Best Way To Mount Tires?

[@CameronNiemela]

Share your worst (or best) tire changing story! Mine is torching a tire off the rim because I was a noob and couldn't figure out how else to get it off haha.

[@superbenroy1]

Cameron Niemela took me 2h to get an old dry tire off a xr80 🤷🏽‍♂️ it was stuck so bad

[@koksaltskenneth]

I did angle grind it off :)

[@mtbridingog9083]

Cameron Niemela hey bro do you have a carb from cr125 or jets ??

[@mtbridingog9083]

Benjamin Roy dang bro

[@joshmx7161]

my first tire change ever on my xr100 i popped 2 front tubes and the back tire was so dry rotted i had to cut it off. i have gotten a lot better since then.

[@chrispewkreme]

Glad you showed the front! The rear is pretty easy. But the front, if you don’t know what you’re doing, is a difficult. That tool is awesome

[@ian9toes]

Credit to you Sir for owning up to that little scratch on the rim. It gives a warning to those who care about scratches, not me though I scratch them more while riding.

[@deanhuff123]

I got one of these tools last week. Holy crap it is a game changer!

[@H8er-Maker]

I've never seen a tire mounted before without using a single cuss word.

[@PBstx1100]

Haha so true

[@alexandergardner2396]

That looks so easy. My last change was terrible. After years of relying on mechanics I had forgotten about all the little tricks to make it easy. The sweat the poured off me was insane!

[@kymstock1852]

I carry this tool on my longer trips within an old sock in my panniers. The bike I was riding had a 17 " wheel and I had a Motoz Adventure rear tyre on it. Those are hard to fit, being stiff in the sidewall. You do need to practice using this tool. As luck would have it, I didn't get any punctures on the " Big Trip" but I did get to use the tool on other rider's bikes. My fee was one beer per tyre. On an 18 " wheel / smaller tyres I probably would keep this tool at home.

[@WibbyKDX]

Put baby powder in a garbage bag. Air tube just enough to take shape and place in bag and shake. It covers tubes perfectly and will work multiple times

[@rickfeith6372]

Your toolbox has all kinds of surprises...sweet looking wheels all finished up.

[@Cycle9568]

I just mounted up a D606 this month and it was so much easier with a Baja No Pinch. If you need a little extra help use a couple of bar clamps to squeeze the beads of the tire together.

[@Nostrildomus]

The no pinch will allow this old guy to do my own mounting again . Thanks for passing it . Another good presentation . . .

[@endlessprogression9543]

Damn that tool made it look so much easier and safer on the rim 👌 nicely done.

[@jwilson1500hd]

I ordered a baja and used it yesterday for the first time. At the last little bit it seemed to want to dig into the tire instead of pushing it down onto the rim. It was a gummy "cheater" tire. Maybe a regular tire wood work better or maybe it was user error. Tire was warm and i used plenty of lube, watched several vids and followed instructions still had to end up spooning the last bit onto the rim

[@Imthewestwelder]

Just to make it even easier, use the powder and apply to the tire/tube before installing👌helps to get the tube move in the tire instead of stretching. Love the videos. Being a mechanic I love seeing tools that make the process easier.👍glad your doing good.

[@justinfewkes3535]

Im going to get the tool but put a rubber coating / flex seal on the end to help form hitting my shiny rims thought I’d post this so other people can do it to.

[@Reqlayy]

Just got my Husky 125 fixed up, test drived it and aftert that Cameron just uploads a new vid, awesome. It's hella slippery in Finland though.

[@matiassavolainen1227]

Liukasta on

[@Reqlayy]

Varsinkin iltasin ku on tiet täysin jääs

[@matiassavolainen1227]

Just pistin derbii kii uuden takakatteen, ku heiti vähä lintas liikaa :p

[@Reqlayy]

Itel läks takarengas vetää sivuluisuu ku pääs piikille kakkosvaihteel, frendit sano et näytti vähä hurjalt ku rengas sai pitoo vast iha reunas :D

[@mathiassuomela8121]

Etelässä tiet ei enää jääs mut perkele ku oma husse sutii ku tota hiekkaa noilla teillä

[@John_Doe_6996]

Tried changing a front tire for the first time yesterday...got it 95% done, and then piched the damn tube...perhaps i should look into that tool your using

[@thareal1318]

Greatest moto youtuber I am always waiting on your next video and go into sadness when I finish one 😂 Can’t wait to see the next video!!!!

[@nomdeguerre13]

Black Rims look great, but show changing nicks and other stuff, so it goes. Appreciate your honesty!

[@Thundercat68]

Made it look easy. I hate mounting dirt bike tires, may have to look into that tool.

[@dirtbikevlogs5572]

Not watched the video yet already know it will be awsome

[@markkus1134]

Just changed my tires yesterday thanks for video That tool should have a hard plastic tip to prevent nicking rim

[@robertatkins272]

Awesome tool and awesome tire change video. I really appreciate the close ups and detail.

[@tomgordon4395]

Great Video, thanks for explaining about the proper position of the two nuts on the tube

[@jurajkovac1770]

Nice work, i am already working on dirtbike and then i will go and repair wheels as you did. This video brought me lots of inspiration.

[@AustinWoll]

I love the shot of the tire bead seating on the rim lol nice video work

[@tacokiller101]

I used to use that yamalube stuff but have went away from it and use just a lil bit of grease along the bead. If you let that spray lube dry it will skin over and you will never be able to scrub it off

[@PremixandPedals]

I had been mt biking for a few years when I bought another dirt bike. After changing mt bike tires for years I figured it would be just as easy on a dirt bike. Boy, was I wrong! After much cursing and sweating, I finally got the new tube and tire on....and then I found out I pinched the tube!

[@dixoncider7256]

nice, going to be changing my dirt bike tires next weekend. Thanks!

[@joel387ktm]

I always fill the tube up and let the air out a couple times to ensure there are no wrinkles in it before seating the bead and my worst story is busting my knuckles on the disc and sprocket getting the tire mounted but im pretty much the Michelin man now days with my skills lol

[@superbenroy1]

Can’t wait to see the final bike😍

[@operator1876]

i cannot wait for this build to finish...its killing me inside to know what the end result is!

[@bmx08]

Uma dica...Use esmalte de unha na cor preto para pintar pequenos reparos.

[@stiixbeatman]

Perfect, this is exactly what I was looking for !

[@alanferia3116]

Definitely gonna pick up one of those tire Mounting tools

[@brooxbowen543]

Those are the freshest wheels I have ever seen good job man keep it up 👊

[@HOLLOWPOINT71]

The second nut on the tube,heard so many different ways of using this,is the way you use it the proper way,w=hats the theory?

[@x0kuu]

That looks so easy! And those wheels came out really nice

[@randie450]

Some great tips for working on dirt bikes here! Loving this stuff wish I found this youtuber earlier, great work.

[@ianthompson043]

You make changing tires look fun, that’s really saying something…

[@craignilsson4473]

Sweet tool... You should try mounting a mousse.

[@jorgevizcarra4437]

When doing the rebuild for the Honda are you going to do a restyle kit if so that’d be an awesome video to see the fitment and how it’d look and thanks for the great videos keep it up

[@CameronNiemela]

I'll have to look into that kit some more when the time comes. Thanks for watching man

[@josemariaperez5600]

More interesting the tool. Good job Cameron.

[@jmudd5449]

Love watching your videos, I learn so much. Thanks keep on keeping on.

[@davidrestivo8598]

That is a must have tool. Great job

[@glennburling2713]

Please can you put that bike back together already it's killing me over here in England.!!!! Great vids and very informative keep up the good work.

[@Paradoxal-Gaming]

2 eggscelent videos! Vid where you assembled the spokes and mounting tires, i got some great tips!

[@TrailBoundco]

Do you think it would be easier to mount with one of the tire mounting stands with the bead breaker/press arm in conjunction with the Baja no pinch?

[@jordanbrower9402]

Freshest pair of wheels I’ve ever seen!

[@evanhord3038]

I can’t freaking wait for this bike to be done!!

[@PlayGameSafe]

Your videos are so useful, teached me a lot of things man. Now, time to practice on my own bike :)

[@nzzs203]

Were you ever teached grammar???

[@jaxonnolen3165]

N Z Z S you need to be teached grammar lol

[@PlayGameSafe]

@@nzzs203 Learn to think before you speak lol. English isn't my primary language lmao.

[@nathanmiller1324]

You make everything look so easy tho, good vids they help me a lot with my bike

[@giuseppedimezza8027]

Please give a link where to buy that pressure indicator!! Nice video btw

[@CameronNiemela]

Thanks! Tire gauge is here www.rockymountainatvmc.com/p/726/3040/Tusk-Low-Pressure-Tire-Gauge

[@kingmatthews5436]

I like the Motorsport website more. I just like how it’s set up and how easy it is to use but that’s just my opinion. Anyways nice video as always

[@pablocalderon555]

how are you cameron I hope you are well I have a question I would like to know if my motorcycle has the possibility of putting a thicker tire? the size of the rear tire 90/100/14 and the front is 70/100/17 so they originally come

[@CarsnStuff]

that tool looks so convenient

[@mrvolts9262]

I just got a set of tubliss always love your stuff my dude

[@konastinkykid]

Never knew that your supposed to leave one nut inside the rim. Good to know!

[@colesasso8877]

Your my inspiration for racing and your vids are dope af

[@jordanbates470]

Great video your really good at mounting tires with that tire tool

[@manuelriesen2536]

Another great video, sweet looking wheels man! When I got new tires and heavy duty tubes I was wondering why there are 2 valve stem nuts. What is the reason for one nut to be on the inside of the rim? I read somewhere that tubes are male so that's why they have 2 nuts...... made sense :)

[@CameronNiemela]

Ahahaha

[@robertlatham8361]

Man I'm gutted for you Cameron, you never know how something works best until you try it out a few times first .. hats off to you bud, I feel for your inner OCD. the rims are gonna get marked in anger anyways look forward for your next video !! regards from good olde Blighty

[@CameronNiemela]

Hahaha

[@donsimpson1976]

WOW very nice man..do you have an idea on the brand and color of Sprocket you plan to use with the rims?

[@CameronNiemela]

Not quite sure yet. Probably Renthal

[@MegaRusty64]

Hi… did you take your axle spacers out to get the Baja tire tool sitting on the hub or can you leave the spacers in place ??

[@timkuch2307]

How do you keep the tool down on the hub when prying and keep it from lifting up off the hub out of the axle slot?

[@lorenzoferrara8652]

cool but how will you remove the tyre without levers?

[@robertgisthebest]

I am restoring a 94 Kawasaki KX125 and the tyres were stiff as a board. I had to cut a section out of each tyre with a hacksaw and then cut through the beads with an angle grinder. The new tyres aren't exactly playing ball either, could really use a tool like this.

[@danielparret3623]

Black spoke skins???, I think that would be dope on those wheels

[@karelfortl2365]

Many thanks for sharing your mistakes. One of the best what I can imagine is prevent mistakes and damages without first experience almost like in the perfect World :-)

[@GalorOffroad]

Nice video, clean and clear 👌✌️

[@b_mb4948]

Best tire changing tool of all time? Simple... *_Bebe Powdah_*

[@MrCalifornia1234]

Seems like a useful tool. 👍

[@aido_supermoto]

awesome video cameron!

[@user-xo5dc6hf7c]

It’s better to start at the point furthest from the valve so that when you finally get to the valve area the tire can sit in the middle.

[@troybullock3027]

U should do a full mod build on the klx

[@hampton6963]

Can you do a newer 450 plastic conversion ?

[@CameronNiemela]

Possibly

[@mxrider2strokebraaap54]

Looking mint😍 great video as always

[@Rico__B]

Awesome video, thanks!

[@marcspencer800]

Let’s see you do the rear tire on a 50sx

[@blackdevilteam5503]

Hey Cameron! What you think about buying a 2003 KTM EXC 250 2 stroke? It has some SX, and SXS parts.

[@MarceloDelfinoDelfino]

Boa Noite tem no mercado livre?

[@OogleTheGreat]

There should be NO NUT on the inside of the tube. Remove BOTH nuts so the beveled washer is directly against the rim. The washer is specifically designed to fit against the rim. This is attributed to an email from Michelin, on an Ariel forum: The conical washer sits over the inner tube valve stem and should follow the contour of the valve so that the convex side sits against the wheel rim when fitting. Once fitted to the wheel the two lock nuts sit on the valve cap side of the wheel rim. After fitment and inflation to the correct pressure, the two nuts should be backed up towards the valve cap, and locked against each other. This is not usually an issue on correctly inflated road going tyres, but should there be any slippage of tyre on the rim, during heavy braking or acceleration for example, the inner tube could be pulled around slightly with the tyre and if the inner tube is bolted to the rim the valve can be ripped out. If the lock nuts are raised towards the valve cap then inner tube has some leeway to move before this happens. Any movement is thus obvious as the valve stem will no longer be straight and pointing at the centre of the hub, but will be pulled round at an angle.

[@scotsman9490]

can you do a supermoto build

[@dandufour116]

would this work on 10/12 inch pit bike tires because the ones on my crf50 are a PAIN to change

[@N1k5ulZZ]

another great video as always :)

[@jamespolucha6911]

Where do you get the rubber cap for the valve stems

[@lukemadsen7254]

whens the bike gonna be put together

[@DiverTrev]

*PARTOF THE NOTIFICATION SQUAD YAY GOOD VIDEO*

[@xygarkemper6392]

Where do you find those ruber grommets plz?

[@owenarsenault5955]

Looking like a pro. 👌

[@SnipingWithSkillz]

Is it possible to do this without a stand, can you remove tires with this tool?

[@CameronNiemela]

You don't absolutely need the stand, could be done on a workbench or bucket. This is for mounting tires only

[@michaelthiergarten818]

Your awesome Cameron!

[@glyph8733]

Really love your Videos dude!!

[@ram43x80]

Tool has gears n tension n ware out gears?

[@senor7857]

Doesnt the rim locks go under the rim bands? ----> THIS

[@orazio8468]

Tyre lever are good but can damage the rim

[@lmohr4630]

They look sweet

[@mikegro8502]

Does the rim locks go under the rim bands?

[@CameronNiemela]

Yep, thats how I had it

[@mtbridingog9083]

Bro mx3s are stupid good I run dunlop geomax in my pitbike and cr125

[@ralphwatten2426]

Worried about a little nick in his new rim. Haha. First block pass and that thing will look just like all his other rims.