Cannon Restoration + Test firing

Restoration of an antique salute cannon from around 1860’s. I will restore this beautiful treasure and repair all the necessary defects and test shoot it with 3 salute cannon shells.
ABOUT THE SALUTE CANNON
This is an antique salute cannon bought at an auction here in Sweden. The cannon is from Hällefors Bruk in Sweden and this cannon is dated to be around the mid 19th century. The cannon is made of cast iron and is in two parts, the cannon stand and the cannon barrel. The two parts weigh around 14 kilos.
Hällefors Bruk was founded in 1652 and is well known all over the world for making solid cannons used for defense and battle. They are also known for making iron pipes, iron stoves, cast iron pans and a lot of other iron stuff.
THE RESTORATION PROCESS
I started by inspecting the salute cannon and directly took it to sandblasting. I sandblasted the cannon barrel and the stand and used regular sandblasting sand as my media with high (6.5 bar) air pressure.
After sandblasting I removed a lot of very fragile metal from the barrel using my new flexible shaft machine. I also removed a lot of excess iron from the casting process to improve the overall look of the cannon.
There were some marks on the cannon barrel that could indicate that the cannon once was deactivated and later activated again. But it was sold to me as a functioning salute cannon.
I did face a little problem with the cannon barrel though. After so many years standing outside in the Swedish harsh weather, the last 20 millimeters of the cannon bore was totally blocked by rust. That means it was unable to fire salute shots in this condition and had to be repaired.
So I drilled all the rust out of the bore with a very long cobalt drill and the supporting tool that I have made for this occasion to support the long drill and to ensure that the bore would be drilled 100% right so it could function correctly again.
There were a few holes in some very thin cast iron at the bottom of the barrel plus the bottom was hollow. So welding it was not an option. I decided to fill the whole bottom of the barrel with tin. And this repair turned out really well. After this I thoroughly cleaned the bore and I soaked the barrel in motor oil for a few days to ensure that there was oil in every little corner of the cannon. I painted the barrel black using heat and linseed oil.
The cannon stand was in really solid cast iron and painted and therefore in OK condition after all these years out in the weather. I did some minor grinding and refreshed the H for Hällefors, which was engraved in the metal a long time ago. After that I powder coated the stand in green army color and painted the bottom black.
I also cleaned the small cannonballs which came with the cannon. NOTE: they are only for decorative purposes since they don’t fit into the cannon bore.
I filled some old fireworks in the cannon and did 3 blank salute shots (all shot were blanks and I was using maximum 8 gram black powder) in a very safe and uninhabited area environment. So do not test this in your garage, please! Even 8 grams of black powder can be very powerful and cause serious injury and fire if used wrong.
I really think this restoration video turned out to be very good. Please subscribe if you want to see more cool upcoming projects 🙂 And DON’T FORGET TO SEE my F-4 PHANTOM II Aircraft Restoration - • F-4 PHANTOM II Aircraf... &list=UULFsCCifMby57qV_UmrYGladQ
And don't forget to subscribe to my channel!
Thanks for watching my channel. See you soon.
Best wishes and stay safe ❤ Martin.

[@AwesomeRestorations]

In this video I restore a beautiful Salute Cannon from Sweden - Please let me know what you think! ALSO SEE my Mechanical Toy Restoration 👉kzbin.info/www/bejne/bH7Hiaehq6qrnLs 👈Best wishes and stay safe ❤ Martin

[@_Mother_Of_A_yotube-Developer]

Заливать сталь СВИНОЦОМ, а после писать название «реставрация» 🤦‍♂️, да ты "ГЕНИЙ!"

[@AdamAdam97531]

Приветствую ведущего канала . Эта одна из самых неудачных твоих работ по реставрации , ты в начале ролика показываешь недостатки которые необходимо исправить но в деле оставляешь всё как есть не доводя свою реставрацию до совершенства как делал ты это ранее . Тебе за эту работу я ставлю неудовлетворительно .

[@welshirbny13]

You have high experience and workmanship, as long as I wish to do the same as you, but I do not have much patience. I hope that you will visit Egypt one day and host you with me.

[@animalsaver2127]

Omg u look like the guy from breaking bad

[@fundicionmarcelserio]

Las marcas que tiene la base que conservaste también son defectos en el proceso de moldeo en la fundición , al igual que la parte que rellenaste con metal ! Saludos buen trabajo !

[@nataliecarrington2550]

The love and care you put into restoring and preserving these old treasures - "preserving the beautiful signs of old age", as you said it - brings me joy. Thank you!

[@AwesomeRestorations]

Thank you for watching 😉👍

[@djnone8137]

I told my wife she should preserve the beautiful signs of old age like AR does in his videos I'm now watching Awesome Restorations from my garage on a futon because she threw me out again 😊

[@celalmehmet]

I am an old guy who just occasionally repaired a broken vase here and changed a bulb there but nothing important. Watching your channel how you are skilled and experienced I can only wish you good health and prosperity 🙏

[@AwesomeRestorations]

thank you so much Mehmet I am really glad that you like my my video. I also wish you and your family all the best 😊

[@grandpaweber2097]

This video brought back a lot of memories. I spent 16 years re-enacting the American War of Independence, much of it serving cannons. As I watched the video, all I could think of was the loading and firing sequence. All of the cannons I served were beautiful reproductions, brass and iron. Good video....now go buy a swivel gun!

[@AwesomeRestorations]

Yes Grandpa 😉👍

[@HasanAhmed-ex6jv]

Not only this project show that you are a true artist but it also revealed your inner child, the one that likes fire and bang.

[@user-gy5tb9tw9x]

Не перестаю удивляться твоему мастерству, у тебя золотые руки и очень хорошая фантазия! Ты лучший мастер во всем Ютубе!

[@AwesomeRestorations]

thank you so much 😊

[@gentium1]

А разве лучший не My Mechanics? 🤔🤔

[@mitrogulf4073]

@@gentium1 Они все мастера в своём деле, надеюсь таких умелых людей будет как можно больше )

[@Redneck_Hero]

I can't help but feel like you were smiling when you said "it's time to clean the balls"😅

[@masterthreeok]

Hahaha. The same here

[@anoskov7820]

"To polish balls" he said

[@georgejones3526]

@@anoskov7820 Both. 09:07 - “It’s time to clean the balls.” 12:00 - “Polishing the balls.”

[@theluth9046]

Well, we need to get our minds out if the gutter,NOT! I loved this comment!

[@capers72424]

Oh, he ABSOLUTELY was!

[@user-mu6iy1iq9q]

Сколько смотрю не перестаю удивляться, это самое главное в вашем творчестве, продолжайте и дальше нести людям радость, творить и удивлять, Дай вам Бог, здоровья и любви.

[@AwesomeRestorations]

thank you so much for your comment I really appreciate it

[@user-jx3hb5cf9r]

Уважение и одновременно добрая зависть. Заниматься любимым делом, получать от него удовольствие и делиться радостью от процесса с другими! Удачи!

[@jamesswann9852]

So clever! Always respectful of the item being restored and the results are amazing. Bravo!! 😊

[@AwesomeRestorations]

thank you very much James

[@user-li8nc7xu3d]

Всего доброго, Мартин. Воскресенье, солнечный день. Весна🌷. И всё таки не перестаю удивляться: сколько разных вещей можно увидеть через много лет. Здорово, что есть такие люди, которые позволяют нам увидеть их вновь. Нравится смотреть Ваши работы. Обнимаю, жду новых встреч, процветанию канала. 🇷🇺Пока, Мартин. 😘🎉🎉🎉🎉🎉🎉🎉

[@AwesomeRestorations]

thanks a lot for your comment. I wish you a happy Sunday 😊

[@coloradomountainman8659]

That rotating work bench caught me totally off guard. How cool is that! Gave me some great ideas for my own shop!

[@AwesomeRestorations]

Glad to hear it!

[@bbullock1982]

Awesome job, and yes other than Animal, Beaker was one of my favorites. Had to comment when you asked if we knew those guys. I enjoyed the work you've done and the time you've put into actually sharing the process of what it takes to restore things. Lots of prep and thought goes into the proper restoration work that most people overlook.

[@AwesomeRestorations]

Beaker is really a fun character :) very glad you liked the video thanks for watching

[@-n3v-]

Watching you work, with all the knowledge and experience behind you is truly an awe inspiring watch. I admire your care and attention to detail as well as the respect you show for the items you work on. Great video. 😃👍🏻

[@AwesomeRestorations]

thank you very much I am glad you liked the video 😊

[@y.sereda]

it's so soulful, every video, every new restorations. 18 mins for watchers vs dozens hours of restoration work. It's AWESOME! ty😊

[@AwesomeRestorations]

thank you so much 😊

[@Sasori_Akasuna]

Здравствуйте, Мартин. Большое спасибо за проделанную работу, очень интересно наблюдать за работой настоящего мастера!👏👏👍

[@AwesomeRestorations]

thank you so much 😊

[@thatrandomgamer8258]

I looked on in terrified awe as you picked up the base at over 180 degrees Celsius with your bare hands, barely flinching. You, sir, are truly a different breed.

[@AwesomeRestorations]

my hands are dead from burning them 😅

[@jorgeandreszanocchi6485]

What can I say, Martin... Every antique artifact that you restore comes back to life. And I'm sure that whoever owned them in the past, wherever they may be, bare a smile on their face. Thank you, Maestro!!!

[@AwesomeRestorations]

thank you so much I really appreciate it :)

[@nickmaylock94]

Спасибо за видео, Мартин! Как всегда очень завораживающе, восхитительно, и с любовью! Очень круто!!!

[@AwesomeRestorations]

thank you so much Nick

[@georgeshelton6281]

Finally, something that just came out of the 18th or 19th century! It's what it looks like to me.

[@Maksim-Perepelica]

Спасибо вам за очередную шикарную реставрацию !!!!!!!!!!

[@AwesomeRestorations]

thank you very much for watching 😊

[@ALPHASASYLUM]

Yet another excellent restoration by the Awesome Martin. I love that you left the old degradations in the material to show the age of the piece. The repair of the cannon itself was on point. Keep up the good work Martin. I always anticipate your next project.

[@AwesomeRestorations]

thank you very much really glad you liked it I also think it turned out very well 😊

[@user-ge8or1kj7u]

Thanks for your hard work

[@marchills4131]

Still trying to put a finger on exactly why your videos are so relaxingly satisfying, but they are. Really enjoy your work and, of course, your craftsmanship is amazing.

[@sulai6i]

Great job on the restoration of the antique salute cannon! It's amazing to see how it went from a rusted and neglected piece of history to a beautiful and functional cannon once again. The attention to detail and the dedication to preserving history is truly impressive. Thank you for sharing this incredible restoration process with us!..Thank you from Qatar 🇶🇦 🇶🇦 🇶🇦

[@AwesomeRestorations]

thank you very much for watching I am glad you liked the video 😊

[@brucek6563]

Your talent never ceases to amaze me. You do such amazing work bringing those antiques back to life!! Something tells me you were as excited as a young boy when you were firing those powder charges!!! That had to be fun!!!

[@AwesomeRestorations]

thank you so much for your comment I am very happy that you liked it

[@brucek6563]

@@AwesomeRestorations You're welcome!

[@a_h69]

كل يوم اشاهد الفيديوات الخاص بيك ممتعه متابعك من العراق 🇮🇶❤

[@rixxroxxk1620]

Thank you keeping the antique look to the casting. I think that makes it all the better when it looks old (because it is) and it is still functioning! Great restoration as usual! Feeling bad for Beaker though🤣🤣

[@AwesomeRestorations]

many thanks :) Beaker is ok again now and ready for new adventures 😊

[@patpeters6331]

You never cease to amaze me. Your attention to detail is incredible. I always read the story in the description box, so thank you for your detailed explanations.

[@AwesomeRestorations]

thanks a lot foe watching I am really glad that you liked it

[@czifear]

Какой чудесный день сегодня! Спасибо за видео, друг!

[@AwesomeRestorations]

thank you very much for watching 😊

[@lhallstrom]

When measuring the inside bore of a muzzle loading anything, and the bore doesn't reach the touch hole, you should make sure that the obstruction isn't a ball with powder behind it. Many muzzle loading guns were put away after failing to fire and found many years later still loaded. Drilling into an old load could be very exciting.

[@therealbeedubbs35]

Might be my favorite one yet, it’s restored, but still looks old at the same time, I love it. Great job.

[@AwesomeRestorations]

Thank you very much!

[@yatodante1664]

Твои видео интересно наблюдать и они успокаивают.

[@AwesomeRestorations]

I am really glad that you think so thanks for watching 😊

[@RuthlessGaming5849]

Well done, my friend. Stellar job as always 👌

[@AwesomeRestorations]

thanks so much Richard

[@andreaflores2992]

Admiro su inteligencia, y el amor que pone en su labor❤

[@tomsmith2688]

The music choices are incredible

[@prodigy7635]

Как всегда,работа на высшем уровне!

[@AwesomeRestorations]

thank you so much

[@Shitty_dino_fan.antifurandlgbt]

@Prodigy тоже фан Продиджи? Одобряю! Тоже их слушаю!

[@prodigy7635]

@@Shitty_dino_fan.antifurandlgbt 👍👍👍

[@prodigy7635]

@@Shitty_dino_fan.antifurandlgbt Как можно их не слушать? Легенды!

[@Shitty_dino_fan.antifurandlgbt]

@@prodigy7635 согласна!

[@Ofthe7thSon]

Bloody nora mate. Not only are your restorations epic but the delivery is top notch. Well done, simply amazing.

[@AwesomeRestorations]

many thanks Andy 😊

[@Ofthe7thSon]

@@AwesomeRestorations more than welcome mate. The manner in which you deliver the amazing work is unbelievably entertaining and a joy to watch.

[@zaffarmohammed2984]

These beautiful cannons were practical objects to defend beautiful landed gentry their estates. They were used to fire upon criminals who tried to steal or damage Good restoration

[@AwesomeRestorations]

thanks for your comment 😊

[@arturmessi1482]

Навыки дантиста, пекаря, бармена и др. помогли Мартину воссоздать пушку для праздников. На радость зрителям его чудесного канала!

[@AwesomeRestorations]

thank you very much :)

[@verngfeller3906]

That was in rough shape unfortunately but you did a great job bringing it back Was also interesting to me how you made the loads & fuse . Thank you for bringing it to us all the best to you 👍

[@AwesomeRestorations]

thank you very much for watching I am glad you liked it 😊

[@veraduarte1117]

Você, como sempre arrasando. Belíssimo trabalho!!!!!!!!!!! Ficou perfeito..

[@AwesomeRestorations]

thank you so much I am really glad you liked it

[@jpshipwash6240]

Watching each one of your videos has been like a meditation session. I feel indebted to you for what you do. Thank you.

[@AwesomeRestorations]

thank you so much for watching 😊

[@RandomContent57]

The box cutter was actually really satisfying

[@AwesomeRestorations]

yes its a really nice cutter

[@LegendRestorations]

Wow, I was completely blown away by this video! Your attention to detail is truly impressive. I can tell that you put a lot of effort and passion into creating this content, and it really paid off. As someone who is always looking for informative and engaging videos, I'm excited to have found your channel. Keep up the amazing work, and I can't wait to see what you come up with next!

[@JB-yb4wn]

Restoring an old Russian nuke.

[@ToolApc311]

The amount of knowledge this guy has is astonishing. Unbelievable . Well done

[@AwesomeRestorations]

thanks so much

[@saidelatbani3144]

سلام .... انت مبدع وفنان رائع .... لك سعة الصدر الرحب و دقيق في عملك .... شكرا

[@AwesomeRestorations]

thank you so much 😊

[@rohitatyoutube327]

Liking and commenting on your videos 😂 feels just like a routine habit ❤❤

[@AwesomeRestorations]

which I very much appreciate Rohit 😊❤

[@_Julie_Bee]

WOW! What an amazing transformation!

[@AwesomeRestorations]

thanks a lot

[@GeorgeF.106]

You’re a genius, man. That flip work bench is worth it’s weight in gold!

[@AwesomeRestorations]

thank you so much 😊

[@alaaalsaher-tp9xz]

Very cool work, well done creator, may God protect you

[@AwesomeRestorations]

Thank you very much

[@user-ie4hj5wd4i]

Приветствую 🤝✊ всё просто замечательно 👍 ты как всегда очередную вещь,вернул в строй вернул к жизни 🤝✊👍👍👍👏👏 Спасибо с большим удовольствием смотрим за твоим творчеством 🤝✌️🔥 Благодарим Тебя!

[@AwesomeRestorations]

thank you very much I am very glad you liked it 😊

[@andreysever417]

Впечатляет! Спасибо!

[@AwesomeRestorations]

thanks a lot for watching :)

[@einarhornraiser9019]

Disfruto viendo cuán cuidadosamente trabajas en estos proyectos de restauración. Magnífico trabajo como siempre!

[@AwesomeRestorations]

Thanks a lot 👍

[@congoparrot]

ive been wanting one of those salute canons for years.

[@AwesomeRestorations]

I understand that they are really cool :) Imagine wakening up your nighbours every morning witha salute 😂

[@Ne_dishi]

Это очень, очень круто мужик!!))) всегда приятно наблюдать за твоей работой!)) спасибо за то что ты делаешь))

[@AwesomeRestorations]

Thank YOU for watching 😉👍

[@MarcelloCruz1610]

Que restauração incrível!!! Gosto muito dos seus vídeos 👏🏻👏🏻👏🏻🤘🏻🤘🏻

[@AwesomeRestorations]

thanks so much 😊

[@tonysnegoff237]

What a pleasure to watch someone that really knows their craft...right down to the fuse making Thank you!

[@AwesomeRestorations]

thanks a lot for watching Tony :)

[@miguelangelurbanomartinez1983]

This type of videos are great. Since I discovered almost 5 years ago. At the day of today, im proud of myself to be a industrial mechanic. THANKS.

[@AwesomeRestorations]

glad to hear that 👍😊

[@tywatson9085]

Excellent work on this restoration. I enjoy watching all of your videos, keep up the amazing restorations

[@AwesomeRestorations]

thanks a lot

[@TheNutter44]

you are truly the master of restorations and i thoroughly enjoyed the video keep up the good work and i look forward to your next restoration video bro

[@AwesomeRestorations]

thanks a lot Daniel I really appreciate it 😊

[@TheNutter44]

@@AwesomeRestorations your welcome bro

[@shaunbrowne5139]

I think you are hugely talented sir. I don't know anything about metalwork, however, you piqued my curiosity from start to finish. Bravo my man !

[@AwesomeRestorations]

thank you so much I am glad you liked it 😊

[@NurkePL]

I like the workshop fridges and their contents :) All workshops should be equipped thus

[@AwesomeRestorations]

Yes, CHEERS 🍻

[@HeartLander74]

Always fun to watch your videos, quality time well spent! Also, always liked the look of these old cannons, so it was a bonus, you could say! If you are given the chance of restoring a real-size cannon, that would bring a huge smile on your face (and ours!). Nice one (again)!

[@AwesomeRestorations]

many thanks I am so happy that you liked the video :)

[@user-th9ql8di6e]

Прекрасная пушка , прекрасная работа!!!👍👍👍

[@AwesomeRestorations]

thank you very much

[@edwinbolivar3772]

Excelente trabajo, admiro la dedicación y el amor que le coloca a estás restauraciones 👍

[@AwesomeRestorations]

thank you so much :)

[@nothingpublic377]

The most satisfying channel in YT! Thanku sir for creating this content.

[@AwesomeRestorations]

Most welcome!

[@bilbobaggins9552]

I'm afraid to imagine how much this nineteenth-century rarity cost you. In any case, I'm sure it was worth it. Everything that falls into your golden hands takes on a new life.

[@pierinho97]

seeing how you restore objects is one of the most beautiful things I've ever seen, congratulations for the effort you put into it ❤

[@AwesomeRestorations]

Thank you so much 😀

[@pierinho97]

You're welcome 😊

[@PeocTaT1]

Огонь! Спасибо автору за то что делиться своим опытом и знаниями. Хорошая работа, так держать!

[@johnbuchanan6045]

It’s not about the destination but about the journey!

[@Einherjar_17]

As always, a great restoration job worthy of a master craftsman, and a great editing job on the video, thank you very much for sharing. I think your next video will be the restoration of the vise, right? 06:38 It's very rusty 😁, I send you a big hug from southern Argentina.

[@AwesomeRestorations]

thank you so much and thanks for watching I am really glad you liked it 😊

[@lucasmoura9751]

E vamos a mais um vídeo perfeito, toooop , parabéns, e obrigado por alegrar nossos domingo. Aquela morça precisa de restauração, podia fazer para nós 😂 🦉

[@AwesomeRestorations]

thank you so much Lucas happy Sunday to you too 😊

[@user-qh1jn7ch9l]

Не перестаёте удивлять, Мартин.Работа как и всегда -на Высоте.Удачи.

[@gzolenogozlo1924]

Upon the Other Projects I thought it’s going to be Much Better and have More details depth Restoration So this Time I’m not going to say it’s AWESOME

[@user-ms3lm5jj7c]

За ваши работы только👍

[@AwesomeRestorations]

thank you

[@user-fc7mi2rl3c]

Не перестаю удивляться вашему мастерству😮 Пушка получилась очень интересная😊

[@AwesomeRestorations]

thank you so much

[@user-to4xh1fz9g]

أنت إنسان رائع وكأنك تعيد الأموات للحياة وتعطيهم فرصة ثانية للإستمتاع ومواصلة عملهم الذي وجدوا من أجله ,,تحية عظيمة

[@AwesomeRestorations]

thank you very much for your kind words :)

[@essex3777]

I can't believe you keep all these really high quality, morden and possibly volatile chemicals in old-timey glass corked bottles like you're a hardware store Witch Doctor

[@rohitshukla9756]

Dear Martin, This one is magnificent. Very meticulously done. Keep it up 🙂

[@AwesomeRestorations]

thank you very much Rohit 😊

[@NeoN-PeoN]

Why were canons black, anyway?

[@liamthecoolone3196]

Becuse it made it easier to see and load it after shot

[@TAG77]

Because they were blued to keep from rusting. It’s a heating and oil process with the iron that stops rusting that leads to decay when at sea on naval ships of on the battle field with rain.

[@ronaldjohnson1474]

I remember kids could order similar cannons from a comic book ad up to the 1960's. Of course, yours is much older & deserves reverence. Well done!

[@AwesomeRestorations]

thank you so much

[@DC-vw7yf]

Martin, since yesterday I have been binge watching your videos. You are nothing short of astounding! Think about doing a Q&A with your subscribers please!

[@AwesomeRestorations]

I might, maybe 😉👍

[@user-ow8ru9dg8j]

Привет друг,все как всегда супер👍👍👍

[@AwesomeRestorations]

many thanks

[@user-vq9pf6hq9v]

Здравствуйте,Вы очень талантливый и увлеченный человек!👋 Прекрасные работы по реставрации,столько вложено труда и мастерства👍❤️

[@AwesomeRestorations]

thank you very much 😊

[@DerTeufelImDetail]

as always: AWESOME ... i love the little Beeker! Made my day!

[@AwesomeRestorations]

thank you so much I am glad you liked it 😊

[@discteto]

En sus manos los resultados de su trabajo siempre son extraordinarios maestro

[@AwesomeRestorations]

Thanks Martin 👍

[@user-ht1sk3mk9x]

Как же я ждал момента когда из нее будут выпускать снаряды) радовался как в детстве=) Спасибо Вам за проделанную работу и подаренные эмоции!

[@AwesomeRestorations]

thank you very much for watching :)

[@jenniferwilson1481]

@@AwesomeRestorations you are the best

[@user-lb1xi3yt6j]

I really love your care and attention to detail on this restoration

[@AwesomeRestorations]

thanks a lot

[@shannonalaminski2619]

Looks good! And I loved Beaker. I think Mr. Bill would've enjoyed watching that restoration. Up close.

[@AwesomeRestorations]

thank you so much. I hope he would have enjoyed it ❤

[@bjhaynes7502]

Poor Beaker! Love that you use powder coat.

[@Sergey_Zviagin]

As always the work of the master at the highest level! I am very happy when something has a second life. thanks for your efforts👍👍👍

[@AwesomeRestorations]

Wow, thank you!

[@ohheyitsjoshhinac495]

Your brave for firing a fractured and chipped cannon. Respect.

[@yorkshirejoinery2869]

Delicate but thorough ‘Ball’ work!

[@AwesomeRestorations]

👍👍

[@julienbailly3830]

Hello, always a great pleasure to see videos of all the time you spend restoring and bringing these objects back to life. I hope you are happy with your new equipment.

[@AwesomeRestorations]

thank you so much Julien. I am very pleased with my new tool :)

[@julienbailly3830]

@@AwesomeRestorations 👍 oh happy for You here is the start of a new adventure with great projects to come

[@user-nq1rb4rs7i]

Martin SUPERrrrr...!!!! SUPERrrrrrrrR..MARTIN..!!!

[@AwesomeRestorations]

thank you so much

[@mnhoss2100]

Nice project Martin. I like the powder coating. First I will buy a sand blaster cabinet so I can clean my old snowmobile parts. 🤟👍🤟

[@AwesomeRestorations]

thanks a lot - sounds like a good plan :)

[@wayneandrus240]

Very excrellent machine work and a very great knowledge of metal produced a very beautiful cannon!

[@AwesomeRestorations]

thank you so much I appreicate it 😊

[@talleyrand2739]

having an 1820 9lber from Carron steel works, re sleeved with seamless high pressure steam pipe,epoxied and with lock pins with a end pug welded and pinned, , and rebouched the touch hole,made from a brass bolt screw fitted and epoxy, ,has been running now for 25 years 250/350 gram charge 1f or cannon powder in a cartridge ,can make a quill with paper straws if you wish to run that way ,touch hole should be .22 cal in your case smaller that way loose less of the charge and burn out the touch hole great job done ,my last was a 6lb navel, rats nests in the barrel rust,had sat in a chook run for years , and like you had to rebore basically, made a mandrel ,fitted a plug and took hours with a 300rpm very large drill and kero,and different grit belts made to fit the mandrel ,exterior with a small grinder ,flapper discs again took hours while sitting in a cradle weighed about 1 a ton , never again

[@daffster13]

One of the most enjoyable restores in a while. Thank you sir

[@AwesomeRestorations]

thank you so much for watching :)