On the job - Replacing Lost Car Key - Decoded, Cut, & Programmed

Ever wonder how a locksmith replaces a lost car key? Watch as I decode, cut and program a car key from scratch for a Mercury Mariner.
-------------------------------------- Buy Tools --------------------------------------
FO38 Lishi Tool: www.uhs-hardware.com/products...
xHorse Mini Condor Plus: www.uhs-hardware.com/products...
IM608 Key Programmer: amzn.to/3c3g28H
-------------------------------------- Chapters --------------------------------------
00:00​ Introduction
00:43 Pick and decode lock
03:04 Cut car key
06:02 Program transponder chip
Want to become a locksmith? Visit here:
/ captainlock...​

[@urgencylockout]

Rest peacfully brother. I'm sure you're cutting keys in heaven.

[@jewishcrackerful]

😔 what happened

[@VanyaVasylenko]

@@urgencylockout what happens?

[@CurtisWilliamsDomain]

Are honest to show the full process and although mistakes are made you had very great customer service skills and built my trust even more as one of your followers and subscribers

[@johnnysprocketz]

Of course mistakes are made bro do u not make mistakes 😂 or are you living in youtube dream world

[@peterzenner2020]

I dig the magnetic "Auto Note Pad". That alone made the video worthwhile!

[@jlaw8232]

You saved me last winter - great to find your channel!!

[@josecfish5297]

This is a easy job who you got all the right tools and know how to use them👍

[@johncharles236]

Good stuff man, keep them coming. As someone who is just getting into the business, your videos encourage me to keep learning.

[@CaptainLockPick]

Thank you John. I appreciate the support and I’m glad my videos are encouraging you!

[@talhamajam4399]

Hi, this is a great video. Keep them coming, your videos inspire us to learn more 👌🏻

[@oscarpalacios7198]

Thank you very much for your GREAT videos 📸

[@Vikingdescendent]

Great job and vid. My key feel apart while trying to open my door and the transponder fell out and is lost. Great setup and van. Hopefully there is a service like yours where I live...

[@dashtyATG]

Like the way you do it. Well done.

[@wendygarcia1995]

You are awesome and honest man

[@barryjewell4511]

good job on your video. you might want to unplug cords by holding the plug and not the cord to prevent cord failure, works for all cords

[@SlavkosHobbyChannel]

Nice job!

[@thejack9232]

Cool, good video.

[@Blueagavelawncare]

Nice video! can we get the VAN s tour et up? I have a ford transit that im planning to go mobile in the future.

[@abcreads1505]

Awesome video. What is the key programmer you’re using and what was the app called with the remote programming procedure?

[@awesomegirls8289]

you are a good man

[@CurtisWilliamsDomain]

You are very good my friend. So how do you determine which transponder to use and the exact key?

[@seenitalready]

4:46 - Thats so cute/cool - Dog chillin all day

[@sollykhan2385]

Excellent video, Thank you for all the time and effort you put into these videos, well appreciated, were a small Shop here in the U.K and do mostly German vehicles, VW Audi, Bmw ,And Mercedes, what would you recommend as a starter kit to get into locksmithing work, your Van looks well equipped btw 🙂

[@robertgarcia1216]

Hey man. I recently discovered your channel. I'm looking into getting into the mobile auto locksmith business as a side job. Which key programmer and key cutter do you recommend for a guy starting out?

[@mikes7471]

Good job ... You do make it look so easy .. Like your dog too ... What kind of dog is it ??? Keep the videos coming it helps me learn so much more ....

[@inmyexpression19]

Hello I have a question. I'm learning to locksmith by being self taught. I wanted to know for what situations might I have to use a key coding software to get a key code for bitting? I can't just decode the lock with a lishi and get the code?

[@jasoncoxon3375]

Great video. How did you get into been a locksmith?

[@aviongreen5288]

Does your cutter & programmer work for all cars?

[@dejanradivojevic8660]

Hi, do you know what lishi tool works on 2020 kawasaki zx6r?

[@JuhaszMagic]

What is that website where you can see the key programming tutorial? Thank you for your answer

[@joeydelmarsjr.646]

have you used the autel km100 to do fobs or the xhorse? and dont the lock and unlock buttons work when you program a fob?

[@user-Alhassany]

Great video man Is there a real way to find out if lishi is original- I bought a bunch of lishis from locksmith keyless and they seem all fake - they do have the scratch label on back but they don’t say lishi in bold like on yours

[@hafidautorepair2793]

Hello I wanna asked you what website to get the key cut code by Vin number . And thanks for your help

[@andyepperson5982]

On other key fobs says to have door open and press unlock then the 8 key swips is it the same with that fob ? Just asking?

[@MW-jm8qb]

So, you decode vs. cut from vin/code ? Cheaper that way ?

[@antron1218]

Hello brother, was wantto get in the business of locksmith. I am a Dallas Firefighter and was wanting to learn the trade. Can you help? Thank you in advance.

[@Sgt-Locksmith]

Why didn't you just program another key and take the remote back with you and remove the roll pin and put a new blade in? I've been programing the remotes before I cut the remote headed key that way I don't have an inventory lose on the job.

[@CaptainLockPick]

Now that you say that, I am kicking myself in the butt. Idk why I didn't think of this at the time haha.

[@michaeldillon3784]

It happens

[@sangchun5589]

I lost 2009 Cadillac STS key. If I get key cord from dealer can you fix it? door is locked .

[@artisholland618]

I have a 1994 Jeep Grand Cherokee Laredo and I lost the only key I had through a robbery. How can I get a new key that will also start my truck?

[@Mark10787]

How do you power supply xhorse condor mini?

[@7ZurdoOfficial]

How much did you pay for key cutting machine and tablet programmer ?

[@CNM2020]

How much did you charge for that service

[@OscarHernandez-rj1dl]

Is this chip and does it require two keys cuz ford makes these?

[@aubreyspivey5155]

What was your take home on that job

[@alhdafe]

حظا موفقا

[@GSK-mc7rw]

Can’t believe you used the wrong remote 😂

[@OscarHernandez-rj1dl]

What do you do if it requires two keys but you tell your customer that your program it and then when you get there you find out it's two keys. They need to be programmed. Is there possible way to program with one?

[@liquidsteel]

I'm looking to start my business also . How is the cost of insurance in order to have access to Dealer/Manufacturer PIN codes ??

[@cjking13]

What kind of key cutter is this ?

[@dailonroberson3599]

How did you get business when first starting?

[@alloys-barakaitangaja2531]

I like to learn that education more. How will you help me?

[@RaulRodriguez-fj4mo]

Excellent video, Thank you love your helper how can i can get in touch with you have some question tks

[@don1designceo]

I got a daihatsu terrios 2007. My key can start the engine but won't open the door so i am unable to lock the car. What can I do to get a key for it?

[@octaviolozano6890]

IS THAT FLIP KEY FROM AUTEL OR SOME GENERIC BRAND? I'VE PURCHASED THE KM100 BUT TRYING TO FIND OUT IF I CAN PROGRAM ANY REMOTE OR JUST AUTEL.

[@to87fin65]

I have to ask a question. I have 2015 passat and locksmith did findout problem on last coding phase new key. So i buy 2 used keys I did ask fron dealer is possible to code these they say yes. Today found out even dealer cant program spare keys to my car. Their solution buy new from them. Have you ended up these kinda problems on 2015 passat.

[@desirebruh7131]

Hey mate was reading the comments randomly but yes a locksmith can program you keys for a Passat( I know I’m 8 months late lol but you never know it could help) also I’m a locksmith 😂

[@Pascolololo]

Is there no digital lishi that can be accurate?

[@johnl8597]

What is the charge for something like this?

[@yayeo6520]

Hey man I’m working in the same industry and just wondering how old are you ??

[@dalinaheugene1783]

How much price is?

[@AmpaTV]

Please is there any way I can get training to open such a business in my country? My name is Ishmael.

[@jonathancervantes5080]

I just started making keys . The same thing happened to me programed the key and buttons didn’t wanna work

[@juanzuniga7662]

I’ve been thinking to start this kind of business in my town, which cutting machine/programmer do you recommend? Also do I need to be certified for this kind of business?

[@supp972]

How much for the job

[@rubenlaairgunners1872]

How much is that system setup

[@ammreid]

Strange the remote didn't work, those Ford systems pretty much take any of the remotes, old skool to any of the remote head FCC's.. Sure you had a battery in that thing?

[@CaptainLockPick]

I too thought this was strange. I didn’t battery test it but when I clicked a button the red light was coming on. Figured that meant she had battery. I didn’t show it in the video, but I even tried adding the remote like 3 more times.

[@iviufasamufasa1647]

EZ money

[@shawn2789]

I'm watching this while sitting in my work truck in DC. The industry here is not good. I've been sitting for 4 hours had 5 techs cancel. I called 3 companies and had 5 people call me back and not one of them worked for the companies I called. My office has a spare key and it's easier to wait for them to bring it to me than hire a locksmith in DC.

[@moustaphacheva3757]

THE IM 608 it ask you if you want to programme the next key , and you said "NO" than you you click "ADD KEY" i don't get it sir 😮

[@wendygarcia1995]

If you can help me would be awesome thanks need some advice with my stinky key

[@supp972]

How much???

[@alecjones7299]

Can you go a video on a Porsche. Thx

[@gabreeshy5760]

I jus found my fucking key

[@JacobCamacho]

How do you know this vehicle is NOT stolen?

[@benharris8644]

Who would steal that hunk of shit

[@ProLifeTours]

hey man great video, really want to get into the business but can't find any info on hoe much money you can potential make. would you share any ball park info? thanks

[@mash6178]

hi. did you get any info? looking into this also. if i get any i will share with you

[@ProLifeTours]

@@mash6178 nothing honestly

[@abdussalamshanna3810]

I prefer to show even how to use your machine clearly on camera

[@CaptainLockPick]

I’ll see about showing more on my machine.

[@ianjaeger4178]

how can i delete the immmo nissan xtrail 2003 germany in africa now im on one key . or junker and find full kes and immmi ign and door locks i lost immo on it feb a american buddy from seatle has a launch 431v pro it worked i needed the pin found 5 buck proggy on the net it worked hahaha all worked but i need a second key or just pull out the thingy tape it the ingnition and use my grinder to copy make my own second key hahahaha

[@Carmodifications74090]

Hlo, sir I am key maker Need a jab please reply

[@ashone185]

I dont Undertaand why you show us that. A magician does not reveal his secrets. Only for the views of KZbin

[@mykebill9402]

How did you get started in the business? Was it a big investment? I want to begin this career soon if you could please point me in the right direction 🙏🏿

[@robv.o.1777]

I would have deleted all of the lost keys

[@dnostro210]

fo38 is easy, do a hon66

[@CaptainLockPick]

FO38 would be hard in my opinion because it’s ugly to decode. Hon66 is takes a little longer to pick but is way easier to decode.

[@2815Juan]

Should he figure a way to install a Honda lock in a mercury? He recorded the job he was working on. No need to pick Honda cylinders when the code is on the cylinders.

[@ricklong3260]

What this guy is not showing you is that all he has to do is enter the vin on a computerized key cutter and it will cut the key..