Can you Paint a Model Kit on a £5 budget? Painting Challenge

  Рет қаралды 63,631

Model Minutes

Model Minutes

Күн бұрын

I know that As a beginner to scale modelling, you might not have that much money to spend on specialist paints to build your first model. But what’s the worst that could happen if you decide to buy cheap paints? So in this challenge video let’s see if I can answer the question, is it possible to paint a model kit, which doesn’t look completely terrible, with products costing less than £5?
Take a look at the model kit I used here:
Airfix A01005 Mitsubishi Zero in 1:72 Scale
amzn.to/3rNnvRi
Please consider pledging your support to help keep the channel growing from strength to strength. Find out what's in-store and how to unlock additional perks here: / modelminutes
Join the channel to get access to perks:
/ @modelminutes
If you like what I do, why not buy me a coffee over at ko-fi.com/modelminutes
Come join the live conversation over at Discord, chat to other modellers in real time! / discord
If you want to buy any of the kits i've built or recommend - take a look here (it helps support the channel):
www.amazon.co.uk/shop/modelmi...
Subscribe with notifications on to help support the channel!
/ modelminutes
I have a second channel where I like to upload other videos - take a look:
/ @mattssecondchannel
Let's get social!
/ modelminutes
/ modelminutes
/ modelminutes
This video is intended for adult scale model enthusiasts.
Model Minutes holds no responsibility for any accidents, damage or injury that could occur as a result of attempting to replicate any steps depicted in this video. This video is intended for entertainment only.
Unless specifically indicated, all products have been independently purchased.
All music from Epidemic Sound:
An Animated Life - Imprismed www.epidemicsound.com/track/W...
Tried and True - Imprismed www.epidemicsound.com/track/C...
Nothing for me (instrumental) Lupus Nocte www.epidemicsound.com/track/T...
36mm - Jobii www.epidemicsound.com/track/7...
Monuments - Bonnie Grace www.epidemicsound.com/track/B...
Arctic Peach - Luwaks www.epidemicsound.com/track/L...
#Airfix #Challenge #Painting #modelkit

Пікірлер: 610
@raven1wing1
@raven1wing1 2 жыл бұрын
Watching this video. Gave me flashbacks to when I first started out building kits. I used on my first ever model (I didn't get much pocket money back then.) Was those solid block water colour paints. I could still picture it now I made a right pigs ear of the paintwork. My grandfather was horrified that I could screw up a simple colour scheme of a......"spit". And yes he was in the RAF during the last war
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Some of my very early builds were terrible, I’ve still got some somewhere
@amuxpatch2798
@amuxpatch2798 2 жыл бұрын
@@ModelMinutes those paints are thick media and are meant for canvas painting and small plaster/clay objects such as a vase. Thats why you don't get smooth paint flow on plastic surface.
@sweetcorn1968
@sweetcorn1968 2 жыл бұрын
I tried something similar and went through a phase of buying 1 or 2 pots of acrylic paint every time I went in Poundland. I came to the conclusion that just because you can, doesn’t mean you should.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I think that's the exact sentiment!
@vinnyganzano1930
@vinnyganzano1930 2 жыл бұрын
Artist acrylics and even some oil paints can be used to get tremendous results when painting wargame and large scale display figures. Just never use them without a basecoat.
@PandaXs1
@PandaXs1 2 жыл бұрын
@@vinnyganzano1930 yeah primer actually works wonders in cases like these, definitely worth the investment if you're on a budget.
@HO-bndk
@HO-bndk 2 жыл бұрын
Artist's oil paints used to be the only thing that figure modellers ever used.
@memkiii
@memkiii 2 жыл бұрын
@@HO-bndk Oils aren't watery though, and have no problem adhering. Cheap water based Acrylics like these, will never easily cover bare polystyrene. Adding some mild detergent would help with the beading, but not the lack of pigment.
@PSPmaster321
@PSPmaster321 2 жыл бұрын
Here's a challenge. Why not buy the cheapest, most basic entry-level beginner kit, and build it to the highest possible standard, using all the skills and techniques you have acquired over the years
@DansModelBench
@DansModelBench 2 жыл бұрын
Better still, use the same kit as this. Would make for a fun comparison.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I think that was the intention from the starter set challenge i did last year
@LRBerry
@LRBerry 2 жыл бұрын
I was thinking to make the Zero kit again, but with, as you say build it to the highest possible standard, using all the skills and techniques you have acquired over the years. I do think your suggestion would make a great video to watch.
@PSPmaster321
@PSPmaster321 2 жыл бұрын
@@ModelMinutes oh cool. Though not sure I know which one you mean, do you have a link?
@ModelMinutes
@ModelMinutes 2 жыл бұрын
@@PSPmaster321 Can you build a Starter Set Model Kit using ONLY the included paints and glue? Airfix Bf109E-3 kzbin.info/www/bejne/aZzLk4CQn5iZbdU
@normalicious9734
@normalicious9734 2 жыл бұрын
This was a trip down memory lane to when I made my first model, used un-thinned humbrol paints in thick layers. Wasn't much panel detail left.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
sounds like my first details too!
@sukhoisu-27flankerbdude92
@sukhoisu-27flankerbdude92 Жыл бұрын
That’s like my first model, un thined testers paint witch was pretty dangerous because I didn’t know they where toxic now I don’t really use testers paint now, my main paint right now are Vallejo air since they are pre thinned and I also use Ak paint but I still don’t have thinners so I can’t thin ak paints, I tried to thin ak paints with water, and it did not work at all it became like som sort of liquid putty, but my main main paint is Vallejo air
@nickcarter4894
@nickcarter4894 Жыл бұрын
None of us ever thinned those Humbrol enamels. Some of them went on like treacle. 😆
@robertgottlieb3731
@robertgottlieb3731 2 жыл бұрын
This model challenge was the equivalent of the Netflix baking show Nailed It! I cringed, I laughed, I thoroughly enjoyed the video!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks :P
@michaelcooke2559
@michaelcooke2559 2 жыл бұрын
Very interesting challenge. Most of us experienced modelers have forgotten what it is like to start model building. Thanks for sharing, and reminding us of humble beginnings.
@stevieb6173
@stevieb6173 2 жыл бұрын
and that's the important point , always remember how you started , makes the pleasure of where you are now so much more enjoyable 👍👍
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks for watching!
@vitoscaletta3886
@vitoscaletta3886 2 ай бұрын
In My opinion its executed very well, particularly when you keep in mind that the colors used aren't for modeling in any form. Look at that canopy alone! Man i am astonished, earned yourself a new subscriber!
@ModelMinutes
@ModelMinutes 2 ай бұрын
Thanks very much!
@ethansgamingchannel7077
@ethansgamingchannel7077 2 жыл бұрын
Intresting Challenge. I have an idea for another challenge if you need one, try buying the cheapest aircraft model kit you can find and build & paint it
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I think that would have to work off the RRP of the product seeing as I have an Airfix Lynx in 1/48 scale which cost me £2, not really much of a challenge there lol
@Cz17.sb1
@Cz17.sb1 2 жыл бұрын
@@ModelMinutes I have seen many £5 airfix kits on Amazon in 1/76
@RichardMontgomeryYT
@RichardMontgomeryYT 2 жыл бұрын
@@Cz17.sb1 1/76 or 72? Please link
@terrycarter6562
@terrycarter6562 2 жыл бұрын
Arifix does have a kit that comes with its
@ethansgamingchannel7077
@ethansgamingchannel7077 2 жыл бұрын
@@ModelMinutes Ah i see, maybe build it using your bear hands? Just a suggestion for a challenge
@rorye4176
@rorye4176 2 жыл бұрын
I love these starter challenges because it makes me feel better about my own work seeing how someone so professional can still only do something so good with the resources available, and as I slowly collect more tools and paints and get better skills my models look better and better, thanks for keeping me inspired,
@ModelMinutes
@ModelMinutes 2 жыл бұрын
im glad that you enjoy my videos and that they have helped you out :D
@EAbc-bt6em
@EAbc-bt6em 2 жыл бұрын
I know this issue to well...I painted my very first model(f4u Corsair)with acrylics only because i didnt want to get the Revell colors. Even tough i sanded the surfaces a bit, the painting was a total desaster. I washed the parts of my second model in soap and vinegar but still-the acrylics didnt stick to the model. I wasted lots of hours painting like 7 layers... Good paints are essential because without them, building models can be very frustrating. Thanks for the content and greetings from 🇩🇪
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I agree, thanks for watching!
@reefhog
@reefhog Жыл бұрын
Tamiya, Vallejo, Mig and others have acrylic paints that work perfectly well for painting models.
@ffibnogab7644
@ffibnogab7644 2 жыл бұрын
The uneven characteristics of that paint can be used to your advantage, to obtain a battle-worn and weathered appearance to the model. For example, painting each panel separately might give you an effect where the middle of each panel is washed out, with paint collecting at the edges. Colour makes a difference, too - that green could be greyed right down, to a 'scale' kind of vaguely-green tone that fits with the weathered appearance. To complete the faded look, paint the markings on, rather than use the decals.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Thanks for the ideas!
@ffibnogab7644
@ffibnogab7644 Жыл бұрын
@@ModelMinutes I've lost count of the number of times I've seen wonderfully subtle paint jobs spolied by the application of pristine decals...
@Ducknuck84
@Ducknuck84 2 жыл бұрын
having worked at craft stores I can tell you with experience that those types of paint sets are never any good, always found that the .99 cents 59ml bottles worked better if on a budget or starting out, but even to just get the RGB+WB at the minimum would have hit the £5 limits
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks for the info!
@joseantoniocustodio7232
@joseantoniocustodio7232 Жыл бұрын
A young modeler starting out would think his build is the best in the world. If he/she sticks to the hobby as he/she gets older than what looked as an outstanding build in their youth would now appear as flawed in many aspects. But it's the young who we need to bring into the hobby to make the industry continue and not totally lose out to computers and cellphones. Airfix did a video some months back of a Sherman tank build by one of their modelers. He built it and painted it the way a beginner would. Probably to make it appear to those wanting to enter the hobby not to get intimidated. So if you reedit your video and present it as one for a beginner and put a narrative suitable for them then it can very well pass off as something that will encourage a new crop of scale modelers. When I first built a kit in 1977, I used clay and duco cement to stick the parts of the Matchbox F4U corsair kit together. Later on I used acrylic water color to paint other models. It was always a mess but I had great fun and I am 55 years old now and do "proper modeling". I managed to influence my son to build by just letting him do whatever he wants to do, so I am confident that when I pass on to the rainbow bridge of modelers, my hoard will not be sold off to the usual vultures for 5% of it's actual price as a lot, but will be inherited by my son.
@ModelMinutes
@ModelMinutes Жыл бұрын
Well said!
@jackhaffenhoff1365
@jackhaffenhoff1365 2 жыл бұрын
It actually doesn’t look terrible. These challenges are really fun to watch.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Thanks 😊
@bobbyrice
@bobbyrice Жыл бұрын
Agreed.
@georgedistel1203
@georgedistel1203 2 жыл бұрын
When I first started building models I could buy the small testors bottles of enamels for .25 cents a piece but that was around 55 years ago. Actually it looks pretty good , I have seen cars coming out of the welfare apartments with that same finish.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks for watching
@orbitalair2103
@orbitalair2103 2 жыл бұрын
yeah, I remember that too. testers enamels were nice and thick. I think I had almost all the Monogram airplane kits.
@orbitalair2103
@orbitalair2103 2 жыл бұрын
I am kind of mad that rustoleum bought testers and then stopped the Model Master line. I liked those paints.
@georgedistel1203
@georgedistel1203 2 жыл бұрын
@@orbitalair2103 i really liked their non specular sea blue , I had to start mixing paints to replicate that color for my US warships ww2 ms22
@frontalwind
@frontalwind 2 жыл бұрын
I did this when I was a young boy using cheap paint for an aircraft. Got the same results as your video. Up till today, i am still using paint brush, though with the model making type, Testor as I often choose and prefer. I find airbrush to be complicated to setup and will hit my walls and curtains. But there is one thing I feel makes some difference. If you can bathe and wash the plastic kit with water and detergent, when you take them straight out of the box, soak them for an hour if you like, and then dry them in the sun. The kit is easier to receive paint then without washing off the oils on the plastic kit.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks for the info!
@tcandle695
@tcandle695 2 жыл бұрын
Not the best option but certainly you showed that is doable. I remember when I started building plastic models in my home country I had to use hardware store house enamels and wall paints because model paints were not available in the market. I had to mix the colors to get the tones that I needed. I used mineral spirits for the enamels and plain water for the wall paint to thin down. The results were ok for me as a beginner. After I moved to the USA I was in Heaven with all the modeling supplies available and model kits. I have seen car modelers airbrush acrylic craft paints with very good results. The paints that you used are for painting art. Those paints are not friendly for mixing with water so they need to be used pure. Another challenge would be to paint a model with artist oil paints. Thanks for your videos.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks for watching and the suggestion :D
@pauljohnson4833
@pauljohnson4833 Жыл бұрын
That takes me back! Did the Airfix WWII Ark Royal as a kid. Painted the flight deck in artist oil (from an old art set of my dad's). Not pretty.....
@DansModelBench
@DansModelBench 2 жыл бұрын
This takes me back. My seven year old self, approves of your build. Now for your second challenge, I dare you to put this up on the the scale model critique group and post the responses. On second thought forget that, you haven't done anything to deserve that. lol Thanks for all your videos this year. Always interesting and always enjoyable to watch. :)
@ModelMinutes
@ModelMinutes 2 жыл бұрын
haha thanks!
@Bob-bv9yj
@Bob-bv9yj 2 жыл бұрын
I’m getting back into modelling and love your channel buddy!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I'm glad you enjoy my videos :D
@JASHVEER22
@JASHVEER22 2 жыл бұрын
Nice tutorial. It gives confidence to those who want to start. Wish you a happy new year. Keep entertaining us.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
nice!
@mtaylor44
@mtaylor44 2 жыл бұрын
I have read that you can use PVA glue and paint as a primer. 10% paint (like grey) and 90% PVA. That cheap acrylic paint is very low in pigment and very high in carrier/medium, so you are pushing a lot of "tinted" medium over slick plastic. It needs something to bite into. I have also heard that watered down PVA makes a fair gloss coat for your decals to go on top of (once dried). That should help with the silvering. I say this because I don't think using PVA violates the rules here. Metallic silver nail polish may work and be cheaper to buy. Of course, you can borrow nail your mom's or sister's metallic eye shadow or metallic nail polish and mix it in with your paint can make a "metallic" paint!
@michaelkeogh8454
@michaelkeogh8454 2 жыл бұрын
Craft stores sell craft acrylic primer which is exactly this. I've mixed it with black craft paint to use as model kit primer.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks for the tips!
@naysmith5272
@naysmith5272 2 жыл бұрын
I would be interested to see this - the craft acrylic primer if it works.
@ThinkingPotatoOfficial
@ThinkingPotatoOfficial 2 жыл бұрын
I love these videos! It really shows you don’t have to be a millionaire to make great models!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Glad you like them!
@Eugene_Ko
@Eugene_Ko 2 жыл бұрын
I guess that`s a question every modeller asks himself "can I use arts and crafts paints for my models?" I learned the answer "only for dioramas" the hard way. Anyway this challenge is much easier here in Ukraine as there is ICM branded paints for like a quid each.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks! I have been asked a few times if artists paints work - i guess now we know
@dimligloing
@dimligloing 2 жыл бұрын
@@ModelMinutes Yes artist quality tube paints will work fine (used to paint lead soldiers in the olden days ), but they will be more expensive than the likes of Humbrol and Vallejo.
@Simon_Nonymous
@Simon_Nonymous 2 жыл бұрын
@@dimligloing spot on. I have some of those cheap acrylic paints, and they are ok to add a tint to an existing model acrylic paint but wouldn't like to use them alone. However I also use high quality acrylics and oils for modelling, and these have a much higher amount of pigment in them, and would cover so much better than the cheap stuff.
@jaybe2908
@jaybe2908 2 жыл бұрын
People still recommend craft paints for models, but we all have different standards and opinions, but it must be hard for new hobbyists to know online who to take advice from.
@Simon_Nonymous
@Simon_Nonymous 2 жыл бұрын
@@jaybe2908 you are right - there is a wealth of 'opinion' and some of it is really poor - but this is why I really support Matt's approach, as his experiment clearly shows that this was a fail so don't try it yourself.
@ColonelRebScaleModels
@ColonelRebScaleModels 2 жыл бұрын
Building this kit now in Pearl Harbor attack livery, it’s a nice little kit. I think you did as well as possible within the budget. And it doesn’t look bad at all from 6ft, really. 👏🏻👍🏻 Job well done.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks!
@jorgehcampos1054
@jorgehcampos1054 2 жыл бұрын
Regular acrylic paint can get some very decent results once you get the trick of dillution ratios. Also keep the parts clean of any grease to better results. Then of course maybe the quality of that particular paint brand and you should use flat brushes to apply paint on flat surfaces. Anyway, as with regular paints, use for mate base for better grip of acrylic paint, gloss coat for applying decals and a second mate base for finishing improves the results a lot.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Thanks for the info!
@maximillianphoenix9374
@maximillianphoenix9374 2 жыл бұрын
Don’t worry about the end product your always informative commentary is invaluable 🤗
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks!
@Steve-bo6ht
@Steve-bo6ht Жыл бұрын
My father always used this type of paint on his scale ship builds and would get fantastic results, he'd never use tap water but use distilled water similar to what you'd put in an clothes iron . It was something he'd learnt in the Navy as most of the crew built models and only had access to basic materials.
@ModelMinutes
@ModelMinutes Жыл бұрын
that's interesting!
@karljones9357
@karljones9357 2 жыл бұрын
You are definitely a braver man than me. The model is a perfect model, but I can’t say that a new modeller would carry on with the hobby if they had this as a final result. A for effort
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I agree, I think that it’s a good example why scale modellers have specific painting products
@ukaszbadura5670
@ukaszbadura5670 2 жыл бұрын
Nice challange. I enjoyed watching and was curious about the final outcome.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Thanks so much!
@Soltheman1
@Soltheman1 2 жыл бұрын
Im building the Revell Horton Go 226 currently and I’m using big tubs of Crawford and Black acrylic paints, and with this in mind the paints are sitting well after a few layers and the finish is coming along nicely!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
sounds great!
@glencwilson
@glencwilson 2 жыл бұрын
Very interesting to watch and thanks for giving it a go. That was a tough challenge and the result is a bit of a Monet - looks good from a distance but close-up it has character. Just wonder if a drop of dish soap would help break the surface tension and help the paint flow easier. If you could get them cheap enough I guess you could get three pots of primary colour model paints and mix them rather than those acrylics.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
that's a good idea, possibly an idea for another challenge
@timgodin2114
@timgodin2114 Жыл бұрын
Good job with that paint, painting Guillows balsa kit planes coverings ,are less stressful than using acrylics on slick plastic. Even testors acrylic model paints are fussy without an airbrush.
@ModelMinutes
@ModelMinutes Жыл бұрын
thanks for sharing!
@petarivanov9301
@petarivanov9301 10 ай бұрын
Ive never done modelling ever. And i really wanna make one with my grandfather. Seeing this video makes me happy to know that even on budget u can still make a good work. We will try at home and hopefully make a good work
@ModelMinutes
@ModelMinutes 10 ай бұрын
I’m not sure that the model I made in this video is “good”, I’d recommend actual modelling paint and not artists ones
@choccymilklord59
@choccymilklord59 2 жыл бұрын
It would be amazing to see the jump from a 5 pound challenge to 10 pound challenge. You would be able to at least get to different tamiya paints and maybe a decent set of brushes?
@ModelMinutes
@ModelMinutes 2 жыл бұрын
possibly!
@jazzmusician46
@jazzmusician46 2 жыл бұрын
Well done Matt. Given the challenge, I think you did a valiant job. Being a beginner, I do use acrylic paints for small jobs in the cockpit, only because I’m starting out and don’t have a library of Tamiya paints. They do very well to be honest. I’m not sure I’d try painting an entire plane though!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
haha thanks! Yes, these paints were not the best to use
@williamthomas7031
@williamthomas7031 Жыл бұрын
this video is very relatable! I used those types of paint on the airfix whitley when I was just starting out. The white was not fun, it took about 10 layers to barely have an even coat; It was from then on that I resorted to using spray paint for white. On another note though, I have used those works brushes for everything and for what its worth they are actually rather good at filling areas.
@ModelMinutes
@ModelMinutes Жыл бұрын
I've recently discovered the joys of a good spray can of white paint :D
@julianlopez6353
@julianlopez6353 4 ай бұрын
Great video. You literally gave me the confidence to use those cheap canvas acrylic paints I have lying around and use it to detail my model kits. I’m a beginner and I’m doing the spray can route but the tiny details I want to add color to had me worried but not anymore.
@ModelMinutes
@ModelMinutes 4 ай бұрын
Great to hear!
@roofs7070
@roofs7070 2 жыл бұрын
This is a very interesting one! Can’t wait to see the result on artist acrylics!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
:D
@petermerz2704
@petermerz2704 2 жыл бұрын
Very interesting. I have built models that I’ve used cheap paints on, but I airbrushed them, so the finish is nicer. Don’t know if I could hand paint for a nicer finish. Merry Christmas!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Thanks! You too :D
@spitfireguy4237
@spitfireguy4237 2 жыл бұрын
I'm building this kit atm and how glad I am looking at this that I have all the professional paints
@ModelMinutes
@ModelMinutes 2 жыл бұрын
haha! i bought a second one of these kits and i intend on doing a better job next time
@roarexenl
@roarexenl Жыл бұрын
I think a starter will be annoyed a lot when the paint doesnt do what it did here. you have loads of experiencee and due to having a challenge stayed on working on this to get to the end. I wont see starters having that, I almost stopped building after I got annoyed not having the right cockpit green in the start of my building, after I mixed a decent cockpit green I finally found one I like and from then I got over that issue. but good to see that some stuff you just need the right stuff to get going.
@ModelMinutes
@ModelMinutes Жыл бұрын
Yeah, I would like to think that a beginner would look for some better paints than the ones I used here tbh
@davegiles2344
@davegiles2344 2 жыл бұрын
Merry Christmas 🎄
@ModelMinutes
@ModelMinutes 2 жыл бұрын
And to you!
@samuelmumby7982
@samuelmumby7982 2 жыл бұрын
Painting on a budget advice: £1 spray primer from poundland. I even managed to get a can of silver spray paint from there which is a steal when you consider the products aimed at hobbyists
@stuartingleby1523
@stuartingleby1523 2 жыл бұрын
Yes it would have been very different results if it was a £6 challenge and a rattle can primer added 👍
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I use these on some of my other builds
@ArcaanRitual
@ArcaanRitual 2 жыл бұрын
Nostalgia trip to the max! Things I've learnt from miniature painting. You can use your most heavily pigmented paints to your advantage with cheap acrylics. Start by painting the whole aircraft in grey scale, mixing your black and white til you get the values right, and then since the coloured tubes of paint have very little pigment I them by comparison, you can tint the Grey's to the colour you wamt
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks for the info!
@ja37d-34
@ja37d-34 Жыл бұрын
Cool challenge and nice job!
@ja37d-34
@ja37d-34 Жыл бұрын
That paint vs the plastics tho.. Ouch.
@ModelMinutes
@ModelMinutes Жыл бұрын
thanks!
@SomewhatSummarized
@SomewhatSummarized 2 жыл бұрын
this makes me feel better as this is what my first 3 models looked like
@ModelMinutes
@ModelMinutes 2 жыл бұрын
:D
@SnakierElm62
@SnakierElm62 8 ай бұрын
I think the paint looks quite accurate to what some A6M5s look liked towards the end of the war, rushed and a little uneven, I like it
@ModelMinutes
@ModelMinutes 8 ай бұрын
thanks! Yeah, they didn't have the most durable paint at the time
@allanstott6999
@allanstott6999 2 жыл бұрын
Very nostalgic from my childhood builds.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
awesome :D
@chaosmann81
@chaosmann81 2 жыл бұрын
Painting a model with these colors would be easy if you prime the parts. By the way: your wet pallette is missing the membrane layer. Just use some backing paper. Your paint doesn't get watered down and will stay wet even longer.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks for the info
@APlaneGuylol
@APlaneGuylol Ай бұрын
normally I don't paint the paint the small cockpits because they are very easy to mess up however by just gluing it on no painting gives a cleaner look.
@huwtindall7096
@huwtindall7096 2 жыл бұрын
What a challenge! I'd have been looking for some £1 cans of couloured spray paint from the poundshop. A white and green would sort you for most of the model. Probably not the most authentic green ever but better than those horrendous paints! Excellent effort though and a thoroughly interesting challenge. If we have to do it with a brush then I'd be buying a big flat brush to make the painting of large single colour surfaces a bit easier.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
yeah, i did think about getting spray cans, but intentionally made it harder
@chris3091
@chris3091 2 жыл бұрын
This model was included in the starter set I got last year to start me on my model building journey, so it's perfect for a beginner. Those are also the brushes I tend to use, mostly out of convenience that they're cheap and expendable, although I agree you can't get the best detail with them.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Yeah, the brushes needed to be a bit finer really
@SuperGutbucket
@SuperGutbucket 2 жыл бұрын
During lockdown #2 I challenged myself to build and paint a kit with what was in the box. I used the Airfix Spitfire mk 1 starter kit. Very similar finish to your Zero.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Awesome!
@crazylocha2515
@crazylocha2515 2 жыл бұрын
Next Steps??? As a post Christmas follow up (sort of a "I got this as a present" what'd I do now). Most common gift card in the U.S. is a $20. What could or should you look for as a follow up purchase to improve on THIS challenge? Maybe take a directional line to something like the Mig paint kit for IJN planes set. Then broadening suggestions for AFV/ships/cars depending on the gift receiver's interests? Just suggestions. Mad mad respect for following through even though difficulties 👍. Fantastic idea and well done. Merry Christmas 🎄❄️🎄❄️🎄
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Thanks for the suggestion 😊
@hanssmidt12
@hanssmidt12 2 жыл бұрын
It looks cool
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks!
@ejcruz3520
@ejcruz3520 2 жыл бұрын
That looks fun. The only thing i regret is skipping hand brushing models and straight jumped to a cheapo airbrush set. I want to try airfix soon, i started on gunpla models.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
You should definitely give them a go
@dailyguy6189
@dailyguy6189 2 жыл бұрын
How do you get rid of brush marks? I’m having huge trouble when I paint because it looks so bad and there are so many brush marks and strokes. Please help
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thin your paints and use a soft brush
@arkadius8823
@arkadius8823 2 жыл бұрын
My first model I painted was Tamiya's Fw 190 D9 1/48 it cost me about 7£ (about since I'm not from Britain) and I was able to buy two brushes (one big and one small) two colours for the upper section of the fuselage and and one for the down section plus a black paint for wheels (didn't paint pilot and the interior of cockpit) and the model looks very good so if you add just a small amount of money you will be able to paint a good-looking model
@ModelMinutes
@ModelMinutes 2 жыл бұрын
sounds good!
@artistar71
@artistar71 9 ай бұрын
For a bonkers challenge, which it appears you were regretting, more and more, I say bravo.
@ModelMinutes
@ModelMinutes 9 ай бұрын
thanks!
@PhD777
@PhD777 6 ай бұрын
Wash the model kit in dish liquid (non citrus), rinse thoroughly and let dry before assembly and painting. Wash hands as well! Additionally, always remove paint from sufaces where they are being cemented together, as you want plastic touching plastic so there will be a strong bond. Otherwise, excellent video and it looks decent for £5 paint challenge!
@ModelMinutes
@ModelMinutes 6 ай бұрын
Thanks for the info!
@lumberjack0101
@lumberjack0101 Жыл бұрын
This video is just what I always looking for. Don’t really know if I should spend some money on professional paint and airbrush because I’m not sure if I will keep spending time on modeling for decades. I got some cheap acrylic paints at home and it doesn’t seem to works. Now after watching your video I know I should apply more layer, and I must say your result is totally acceptable by my standard.
@ModelMinutes
@ModelMinutes Жыл бұрын
Thanks! Proper modelling acrylics do provide a better result though
@BlaBla-su2yh
@BlaBla-su2yh 2 жыл бұрын
I've seen those cheap acrylic paints a few days ago and thought about trying them, I'm glad it's not 1999 anymore and there's KZbin to save you from some mistakes
@ModelMinutes
@ModelMinutes 2 жыл бұрын
haha!
@simonrichards6739
@simonrichards6739 2 жыл бұрын
Brilliant, the paint mixing bowl looks like a Jackson pollock/John Squire/stone roses album cover!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
yeah, im just seeing how long i can use it until it needs replacing :)
@simonrichards6739
@simonrichards6739 2 жыл бұрын
@@ModelMinutes when it needs replacement you could sell it as modern art.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
@@simonrichards6739 thats a cool idea :P
@GG-lx8rp
@GG-lx8rp 2 жыл бұрын
Nice video, watching the paint not covering would suggest grease or mould release on the plastic. Also I have found that the more you thin the paint (with water) the more likely this will happen.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
It is possible
@GG-lx8rp
@GG-lx8rp 2 жыл бұрын
This is totally irrelevant to the video but if you paint a House door this happens where people touch the door I use Sugar soap on these areas.
@stansenter2660
@stansenter2660 2 жыл бұрын
Looks fair to good for what a beginner on a budget would produce, the mottled green paint looks about right for an IJA Zero-sen stationed in the tropics, if you squint your eyes like a Japanese, (I can say that being half Japanese...lol).
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks for watching :D
@Kojak0
@Kojak0 2 жыл бұрын
I'm so happy I'm not a beginner any longer. Using that kind of paint hurts my soul.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
yeh, it was a bit difficult
@Corsario-ud1du
@Corsario-ud1du 2 жыл бұрын
Interesting challenge video. I wonder what would´ve happened if some sort of primer was used before applying the paint.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I would like to think that the paint stick better to the plastic
@JohnSmith-sl1my
@JohnSmith-sl1my 2 жыл бұрын
At least u gave it ago. Now back to the proper paints 👍
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Yup! :D
@Bob-bv9yj
@Bob-bv9yj 2 жыл бұрын
After watching your videos, I saw the one on the amazing airbrush kit…. Is there any possibility you Can do a maintenance or a cleaning video about it? I want to start looking into airbrushing but I have absolutely no gen on using one, or how to use paints etc…
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I was thinking of doing a bit of a guide on my lessons learned with airbrushing, so stay tuned for that in the future
@billmmckelvie5188
@billmmckelvie5188 Жыл бұрын
Forgive me for asking this, but what determines that any beginner will work on a £5 paint budget? Having formerly worked in a model shop, beginners usually come in and purchase what's on the box plus the bits you have recommended and their advantage such as Revell's needle glue applicator etc. When you spend time with them going through the model build, you can guarantee they will be back purchasing another!
@ModelMinutes
@ModelMinutes Жыл бұрын
I think it stems from personal experience, if I only have a small budget I’m probably going to try and get what I can
@MCDeltaTheta_BF1
@MCDeltaTheta_BF1 2 жыл бұрын
I really like the paint brushes from works especially the bigger flat ones
@ModelMinutes
@ModelMinutes 2 жыл бұрын
me too
@mbak7801
@mbak7801 Жыл бұрын
Did you wash the sprues with warm soapy water and then flush and dry before starting this model? It looks like the plastic may have a layer of release agent on it.
@ModelMinutes
@ModelMinutes Жыл бұрын
pretty sure I answered this in earlier comments, but I don't recall washing them. There could be some mould release on there but it wouldn't do much to improve the quality of the paint lol
@tomroland2315
@tomroland2315 2 жыл бұрын
Quite an interesting challenge. I find some colours are just a pain to apply and I use acrylic model paints. Perhaps finding a paint which has the best characteristic from your selection and using it as a primer might be a way forward. Then for the rest apply several thin coats with large brush. The lighter colour for the underside looked like it was going to be trouble since you can't use a dark primer and I've always had a problem with white and off-white shades. But hey, given the constraints good outcome.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks! yeah, that light colour was a right pain
@veikkakarvonen831
@veikkakarvonen831 Жыл бұрын
Little bit of un-thinned acrylic serves as a primer. I'm doing only my second model but this works as a primer for my Revell aquas.
@ModelMinutes
@ModelMinutes Жыл бұрын
interesting!
@123dodo4
@123dodo4 2 жыл бұрын
I have a problem with paint like this and its tamiya blue grey ish i think.. what caused it to be not stick and how do i fix it?
@ModelMinutes
@ModelMinutes 2 жыл бұрын
could be that there was still mould release on the plastic and it wasnt washed off, or perhaps the paint wasn't thinned enough. A base coat primer could help too
@muhammadkaindra1245
@muhammadkaindra1245 2 жыл бұрын
Nice new challenge
@ModelMinutes
@ModelMinutes 2 жыл бұрын
:D
@techyelliec1042
@techyelliec1042 4 ай бұрын
I would love too see you do a Tamiya zero
@ModelMinutes
@ModelMinutes 4 ай бұрын
thanks for the suggestion!
@LynxBlack
@LynxBlack 2 жыл бұрын
Think I'm gonna have to give model making a go next year, KZbin sure wants me to keep watching, down the rabbit hole I go
@ModelMinutes
@ModelMinutes 2 жыл бұрын
One of us!
@LynxBlack
@LynxBlack 2 жыл бұрын
@@ModelMinutes Very quickly becoming the case 😄
@lpjmodels
@lpjmodels 2 жыл бұрын
It's a deep rabbit hole indeed !
@LynxBlack
@LynxBlack 2 жыл бұрын
@@lpjmodels Don't say that I get sucked into things way too easy 😂
@ModelMinutes
@ModelMinutes 2 жыл бұрын
@@lpjmodels one of the deepest
@LightingSparks82
@LightingSparks82 2 жыл бұрын
I've everything you have but bought for playing with dioramas. Except the Zero been soooo tempted though.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
it's quite a good kit
@sgkingly8392
@sgkingly8392 2 жыл бұрын
Given the horrible paint, that engine actually looks okay. You did a fairly decent job to get it to look somewhat metallic
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Thanks!
@Feten56709
@Feten56709 2 жыл бұрын
i can only afford cheap paint for my model, the result are horrible and it need to be reworked (which i started recently) thanks for the video Mr. Model Minutes, really entertaining and helpful.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Glad I could help!
@tomo870
@tomo870 5 ай бұрын
Good video mate. Just returned to scale modeling after a 30 plus year break. Knocked up a couple of small 1/72 kits just to get my eye back in and practice some techniques. I've found that even with the dedicated acrylic paints (Humbrol/Tamyia) they don't like to stick to the plastics, especially when thinned. I know it wasn't part of the challenge, but for anyone watching who is brush painting, I've found that if you prime the plastic first the paint takes to the kit better. I bought an aerosol tin of Tamiya primer, only small that should last a while. I've also seen people washing their sprues before building but I've never done that yet.
@ModelMinutes
@ModelMinutes 5 ай бұрын
yeah, washing the parts and applying a primer can help a lot with the paint sticking
@tomo870
@tomo870 5 ай бұрын
Do you think those acrylics you used would apply better if you primed the parts first?. I'd be interested to find out. 😊
@ModelMinutes
@ModelMinutes 5 ай бұрын
@@tomo870 maybe, but the opacity would still be a problem I think
@MOS6510Models
@MOS6510Models 2 жыл бұрын
Great Video matey.. Im gonna search for acrylic paints for under a fiver to build a model with.. just to see if you can get artist paints to work
@ModelMinutes
@ModelMinutes 2 жыл бұрын
I look forward to seeing what you come up with!
@stevieb6173
@stevieb6173 2 жыл бұрын
yes please , do it and show the video 👍👍
@vasili1207
@vasili1207 2 жыл бұрын
as i use a lot of cheap paint go to home bargains and get the colvin and cowen paint in a tube... you can airbrush it and its sound as F
@ModelMinutes
@ModelMinutes 2 жыл бұрын
@@vasili1207 oooooooo
@vasili1207
@vasili1207 2 жыл бұрын
@@ModelMinutes no ric flair goes Woooooooooooooo! Merry Christmas mate have a good one
@timiskaming99
@timiskaming99 10 ай бұрын
Thanks for the informative video, apologies if this was asked already, but if the model was washed in soapy water and then primed ( I know that would be outside the £5 budget, say you had the £2 brushes already), do you think it would have worked better?
@ModelMinutes
@ModelMinutes 10 ай бұрын
It’s possible a good wash could have helped, but the paints were still pretty bad and I may still have experienced some degree of them not sticking
@timiskaming99
@timiskaming99 10 ай бұрын
@@ModelMinutes ok thanks, how about primer? Would that have helped?
@ModelMinutes
@ModelMinutes 10 ай бұрын
@@timiskaming99 I think it would definitely help
@noahdeng9401
@noahdeng9401 2 жыл бұрын
This reminds me of the first two model cars I built: 2 Lindberg cars in 1/32 scale. I got both of them at Dollarama for $3 each along with those block paints and made a big mess of the paints. However, most of the parts are now lost, with the main parts of the Ford Tudor in my time capsule which I will not open until 2025
@ModelMinutes
@ModelMinutes 2 жыл бұрын
oooo a time capsule, that is a fun idea!
@michaleeuwe
@michaleeuwe 2 жыл бұрын
For using inexpensive tools, you did get a good result with this 1:72 scale kit.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks!
@allanstott6999
@allanstott6999 2 жыл бұрын
Japanese paint during ww2 was actually bad anyway so you picked the right kit there. Good job with a tight budget.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
haha - yeah . . . maybe that's what i was going for :P
@itsmeoli3705
@itsmeoli3705 2 жыл бұрын
The Works coming up trumps in this episode! Great episode
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Haha one of my “go-to” shops for cheap art supplies. They even sell discounted model kits occasionally too
@itsmeoli3705
@itsmeoli3705 2 жыл бұрын
@@ModelMinutes same here! Mine never, ever seems to have any kits though sadly!
@julianmhall
@julianmhall Жыл бұрын
Watching this again I had an idea - which may or may not be viable. Use a length of sticky tape repeatedly put on and pulled off the fuselage and wings to make the surface slightly sticky and provide a key on the bare plastic. The paint may adhere better to that :)
@ModelMinutes
@ModelMinutes Жыл бұрын
That is an interesting idea
@paulwilliams9926
@paulwilliams9926 2 жыл бұрын
Did you wash the sprues before starting the build? This might have helped the paint to stick better.
@ModelMinutes
@ModelMinutes 2 жыл бұрын
yeah, it probably could have
@beercrazy5487
@beercrazy5487 2 жыл бұрын
i have bought those brushes as well and though they seem good to start they soon become very frayed at the ends as a cheap brush for painting diorama they are completly fine but for painting any kind of details are a waste of money the paints you used are useless but there is some pastal chalks that grind down to make a very nice brushable dust to use to show age ect nice job on the video and well done on carrying on because i am sure i would have stopped as soon as i saw how the paints smeared in the cockpit
@ModelMinutes
@ModelMinutes 2 жыл бұрын
i did want to stop but i stuck with it even though it caused a few headaches lol
@docBol1980
@docBol1980 Жыл бұрын
Have you ever tried adding some soap to the water used to dilute the paint.’a hint will do, fi bybstroking a wet brush on a slap bar
@ModelMinutes
@ModelMinutes Жыл бұрын
I think i have tried adding soap before and if i recall i wasnt a fan of the effect it gave
@Simon_Nonymous
@Simon_Nonymous 2 жыл бұрын
Aaaaaaaaaaagh - so I've just tried using a cheap box set of acrylics that I already had on a disused part that's big enough to give me a feel for it. Used a Humbrol no 4 brush from a starter kit to keep it real instead of my normal sable brushes. Even though I mixed up a grey undercoat, and degreased the plastic, and went as thin as I could with a bit of fairy liquid in the mix to help reduce surface tension... it wasn't good. I then tried an RAF dark green and dark grey pattern, not a good result, I can't get rid of brush stroke marks plus got different levels of glossiness and matt to the finish. Matt - you did very well with your effort considering!!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
thanks! It can be really hard using these kinds of paints
@hrmpug1092
@hrmpug1092 2 жыл бұрын
I’m actually surprised, first time I’ve seen a KZbinr upload a challenge that didn’t end well
@ModelMinutes
@ModelMinutes 2 жыл бұрын
haha, yeah, I wonder if they edit it to make it look like it always works . .
@hrmpug1092
@hrmpug1092 Жыл бұрын
@@ModelMinutes hey, points for honesty
@kingofcrimson4177
@kingofcrimson4177 Жыл бұрын
Tbf, even though I’m only on my second kit, one thing I have learned from my first kit was to always use a primer. Can’t use an airbrush though. Too many house restrictions. Only got access to brushes.
@ModelMinutes
@ModelMinutes Жыл бұрын
yeah, primer can be handy to help the paint stick
@Rowan407
@Rowan407 2 жыл бұрын
Flashbacks guaranteed on this vid, my first model was a dogfight doubles me110 and spitfire mk1a I still have both of them 😆 even if they aren't brilliant
@ModelMinutes
@ModelMinutes 2 жыл бұрын
nice!
@mowvu5380
@mowvu5380 2 жыл бұрын
i have no idea why this channel has been recommended to me. but i might get a bladdy arifix now
@ModelMinutes
@ModelMinutes 2 жыл бұрын
i'm sure you will enjoy it! Good to see the KZbin algorithm working :P
@IvanisIvan
@IvanisIvan 2 жыл бұрын
if only it was primed, this might have worked out much better!
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Maybe
@therebeginner
@therebeginner 2 жыл бұрын
I would not try to do such a challenge (even though I would be an ideal candidate, as a beginner), but it was very interesting watching you struggle with the (lack of) paint and nonetheless get something good out of it. I would really be curious to see how the paint would have behave with some kind of primer under it. Maybe a fiver was a little bit too little?
@ModelMinutes
@ModelMinutes 2 жыл бұрын
Glad you enjoyed it! Perhaps next time i'll do a £10 budget
@ambiention
@ambiention 3 ай бұрын
I wonder how much a layer of primer would’ve improved the finish. Some acrylic thinner too. Would’ve busted the budget, but it’d be interesting to know what specifically is causing the trouble. Maybe there’s a cheap way around it
@ModelMinutes
@ModelMinutes 3 ай бұрын
A primer may have helped, but I think these paints were so cheap that it would have taken considerable work to make them look good
Warpaints Fanatic and the Only New Paint Set That Actually Matters
21:28
Goobertown Hobbies
Рет қаралды 144 М.
Countries Treat the Heart of Palestine #countryballs
00:13
CountryZ
Рет қаралды 25 МЛН
She ruined my dominos! 😭 Cool train tool helps me #gadget
00:40
Go Gizmo!
Рет қаралды 35 МЛН
When Steve And His Dog Don'T Give Away To Each Other 😂️
00:21
BigSchool
Рет қаралды 17 МЛН
Best Model Kits for Beginners | Top Five Kits to Get Started
14:45
SpruesNBrews Scale Modeling
Рет қаралды 759 М.
Can I make and paint an Airfix kit in just 1 Hour?
15:01
Mann's Model Moments
Рет қаралды 22 М.
HOW TO: Brush Painting Basics
12:40
Curioventura
Рет қаралды 118 М.
10 Beginner Mistakes that are holding back your modelling - and how to avoid them
10:18
New to airbrushing? Beginners guide to painting scale models!
14:01
Scale Model Shed
Рет қаралды 22 М.
Airfix Starter Set Challenge.
20:05
LPJ Models
Рет қаралды 27 М.
5 Tips for Saving Money as a Modeller! | Quick Guide
7:39
Modelling Weekly
Рет қаралды 304 М.
Самая заниженная машина в мире!
0:31
ТРЕНДИ ШОРТС
Рет қаралды 3,1 МЛН
They exchanged their daughter for another child😢🙈
0:35
Senchiki_social
Рет қаралды 2,4 МЛН
اكلت كل الشوكولا🥹🍫
0:22
Zain -Alaa
Рет қаралды 13 МЛН