Can Am Spyder RT Rear Brake Pads

  Рет қаралды 35,668

It's Yours. OWN IT

It's Yours. OWN IT

Күн бұрын

Installation of rear EBC brake pads from BAJARON on a Can Am Spyder RT with 24,000 miles.

Пікірлер: 48
@BeeMan015
@BeeMan015 3 жыл бұрын
Thanks for providing the video, it really helped. Especially the needle nose pliers and turning the puck in. I worked for over 45 minutes to try and get the caliper to fit over the rotor but it wouldn't go. Watched the video and it made all the difference. Thanks!!
@tonymir
@tonymir Ай бұрын
It's nice they keep T30 fasteners for the parts that may be removed more frequently..
@drkennedy611
@drkennedy611 2 жыл бұрын
Thanks for the video. I'm about to change fine out and it will help me tremendously.
@jamesworland3064
@jamesworland3064 2 жыл бұрын
A lot in common.. I HAVE A 2014 and ever year we try and take 3 weeks and travel .. Grand Cayon- Canada / Cabot Trail.. loved watching the whales.. just saying hi. jim from ky.
@davidvuchetich3045
@davidvuchetich3045 2 жыл бұрын
Curious how ur EBC pads are doing now that you've had them on a while. I'm assuming these are the fully sintered EBC HH aftermarkets (for BREMBO) that you put on rather than stock Brembo from BRP. I have a 12 and 14 RTs. My 12 RTL only takes the EBC SEMI sintered that I put on 4000 miles ago. While changing the rear tire I noticed the EBC SEMI sintered on the 12 RTL are worn down significantly in 4000miles to 1.5 mm. My OEM brakes lasted til 16k.The 12 RTL only takes the SEMI sintered..I'm thinking that I might have possibly mis-aligned the rear wheel when putting on my brakes 4000 miles ago rather than it being a brake problem..I understand that some caliper pins may or may not have shims (like the abs sensor) for BREMBO) I didnt see these. I'm a lil miffed at only 4k on this set for the 12 RTL and curious what you've found for wear on ur 14 EBC fully sintered pads as my 14 is due soon too.Thanks!
@carlchristianjr.4927
@carlchristianjr.4927 3 жыл бұрын
Are you taking the cap off of the brake fluid reservoir for when you screw in the park brake piston? I was going to change my rear pads as well and didn't want to miss a step.
@ItsYoursOWNIT
@ItsYoursOWNIT 3 жыл бұрын
I did not, but it wouldn’t hurt to do so. The cap is vented so it will not pressurize the reservoir.
@clauderoderique7540
@clauderoderique7540 3 жыл бұрын
Where can I find the instructions from Bajaron to bevel the brakes?
@ItsYoursOWNIT
@ItsYoursOWNIT 3 жыл бұрын
The instructions came with the brake pads.
@jamesgruhn-n0dfi647
@jamesgruhn-n0dfi647 4 жыл бұрын
Great video thanks for sharing
@LannyLister-ik7nz
@LannyLister-ik7nz 3 ай бұрын
Ok,I watched you turn the brake piston back into it’s housing, and I’ve read from others how easy it was when you knew what to do, but my piston is sticking up further than yours in the video, and not moving in at all. In fact it is extremely difficult to turn it at all, I’m currently using needle nose pliers clamped with vice grips to make it a little easier. Pushing while turning gets me nothing. I even tried a c-clamp for good measure. Any help is greatly appreciated.
@grob9202
@grob9202 Ай бұрын
Was your emergency brake on??
@philliplove2055
@philliplove2055 2 жыл бұрын
You mentioned that you chamfered and slotted your pads per Baja Ron's instructions. I have searched the internet and can't find his instructions...actually, can't find any instructions. I'm guessing the instructions were provided with the pads. I ordered the same pads from SlingMods but there was no mention of chamfering and slotting when I received them. Do you still have the instructions? If not, can you tell me how you did it? And lastly, is it absolutely necessary? Don't want to mess up a set of expensive pads if I can avoid it. Thank you in advance for any advice.
@desimora8
@desimora8 4 жыл бұрын
Just curious. About how many miles did you get from your brake pads? Obiously durabilty changes with driver aggresiveness and riding style. Saw your answer (+/- 24K miles) below so no need to reply. Thanks for the video. Work safe.
@taddbitofvideos3974
@taddbitofvideos3974 3 жыл бұрын
Hay buddy, can you send me the link to what tech tip you got from Bajaron brake pads. You talked about a tip, but can't locate it. Great video, thanks
@ItsYoursOWNIT
@ItsYoursOWNIT 3 жыл бұрын
He sends an instructional page with the pads.
@egghead992
@egghead992 3 жыл бұрын
Chris I for the life of me can’t find EBC pads from Bajaron , I did find them and bought a pair, my question is it necessary to slot and bevel the leading edge of the new pads?
@ItsYoursOWNIT
@ItsYoursOWNIT 3 жыл бұрын
My understanding is that the slot and beveling helps with heat buildup and cleaning the dust off of the pad and rotor. My guess is that the OEM pads are built this way so that is the recommendation. I would say that it is definitely not mandatory or they would come like that.
@rolemoto5904
@rolemoto5904 3 жыл бұрын
Meu amigo vc me salvou com seu vídeo obrigado.😎😎👍
@ItsYoursOWNIT
@ItsYoursOWNIT 3 жыл бұрын
Estou feliz por ter ajudado, bom trabalho em fazer seu próprio trabalho! Tenha um feliz Natal! e obrigado por assistir. 👍
@edacklin6915
@edacklin6915 3 жыл бұрын
You mention several times about BajaRon's instructions. Where do you get these instructions? I can't find a BajaRon website. Mainly, I need to know how to slot and bevel the brake pads. Or please create a video to show how to do it.
@orjanbern4766
@orjanbern4766 Жыл бұрын
Does EBC brake pads give better braking power? Thanks,
@keithkennedy2931
@keithkennedy2931 2 жыл бұрын
Thanks for your videos really appreciate them they hope a lot the last one I've seen is over a year old are you making any more
@anthonypenna5961
@anthonypenna5961 3 жыл бұрын
Chris I spoke with EBC rep they say NO shims needed don't put shims on they already compensated for size...
@ItsYoursOWNIT
@ItsYoursOWNIT 3 жыл бұрын
It is my understanding that the shims are done at the factory to compensate for uneven caliper mounts on the swing arm to align the caliper with the rotor. If there are shims on the caliper mounts, I would definitely put them back when assembling it.
@michaelholt9350
@michaelholt9350 3 жыл бұрын
@@ItsYoursOWNIT Chris, I think Anthony is referring to the shims on the back side of the pads that you re-used. I might be wrong though, please clarify.
@dennisirvin1916
@dennisirvin1916 4 жыл бұрын
Good video
@ItsYoursOWNIT
@ItsYoursOWNIT 4 жыл бұрын
Dennis Irvin Thank you sir!
@matthewdazzo6395
@matthewdazzo6395 4 жыл бұрын
Hi on the brake cable did you release it from its holder?
@ItsYoursOWNIT
@ItsYoursOWNIT 4 жыл бұрын
Matthew D'Azzo, no I didn’t. There is no need.
@trykersaurus9082
@trykersaurus9082 2 жыл бұрын
What grease did you use for this?
@chrismills4213
@chrismills4213 2 жыл бұрын
Awesome
@BlakWiseCracker
@BlakWiseCracker 3 жыл бұрын
Hi 🙋🏻‍♂️ is there a repair manual for these Trikes. I appreciate the video I just need a more in-depth repair book. Thanks
@ItsYoursOWNIT
@ItsYoursOWNIT 3 жыл бұрын
I got lucky and found used actual shop manuals on eBay. The digital versions are available online. Here is a link to one source: canammanuals.com/can-am-spyder-manual.htm
@BlakWiseCracker
@BlakWiseCracker 3 жыл бұрын
@@ItsYoursOWNIT, I just subscribed to your channel and thanks for the information. Cheers mate 🍺🍺
@Den-nu6pv
@Den-nu6pv 2 жыл бұрын
What year is this spyder
@rudybergen8975
@rudybergen8975 3 жыл бұрын
Abs sensor is not a 5 ml bolt on my 2014 RTS it’s got a allen head bolt go figure
@ItsYoursOWNIT
@ItsYoursOWNIT 3 жыл бұрын
Yes, I should have been more clear. It is a 5mm hex, or Allen head bolt. Sorry Thanks for watching
@philliplove2055
@philliplove2055 4 жыл бұрын
Another great video...thank you! How many miles did you get out of the rear pads? The O-ring...did you not need it after all or does it go after shims instead of before?
@ItsYoursOWNIT
@ItsYoursOWNIT 4 жыл бұрын
Thanks, I should have mentioned that. It has 24,000 miles. I looked at the parts diagram and it doesn’t show an O-ring on the speed sensor. I did put one on it after the shims, mostly because there is a slot for it on the speed sensor and if nothing else, it will keep the sensor centered in the hole.
@philliplove2055
@philliplove2055 4 жыл бұрын
@@ItsYoursOWNIT great idea. Thanks for the info. I'm at 19k on my 2014 RT Limited so I'll probably be using this video by the end of the summer. Keep up the great videos!!
@christianfigueroa9253
@christianfigueroa9253 4 жыл бұрын
Hi Sir Thank you for the video. I will be doing mine soon. I have a separate question. What you use as holder for your phone? We have the same RT and I’m looking for a phone holder and drink holder. Any advice will be great. Thank you
@ItsYoursOWNIT
@ItsYoursOWNIT 4 жыл бұрын
Christian Figueroa, I made a video on the dash mount. You can go to my channel and scroll down to it. In the description of that video are links to all of that stuff. The only difference between then and now is I switched from using an X-grip phone holder to a Arkon Road Vice. I really like it. Here is the link: Arkon RoadVise Phone Holder for iPhone 7 6S 6 Plus iPhone 7 6S 6 5S Galaxy S7 S6 Note 5 Retail Black www.amazon.com/dp/B00WTQEX7E/ref=cm_sw_r_cp_api_i_NiJREbGKGY9KB
@alexlewis6497
@alexlewis6497 4 жыл бұрын
Great video, had me worried you had forgotten the retaining pin.
@ItsYoursOWNIT
@ItsYoursOWNIT 4 жыл бұрын
Well, if I would have, it’s good to know you’ve got my back. 👍 thanks
Brake Pads Can-Am Spyder #howto Change Them
10:26
MartinTheVlogger
Рет қаралды 13 М.
Can Am Spyder Brake Inspection and Fluid Flush
9:03
John & Miriam's Travel Vlog
Рет қаралды 18 М.
WILL IT BURST?
00:31
Natan por Aí
Рет қаралды 44 МЛН
王子原来是假正经#艾莎
00:39
在逃的公主
Рет қаралды 26 МЛН
Can am Spyder RT - How to replace ALL brake pads in 7 minutes
7:31
Mathieu Tech Moto
Рет қаралды 48 М.
Can Am Spyder RT Rear Tire Removal and Installation & Belt Alignment
37:42
It's Yours. OWN IT
Рет қаралды 57 М.
Fixing a stuck Parking brake on a Can Am Spyder - Carry the tools to save your ride !!
7:43
Pierre - Spyder TV Poliquin - Spyder Accessories
Рет қаралды 55 М.
équilibrage roue arrière spyder Can-Am en statique
12:32
guillaume malatre
Рет қаралды 7 М.
Bleu II Gets an Upgrade, BaJaRon Sway Bar and Rear Tire
15:35
John & Rita
Рет қаралды 1,7 М.
Can Am Spyder Air Filter Change
9:12
Tom Cruisin
Рет қаралды 3,5 М.
Beautiful Can-Am Spyder RT Body Removal
12:43
Shawn Smoak
Рет қаралды 103 М.