New Master Airscrew 4-Blade Props for DJI Avata 2 - Review

[@usadroneflyer]

I recently also changed from the OG to the MAS props... I really like them much better and do feel the responsiveness and sound is much better... But they need to make them in orange! Thanks Steve for sharing!

[@BlairAir]

Lazar at MAS say's Orange is coming!

[@CAPTAINDRONE798]

Yes ORANGE please!

[@mortonbeard2240]

Paint them.

[@KaptenInsano]

Very new to fpv. I felt the dji Avata 2 was a great entry to fpv. Im learning a ton with every vid. Didnt know about the prop setup for all the drones.

[@sumner407]

Any hobby is about experimenting, whether it’s RC or race cars or what ever. It’s just natural to want to improve your tools of the hobby and get the most out of it. That is as much a part as the actual flying part. I for one love to experiment and then test the outcome. I don’t think it is a waste of time, but a big part of the over all experience. We love to spend or money on our hobby too. We are not adults when it comes to our toys, but we pretend to be. Loved the video Cap👍👍

[@dondupuis4007]

Nailed the landing😊

[@eugenelim1712]

Look at the 'semi-circles' on top / below of the 2 tightening bolts. There are 'grooves' on them and they are for the 'orange dots'😊. My friend and I have ordered the red and waiting for them to arrive.

[@MichaelBarber-z8f]

Hi Steve 😀👋 my friend. Very nice👍😁. I really like the red color blades for the Avata 2 DJI drone. Abit more faster and little less noise than the original ones. A fantastic review and excellent comparison. Thank you so very much and God bless you and your family always 🙏. Have a great week my friend Steve 😀

[@CAPTAINDRONE798]

Thanks 👍

[@PRODJIGUY]

Thank so Much for the Dji Avata 2 Propeller Review👍👍

[@CAPTAINDRONE798]

My pleasure

[@WheresBean]

I’ve been using these props for a couple months and I think they’re pretty good definitely better performance and the pitch is not as bad. Not sure about flight time as I’ve never really paid attention to that. Definitely an upgrade.

[@CAPTAINDRONE798]

Thanks for sharing

[@cyberherbalist]

This was informative even for a non-beginner drone pilot like me! I don't plan on flying FPV, but it is interesting to follow this aspect of the hobby. I had a question to ask you about this video, but when it finally came to asking it here in the comments, my own "goldfish memory" kicked in and I couldn't remember what it was! Oh, well, it must not have been important.

[@CAPTAINDRONE798]

My “Goldfish memory” is my Super Power! My wife hates it!

[@float32]

You should try FPV. It’s so nice, especially with head tracking enabled. Being able to look around with your head is so fun.

[@eugenemuodza6110]

Wow that's cool thanks Steve for the nice review

[@CAPTAINDRONE798]

Glad you enjoyed it

[@PaulDavies-y3o]

I’ve just bought these props, not sure whether to change them or not. I’ve only just had the drone yesterday!

[@frankc.9853]

Lol! Too bad you didn't get this out last week! I had a frustrating time trying to figure out the install process! I could barely see the CW and CCW on the props. Then I went on google to find out which motor turns which way and went from there. Very happy that I got it right the first time cause I tested it indoors! I use the reds as a bird deterrent I am guessing it helps.

[@CAPTAINDRONE798]

Great to read it all worked out

[@OFFDRONE_Palawan]

Been looking for this review for... Thank you for this sir ❤❤❤❤

[@CAPTAINDRONE798]

My pleasure 😊

[@RayRay-zc2ed]

I recently purchased the avata 2, drone only. I have been flying it with my goggles and controller 2. The avata 2 definitely feels smoother when flying and is quieter then the avata 1. I do like it a little better than the 1. I haven’t had any issues using the 2 gear. Now I wish dji would come out with an avata 2 that was a little smaller and at the 250 gram mark. Smaller so I could fly it through smaller spaces! That’s what I enjoy is flying the avata through small thight gaps and spaces!

[@CAPTAINDRONE798]

I believe you will see a NEO PRO come out at end January & it may be what you are looking for.

[@RayRay-zc2ed]

@TheHoodieStore no, not the Neo. The Neo is nothing like the avata. You should know what your talking about before you make a comment.

[@RayRay-zc2ed]

@@CAPTAINDRONE798 thanks for the info, I’ll be looking forward for it to come out.

[@RayRay-zc2ed]

@TheHoodieStore then you think you would know better

[@RC.Drone.Pilot.Fun.]

@@RayRay-zc2ed Здравствуйте . Нео летает примерно также с очками и нормальным пультом . Они действительно чем-то похожи . Ведь это синимадроны .

[@lynsmith1096]

Good review and test video Steve

[@CAPTAINDRONE798]

Thanks 👍 Glad you enjoyed it.

[@leetowey8452]

Sorry I didn’t see the blue prop speed test for sport mode?

[@RadRichAntics]

Can you do easy Acro with the older gen controllers where do you need the threes?

[@Jeff-q5t1l]

Love your videos 😊

[@CAPTAINDRONE798]

Thank you!

[@airheadbit1984]

My Orange MAS props arrived!

[@CAPTAINDRONE798]

Orange??? I still don’t have the orange ones. Lucky You!

[@Nunyali5lx]

Had been waiting for these to come out. I had emailed Master Airscrew a couple of months ago saying they had been working on them. Ordered a set via your link. Thanks as always Steve!

[@CAPTAINDRONE798]

Excellent! Enjoy!

[@Nunyali5lx]

Just got them delivered last night. I went to install them and never realized that the screws on one of the original props were super loose. I was probably super close to losing a prop while flying. I had checked them about 6 or 7 flights ago so I was shocked. Ordering this set of props possibly saved my Avata 2 from being lost lol. Looking forward to taking it up to the mountains in Maine this weekend to check out the foliage.and test out these shiny red props :)

[@BlairAir]

BEAT YA, Steve-O! For once, anyway. I got them last Wednesday - Now if it only weren't RAINING every day in North Carolina... Sigh. I think these are great. Love the red, the black - The 2 colors I got. I am not a fan of their Blue, I would love to see a Dark Blue. Orange, while not my favorite, will match the accents on the Avata 2 Thanks Steve!

[@CAPTAINDRONE798]

Orange & White would be my favorite Colors against the grey Avata 2.

[@vatsalkonkani]

I have had same thing. Uav to high or far and forced out of manual to normal mode. But i was flying in rural area away from town. Is it permanent thing or you can go beyond 500 meters ?

[@CAPTAINDRONE798]

In Canada it is based on 120 meters height as that is the current drone recreational max height.

[@Mikephotos]

Hey Steve will Master Air Speed make props for the NEO

[@CAPTAINDRONE798]

My guess is DEFINITELY!

[@guglimugli]

red is 🔥

[@francfortina3473]

I got mine a few days ago. Pretty marginal but the sound is much better.

[@federicoiz0vxl]

Excellent comparative video test, best regards from Rome Italy 🍻

[@CAPTAINDRONE798]

Thank you very much Rome, Italy (I did visit there in the mid 1980s).

[@federicoiz0vxl]

@@CAPTAINDRONE798 💪😉

[@azmir82ismail]

Hi Steve nice testing

[@CAPTAINDRONE798]

Hey, thanks

[@blueflame2532]

Would you ever consider doing a giveaway of the avata 2? I think it would be a great way to engage your community and gain some new subscribers. Also it’s just my dream drone

[@maddmavic]

Can the avata 2 be flown with goggles2 and controller 2 yet ?

[@CAPTAINDRONE798]

Yes. Just requires a firmware update for all devices.

[@PianoNick]

Hi Steve, thanks for the review! Now it’s also waiting for the MAS Neo props to lower the pitch! Of topic: do you still have your guitar KZbin channel online? Can’t find it unfortunately. Thanks!

[@CAPTAINDRONE798]

I have not posted to my guitar channel in a great number of years. Here is a link: kzbin.info/www/bejne/Y6TOfoSuedB1ic0si=lCjljhnF2YDeG5dN

[@PianoNick]

@@CAPTAINDRONE798Thanks! Nice to catch up again with your guitar channel. Do you still play guitar? Maybe a “guitardrone” channel would be an USP (unique selling point), haha. Thanks again and keep up the good work!! 💪

[@FL-PHILLIP]

Great review. I have some older 3in MAS props...wonder if i can use them 🤔. Waiting for me Avata 2 to arrive. Just curious, do you still have your motorcycle?

[@CAPTAINDRONE798]

Older props may or may not work due to mount style and prop guards. Yes I have a Honda VFR motorcycle (there are a few vids on my channel of my riding it and drone filming).

[@sethlawson7476]

Watching, it looks like it slowed itself down as soon as it exceeded 90kph, but it could be flight profile: OEM props gained altitude by about 7-8m. The MAS runs, your altitude runs had gains of 20-30m (~41-68m on Run 1 and 15-45m on Run 2). I've seen seen speeds on a Neo video that were higher due to a dive so I'd imagine the triple climb rate had an impact.

[@awwwtomotive]

Wish they also have for Neo 😅

[@Jeff-q5t1l]

Emailed them yesterday and yes they are working on them , be out soon 😊

[@Anthony-o1o7n]

any affects to flighting time? longer or short or same? thx

[@CAPTAINDRONE798]

That is so difficult to test with any accuracy so I didn’t bother.

[@zemeco]

hi thanks for your video!!!! .... gives you more flight time?

[@CAPTAINDRONE798]

That’s what the marketing says but it is next to impossible to accurately test it.

[@cato2906]

Any idea if they plan on making toroidal props for the avata 2?

[@CAPTAINDRONE798]

Not many companies (major prop companies) embarked on such a design

[@cato2906]

@@CAPTAINDRONE798 Thanks for the quick reply, as you may know toroidal props emit more of a hum instead of the high pitched whine, if they ever do make those I'll be sure to get some for now I'll just stick with the two sets of airscrews I ordered.

[@ColinLeyUK]

Hiya Steve. 👍✈️👍

[@gigazman]

Great review! As always it is a pleasure to watch your videos!

[@CAPTAINDRONE798]

Much appreciated!

[@X862go]

they need to make them in orange!

[@dmusp1]

Thanks, ordered through your link

[@CAPTAINDRONE798]

Great! Hope you enjoy them.

[@fdhmcking]

6:25 what is that yellow glow on the Football field - seen it a lot in drone videos 👀

[@CAPTAINDRONE798]

Many new DRONE owners as that question. This is the answer: en.wikipedia.org/wiki/Heiligenschein?wprov=sfti1

[@fdhmcking]

@@CAPTAINDRONE798 thanks👍

[@SangheiliSpecOp]

@@CAPTAINDRONE798 I always wondered about this. I observed it with my Mavic Air 2 a few years ago and found it to be a bit puzzling. Its interesting that its a phenomenon that you would only see up in the air

[@Webprof68]

Hi Steve, Thanks for that test. Sorry for my bad English. I have a question.... Ist the Flighttime the same with booth Props ? I like you Channel. Greetings from Frankfurt

[@CAPTAINDRONE798]

Hello, the company says the Flightline is longer with the master Airscrew props, but I could not test that because the difference is small.

[@lemonteasensei5041]

Hey there, thanks for the informational vid! I wanted to ask, from your experience, do these props help drone stabilization on windy days? More specifically if you were just hovering in the air? Thanks!

[@CAPTAINDRONE798]

Nope, should be no difference in that category

[@airheadbit1984]

I just noticed that you said the Avata 2 kicked you out of manual mode, at 116m is 380 feet, what happened to 400 feet?

[@CAPTAINDRONE798]

Oh, in Manual mode it does not wait until you reach 400 feet… if you are heading in that direction at speed it then kicks you out before.

[@Simon1011-]

Will it make louder noise with 4 blades instead of 3

[@CAPTAINDRONE798]

The rule of thumb is… The more blades, the quieter because the props are spinning less fast to accomplish the same thing.

[@Simon1011-]

@@CAPTAINDRONE798 k

[@ADDISON396]

​@@CAPTAINDRONE798where on earth did you get this info?? The avata 2 is way quieter than the 1 purely due to less blades. The same rule applies to every single photography drone vs an fpv drone. Dude, do you just abandon reality (it's a way higher pitch) and make stuff up (like this "rule of thumb") when you get sent free stuff?

[@CAPTAINDRONE798]

@@ADDISON396 Oh God, another moron, with multiple KZbin accounts, makes themselves know to the world.

[@ADDISON396]

And so my point stands, where did you get this info which is contrary to how every other drone works, contrary to physics and contrary to common sense? Talk about projection jeeze.

[@Jeff-q5t1l]

I noticed that you’re flying with no goggles with just the remote. I googled that today and it says I cannot just use the remote controller. Must use goggles . Can’t wait to try that tomorrow lol

[@CAPTAINDRONE798]

When you seem fly with no goggles IT just means they are ON but not ON my head

[@Jeff-q5t1l]

So turn them on and set aside then with antennas up .

[@Platypus-Dreams]

Will they make props for the NEO

[@CAPTAINDRONE798]

My guess is YES

[@Jeff-q5t1l]

I emailed them yesterday about Neo props and they are working on them now.

[@oytpFPV]

Can you pls make some more tests for propwash and max speed in Manual mode?

[@CAPTAINDRONE798]

All FPV Drones tend to show propwash based on the manoeuvres performed. In the FPV Hobby, the easiest fix to propwash is to change props or use a lighter or heavier battery.

[@oytpFPV]

@@CAPTAINDRONE798 yep, this is true. But comparing to stock props, did you feel more of propwash or less?

[@CAPTAINDRONE798]

@@oytpFPV It would depend on how the drone is moved. In some cases there would be less, but in others the same. This is an AVATA 2 and it is not designed for Freestyle due to its weight and tuning & lack of motor power so propwash will always exist.

[@1917VIL]

Seems like there's not enough advantages to warrant buying these on performance alone. But they are a cool option for colors, and that plus some minor performance increase may make sense for some folks

[@RC.Drone.Pilot.Fun.]

Здравствуйте . Я поменял на Нео стандартные на пять лопастей . Результат не особо впечатлил . Интересует ваше мнение . Стоит менять на Авате или так вполне хорошо ?

[@CAPTAINDRONE798]

The Avata 2 drone is Big and Heavy compared to the Neo and performs much better

[@dondupuis4007]

Steve awesome video, does the avatar 2 work with controller 2 and goggles 2? I use master screw on most of my DJIProduct, and I have 5 of their aircraft, more for the colors. shifting to whoops these days as I move into FPV. Masterscrews should be thanking you for your excellent reviews, your why I have so many. Of course, I like your honesty, if you find a product you question you share that and state whether if you think its worth the money. So in short I love master air screw props. Once again, thank you a great video, thank you! You state you review is not scientific, close enough for me, better than most could do. 😊

[@CAPTAINDRONE798]

To answer your question, YES the Avata 2 works with controller 2 and Goggles 2 (all devices require a firmware update). Also, thanks for the support.

[@Controlpeace]

Sir, should I consider buying this instead of any other options or this is the only option. Thanks.

[@Ash-vi9mt]

Does anyone knows if Avata 2 after firmware upgrade works with Googles 2 only with 2nd generation controllers or there is a chanse to use 3rd generation controllers?

[@CAPTAINDRONE798]

Go to the DJI STORE website. Find the NEO, go to specifications, scroll to the bottom and see what the compatibility list says. Do the same for the GOGGLES 2.

[@droneflyernick]

I emailed MAS if they will be releasing the orange colour props (as seen on the website) that match the front accents of the camera, there response was, yes in few weeks time. I will wait until then.

[@CAPTAINDRONE798]

The orange would certainly look nice!

[@Manny7RM]

Good review, Im pretty sure someone is crying about something. Can't please everyone😂.

[@CAPTAINDRONE798]

Ha ha, that is usually the case

[@henrytaaffe7058]

awsome footage as always Captain

[@CAPTAINDRONE798]

Thanks again!

[@juki6377]

was this drone successful? i had totally forgotten it existed

[@CAPTAINDRONE798]

Any drone sold by DJI is considered successful as there is no shortage of people buying DJI Drones.

[@juki6377]

@@CAPTAINDRONE798 thank you for replying, I mustn't be their target as I haven't seen ads or videos about it at all recently, while I've been swamped by one's for the neo. Nice review and I'll practice doing loops slowly from now on 👍

[@jasonthompson6809]

That's 2 in a row with no tractor man! Must be because school or something! 😂 Thanks again Steve keep the videos coming!

[@CAPTAINDRONE798]

Tractor man is apparently on a weeks vacation

[@willrine8614]

Fun video ! 😃 Interesting results and fun flights. Thanks Cap !

[@CAPTAINDRONE798]

Glad you enjoyed it

[@SkyDomeVIZE]

Nice. Are you going to do a comparison on the DJI FPV vs Avata 2 flight characteristics an image ?

[@wellingtonmeloniosilva2232]

Faz teste de 4 pas no Dji Neo.

[@ulysseshd]

I urge you to watch dronearchy’s videos of the DJI Avata 2 and tell me that this is a calm drone

[@CAPTAINDRONE798]

Compared to an FPV Drone designed for freestyle or race, this is your Grandma’s easy flying reliable drone (like driving a mini-van)

[@SpeedsterIG]

Notice for the viewers from the EU: the Avatas C1 certification is only valid using the original DJI propellers.

[@CAPTAINDRONE798]

You have crazy strict regs. What do the regs say about FPV Drones? No FPV pilot uses the original props for long.

[@SpeedsterIG]

@@CAPTAINDRONE798 The C1 certifications says the drone is safe to be flown around and above uninvolved people, it is considered safe to fly this way. If you change the props to ones that have not been certified the drone cannot be considered safe anymore. It's like you change the tires of your car to some shady aftermarket ones. that have not been tested to be safe under any circumstances. If a tire pops and you or pedestrians are harmed someone gets a big problem with mounting those tires. If you use your drone somewhere far away from any other being no one will ask any questions in case something went wrong. But the C certifications consider the dangers a drone poses on people and infrastructure. You may like it or not. At least these drone classes let us fly near to other people legally.

[@BlairAir]

Oh - at 81 dB the Avata isn't particularly loud. MAS Claims a 2 dB reduction in noise level, and THAT SOUNDS RIGHT TO ME

[@camilo8cheryl]

Prop test starts here 2:57 and 13:07 Dji prop still has lower tone..you are all welcome for the money savings👍

[@CAPTAINDRONE798]

Now if only you could get the world to read your comment 😆

[@camilo8cheryl]

@@CAPTAINDRONE798 been following your great channel i just gave a very simple time stamp for us who wants to listen and compare in a simple time stamp the noise level..

[@ADDISON396]

​​@@camilo8cherylit's almost like he's annoyed his viewers with little time will still get the info he is apparently keen for them to have, even if it means less retention. Motives being unmasked much. This comment section alone has made me no longer want to support this channel. 'Do not reccomend'

[@camilo8cheryl]

@@ADDISON396 same here👍..he could have thanked us for doing the comparison in a simple tap..which help all of us to decide..but he did get annoyed of what i did to help his viewers🤦🏻‍♂️

[@ADDISON396]

@@camilo8cheryl he seems pretty petty and childish in his other comments too. Seems like a bit of a man child. Yikes 😅

[@willay747]

Thanks Captain, great video! I do like the look of the red!

[@CAPTAINDRONE798]

You and me both! Thanks for watching.

[@Flowboat]

I thought fewer blades on a prop=longer battery life?

[@CAPTAINDRONE798]

Normally the Flight Control dictates the speed of the spinning motor. So if the flight controller detects no further lift power is required, it reduces impulses to the motors. Therefore, on a drone, helicopter and plane, a 4 blade can spin slower and provide the same thrust, so in essence on a drone, flight time is increased.

[@sante1996]

they are higher pitch

[@dynoman7]

Can you post your rates for manual mode, please and thank you 🎉?

[@CAPTAINDRONE798]

I leave everything on default (just as it was when it came out of the box).

[@prashantparthsarathee3041]

This drone os soo good...if only i could afford one😢😅😅😅😢😂

[@toddweltiable]

All other things equal, I thought 4 props should be LESS efficient than 3. I guess the shape of the prop and pitch etc, will affect this.

[@CAPTAINDRONE798]

Normally the more blades the more efficient. This is because the flight control on a drone just expects a result when you move the joysticks, so when the result is achieved it tells the motors to cease increased output (this all happens in nano seconds over and over).

[@clackersclarke4450]

Did I just spot a cricket pitch at 14.30?

[@CAPTAINDRONE798]

You may have

[@X862go]

Wow no orange props

[@MattDvc]

Why your avata 2 is so slow? Regardless of the props. Mine does 100kph+. Are you flying at high altitude? By the way quieter doesn't mean more pleasant. But no one ever mentions it.

[@CAPTAINDRONE798]

You do 100 KPH because you dive down to the ground. Trying flying straight at a level height.

[@MattDvc]

@@CAPTAINDRONE798 had to check my old test video. was doing just below 100 kph whilst climbing at 30 kph. maybe ham file + manual mode? no significant wind by the way.

[@CAPTAINDRONE798]

@@MattDvcbased on DJI SPECS, the AVATA 2 can reach just over 96 Km/h in manual mode with no wind. However, as many of us reviewers on KZbin have realized when we test DJI Drones, we never reach the advertised max speed. In order for a claimed speed to be valid it means every human in the world could obtain it on each try when there is no wind. I tried 4 times in this video and tried many other times in other vids. The only way to get over 100 km/h is to dive the drone which is exactly what most people tend to do on KZbin.

[@BillMaryon]

agree, seems slower than mine. I know that there is a power difference between FCC and CE mode - I wonder if a lot of people are being caught out by that.

[@SickocrowAU]

It doesn't need props. It needs a tighter tune in manual mode. It's so sloppy in any wind or adverse conditions.

[@thekiteboatparty3568]

i’ve gone over 100kph with standard props… i’m sure it could go faster with standard props but i think its gps speed limited

[@CAPTAINDRONE798]

If you dive from sky to ground then you can increase speed but that is not realistic of the capabilities in a back to back test. In this video the speed test was conducted 4 times in manual mode and all results are close which means it is accurate. Everytime someone tests the speed of a drone, airplane or helicopter there will always be someone who says they went even faster. Watch KZbin vids of speed tests on RC planes… they all dive down to the ground which is not how to correctly do a speed test. If I drop my car off a cliff it would probably exceed the speed I’d get in a short distance on a road.

[@thekiteboatparty3568]

i agree, i guess my point was that i see much more effect on top speed from wind than from a dive, probably due to the drones terminal velocity. So if there is any wind at all i feel these tests are invalid because wind regularly changes direction and gusts. Regards the dBA measurement why not set a precise distance from the drone to the meter? I love the colourful master airscrew props and i loved your explaination of how to fit them so than you for that. I have fond memories of the plane i built as a child with its finger munching master airscrew props. But i also love and respect DJI products so i just like comparisons to be fair and as precise as possible. Anyway thanks for your video.

[@thekiteboatparty3568]

and finally i would hazard a guess that a typical RC plane has usually got a far higher unassisted terminal velocity than a small drone

[@thekiteboatparty3568]

and come on mate you are selling these props

[@billmcdonald4335]

US$14 for one set? Try some Gemfan 2925 5s. One set for CDN$5, and they're proper cinewhoop props. Quieter than tri-blades, too.

[@CAPTAINDRONE798]

I'm not sure the screw holes would fit... have you tried them?

[@billmcdonald4335]

@@CAPTAINDRONE798 The 2825s are for the Avata and the Avata2. I haven't personally tried them, but there are videos. I've used Gemfam 5-bladed props on several of my BetaFlight-based whoops over a few years. They are very grippy, and they're really quiet. My daily driver wouldn't be as good without 'em.

[@LordSephir]

I find it quite surprising that DJI, a company known for its cutting-edge engineers, has intentionally chosen propellers that generate more noise...🤔, reduce the Avata 2’s flight time...🤔, and limit its speed...🤔. Honestly, I’m quite skeptical about these unofficial propellers. First, I really don’t like the noise they produce. Second, the fact that they have 4 blades instead of 3 seems to add unnecessary weight to the device. Third, the material used doesn’t visually inspire confidence. ⚠ The sound of the unofficial propellers does indeed have a higher pitch (+2 tones) compared to the original ones, which DJI specifically wanted to avoid for this second Avata. That said, the color is quite nice… I think I wont take risk and stick with the official propellers, which were specifically studied and designed for the Avata 2.

[@Ozkar2023]

The mosquito sound of the Neo is annoying

[@vernelfpv]

seems the same sound

[@indiana146]

Hi steve im doing my best on facebook to stop people buying a £39 said to b equal to dji.says can fly 1km high 3280ft and 15km distance 9 .3 miles As i dont yet own a drone im still doing my best to stop gullible people being conned Oh great 39 quid for a dji clone till you try and fly it but it flies like parrot on crack Doin my best steve

[@CAPTAINDRONE798]

Facebook is massively full of scams. Do you know why they exist? Because a crazy number of people fall for them and Facebook makes no attempt to remove them. Thanks for educating people.

[@londenard]

So... I've been reading the Bible, Book of Revelations to make sure there nothing in there about Steve saying positive things about DJI being a sign of an upcoming Apocalypse... I mean, I've already purchased ice skates for when I get sent to Hell!😂

[@leemingdesign9577]

Waste of money. You think DJI aren't experts in propeller design and don't already include the best optimised blades for their products?

[@CAPTAINDRONE798]

In the video I brought up the point that only people who buy DJI Drones are confused as to why a pilot changes props. If you were an FPV pilot flying all different types of FPV drones you would change the props and batteries to different kinds on a daily basis.

[@UkzFlipside]

@leemingdesign9577 master air screw are a good company I've always upgraded to there props

[@djwak59]

Right ? I’m not an FPV pilot , so I can’t say much about the difference in flight characteristics of the MAS props. But I DO agree about DJI engineers already putting the best props on any of their drones. I own 4 of them and just bought the Avata 2. What I REALLY would like to see is DJI put out their own colored props. Thanks for posting Steve, always informative AND entertaining videos !

[@Nunyali5lx]

There is some truth to what you say but this is a hobby for me. I enjoy tinkering and this hobby very much. I absolutely love this drone and I am happy to shell out 20$ with shipping to see if I get a different experience from it. It's not a waste of money for those willing to spend it to try something new in a hobby they enjoy. Do I need them? No, but do I want them yes ! :D I have some nice footage I took this weekend of me flying the Avata 2 along the Massachusetts coast line on my channel.

[@RickLaBanca]

Dji hasn’t been making props as long as master aircrew. Different props for different scenarios.

[@emilianohangiu9957]

4 blade don't make sense

[@CAPTAINDRONE798]

In the FPV hobby there are 2 blades for racing, then 3 blades for cornering, 4 blades for efficiency and 5 and 6 blades for long range.

[@Mikeylikesit1968]

You don't make sense

[@36thstreethero]

@@emilianohangiu9957 make sense for what?

[@alexanderenrique6462]

Conclusion: stick with the props that was designed and came with the Avata 2.

[@Photo_temmy]

Sir can you do a giveaway?? For me??

[@HelvisCamaro]

I like how in all your avata 2 reviews you never mentioned that the drone itself can quick charge up to 30 watts max, the 3 battery charger is max 60 watts fast charging, while the controller and headset are only 10 watts. You also failed to mention that the horizon steady eis only appears as an option if your video is set to 4k60fps and lower. The horizon steady stabilizer option is not available in 4k100fps! And you call yourself Captain Drone! You also failed to elaborate on what sd cards dji recommend for this specific drone. Those are just a few details you failed to provide your audience! Normal guy here wanting all the details, watching all these videos i can of yt reviewers like yourself that make a living at this yet you can't even provide all necessary information when reviewing products that you specialize in is unacceptable!

[@CAPTAINDRONE798]

This was not an AVATA review. Have you been sneaking into your parent’s liquor cabinet???

[@droneshakk]

If you need a recommendation on memory cards find another hobby

[@HelvisCamaro]

@@CAPTAINDRONE798 i know it's difficult, but the comment is in reference to all your avata 2 content. Many of you content creators bok at this or that with the avata not having this much power or the other. Well, i encourage you to check out Dronarchy who flies the avata like none of you mediocre drone reviewers! Dronarchy is the bonafide pro!

[@HelvisCamaro]

@@CAPTAINDRONE798 oh yeah

[@Photo_temmy]

Why do u only like my comments and not reply

[@CAPTAINDRONE798]

I get thousands of comments per day. I can’t respond to everyone.

[@Photo_temmy]

@@CAPTAINDRONE798 I understand sir. Thanks; for replying this time

[@CidAerialMediaServices]

I'm going to be extremely blunt. These are dogs**t props. Just had one brake. Drone ascended to over 2800 ft. I had no control. Return to home wouldn't work. Drone would not descend. Eventually the battery died and the Avata 2 fell from the sky. DO NOT PURCHASE these props.

[@mattg2596]

Love the positioning advantage of DJI vs IFLIGHT ETC. , wish hobbyist quadcopters would start ballin up more on sensors etc to make indoor flying easier, also wish DJI would Ball up and go hard on Speed and have some speed models that go over 120mph. No f'n aroundddddd. But oh well.

[@hiluxmonstertruckgleno6276]

Hey guys Did you know that avata 1 props fit avata 2 !! The master screw props I'm using The avata 1 props 4 blade are straight design The avata 2 are curved design props !!