Can it Take a K26? - Episode 17

[@ditto31]

I remember the days of adding 2 springs in my pen so the click was louder and more annoying.

[@el_loc]

Hungry Ditto I still do it😀

[@bryansuh1985]

Hungry Ditto only 2? I found out that mechanical pencils have much harder springs. so naturally I modded my pen to fit 5 of them. the end is starting to crack a bit though.

[@el_loc]

Bryan Suh once tried it, broke my pen and lost all the springs I put in it, because they flew all over the place

[@gari11c30]

You my sir are a genius. Im going to do it now TROLL

[@D.E.cipher]

Yay now i can annoy the whole class!

[@ProfessorPhysics2]

Tri-Strike stock spring works wonderfully in the Rey Blaster after taking out the AR.

[@maximumbob350]

I managed to fit a standard Rampage spring in my Rey blaster. You might need to squish it a bit to get it to catch, but it's definitely a big improvement. If I remember correctly, Drac did a full mod guide for it, which I found very helpful. presumably it'll be equally useful for the Han Solo blaster (I have one on the bench, but haven't got around to trying it yet).

[@meroastisruined3039]

Hmmmm, quick 16, speedload 6 and swarmfire episode maybe?

[@aidanwalker8992]

dude the swarmfire is a flywheel blaster

[@roastedalm0nds550]

Nathan Beck I see you fucking everywhere

[@lalshortshot2051]

Nathan Beck are you English I think your my long lost twin look at my vids to see me

[@ether1783]

The swarmfire can't do it, it's a flywheel

[@xtout]

Ether nope, it’s an electronic springer.

[@cathodewraytv]

The Rey blaster takes a stock OJ EAT spring just fine as bumps it up to "elite" performance. The other stock Elite spring I tried putting in the Han blaster had issues catching, may have been too long.

[@CaptainXavier]

Interesting. Thanks!

[@EDSKaR]

Reys blaster (Nerd mode: It's called a NN-14 in Star Wars lore) is probably my favourite nerf gun, but OMG IT'S SO BAD! I was waiting for you to notice that bonkers spring, your reaction was somewhat similar to mine. I have found that the barrel is so loose that brass fits straight in without having to even rasp it slightly. I'm also quite happy to hear you mention the C96 as I currently have a commission for a (RIF ish) C96 for a larper. It will never be a truly accurate replica, but it'll be alright.

[@jrdi3574]

Another fantastic episode of 'Can it take a k26?'. As always. :)

[@nathantalisien4284]

After seeing it in the Captain's hand and getting an idea of true scale and fit, I kinda want to get a Han Solo blaster. Remove the orange barrel and scope, do a quick paint job, and you've got a damn close look-alike for the 10mm Pistol from the early Fallout games.

[@Ms_Stabby]

If I can recall correctly, Drac used a Retaliator upgrade spring for both the Ray and Han Solo blasters

[@randomcommenter5330]

Ay yes one of my favorite series of all time

[@lukericszi2425]

The han solo blaster uses the same spring as the fortnite sp-l. the Etsy page has a 4.5 kg spring upgrade that will fit into it. It makes priming a little tougher but the results are 70-90fps output in my case... and i just got the Tobias Beckett version with the rifle muzzle and stock attachments.

[@eddie_peepee6179]

Captain Xavier forgot about the sonic ice

[@CaptainXavier]

Why so I did! Shame on me! :(

[@eddie_peepee6179]

😂

[@bengoldberg8451]

Even though it is the same thing...

[@aidanfriedfeld8889]

can you try to do a video on sledgefire spring upgrades. I'm interested in knowing what upgrades you can do to it to make a powerful handcannon.

[@Alexplainow]

Maybe your Han Solo Blaster is missing its dart pusher spring because mine certainly have one. Btw I think damper spring for jackhammer is probably the same style but I don't think they have puny 5(or 10)kg

[@EmoSquirrel781]

The rain in the background made this video really peaceful

[@Jonathan-kq6jr]

It'll double up just fine, but it won't triple very well; an upgraded catch spring might handle it, but it was rough on the internals.

[@Luke-ko4qo]

couldn't you sacrifice the ray blaster to double up spring

[@ryanray4399]

Luke! ITS (REY!)

[@Boragon77]

Regarding ob-solvers, could you change the attachment mech to something like the quick release of garden hole equipment? Seems like that way would be a really nice quick change.

[@CaptainXavier]

Yes. You could also go with something like a socket bayonet mount. But they are a bit more complicated and more expensive. Threaded or friction fit PVC is simple and cheap.

[@Boragon77]

Captain Xavier Fair enough.

[@froopty1854]

you can put a stock retaliator spring in the han solo blaster and then it becomes decent.

[@bryansuh1985]

the mega magnus can take the original, fire strike, rampage springs all at once. you can change the firestrike with a strongarm, rampage with a jolt, retaliator or a recon mk2

[@jackrobichaud6899]

For the Magnus, I put a retaliator and some small (I think jolt or triad) and it shoots very very hard. If I were u, id try that. And take the AR out so u can shoot rivals if u want.

[@seizedcarcass8440]

I would like to see the Rey jakku blaster with pump action but the spring would be an issue

[@Oniwah]

If you find an upgrade for the star wars blasters, I hope you share.. so frustrating..

[@thebinarysquad5962]

wonderful video, as always =]

[@beerenmusli8220]

Awesome Video!!!!Awesome Creation!!!!

[@JDavies345]

I wonder has anyone commished you to make either the ray or Han blasters to take K26 by any means necessary.... As in using maybe other internals like switch strikes or nightfinders(and others)

[@CaptainXavier]

+JDavies345 nope.

[@freeze-flame2447]

If you are curious about the rival atlas, yes it can, i opened one up and the srping is already super beefy.❄🔥

[@quincybrazeau5363]

I saw a vid where the han and Rey blasters can take a Retaliator spring

[@CaptainXavier]

Hey yeah? Cool! I will try that! Thanks!

[@quincybrazeau5363]

Captain Xavier no problem. I don't think Canada has those, but han is my favorite character, so I'm searching for one for cosplay. also I like modding

[@blackrat9177]

Captain Xavier lord draconial figured out how to MOD the ray and han solo blasters

[@quincybrazeau5363]

Captain Xavier and I haven't seen anyone do this, but I think that u can dremel out a little space of the mag and the screw port, and add a small enough screw to fit the spring of the internal mag, you can add an extra dart or two

[@purplethorium3812]

you should make a external magazine mod for the magnus

[@bryansuh1985]

AnAverageVeiwer wouldn't he have to make the magazine too then? unless you want to use the wimpy 6 round centurion's

[@neroforte6183]

Bryan Suh ei, don't forget about the BuzzBee Tyrant's 12 round mega magazine. (but i do not think they sell those mega mags seperately)

[@braydenturner3691]

just buy the buzz bee boss, i think

[@mercutio440]

hey X, would you consider doing a video about modding the Jakku blaster to accept external mags? There's a dearth of videos about the actual process for modifying the internal mag blasters.

[@mehtevas2653]

there was a darttag internal mag that held 16 Darts

[@cmfluffy9898]

man I love these videos

[@jedimetal6160]

Do you think that there would be away to 3d print a tactical rail to the top part of the Han Solo blasters so you have the choice of a sight cause I would love to be able to do that to mine

[@CaptainXavier]

I will spare you the snark if you can give me even a single logical reason why you would NOT be able to add rail to a Han Solo blaster...

[@dfkman]

In the Han blaster, try a Retaliator spring.

[@Stiny.]

I highly recommend "Goblins from Mars" for music

[@tZeUncleSam]

ya sould try to put a hammershot spring in those star wars blaster

[@TheCatpirate]

I know where you can get springs for the Han Solo blaster.

[@andrewvancil6193]

Drac found if he tightened the coils on a retaliator Spring it fits and gives a good boost

[@JustInTime0525]

Test a Sharpfire please, thank you!

[@stuartkseels]

How do you unscrew the blasters SOOO fast??? Lol.

[@the_giraffe3342]

I found a spring that works amazingly In the Rey blaster I got it out of an Airsoft gin and it shoots ridiculously far I got it out of a crosman marines Airsoft gun I don't know the exact name but it is cheap and easy to get the spring out plz comment back for more info

[@johannesviljoen9656]

Gotta love the magnus lol

[@magnus4658]

i put the magnus spring and cycloneshock spring in the cycloneshock. it was basically EPIC!

[@sinisterisrandom8537]

The Han solo blaster in starwars is called the Dl-44

[@aubreyredding9925]

wait! what about the speedload6 and the quick16

[@CaptainXavier]

+Hopefell Undertale Trash & Others What about them?

[@aubreyredding9925]

you said you did all of the internal magazine blasters but I still haven't seen them.

[@SnoNotHD]

Hey Xavier, think you could make an absolver from the buzzbee berserker? I think it would be absolutely comical and completely ridiculous but also beautiful.

[@CaptainXavier]

People have also recommended the Superdrum. I would love to find an air tank with that much power. Sadly Titans and even Drain Blasters are simple not powerful enough. :(

[@SnoNotHD]

Captain Xavier what if you used multiple air sources similar to the hornet? it might take some work but it's plausible,no?

[@CaptainXavier]

3 or 4 drain blasters might be able to manage it...might...

[@Stingray42285]

Have you up graded the hansolo yet and is the green one (beckett) any different

[@CaptainXavier]

I have not, and as far as I know it is exactly the same, just green.

[@Aech40]

Captain you can buy a Chinese knock off blaster that looks exactly like a regular Mauser. I haven't tried to put a k26 in mine though

[@CaptainXavier]

Will if shoot Nerf darts from an internal magazine?

[@Aech40]

it shoots propitiatory darts that are about Stefen length out of a magazine. you have to front load for full length darts

[@Aech40]

olli lehtonen yeah

[@EDSKaR]

Captain X, I've finished my C96 commission. If you want to see it shall I post pictures here or email them?

[@CaptainXavier]

Sweet! Email them to me!

[@louistapp3684]

Can you take the jakku guns spring and put it in solos gun.

[@weldin4runna]

Captain I need you to deconstruct and reconstruct a doomlands vagabond cause I disasimbled mine and don't know how to put it back

[@CaptainXavier]

I have one around here somewhere...

[@weldin4runna]

Thank you it's just so complicated the internals

[@thefandomconnoisseur8518]

Captain Xavier where do you buy your drain blasters? i am biting the bullet and ordering 1 online... none in the hardware stores near me

[@buucey4719]

U can use retaliator sprins on the last 2

[@buucey4719]

The original spring does not prohibit the springs it can use so chuck it

[@dmdizzy]

Since you mentioned the Mauser stripper clip, would such a thing be possible for the Han Solo/Rey blasters? Also, you missed the Quick 16 for internal magazine blasters.

[@CaptainXavier]

And the Quick 6 or whatever it is called. I have them both...complete forgot about them... And yes, I have seen someone make a stripper clip for Nerf.

[@dmdizzy]

I forgot that one! Perhaps contestants on the next episode? Or an addendum "17.5"?

[@cjmaidstone]

How about the quick 16?

[@rogueleader7506]

you can just put a orange mod works retaliator spring in either of the star wars blaster

[@MrRimant]

Another awesome vid Cap. Just out of curiosity are you going to be at NvZ this year?

[@lochlannwatling3482]

Sledgefire spring would probably work in the mega magnus

[@hoodedcreeper2465]

try making the spring float on the back of the plunger head

[@hoodedcreeper2465]

instead of in it

[@rmfberry261]

Any luck on finding a spring for the Rey and han blasters?

[@CaptainXavier]

I have no been looking.

[@flintax1553]

Errr when will somebody change the Han blaster to its original form a Mauser c96

[@connormartin1519]

The mouser c96 did take a mag later in ww2 but not during ww1

[@CaptainXavier]

Indeed. There are at least 18 major variants to the C96 and several of the later ones had removable magazines.

[@connormartin1519]

Captain Xavier thanks for responding back love your videos Nerf on

[@bengoldberg8451]

I would integrate a 18 round drum into the second one, making it a "quick 18" so to speak.

[@quincybrazeau5363]

are u adding the Barron on your loadout?

[@CaptainDugog]

Can it take a k26 bow style weapons?

[@littlemonkofwar2453]

I made a magazine fed han solo blaster and removed the scope

[@natefoley7003]

Captain Xavier do you know the nerf element? Would a air blasters tek sixes spring work to double the power?

[@CaptainXavier]

I have no idea. The Element can take k26 though.

[@natefoley7003]

Captain Xavier thank you

[@jackkirkland5639]

Would there be a hole in the top of the Han Solo if I sawed off the scope?

[@CaptainXavier]

Yes

[@dmdizzy]

Can you interweave the Han Solo blaster and Rey blaster springs?

[@CaptainXavier]

Probably.

[@dmdizzy]

Figured it might be worth a shot, since you're keen on customising that Han Solo gun.

[@infectedruby]

Can the thunder blast take k26

[@CaptainXavier]

(rolls eyes) ...hilarious...

[@nerdacedemy6947]

no it's air powers dude do u even nerf

[@benabad4186]

Nerd Academy it’s a joke.

[@StevenGonzalez-pu7yc]

captain xavier can the rival apollo take k26?

[@TheNecroman15]

having a problem finding the same mod drain blaster that you used to make your very cool blasters. all i could find was a red and blue ones that did not have the crosshach pattern on the body. can you give me the mod number and where to git them? thx.

[@CaptainXavier]

I cannot find them either. I had a source. I was nice. I gave it out freely. People bought them completely out of stock and they still have not restocked. So no.

[@clag1109]

How does a floating plunger head work exactly?

[@CaptainXavier]

It is an extra long plunger head with no center rod.

[@yaboidustin2447]

Congrats on 27 k subs

[@dr.jex___]

What about recoiling the k26 to be narrower?

[@CaptainXavier]

That would require industrial strength tools that I do not have.

[@zerodantheman]

Is there a list of all the yesses do far? I have lost track,...

[@CaptainXavier]

You know...someone else asked this. I have no complied one. I will have to do so.

[@connorgibson8837]

the thunderblast

[@rey2974]

Lol. The Thunderblast is HAMP powered, it doesn't use springs.

[@TrappedInTheMatrix]

Do you still have the rey blaster(and not want it)? I need one for a project I am working on...

[@CaptainXavier]

I do not, sorry

[@TrappedInTheMatrix]

@@CaptainXavier It ok. Thanks!

[@romulas-cushmanproject3273]

Notification squad represent!!!

[@durante5287]

here bruh

[@BiggestSancho]

Alex's Custom guns 👌👌👌

[@jackarmstrong8790]

Alex's Custom guns SALUTE!!!!

[@maclarenschell8855]

Alex's Custom guns a little late:D

[@brianleach6539]

Any idea if the Alpha Hawk can take a k26? Or any idea on bettering it?

[@CaptainXavier]

Not yet, I do not have one.

[@brianleach6539]

Captain Xavier I saw some people said it was reminiscent of the Specter. I know OMW has a spring for the Specter and I hope that it's compatible.

[@benjamin8558]

Can you make the Magnus Pump Action from the bottom rail

[@benjamin8558]

You live in GA too? or another state?

[@CaptainXavier]

I suppose I could. I live in Washington

[@ryanray4399]

Why is it the Jakku blaster it was given to Rey on Takodana

[@CaptainXavier]

+Ryan Ray I believe Jakku, in this case, refers to Rey. As a last name place holder until her lineage is revealed. Sort of a "Rey from Jakku" sort of thing. Similar to my character's name. Capitaine E'Xavier de Normandie. ("de" means "from" so it is E'Xavier from Normandie)

[@orcatwar9810]

can you do a mp5 mod on the caseian ander blaster

[@b3llow524]

Han solo blaster upgrade video!!!!! THUSLY SI'L VOUS PLAIS

[@altwelve1]

why don't you do the boomco magnum from the halo line?

[@CaptainXavier]

I don't have enough boomco springers yet to do a full episode...someday...

[@cyber4053]

Why don't you take the spring out of the Rey blaster and put it in the solo

[@CaptainXavier]

Because then I will have nothing in the Rey blaster... Apparently it can take a Retaliator spring so I will have to try that.

[@JalMoko]

what about the carbine version of the c96?

[@CaptainXavier]

What about it? There are at least 18 major variants to the C96.

[@base330films9]

No yeses :( A pity. Have a good day, cap!

[@TheKaosity]

this is kind of a weird concept but what about a series where you open up blasters and compare the internals to see if it is, "just a reskin?" just throwing it out there

[@tylerchase7647]

u sold mod a deploy and paint it i love it i now it is not the best but it has optinchl

[@donthecon]

great vid! my favorite series, I was wondering if u happened to have any raider style stocks for sale possibly?

[@jasontower7423]

So cool!

[@jasontower7423]

Thank you for telling me to go to hard where stores for springs!!! I got 12 and 4 of them were new catch springs!! Can't thank you enough - Max power

[@CaptainXavier]

:D

[@foxstep1175]

hi captain love ur videos

[@themadquacker1462]

It might be a little detail, but it's awesome how you time lapse the unscrewing of a blaster. I hate videos that make you sit through 5+ minutes of a picture of someone's hands, a blaster, and a screwdriver, and there is no point in watching the disassembly.

[@ryleeortiz5249]

what's the difference between a reshell an reskin

[@CaptainXavier]

Besides the spell? Reshell usually means it has a different shell design but the same internals. Reskin typically just means a new paint job. The two are used more or less interchangeably.

[@justinfowler4539]

please do the roughcut

[@allabouttrout6831]

Happy birthday again 😀

[@CaptainXavier]

Thanks!

[@judahgraves9837]

Did you see Walcom's TAg back on the stampede?

[@CaptainXavier]

I have not...should I?

[@judahgraves9837]

He has some different opinions on it...

[@austinm4560]

no offense but u dont have the quick 6 or the speed 16 dart tag guns

[@CaptainXavier]

...I do...and I completely failed to think of them...

[@larce4158]

Why would one make the Rey or Han Solo blasters magazine-fed? It would just be a Retaliator.

[@CaptainXavier]

Place a Han Solo Blaster next to a Retaliator and see if by any chance you can see a difference between them...

[@larce4158]

Captain Xavier Haha yeah I know but they would function the same.

[@MrBuyamonkey]

46.001 subscriber also congrats on 46000 subs