CAPPUCCINO- Engine Assemble

Mechanical Stig speaks words of wisdom as he pieces together the cappuccino engine!
Benny's Custom Works brings you everything automotive!
Weekly Episodes right here on KZbin, as well as the shop with new & used performance parts for most Japanese makes and models.
/ bennyscustomworks
/ bennyscustomworks
Benny makes this stuff look like a walk in the park. Please consider the risk factors and talk to a qualified mechanic, as well as a psychologist, if you’re thinking of attempting anything you’ve seen on the show.
Take into consideration your safety, the safety of others, as well as your vehicle’s best interests- warranty, etc.
Unless you’re trained & qualified to do so, we don’t recommend modifying your vehicle in any way. Stickers don’t add HP unless installed correctly.
Music: / monarchaus

[@_Skim_Beeble]

Benny makes that engine look smaller than it really is.

[@skitzvitz]

Was thinking. Either that is a bike engine or Benny is a big boy.

[@wayfaregear]

Nah, its just that small hahah

[@ConstantlyDamaged]

Just finished watching a video of people reconditioning V12 German tank engines. I thought he was working on an oil pump...

[@TheVeyron623]

Yeah, the engine is only 657cc. It's tiny, meant to fit in with the 660cc kei car regulations. Stock, it made 47 kW (63 hp). Or so Suzuki claim, since that's the maximum power limit of the same kei car regulations. Japan have been known to make dodgy claims to get out of stuff like that. Like the 276hp Gentleman's Agreement. By the end of it, there were cars, like the R34 GT-R, making about 330hp stock, or, as they claimed, 276hp.

[@catfish552]

@@ConstantlyDamaged Tank Museum Workshop Diaries? :D

[@clintwhite4372]

Man, that engine is tiny. But I really like the detail Benny goes into while explaining the processes he's going through. Very thorough. I dig it. Cheers, Benny :)

[@Camhin1]

Bcw vs MCM vs skid factory vs nugget garage! This is an awesome time for Australian automotive KZbin channels. Edit: and TasTuned!

[@TasTuned]

don't forget TasTuned!

[@PeteM.]

Thanks for the upload Benny! 😁😁 Love the new work area!

[@SteamGeezerUK]

Some pro tips in there, particularly about the use of sealant. I've seen quite a few OHC engines that have fried the camshaft because some genius spooged about a ton of sealant on it and blocked all the oil galleries. I would also recommend changing the water pump and idler pulley/tensioner when changing the timing belt - it's amazing how often a previously fine water pump will fail after the belt is changed.

[@ThatHoodlum19]

Why am I only just finding Benny’s channel now!!?? Hell yes!

[@ThatHoodlum19]

Quality stuff, as expected! Keep it up bud

[@Quadcore14]

Unreal channel, been following MCM since the beginning and it is great seeing Benny making his own awesome content. Great new space for filming also 👍🏻

[@hammatime94]

Same, I also love watching the skid factory and the haltech videos with scott (tuning fork)

[@stephenhegarty]

Great tip on using the stone to flatten the head but don't forget to periodically flatten your stone.

[@warummussmeinnameangegeben6502]

The block is so cute next to Benny! :D

[@HomeBuiltByJeff]

Great video guys. They are getting better and better on each one.

[@eppyz]

Whoever does the editing for that intro did a frickin amazing job 👍

[@alifadaei2217]

Watching Benny is like watching a heart surgeon doing an open heart triple bypass. He is sooooo good at what he is doing.

[@letpigsfly]

Im really enjoying these videos. Informative, full of nuggets of info and interesting to watch. Cant wait for future uploads.

[@notold37]

Thanks Benny for your wealth of knowledge, great tips for rebuilding an engine, love the videos, great series 👍🏼👍🏼👍🏼👍🏼

[@vlfreak]

great job, loved the production and the new work space as well

[@hammatime94]

Love your work benny. So informative and professional.

[@gafrers]

Love the Cappuccino. Great new work area. Keep up the awesome job.

[@realengineaddict]

Love the in depth content!!! Awsome!

[@EtoDemerzelSpaceBurial]

Loving the content so far! I like that there are a couple of projects going on at the same time

[@bloody_pinata]

This was class Benny

[@alastairc.5219]

Love the video mate. Have to attempt the same on my F10A shortly - cheers for the inspiration.

[@cyclonicleo]

Nice one Benny, well done!

[@robertreed1605]

Good job Benny and G

[@WARCHIEFf93]

I wanted Benny to get his channel up cause i knew it would have sick stuff!!! Love the vids

[@MrZX1206]

You're working on a 3 cylinder and Al is working on a 12. What's he overcompensating for?

[@alifadaei2217]

Hahahahahaha

[@SprayIgniteBoom]

small kick stand!!!

[@cluamica]

Really enjoyed watching this one!! Great job!

[@Zengawolf]

Congratulations on the new workshop

[@leedawson8188]

Great vid, keep em coming benny

[@andybobandy641]

Welcome to the You Tubes, Benny! Bout time you got your own show! Looking forward to watch what you got coming up for us. Love your work! Glad you're doing this.

[@JoeJoeMoto]

Awesome mate. The new work space looks awesome.

[@brett174]

Quality work and quality video Benny. Nice tips. Easy to see why you, MCM, the Skid Factory and Tuning Fork all get along. Top quality viewing. Thanks.

[@noetorres6]

Bro, hell yeah!!! New to this channel, and I'm hooked!

[@alexhilberts2666]

awesome to see a video on a cappuccino. Seriously my favourite car

[@jimmyjohnson2827]

Good content thanks Benny

[@nzpork1]

Cant wait to see where this channel goes. Looking good so far.

[@TurnMaster]

Think i need to send my Cappuccino to this man for a complete rebuild !!

[@dw2176]

I remembered the F6a to be bigger than this in real life, Benny has dwarfed it down to one of those haynes engine model kits.

[@ifgezroxy]

You can clearly see, that Benny is pro. Knows what he is doing, and knows how to explain clearly what he is doing and why. Nice stuff, always liked Benny. 😊

[@mrchrisk36]

Awe cute little engine lol! Great stuff Benny!

[@Thunderbr3wn]

Benny your a great presenter! Keep this stuff going you will definitely succeed with your own show.

[@MrMango222au]

excellent tip with the soaking of the stone Benny

[@brianbob7514]

Everybody is getting a channel! Awesome!

[@rowan2128]

I don’t know what it is, but your vids Benny are just awesome and relaxing to watch. Your very informative and explain stuff very well. Great vid Benny

[@SprayIgniteBoom]

I love that U build the correct way and don’t cut corners. Benny. U R the MAN!!! 🧨💥💪

[@Raukoriss]

Great vid mate.

[@michaellott918]

Pretty interesting little engine, thanks for the share!

[@TheMrFishnDucks]

Very cool. Keep up the good work.

[@smevox7490]

Thanks for the content!! This is amazing1!

[@jasonparry6791]

Bloody amazing

[@NoOne56488]

it's good to clean your deck, you don't want a dirty deck! ( say with kiwi accent )

[@glensgraphix]

And if you trim around your deck it will look bigger too.

[@ChristofUK]

kzbin.info/www/bejne/qpPEq3qMp8eBY8k

[@mickusms700]

@@ChristofUK kzbin.info/www/bejne/gYiYo5usoqaoZsU

[@ChipsNeeson]

Show us your deck.

[@wayfaregear]

Great video Benny, some great info here! Would love to see an unedited cut of the disassembly and reassembly, itd be a great reference for not only mine but other cappo owners!

[@Evolucion7]

Individual cam boxes instead of a valve cover is bloody genius.

[@RisetoSlide]

that was epic bro! loved it keep that cappuccino content coming!

[@dungeonsource]

Those stones are good for file finishes in panel beating aswell 👌👌

[@pug2o5]

Such a cute little motor

[@ultrasupergeek]

Nice to see this rebuild of an f6a and the cam box seals. I need to replace my cam box seals on my autozam az-1 with same engine.

[@thejultan]

Loving the BCW channel!

[@michaelgleeson1198]

Great episode of the F6A Cappuccino engine rebuild and only a Monster Sport cylinder head gasket and non of the other goodies made by Monster Sport Japan

[@jonathanwilson2]

I wish I could give more than one upvote. Can't wait to see more :)

[@allanbutlin5553]

Thanks Benny.

[@StreetDreamzTT]

Great vid dude. Job done right.

[@alexswenson400]

Holy shit that engines cute, I had a sony discman in 2001 that was bigger than that!

[@CiLyXx]

How good were sony discmans

[@mrgreenswelding2853]

Hi ben, just found your channel. I have been watching mcm and the skid factory for sometime now and glad to see youhave yourownchannel too.

[@cynzhero62]

Thank you sir!.

[@tomanycooks]

i like the style of filming benny. good shiz

[@treble8870]

Really enjoying your new Chanel have a good one mate!

[@MetalMike50]

Ah yes, that fine Chanel Eau de Cappuccino

[@shadowsandfire]

Look at you STEPPING IT UP! go hard man, looks great, the editing is very MCM but thats not a bad thing :) thanks boys, this is epic keep it rolling!

[@stueypooy22]

Starting coarse and finishing fine. who told you my bedroom technique?

[@dalesaward1227]

He does produce content just not on avenues such as KZbin haha

[@HuqBhai2246]

Maaaaad I love seeing head gaskets being installed

[@bmwbob86]

Nice work Benny! It's nice to see the right way to do things... Although it would be really cool to see some mods to that tiny motor, a turbo upgrade would have been pretty easy with the engine out?

[@joeclark709]

Sweet video 👍, keep up the good work

[@chrisw3771]

I've always used a sheet of glass & valve lapping paste to dress the surface of a head or blockend to end at the same time to get it even. Never tried just a stone.

[@miatafan]

Team boosted just made a video about a one rotor build. And I suggested a cappuccino! What a fun little car

[@Evolucion7]

The worst part about watching MCM, Benny's Custom Works, and Skid Factory videos is the overwhelming feeling that I was born and raised in the wrong country.

[@denisk3064]

First look at the block looked like a toy haha love it

[@marks7494]

love benny vids

[@Island_Times]

I have garage envy now :)

[@vomdeich1011]

We use exactly this process including razor, oil stone and wd40 for preparing mating surfaces in high precision jigs assembly

[@gazza116]

when using the oil stone method with the pist0ns in put a smear of grease around the top of the piston and bore, no grit gets into the rings.

[@procrastinator1842]

Turbo yoda is gonna love this motor in his ride on mower, just gotta get it back from Millsy...

[@82leone]

I love the intro tune is there a full version 😉

[@kamanski]

Loving the vids Ben (and team?)

[@nathanielbarbeau4821]

Cams built into the rocker cover? That’s pretty cool!

[@joshuarhoades2740]

Just watch all of the vid. , Legendary!🦄

[@marc9283]

those camboxes are interesting. Never seen that before. Are the cams mounted with bearing caps in there like on a "traditional" DOHC engine?

[@Subydude-rp9yv]

I love that little car. I've always wanted a tiny rwd car that would take a Yamaha 3 cylinder engine from my snowmobile. 9000rpm 180hp would be a ripper

[@AF29007]

I didn't realise Monster Sport did capp stuff... I only ever knew them as a supplier for performance Swift stuff

[@CaleMessner]

Benny, what what’s that gold 10mm socket you used on the sump bolts? Looked like one I wanna have in my collection... Any thoughts on doing a episode on handy tools and products you recommend?

[@010aray]

Beautiful new shop space. What's the over-under on that floor being a wreck within 2 months?

[@neilthomas3362]

Ooooooo new shop

[@antonisp6629]

awesome video! And the intro is perfect! A little cosmetic work on the engine would be nice though.

[@ngarewyrd]

Do you make any consideration to flattening/smoothing the stone, or do you think that it's not required for this process? I understand that if you don't flatten the stone, it tends to wear in the centre and end up wearing the sides of the block more then the centre. What methods would you suggest to flatten if it needs doing?

[@dooglemaples1914]

Mad whip

[@r0bkills]

nice toy, you gotta build one of them to the max big boost

[@izzyboss6875]

God damn, new space looks great. That’s not Marty’s new shed is it? Lol

[@warlike2974]

What sort of power can these little engines put out?

[@dielauwen]

AS any woodworker would tell you.You must true up the Stone before you use it.Also use a vegetable oil as petroleum oil dissolves the resin in the Stone, A piece of plate glass with 220 wet dry glued to it is better. Any Biker will tell you to true up cases like that. I always scrape with a sharp wood chisel as I do not like grit in engine. One method to see if the head to block surface is good is to use carbon paper and shelf paper. Tighten the head to the block then remove and look at the paper to see if the carbon transfer is consistent. If not then Machine it.

[@ConstantlyDamaged]

Came and watched this after watching latest Tank Workshop from the British Tank Museum. For a few seconds I thought he was working on an oil pump...

[@LongPeter]

Even fully assembled, it's hard to call that engine a "long motor".

[@dropinbiking92]

Why am I just finding this channel now!?!?!?!?! I wish somebody would have told me Benny's got his own channel