Captain Sim 767 Realisitc Cold and Dark tutorial, including: CDU Preflight and Start procedure. 1/3

Please Subscribe if you have not already and be sure to give the video a Thumbs up as well.
======================================================
Feel Free to Follow us on other social media outlets below:
Facebook = / theplaneguy
Twitch = / theplaneguy787
=======================================================
PC Details:
Falcon White Blue Led PC Case.
GTX 1060 6GB
H310M Motherboard.
I5 9600K
Cooler Master Seidon 240.
8GB 2400MHz RAM
1TB Storage
500W Power supply
300 Wifi
Windows 10.
=============================================================
Song used in the ending part of this video.
Elektronomia - Sky High [NCS Release] (2017) soursed sourced from NoCopyrightSounds. Available at: • Elektronomia - Sky Hig...

[@juanantonio7936]

Hello, I do not speak English, this is thanks to the translator, I wanted to tell you that your video has still been very practical for me, thank you very much, greetings.

[@ThePlaneGuy]

Ok, thank you

[@atav]

One thing I'll add! Boeing recommends settings the bugs to V1, Vr, Vref30+40, and Vref30+80 for your manoeuvre speeds so that you can know roughly the minimum speed to retract your flaps. And Hydraulics on a 75/76 should always be on for pushback. It should be turned on from right to left generally. Right Demand, Center 2, Center 1, Left Demand, Center demand. Hope this helps!

[@ThePlaneGuy]

Suprised it doesn’t say that in the FCTM. But thanks. After research that is what seems to be the situation with the HYD. But the Bugs well its not going to be possible in the CS767, this is why it needs to be adapted.

[@davidmuir6849]

Fantastic tutorial on the 767 It showed me the correct way as I had problems aligning the IRS. Thanks Dave from Scotland and real life pilot

[@ThePlaneGuy]

Nice to hear. Thanks !

[@filmmakerstudios]

The digital qty gauges were inop funny enough. Pilots aren’t that dumb. The mix up was between the load sheet which had the correct amount and the fuel truck operator who didn’t know how to make the conversion. Great tutorial btw Carries over to the cs 757 iii as well!

[@tjpilot5913]

Absolutely brilliant tutorial mate! Thanks a lot Any chance for part 2&3? And do you know if there is a way to uplink winds?

[@ThePlaneGuy]

Sorry for the long reply. I’m still working on parts two and three. in regards to the winds what you do is you need to go to the legs page. find the waypoint where you expect TOC click on the far right key and it should allow you to input wind and temp. you can always watch my twitch channel and get some details from there. - theplaneguy787

[@calumw8409]

Good video. I learned a lot thanks.

[@appr_ils1675]

great tutorial! where are the other two parts? :)

[@ThePlaneGuy]

Well, I have not made them yet.

[@maxy__yy2186]

How to open the captain sim 767 window? Where I can open the doors...?

[@gurumon9298]

Hello!, I have a question. It's nomally can't hear the animation sound of chair movement in CS767?

[@relaxdream8833]

thank you

[@clive6354]

What is the location where the CaptainSim 767 flightplan files saved?

[@joellarsson6866]

C/Documents/Prepar3dv(4 or 5) files

[@FirePuissance69]

How do you get in cold and dark

[@tyrinthomson6102]

I don't have this aircraft, but take a look in the CDU. The option could be there.

[@FirePuissance69]

MineCastGamer123 :D it is not this is why i am asking😂

[@tyrinthomson6102]

@@FirePuissance69 oh, lol

[@tyrinthomson6102]

@@FirePuissance69 I think the best option would be loading in a cessna 172 and shutting down the engines and everything then going to the menu and clicking 'select aircraft'

[@FirePuissance69]

MineCastGamer123 :D ok thks

[@igorigor472]

Hello send me please you preset ezca for 767