Perhaps the best explanation of rates that I’ve ever heard . Thanks!
@NJ-Tech3 ай бұрын
Appreciate the comment 🙏🏼
@samavella88314 ай бұрын
Excellent tutorial. You should be a teacher, if you’re not one already!
@NJ-Tech4 ай бұрын
Thanks very much, really appreciate the kind words and glad it helped 🙏🏼
@Blueskyver2 ай бұрын
Excellent explanation of the Rates! It's one of the best I've watched. I will fly the Avata 2 in Manual/Acro mode soon, and your recommendations greatly help me. Thank you. I'm subbing. Greetings from Montreal, Canada.
@NJ-Tech2 ай бұрын
Thanks so much for the kind words! Good luck and take your time, it's great fun in manual 😀
@BIGJON82719 күн бұрын
Thanks for the informative video. I agree with others as it is the best I've ever heard.
@NJ-Tech19 күн бұрын
@BIGJON827 glad it helped! Thanks for the kind words 🙏🏾
@sotirisrezitis4 ай бұрын
Very helpful once again!
@NJ-Tech4 ай бұрын
Thank so much 🙌
@canaldoinglesАй бұрын
Best explanation ever for that matter! Thank you
@NJ-TechАй бұрын
@canaldoingles thanks for the comment, glad it helped!
@Mauronic1002 ай бұрын
Great vid. I wish DJI would show graphs while you change it. This is much more intuitive.
@NickHarbornePhotography3 ай бұрын
That's really helped me as a new fpv owner i want to get into full manual as soon as i can and this helps me understand what everything does. Im not a fan of the toy controller only ever used RC controllers to fly my drones so it feels normal to me. Off to practice practice practice
@NJ-Tech3 ай бұрын
Glad it helped and thanks for the comment! Take your time and you'll have loads more fun in manual 😎
@NickHarbornePhotography3 ай бұрын
@NJ-Tech will be starting slow with the idiot switch on for a while stopping it from doing acro until im confident sending it around etc then take it off and see where we go when im used to her lol. Care refresh in place 😅😉
@dannomight19802 ай бұрын
I been venturing over to Manual mode but afraid to turn the attitude off because I didn't understand the settings and there's a big difference between flying for real vs a sim like liftoff or Uncrashed. Now I can plug in some parameters, practice, and pop of the training wheels er... props I guess 😆 Thank you for the excellent and easy to understand explanation! I needed this more than you know lol.
@NJ-Tech2 ай бұрын
Take your time, there's no rush! If you're cutting around in manual mode on the sim you're going to be fine. Just start off with no more that 10 degrees tilt on the camera to keep things slow and remember the pause button is your friend if you get in trouble 😉
@dannomight19802 ай бұрын
@@NJ-Tech Oh I've made good use of the pause button in my manual mode moments thus far 😬 Thanks again for the help. Much appreciated
@TakeOffTime3 ай бұрын
NJ.. I was needing some guidance on manual mode and rate and expo settings, thanks for this video!
@NJ-Tech3 ай бұрын
Welcome, thanks for the comment 🙏🏼
@CrispyJacketStudios2 ай бұрын
Amazingly good explanation!! Thanks. Just entering fpv and tried full manual for first time today watching this vid in a field first 👊 Great fun if a little scary at first 😂 it only occurred to me after the second ‘landing’ that I can easily switch back to S or N of things get a little sketchy..! Which they did 😱
@NJ-Tech2 ай бұрын
Thanks man! Yeah I use the pause button a lot as my reflex when things look sketchy 😆 glad you're having fun!
@MrFruitycakes4 ай бұрын
the master educator!!!
@NJ-Tech4 ай бұрын
the master waffler more like 😂cheers matey.
@MrFruitycakes4 ай бұрын
@@NJ-Tech the best explanation of expo i've heard!
@DerZaubererFN3 ай бұрын
Perfect explanation! Thank you :)
@NJ-Tech3 ай бұрын
Thanks for the comment 🙏🏼
@Buggabones3 ай бұрын
Thank you! I was disappointed in manual mode because I had M Mode Attitude Limit on and it wouldnt let me do much!
@NJ-Tech3 ай бұрын
It caught a few people out don't worry! Take you're time with it as you can definitely crash now 😂
@durian_united3 ай бұрын
thank you so much for sharing, this really help for beginner like me
@NJ-Tech3 ай бұрын
You're very welcome! Take you're time and enjoy, she's a great little machine!
@JuacalvoАй бұрын
amazing, can you do more vids like this one? for beginners of avata 2 in Manual... thanks!!
@NJ-TechАй бұрын
@@Juacalvo more avata 2 content will be coming for sure ☺️
@cyprustoxic80368 күн бұрын
Nice video my friend but you have a rates for avata 1? Or is the same with avata 2?
@outcastfpv4 ай бұрын
Great Video, I never see any DJI store voucher codes around unfortunately
@NJ-Tech3 ай бұрын
yeah, sadly these thing harly ever go on sale or come down in price..
@betaompay38Күн бұрын
Does the expo value of 0.6 mean 0.60 ?
@gimbalair2 ай бұрын
Would welcome your inout on what rate range would suit indoor drone tours, have my cinelog 30 dialled in but the avata2 has no throttle expo and even with a 5 camera angle its still lively flying through a house. I need gentle curves when turning which is a roll and yaw combo. i keep experimenting but i’ve not found a sweet spot yet, its just too fast at times.
@NJ-Tech2 ай бұрын
Why wouldn't you choose to fly in normal mode for house tours? Slef levelling and throttle response are all much easier to handle indoors in normal mode. Most of the people doing house tours professionally use normal mode for this. If you do want to fly manual then 0 degrees on the camera (remember the vertical FOV of the camera is enough even at 0) and increase your exponential curves to a high level to make inputs easier in tight spaces.
@gimbalair2 ай бұрын
@@NJ-Tech because compared to the floatiness of a decent whoop it looks boring and does not turn buttery smooth. Also 0 camera angle limits my ability to fly backwards out of set of doors to do a reveal as I fly away and up.
@mcmediaandfilm4 ай бұрын
Great video . One question is andy on your settings 😅
@NJ-Tech4 ай бұрын
Thanks! So Andy is on stock settings at the minute but im bullying him into changing his rates now 😂
@mcmediaandfilm4 ай бұрын
@NJ-Tech ha ha ha now that would be a viral video
@alexbucklandphoto3 ай бұрын
Fantastic video, is there any chance you could do a video comparing these rates to actual rates in a simulator like Liftoff or Velocidrone.i am loving these rates and would like to replicate them in these sims.many thanks
@NJ-Tech3 ай бұрын
Thanks for the comment! So i havent flown the sim in years, and although they are a great place to try out new manoeuvres and work on muscle memory, they often don't reflect the real world. What i mean by that is the physics of the sim is usually just too perfect without really reflecting wind, weight, floatyness etc. Although they are getting better they still dont really tranlate to the real thing that well. What i suggest you do is tune your rates as i described and get the quad doing what you want first. If you are a little worried just practise your manoeuvres nice and high up so you have lots of time to recover if you mess things up. Then as you get a feel for things you will know how to tune the sime rates. They almost never directly translate from real world to sim anyway. Ive tried it and often to feel like my quad, the number are vastly different. You will know if it feels wrong in the sim, just use the steps in this video to tune the sim to feel like your real quad. Hope that helps!
@alexbucklandphoto3 ай бұрын
Thanks Neil, I am mostly flying in the Sim to get some stick time in,especially when the weather is bad or in the evenings. Unfortunately I live in area surrounded by airports so have to travel further afield. Main reason I'm asking is because DJI screen and Betaflight look different so wondering if there was an easy translation. Really struggling to find my rates in the sim,which I can then translate to my non DJI drones.
@Hunter_FPV4 күн бұрын
What is your favorite camera angle?
@NJ-Tech4 күн бұрын
@Hunter_FPV actually about 35 degrees with a nice wide sensor like on the Avatar 2 is perfect for all speeds.
@Hunter_FPV4 күн бұрын
@@NJ-Tech thank you
@NewHeightsAerials3 ай бұрын
Awesome! thanks!
@NJ-Tech3 ай бұрын
🙏🏼
@edgarseit8374Ай бұрын
Hello i have avata 2 how to enable acro mode coz no acro mode on may goggle screen?
@NJ-TechАй бұрын
@edgarseit8374 do you have the remote 3? Without it you can't fly in acro mode. Also you have to go into settings to enable 2 check boxes to confirm full macro mode and disable angle limit
@brandon96894 ай бұрын
I'm curious to see how this thing handles a trippy spin? Its pretty light on yaw i believe, but then again I'm not always consistent with doing them in a sim.
@NJ-Tech3 ай бұрын
Any quad like this with propgaurds or ducts generally don't do yaw manoeuvres very well, and best avoided. I have done a few inverted yaws but they never exit well and can drop an arm. For a consumer drone, its very good though!
@G_ShiftАй бұрын
Is this also called PID adjustment?
@NJ-TechАй бұрын
@specialagentzeus hi there. No, PID adjustment is an adjustment of the gains of the controller: The Proportional, integral and Derivative gains. This is something on all custom built quads we are used to tuning and really helps dial in the Quads flught characteristics but sadly DJI don't give us any control over this.
@Mauronic1002 ай бұрын
Are there settings for throttle anywhere? I’d like to add some deadband.
@NJ-Tech2 ай бұрын
Unfortunately no throttle options
@Mauronic1002 ай бұрын
@@NJ-Tech bummer
@belovedLion804 ай бұрын
Try these rates on my next flight.
@extremexrdeutschland87043 ай бұрын
good morning my friend! So one question is how to increase his acceleration, I thought he was very slow!
@NJ-Tech3 ай бұрын
Are you in Europe?
@extremexrdeutschland87043 ай бұрын
@@NJ-Tech Yes
@NJ-Tech3 ай бұрын
@extremexrdeutschland8704 unfortunately in Europe (CE mode) the avata 2 has been speed restricted. There is a way to turn the restriction off by using the HAM hack. If you do some research you'll see its very easy to do by just placing a file on the goggle SD card.
@briansaner1014 ай бұрын
Do you use rocksteady or gyroflow for your freestyle edits?
@NJ-Tech4 ай бұрын
just the built in Rocksteady!
@briansaner1014 ай бұрын
@NJ-Tech For some reason I had this weird twitch in the video with rocksteady before doing any rolls and flips. But was maybe my rates and my stick movements, I'm gonna try these rates out and see how I do. I love the avata 2 but really love doing freestyle flying also. I probably should of gotten a 5in fpv but glad to know that you can still freestyle the avata 2 but takes practice and getting to know the drone first
@NJ-Tech4 ай бұрын
@briansaner101 exactly as you say, it really is a great flow quad, just take your time getting to know it and tune your rates. I definitely love the flight times compared to a 5 inch quad too! Thanks for the comments 🙏🏼
@novax71763 ай бұрын
🔥👌🏻
@NJ-Tech3 ай бұрын
🙏🏼
@dome59833 ай бұрын
If I use same this rate in avatar 1 . will give same your flying
@NJ-Tech3 ай бұрын
I have never flown the avata 1 so I'm not sure. Best to understand how it all works as I explain in the video so you can tune it for your flying style 🙂