Can-Am Outlander L 570: How To Change The Spark Plugs 570 650 850

My 2016 Can-Am Outlander L 570 XMR started missing and I think the spark plugs are the problem. In this video I show you how to change the spark plugs in a 16' Can-Am Outlander L 570. This video should also be help for owners of Outlander 650, 850, and 1000 since they all share a similar engine design.
4 pack of spark plugs for 570 and 650. Set GAP to 0.028" : amzn.to/3ErBOze
Spark plugs for Can-Am 850 and 1000 engines. Set GAP to GAP 0.032": amzn.to/3JULjrQ
Spark Plug for 450 (single cylinder). Set GAP to 0.034": amzn.to/37UBjSh
Camera I used to make this video: amzn.to/380qXQF
All of my Can-Am DIY videos can be found here: bit.ly/2RTF6n4
Follow me on:
youtube: / diydancars
Instagram: / diydancars
Disclaimer:
Due to factors beyond the control of DIYDan, I cannot guarantee against improper use or unauthorized modifications of this information. DIYDan assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk!!!
DIYDanCars is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Your purchase from the above links helps supports this channel and create content for viewers like you. Thank you for your continued support!

[@DIYDanCars]

4 pack of spark plugs for 570 and 650. Set GAP to 0.028" : amzn.to/3ErBOze Spark plugs for Can-Am 850 and 1000 engines. Set GAP to GAP 0.032": amzn.to/3JULjrQ Spark Plug for 450 (single cylinder). Set GAP to 0.034": amzn.to/37UBjSh Camera I used to make this video: amzn.to/380qXQF All of my Can-Am DIY videos can be found here: bit.ly/2RTF6n4

[@ManzanoManATVAdventures]

Good video on how to change out spark plugs on the Can-Am. I appreciate your DIYs.

[@canamdennis6829]

please keep making your can am videos they are so helpful thank you so so much

[@bearzytankttv2474]

Awesome job here thanks for the tutorial i own a can am outlander 1000 xmr about to do mine now

[@angell.s.7810]

😂😂😂 Excelente vídeo con música de intriga jjjjj y el tutorial tan variado promete mucho. Super agradecido!!! Muchas gracias!!!,,,,,,,👍👌

[@Williamxmr]

Get a swivel. Use anti seize. Use dielectric grease under the boot.

[@christopherhunter878]

The music at the end got me 🤣😂

[@SWATT101]

Just barely made it back from A ride...I'm thinking plugs too...your Vid is very helpful thanks!

[@SWATT101]

Yup was the plugs...bit of a pain in the butt lol

[@philipaudlaluk2548]

Yesterday I changed my wife's can am outlander max xt 570 spark plug, I find by removing left panel too makes much easier to access the front spark plug but need to bend the muffler thin metal guard then just need to bend it back

[@DIYDanCars]

That sounds like more work. I had absolutely no problems with just removing the right side engine panel and wheel well cover, but do what you feel comfortable with.

[@joshuahall9809]

does this back have a coil pack

[@eduardopena9991]

Good job .

[@ShaneOfallon]

Thanks I had the same problem

[@DIYDanCars]

No problem

[@stuartgardner2955]

Thank you! I got an oil kit and thought I'd change the plugs while I was at it and got really discouraged about that front cylinder. But now I think I can handle that.

[@elig2805]

Thank you for making this video, just changed mine and it was super easy.

[@randyhoward9651]

Great video, much appreciation. Make sure and use anti-sieze especially with aluminum. I did my plugs today and ended up having to remove both sides of the plastic as the front one had so much crap and corrosion down in there I could not get the socket on there properly, I had to dig the junk out, it took a bit, but I went ahead and cleaned everything up nice since it was all apart.

[@GreasyStool]

Got a 2015 500 Max L was wondering how to get in there to do mine! Thanks!

[@brianolvera8054]

What size of socket?

[@cedarcross1058]

What type of plugs are you using?

[@DIYDanCars]

The information you seek is in the description and in a pinned comment I made.

[@jonathanfrayre1]

What's that whining noise at the clutch ? , Mine does the same thing 😕🤔

[@user-hf2rv9zx8n]

Water in engine how to clean carburetor?

[@DIYDanCars]

Carb? Complete disassembly, clean components, and reassemble is the only way to do it right.

[@cristianolivas2057]

So it’s just two of them?

[@Mr402TA]

I'm doing this job now, it wasn't bad except for the replacement plugs I bought not having the removable cap on the top....And they were like-for-like NGK's too lol. Back to the auto parts store.

[@DIYDanCars]

I have made that mistake too! Congrats on completing the job!

[@mobleyMobley]

thank you diy daddy

[@nombr]

Good vid man Was the socket thin walled? I found it very difficult to get mine on

[@scottmctaggart5294]

I got the rear one. I'm having the same problem. Can't get the socket to go on the front one.

[@jasonripley9297]

Hey thanks for the video. Doing mine today

[@DIYDanCars]

Good luck!

[@Lyle-1999]

Thanks

[@michaeldouglas9457]

quad can am 570 doesn't burn a piston

[@MrWizzle5]

Yes, The V twin engine uses 2 spark plugs.

[@mega-hb4re]

Wasn’t better to remove the plastic on the other side?

[@DIYDanCars]

I never tried because doing it this way was very easy to me.

[@hoskins103]

grease?\

[@bradyhuselton5383]

What tires are those??

[@DIYDanCars]

Maxxis Bighorn

[@dennisgt479]

How many miles or hrs did you go when this happened? I have a 2017 570 max xt

[@DIYDanCars]

It started missing around the 200 hour mark.

[@dennisgt479]

Thank you for replying, i will replace mine at about 175hrs!

[@DIYDanCars]

@@dennisgt479 No problem! Good luck!

[@saulcolin9476]

I have a 2020 Can am 450 do you think spark plugs are placed in the same spot?

[@DIYDanCars]

The 450 is a single cylinder engine and not a twin like the 570.

[@saulcolin9476]

DIY Dan oh good I’m glad, where would you think it’s located?

[@DIYDanCars]

@@saulcolin9476 I looked at a parts diagram and the 450 looks exactly like the 570 minus one cylinder. With that being said, I think the process will be very similar to my 570, but you won't have to worry about changing the spark plug for the rear cylinder since you don't have one.

[@saulcolin9476]

DIY Dan gotchaaa so it should only be the one in the front?

[@cjk247]

screw that! i will just pay the dealership to do it...lol. this reminds me of one of those types of jobs where you think its gonna be a fast easy job then it takes almost all day to do

[@DIYDanCars]

No problem with that. Every person has a different skill level. FYI: This service took me less than 30 minutes to do from start to finish. Adjusting the shifter was quite easy to do.

[@240sxslideordie]

Why remove the cap ?

[@DIYDanCars]

Because Can-Am required me to do so on my 570. If you have a 570, then you should have noticed the caps were removed from the old spark plugs as well.

[@trxreality9633]

You should post a vid of some riding!

[@DIYDanCars]

Sure, I can do that! I'll post some footage of me snow bogging once we get some snow on the ground.

[@trxreality9633]

@@DIYDanCars awesome! I would love to see it rip!

[@lmCIoudz]

Great video!

[@DIYDanCars]

Thanks!

[@pppaulie73]

Shame on can am. Everything is a bitch on these. Spark plugs, oil changes, this stuff should be made easy to do. A nuisance.

[@DIYDanCars]

I think they do this on purpose so you are stuck dealing with the tyranny of the "stealership". ;)