within 30 mins having lots of fun. An didnt find the T7 top heavy so been keen not to fit crash bars after watching Pavlins videos on Motorcycle Adventures where he took his off, so this is a brill solution :)
@daryushdonyavi4503
@daryushdonyavi4503 10 ай бұрын
Heck yea Cory! I’ve been waiting for someone to make these! Glad it was you.
@ApocalypseNouille
@ApocalypseNouille 10 ай бұрын
Excellent, I'll have to buy a set as a spare! You guys have your fingers on the pulse, for sure.
@IEGastaldo
@IEGastaldo 10 ай бұрын
This is great! Thank you guys for always coming out with these awesome accessories & replacement parts for the T7.
@trevsockman8073
@trevsockman8073 10 ай бұрын
Dammit, another Camel product I need. Lol Seriously though thank you, I’ve been waiting for this to be made for the T7 since the beginning. You’re going to sell a ton!
@mra3683
@mra3683 10 ай бұрын
thank you for doing it! I always wondered why no manufacturer dared to do it since many people are afraid of breaking their bikes and fill them with bars and extra weight. I'll give you my money!
@Catch22iscrazy
@Catch22iscrazy 10 ай бұрын
AWESOME! I’ve been wanting this forever! Already asked your uk importers when they’ll arrive
@ufixit
@ufixit 10 ай бұрын
Crash bar sales are going to tank. Hope you have a warehouse full of them. You are going to need them.
@CamelADV
@CamelADV 10 ай бұрын
I don't think the crash bar manufacturers have anything to worry about!
@slowy_9355
@slowy_9355 10 ай бұрын
This is awesome , would love a full kit :) This would have saved me the money for my crashbars ! Definitely wanted to ride without but with the oem ABS it wasn't an option.
@DamonStangherlin
@DamonStangherlin 10 ай бұрын
Yet another item to contribute to the list on why Camel adv is the goat🤘🏻 Would love if you made 7/890 ones as well in the future, I know a guy that needs new plastics😅
@everythingtenere
@everythingtenere 10 ай бұрын
There we go, very nice Cory
@comfortablyunknown700
@comfortablyunknown700 10 ай бұрын
Wow!!! That is so AWSEOME!! I have been going back and forth about crash bars. I also love the slim athletic look. The price tag on bars also makes me hesitant to getting them. THANK YOU CAMEL ADV!!!
@DirtbagonWheels
@DirtbagonWheels 10 ай бұрын
Perfect I f***ed up my on last weekend at a enduro maxi race, need it!
@Afrikaaner72
@Afrikaaner72 10 ай бұрын
Now we need the T7 World Raid fairings!! ;)
@glencomeaux836
@glencomeaux836 10 ай бұрын
Totally awesome Cory!
@GVH5150
@GVH5150 9 ай бұрын
Just installed them - they are awesome and fit better than the original fairings
@epmrealtyericmccormack6534
@epmrealtyericmccormack6534 10 ай бұрын
Awe man I thought I was done adding parts to my T7!!!!!
@CamelADV
@CamelADV 10 ай бұрын
We have more coming too 🤘
@colin20cal
@colin20cal 10 ай бұрын
​@@CamelADVCory, my wife will divorce me if Camel ADV produce any more T7 parts. Keep up the great work mate. 👍🏻
@charlescummings1484
@charlescummings1484 10 ай бұрын
Shazam! More Jewels from Camel ADV ! Thanks! from Connecticut, U.S.A.
@elderrider9298
@elderrider9298 10 ай бұрын
Great to see another Camel product :)
@luisgomes9991
@luisgomes9991 9 ай бұрын
Hello, what great news, now all that remains is the development of a tank with the original capacity but in plastic, a continuation of this spectacular work. greetings from Portugal
@skiphalbakken6499
@skiphalbakken6499 10 ай бұрын
Holy crap! I have been waiting for this! Way to go!!!!
@RugerM77
@RugerM77 10 ай бұрын
Very cool. Great job!!! 🎉🎉🎉
@elionh4532
@elionh4532 10 ай бұрын
Cant beat that deal
@tarasb.ukrainian1947
@tarasb.ukrainian1947 10 ай бұрын
Got crash bars.... but if i ever need a replacement, i know where to go
@Gwiedert
@Gwiedert 10 ай бұрын
Awesome! Now I need you to make the rest of the covers too. They all brake😂
@markymark2967
@markymark2967 10 ай бұрын
FINALLY. I've got chunks missing by now
@turinhorse
@turinhorse 10 ай бұрын
Awesome. I have crash bars but might still get these and add graphics
@Drzzlt
@Drzzlt 10 ай бұрын
"Like many T7 riders, we were waiting for one of the big plastic companies to start producing Tenere panels but no one was doing it... so we did!" based chad 👍
@CamelADV
@CamelADV 10 ай бұрын
I'm too old and lame to know what "based chad" means so I'll smile and nod 🤣
@Drzzlt
@Drzzlt 10 ай бұрын
@@CamelADV haha thats the right response
@defylifeadventure
@defylifeadventure 10 ай бұрын
Nice work. Don't even have a T7 but it's good to see companies coming out with options. Shame you don't have a set for the Versys 300, and a few other bikes with rigid panels.
@rickybobby1055
@rickybobby1055 10 ай бұрын
Thats pretty awesome. If my oem pieces break i will put an order in.
@slakk5093
@slakk5093 10 ай бұрын
Better to buy these and put your oem panels in a cupboard somewhere. If you sell your bike years later, but oem panels back on for better resell value
@rickybobby1055
@rickybobby1055 10 ай бұрын
@@slakk5093 that is a valid point. For me though i dont fix what isnt broken.
@RiflemanSE
@RiflemanSE 10 ай бұрын
Awesome!
@backcountryadvmoto
@backcountryadvmoto 10 ай бұрын
Wow, so awesome Cory. Once again making shit that fixes the problems.
@CamelADV
@CamelADV 10 ай бұрын
It's what I love to do!
@Wuffiful
@Wuffiful 10 ай бұрын
Well, me being from Denmark just have to wait on till they show up in Europe then 😉, but good job bin waiting for that 😁
@stevenduhaime1484
@stevenduhaime1484 10 ай бұрын
I’m stoked. I’d like a blue, but I suppose this will work better with a fuel tank upgrade since they’re mostly black.
@maddog6243
@maddog6243 10 ай бұрын
Already bought.
@CamelADV
@CamelADV 10 ай бұрын
Thanks for your business!
@CzTifus
@CzTifus 10 ай бұрын
Hell yeah!! 🎉🎉
@ryankroeker8934
@ryankroeker8934 10 ай бұрын
Nice!!
@kenbing8
@kenbing8 10 ай бұрын
F-yes!
@yorkchris10
@yorkchris10 10 ай бұрын
I'm surprised a hole has been left in the accessory market for this bike. The World Raid will rely on thick graphics kits I guess.
@mabanob682
@mabanob682 10 ай бұрын
Nos vas a arruinar a todos!!! Buen trabajo.
@tam410
@tam410 10 ай бұрын
Dear Yamaha, if you will ever update the T7, please take Cory into your development crew.
@SuperCheesyMan
@SuperCheesyMan 10 ай бұрын
Nice can we get the same treatment for the Tuareg 660?
@Kingsmanly
@Kingsmanly 8 ай бұрын
Anyone know if these fit with the Acerbis 24L tank?
@reneweisz9157
@reneweisz9157 10 ай бұрын
It would be great if you could fabricate the fork protection fenders. Not only do they crack super easy but you can never buy them in the US, They are contantly out of stcok
@rodirsno
@rodirsno 10 ай бұрын
Pls make us some for our 2019 Africa Twin 🥺
@northof49adv
@northof49adv 10 ай бұрын
Nice If you do the same for CRF1100 , I can remove my crashbars !
@peterlv
@peterlv 10 ай бұрын
I like idea of not running crash bars, but then is there a risk of bending radiator if they are not there or something else or they are there purely (90% at the time) to protect plastics only? Thank you for making great products!
@gbner9991
@gbner9991 10 ай бұрын
this is my only fear when not running crashbars. I wonder if these thicker panels can prevent damage to the rad if there was a rock in the wrong place...
@OgreMoto
@OgreMoto 10 ай бұрын
You can replace the radiator 2-3 times before you get into the cost of most crash bars. Plus crash bars put extra stress on where they mount so you risk breaking other things as well. That, and running crash bars doesn't guarentee you won't break anything. If a rock, stump, or log goes through the opening of your crash bar you're breaking something anyways. They kind of provide a false sense of security to some extent. The T7 is very narrow compared to most ADV bikes so it's unlikely that you'd break anything other than the panel on a drop, but all crashes are different and anything is possible.
@peterlv
@peterlv 10 ай бұрын
@@OgreMotoThere is difference in cost both monetary and time if, for example, I need to replace radiator or any other part that was broken because I decided not to run crash bars 50 miles from home or 1000 miles from home. The latter is always more painful as you are in unfamiliar setting far away from home with parts availability possibly questionable, but still a need to get home. I have had some good slides on stock crash bars and 0 issues, I am not saying they can't damage other parts on bike - sure they can, but what is more probable, that's the main question. I do understand that nothing is guarantied, however question what risks I am exposing myself if I don't run crash bars is important to me, and I am talking about real and probable risks, not hypothetical once in a blue moon scenarios. I am often in places that are far away from city, so this is important to me.
@gbner9991
@gbner9991 9 ай бұрын
@@peterlv I kind of agree. It seems CamelADV is building a rad-brace to protect the radiator without crashbars. I still wish this bike had some integrated plastic crash protection of some kind, like the old KTM 990 or the new KTM 890 fuel tank covers. Something that protects the most vulnerable spot without big metal bars.
@nomadon2wheels
@nomadon2wheels 10 ай бұрын
I love this! my Farings are destroyed since I've been on the road. Front and rear. Do you plan on having a rear faring set as well?
@CamelADV
@CamelADV 10 ай бұрын
We haven’t made any decisions about the rear section yet. The mold would be huge and it would cost $80-100k USD. We’ll have to sell a pile of panels to just break even.
@nomadon2wheels
@nomadon2wheels 10 ай бұрын
ok got it, thanks@@CamelADV
@nemerkha
@nemerkha 10 ай бұрын
Excellent! Will you be doing some for the World raid please?
@CamelADV
@CamelADV 10 ай бұрын
No plans to at the moment. The WR numbers aren't nearly as hight as the standard bike (at this point anyway).
@nemerkha
@nemerkha 10 ай бұрын
@@CamelADVfair enough. We share the same tail as the standard T7, so maybe a tail end then? Pretty please?
@KairyuRider
@KairyuRider 4 ай бұрын
When are you making these for the Transalp? Should I wait or get crash bars in the meantime?
@ADVRider78
@ADVRider78 10 ай бұрын
Great idea. On another topic will you be looking at offering parts for the Vstrom 800DE?
@CamelADV
@CamelADV 10 ай бұрын
Undecided at this point. We're busy with a bunch of other projects at the moment, time will tell!
@tdr30
@tdr30 10 ай бұрын
There are something like ten plastic panels on the T7. The tabs are crap, most of them have failed on mine, and its only two years old. I'm sure not gonna buy OEM replacements that are gonna fail just the same. Bad design, bad material. I'll give these a try when the time comes.
@ridewherever
@ridewherever 10 ай бұрын
Will you eventually do the back fairings too?
@CamelADV
@CamelADV 10 ай бұрын
The rear panel is huge and the mold would be approaching $80-100k. We'd need to sell a pile of the panels to cover that cost.
@ridewherever
@ridewherever 10 ай бұрын
@@CamelADV oh wow, goes to show how much I know about making fairings lol
@BuckyUSA
@BuckyUSA 9 ай бұрын
@@CamelADVhow does a mold cost 80 to 100 thousand dollars? We would want the full complete fairings so they color match.
@Nico-bj9br
@Nico-bj9br 6 ай бұрын
Love Camel ADV and would happily buy these. Would it be cheaper to break it down into 3 parts like RTech does? @@CamelADV
@Max-xr4nl
@Max-xr4nl 10 ай бұрын
Sounds ridiculous but I’m currently trying to find side panels for my xt600 and thought these might work, would you be able to tell me the dimensions between the top and bottom mounting holes? If these are a similar size I will be ordering them ASAP. Cheers.
@The333
@The333 10 ай бұрын
Cory, you are the f--king best in the business, dude! HERE'S MY WALLET!
@CamelADV
@CamelADV 10 ай бұрын
Thanks for the encouragement!
@jacbosmitt
@jacbosmitt 10 ай бұрын
I'd love to ditch crash bars, but how do you keep from busting a radiator if you dont have crash bars and drop the bike on rocks? Awesome design though, I've always said its dumb for these off road oriented adv bikes to have hard brittle plastics
@jurgenklo5714
@jurgenklo5714 10 ай бұрын
did you not have Heed bars on it for a long time?
@CamelADV
@CamelADV 10 ай бұрын
They were off and on… more off.
@skiphalbakken6499
@skiphalbakken6499 10 ай бұрын
Are you guys thinking about making windscreen pieces also in solid white? And the rear tail piece? Thanks. Also, just an idea ,to make a camel adv. emblem to go where the Yamaha emblem goes so that we don’t have to order a Yamaha one.
@CamelADV
@CamelADV 10 ай бұрын
No plans for windscreen pieces as they don't seem to be an item that breaks regularly. The rear tail section is f'n huge and the mold needed would be $100K or more so it's unlikely at this point... never say never. The fairing kit has two 3M double-sided tape circles to reattach the OEM emblems. We might make Camel emblems in the future but nothing is in the works at the moment.
@skiphalbakken6499
@skiphalbakken6499 10 ай бұрын
@@CamelADV Thanks, yeah I know that those injection molds are expensive!
@Gwiedert
@Gwiedert 10 ай бұрын
​@@CamelADVPerfect fairings used to sell these too. Perhaps you could buy their mold? Not sure why they stopped producing them.
@CamelADV
@CamelADV 10 ай бұрын
@@Gwiedert If they spent the time and money on molds then stopped making them, there's a good reason. We have fuel tanks like that... they simply don't sell in the volume they need to to make it feasible.
@nathanandafewbikes
@nathanandafewbikes 9 ай бұрын
Will you be making these for the world raid? Cheers
@franko4416
@franko4416 10 ай бұрын
Hey Cory, will it be available in your europe distributors soon? :)
@CamelADV
@CamelADV 10 ай бұрын
When they order, we’ll ship!
@franko4416
@franko4416 10 ай бұрын
​@@CamelADVi'll help you with that by sending mails to them 😂
@pauljames1762
@pauljames1762 10 ай бұрын
Do these fit all years to present on a standard t7??
@CamelADV
@CamelADV 10 ай бұрын
They do.
@4f00d
@4f00d 8 ай бұрын
cmon put link in the description
@scrambledpegs2202
@scrambledpegs2202 10 ай бұрын
Hot cakes 🥞 !!
@brianq103
@brianq103 10 ай бұрын
Cory, how much of a discount for the one in the video? 😂
@CamelADV
@CamelADV 10 ай бұрын
😅
Yamaha Tenere 700 - Long Term [66,000km] Owners Review
20:11
Motorcycle Adventures
Рет қаралды 148 М.
CameL ADV High Exhaust T7 Install
19:21
Camel ADV
Рет қаралды 31 М.
Ouch.. 🤕
00:30
Celine & Michiel
Рет қаралды 14 МЛН
Jumping off balcony pulls her tooth! 🫣🦷
01:00
Justin Flom
Рет қаралды 20 МЛН
80 Year Olds Share Advice for Younger Self
12:22
Sprouht
Рет қаралды 1,6 МЛН
STOP Crashing Bikes in Corners // Part 1: The LINE
11:15
Moto Control
Рет қаралды 347 М.
The Straw That Broke The Camel's Back
13:55
Camel ADV
Рет қаралды 3,3 М.
We Drove The Beast // A 27-Liter V12 Spitfire-Powered Monster
22:27
Throttle House
Рет қаралды 1,7 МЛН
STOP Getting Scared in Corners // This Strategy Works Absurdly Well
8:42
How to pack an adventure bike
13:27
Adam Riemann
Рет қаралды 480 М.
The Motorcycle Part that Takes Two Years to Build
9:57
FortNine
Рет қаралды 779 М.
How To Paint Motorcycle Fairings (Tutorial)
8:47
How To With Kel
Рет қаралды 304 М.
700 Tenere Camel Tank Intro
13:59
Camel ADV
Рет қаралды 27 М.
5 Steps to Transform Your Off-road Bike's Handling
18:32
Adam Riemann
Рет қаралды 236 М.
Tuning a 270+whp Kawasaki H2R
0:13
Jahir motovlog
Рет қаралды 7 МЛН
Машина Жириновского.  #shorts Лиса рулит
0:52
Лиса рулит shorts
Рет қаралды 6 МЛН
БМВ М4 сожгли дети. Вся правда. Будем восстанавливать!
45:37
Мастерская Синдиката
Рет қаралды 1,5 МЛН
Bike trick and Bro's aura...
0:11
Banza Edits
Рет қаралды 9 МЛН
#vtx1800 #колесо #дтп  сложный ремонт диска
1:00
Глобус Мото
Рет қаралды 899 М.