Can Am X3 Wheels and 30" Tires going on a Defender limited. What you need to make it work.

Video includes the part numbers for what you need to make the x3 wheels fit and look good on your defender. Any questions let me know. Thanks

[@michaelmessner3169]

Roller Man - thank you. This was what I was looking for! Great job and video!

[@therollerman3465]

Awesome! Thank you!

[@lloydmarche7263]

I was going to install a set of 30s on my defender but realized it wouldn’t clear my garage door. The wheel set up looks great on your machine . 👍.

[@wg5768]

Garage door clearance would be my problem also.

[@the__a20]

I bought a 22 defender a couple months ago and I was wondering a good size tire without having to add a lift or anything and I happened to come across your video and I now know what to look for on Facebook market place 😂😂

[@gregs8678]

Great video, going to do this to mine have you had any issues since? I’m getting ready to buy a set off of marketplace.

[@therollerman3465]

No problems at all. Thank you

[@scottg9208]

Looks great with the 30’s. Glad they went standard with them in the 2023 Limited’s. You will probably find yourself putting the fender flares in it. I put them in my 2023 Limited Max and it makes a huge difference in keeping the mud, water etc off your windshield and side of your machine. Enjoy your first ride on them!

[@therollerman3465]

I just got them in and getting ready to put them on. I may go ahead and put on forward control arms also. Thanks for the compliment.

[@wg5768]

What's the weight difference?

[@quailshootr6389]

12:14 Thats cutting it pretty close with those nerf bars from what i see. Id get rid of them.

[@therollerman3465]

Haven't had any clearance issues yet. Thanks

[@DDrenegade6632]

I have been reading X3 rims would not work with the defenders because the X3 turbo maverick runs 12mm studs vs 10mm on the defenders. Your set seems to fit no problem. Any idea what people are talking about?

[@therollerman3465]

That is true about the studs. They work just fine since the lug nuts self center in the wheel. Hope this helps

[@DDrenegade6632]

@@therollerman3465 Interesting. Ever have any issues with loose lug nuts or anything else?

[@therollerman3465]

Never had any issues. Retorqued after about 10 miles and now have over 300 miles on them,@@DDrenegade6632

[@K.BRENTSTAGG]

What was the offset on the Maverick wheels that you installed on your defender. 4+3??

[@hurcovmx426]

Did your defender already have the two in extended A arms? Because I have the 2020 limited. And mine, I'm not sure if the 30in would work. Thanks for your time

[@therollerman3465]

Stock arms. I am ordering 2inch forward arms so I can put fender flares on but the tires clear with stock. Thanks

[@spokesmenmoto]

The only thing you added to the front was the caps? Great video sir!

[@therollerman3465]

Yes indeed. The caps were the only thing I needed to change out. Thank you

[@jessehuebsch109]

Thanks for the info what size garage is that?

[@therollerman3465]

30x40. Thanks

[@xGR1MxREAPERx]

Sucks that all these 22.5 guys got the new doors but didn’t get the 30” tires like the 23’s got lol.. it wasn’t just tires and the 2023’s got beefier and forward front a arms to make room for the new 30’s

[@JasonShepherd-q1s]

I put these on my defender max XT and when I have a lot of weight in the machine there rubbing on my wheel well a little .. can I adjust the suspension or would wheel spaces help?

[@therollerman3465]

I ended up changing the front control arms to 2 inch forward arms. I barely rubbed at full lock but wanted to add mud guards so wanted the extra room

[@themulesheriff3009]

Why did you put spacers on the rear? Would they clear without the spacers?

[@therollerman3465]

It makes all 4 tires even on the outside. These are the same size tires now all the way around. The factory tires are narrower in the front.

[@9nikesoccer]

What tire pressure are you running ?

[@therollerman3465]

On road about 25 feels the best and off road about 8

[@wmdouglas3]

The max psi on my 30s says 36psi.