Car Alarm and Remote Start Wiring In Detail

In this Video I Go Over Car Alarm and Remote Start Wiring In Great Detail.
Be sure to also watch my 5 part series / playlist on the installation job from start to finish.

[@digitalbilly]

i used this video 11 years ago and its still so helpfull thanks for keeping these videos online!!!

[@PhiMobileSounds]

Quick Table of Contents / Timeline to the video (Reference Only): 1:23 - LED Plug (2 pin) 2:00 - Shock Sensor (4 pin) 3:15 and 5:32 - Safety Remote Start Disable Switch (2 pin) 4:55 - Door Lock Trigger (3 pin) 5:01 - Valet Switch (2 pin) 5:32 - Safety Remote Start Disable Switch (2 pin) 6:00 - Satellite Ignition Switch Auxiliary Harness 8:55 - Remote Start Harness (5 pin) 12:25 - Second Unlock (Priority 2-Stage Unlock) / Secondary Trigger / Factory Alarm Disarm / Glow Plug Input (Wait 2 Start) 17:20 - Primary Harness (Not as described in the video) - Input / Output / Triggers

[@kennethnicklowicz1030]

i have done several alarms, and i think the lock relays might be a video worth doing, some dont actually understand how those relays actually work, and took me time to realize they can make a neg a postive and vice versa :)

[@dtnel]

Man ur ageing. Watched videos of ur's yesterday & today. Seeing the older you reminded me that "hey he didn't look like that from what I remember" . Also found 1 of the 2-3 videos I'm looking for concerning my model yr Tahoe ('04) I already mentioned in another video before seeing this one. I do have the fortin red round programmer device. Glad I found them as figured they got stashed in a tub in garage. BTW manual transmissions are great. Great gas mileage (soon we'll have "electric mileage"), less maintenance vs automatics transmissions. I remember back in early 90's when I bought a Geo Metro new they wanted more for A/C and also if you wanted a Automatic Transmission. Now I need to check this wireless device deal out I saw in another video on your KZbin channel.

[@franciscoramon102789]

Best alarm description I've seen helped out a lot was able to finished my install in minutes thanks for the video

[@Lesscoelectronics]

ty

[@cyipray]

Great video once again. You make everything so easy to understand. Way better than jus lookin at the wiring diagram. Thanks again.

[@josejimenez8180]

he how r u lessco electronic I have questions how can I add my windo defroster on my 5906 can u send me the diagram please

[@GHSBryan]

I will be honest I didnt buy my remote start from you guys but its because I didnt know about you till I figured out how much of headache this was going to be and did some research and ran across this. I would be willing to pay you to pick your brain about installing this Avital 5303 on my 1998 toyota tacoma. Just let me know if your interested and best way to communicate.

[@greek417]

Love the tutorial. You are an excellent installer. Dud you ever do a video on how to safely install remote start on a manual transmission. I have a viper 5701 in a dodge stratus 2dr sxt but the remote start was never hooked up because it's a manual transmission and I was told it was to dangerous. Thanks

[@michaelpapscun9618]

Great video! I saw this tutorial, and in it you hold up a micro-toggle switch and say that it can be used for a little trick-of-the-trade solution for installing a automatic trans remote start system into a manual trans car. Did you ever get around to making the tutorial on this? (With all of the videos, and the business, and family, I know that your time is stretched pretty thin, but the switch idea has intrigued me very much) Thanks for any/all help! Keep up the great work!

[@Lesscoelectronics]

I did make a quickie on the topic, but not as detailed as I think the topic requires. It's a to do item on the list and I promise I'll make it soon

[@superman2926]

Great videos... I actually brought that exact same alarm for my first car alam so this video is extra usefull thanks alot

[@Lesscoelectronics]

No problem, Theyre easy to me, Whatcha need?

[@Lesscoelectronics]

1- yes, for an app guide use directed dot com 2-factory disarm is factory security integration at its simplest. its necessary (if the car is so equipped) so that the horn doesn't drive you crazy when using your new remotes instead of the originals. for the wire info, watch the free tech sheet video I just uploaded, all the info you need and more is there and all free

[@jomartin9345]

Does anyone else love the way he says Toyota! 4:27 ToyYoder

[@Lesscoelectronics]

No, but if youre looking to do that, look at compustar's drone and the fortin bypass, theyre plug and play and waaaaay better that DEI

[@Steveh4263]

The videos are great. I like the way you keep the wires together. How do you feel about wire looms? Probably would make the install look better. But would make it harder to get at the wires though and make it harder for a car thief as well. I'm interested in how you go about mounting the car alarm's antenna in the car? Do you have to remove the A pillar trim piece? How do you route the car alarm antenna from the windshield behind the rear view mirror to the car alarm?

[@MrPaulb1259]

I have a autopage remote starterer on a 1994 chevy pick that is starting to give me all kind of problems from flooding out getting tons of black smoke when it does start, not starting, doors not locking but alarm goes off if opened, running bad not wanting to take gas, turning key over and nothing happening until I press the brake. Can you help me at all? Afraid it's not going to start one day and it is my only transportation. Any suggestions? Thank you in advance. Love your videos.

[@ricardobarrios3626]

You guys rock! This video is going to make my installation much easier. I do have a question about the defogger wire.. Do I need a relay for the connection on a 97 Camry or can I connect it straight to the defogger switch? I'm installing the same Alarm System.

[@GHSBryan]

I am not sure who this was directed at but I have a question about a 1998 toyota tacoma neutral saftey switch. I think I need to install a relay or something to make this work properly but I can't seem to rap my head around it. The neutral saftey switch breaks the power side to energize the starter relay.

[@mikeeyg1977]

First. Thank you for taking the time to make this video. Its pretty detailed. I have a 2011 Crown vic. It being a P7B It is pretty basic. Power W/L and seat. no factory alarm at all. I also have this exact alarm. I feel cofident I can install with some patients.lol. the things that I need to know and can probaly google but wanted to ask you. Door locks i would like to use the 4x unlock feature and flash the head lights as the alarm trigger lock/unlock/sounding. im just tring to figure out door lock and light polarity would you happen to know? My wife wants one on here old saab 95 but i have read its a nightmare and no pro will even touch becouse of the TWICE security. Even though i do have a spare key i can leave tie wrapped near the ignition for singnal. thank again so appricative of this video

[@trixdeed]

Thanks for your videos, they are very helpful. I just installed a remote starter today. When I tested it out, the truck would fire, then die, and starter kept cranking until I pressed the brake. Any suggestions?

[@Lesscoelectronics]

check the tach wire and be sure all the ignitions are powered just as the key would

[@triciawalker2080]

Awesome video! only question i have. I found the door trigger negative wire. But on the directions the only wire left is the yellow wire labeled + ignition output (to alarm) Will this work?

[@waltersaldana917]

Hey what's up buddy I have a question tha thing is that I have installed a push start/keyless entry system from Ebey,I have a 04 nissan maxima and I have a positive door trigger system but the starter system only comes with a negative door trigger ,what are my options and I heard that there's 2 ways to tap in to the door system ? So pleas le me know what can I do in this cas and thanks for you video very helpful 👍

[@Lesscoelectronics]

pin 87a on what relay, is that a regular relay or an onboard relay in the alarm itslef?

[@PhiMobileSounds]

Unlock wires - What do you think about the 451m? Do you use them personally or do you find it instinct to use your own two relays for something like a Ford one-wire door lock system?

[@winston0079]

Where Is: (parking light isolation wire - pin 87a of onboard relay) Goes In My Car alarm System. BTW: Excellent Video Thanks

[@29lmarquez]

I'm installing a Viper 5704 into a 06 Odyssey. I enjoyed this video VERY much but there are a fewused wires that were not covered and was hoping you could clarify for me. I am going to list them and you can just tell me if I need them or not. First is Parking light isolation wire, Flex relay input 87a key side and Fused (30a) accessory/starter input. I also have an Ignition 1 input/output and a Fused (30a) ingnition 1 input...which one do I use as the Ignition 1 wire? Thank you...the videos are great.

[@eddsramm1]

Great coverage! but I did you cover the main ignition 10 pin harness?

[@TM-xr7oc]

Hello Friend I purchased and been installing an Easyguard EC200-K9 alarm and remote start system into a 2002 Chevy Silverado LS1500 with a Passlock 2 VATS. If you are familiar with this system, can you please help me with finishing up the install. Alarm functions work well. However when remote starting the engine, the engine cranks but will not run. All connections appear well connected. Does this system require a bypass module? Any suggestions on how I can do to fix this issues?

[@Lesscoelectronics]

Why dont you just tie that into the ebrake? its alot easier, wire it so the starter sees ground only when the ebrake is on (since that wire looks for an open or + circuit to engage the starter remotely) I never used neutral safety wires since theyre typically next to impossible to locate). and its a good habit to have the ebrake on while parked anyway...

[@bahlowwings]

Hi. Im trying to install a basic keyless entry in my car. It seems your very familiar with the avital systems. I was looking at the avital 2101 and the 3100..i noticed that the 2101 horn wire is a (-) which my car horn is..and the 3100 has the siren i believe and a (+) brown wire. I only plan on keyless and horn. Now can i attach the 3100 (+) brown to my cars horn wire without a relay. Or should i just go with the 2101 with since i have a (-) horn wire in my car. To me both systems are similar but with 3100 having a shock sensor . I dont plan on installing a siren.

[@joeq3082]

I don't see anything about the Power Relay that goes to the ignition. I'm trying to set this up on a 05' Tahoe and the write up of what and where each of those wires go is very poor. I think I'm at the conclusion that I will have to build a relay to run acc.2 but I need to find a gwr from that exact remote starter you advertise here. Or shout I grab the GWR from the 4 wire pig tail that comes off the High power relay?

[@kcroc44]

I'm installing this alarm with a dball2 in d2d mode on a 2004 avalanche z66. I need to power a 2nd accesory wire (brown) and I'm stumped as to which wire to use. would I use the orange wire on the 4 pin relay harness

[@Lesscoelectronics]

what model alarm are you working with?

[@waltercoello6116]

I have a question we have a 2002 ford explorer xls we installed an avital remote starter alarm everything is connected I just need help with domelight and green wire and violet wire I don't know where to connect them at. Because when the alarm is activated when u open the door it's supposed to sound the alarm. Can u please tell me which wire goes where and for the trunk also. Thank u.

[@2004evick]

Hello I just got a Viper 5704 car alarm. I have no fears on wiring it up but there is no installation book. Also the book it did come with said I needs a Bite computer thing to program this unit. I dont mind buying the bite thing, however why spend the money if I don't have too, it sell for $100. I'm working a 97 Dodge Dakota no chip key. DEI seems to be the only place to get the install book but you must be a Lic tech of theres to get it. Can you help.

[@watsondixon6288]

I have a 10 pin connector and one is for instant start programmable but for - default and + output. Where do I hook this wire. It is a encore 5 alarm system

[@kennethnicklowicz1030]

btw i used the status out (on mine its blue too) to a relay for the clutch so its switch isnt completly bypassed like the installer did on the older alarm

[@Steveh4263]

Also how to route the hood switch from the car alarm to under the hood of the car, as well the car alarm's siren as well?

[@mrbungle6visix]

so the four pin harness is not needed unless i am running a few accessories ? the orange purple blue pink one

[@kcroc44]

I'm installing this alarm with a dball2 in d2d mode on a 2004 avalanche z66. I need to power a 2nd accesory wire (brown) and I'm stumped as to which wire to use.

[@moisesrivera455]

Hi Lessco Electronics. I went under the dash board and checked my alarm fuses because it wasnt working. It ended up needing to be reset only. But when checking fuses I took both out (red fuse 10 amps) (blue fuse 15 amps) at the same time. From red constant power and white cable respectibly. I forgot where each fuse goes. from watching your videos looks like red 10 amps fuse goes in red constant power and blue 15 amps fuse goes in white cable. Can you confirm it just to make sure.?

[@jaykra11]

I have a Xpresskit bypass module PKALL in needs to know how to wire it to my remote starter for a 1999 Grand Marquis with the PATS system, thanks for all ur help on all my other projects

[@miketheberge4181]

Can you show how to wire the 4103 model to an 05 cadillac cts please !!!??

[@williamrobin790]

Hello, I just recently purchased a Viper 4204V remote car starter online and it didn't have a wiring diagram or installation instructions, could you please help me with this I have no way of installing this without these instructions. Nowhere did it state that it had no installation instructions or wiring diagrams and the wires for the control unit aren’t marked. I'm installing it into a 2012 Hyundai Tucson. Thank you for your help in this matter. Bill

[@mikerenza2253]

Im doing second remote start which is on a 97 mercury grand marquis and i looked up 5 different wire sheets and some say theres 3 ignition wires and one accessory and some say thers 1 ignition and 3 accessories.and another says 2 ignition and 2 accessory.which one is it?

[@banipena3222]

I'm getting an inhibit message on my remote control when I try to remote start my 1998 Ford F-150 (no factory alarm, no keyless remote system and no transponder). Everything else is working ok but I can't remote start my vehicle. Also, can you explain how to install the dome light feature and wire the door triggers to the system? Thanks

[@seanmark32]

i have a 2000 Lexus is200, and having trouble with the lock and unlocking function with a Clifford matrix 12 alarm. do you have any possible solutions.

[@SaaifKhan888]

Hey, I know that this is an older video, but I was just wondering what are your thoughts on Crimestopper remote starters? Specifically the RS7?

[@PANTYEATR1]

you have a great car alarm video series, it's very clear and well done, thanks. I do need your help tho... I have a 95 mustang GT that I'm gonna install a Python 5106P into. the alarm installation guide and the vehicle diagram sheet have some terminology that I'm not familiar with. in the alarm install guide, what is a FLEX output? parking light isolation wire (pin 87a of onboard relay? on the vehicle diagram sheet, it talks about my power door locks being TYPE B since I have factory keyless entry, but only give instruction for TYPE C door locks which are without factory keyless entry, what do I do in that case?how do I wire the negative 200mA dome light output? is it safe to say that all the mA wires will need a relay on it? how is the relay wire for that? lastly I have a factory truck release, the alarm has an Aux 200mA negative trunk release output and a trunk pin / instant trigger input (N/C or N/O). what do I do with that? thanks in advance

[@Lesscoelectronics]

+PANTYEATR1 since you have so many ? just call me, It'd be bettter I think, 904 342 5491

[@PANTYEATR1]

+Lessco Electronics thanks for reaching out Lessco, from one New Yorker to another. from watching your videos and others similar to yours over and over, i started to understand more. What i found i need to to is hook 86 & 87 to a constant 12v, 30 to the load item and 85 to the alarm that supplies the 200mA ground.

[@Lesscoelectronics]

all that stuff is DEFIETLY not alarm related, maybe the not staring issue, but thats about it. and the starter kill relay is 3 dollars to change, Id start there and go forward

[@Maximus98970]

Hey sir. I have a code alarm remote start. Is there any way I can connect only the wires that turns my car on without connecting under the hood pin, lock and unlock function and the parking light thing. I'm trying to use it on a 2008 Toyota sienna. Thank you for this awesome video!

[@Maximus98970]

Also I'm not planing on getting a bypass. I'm just going to use an unwanted"not cut just programmed" key inside the car at all times.

[@cyrusent]

i am try to make my remote start work i have a presige alarm aps-25n i got every thing to work but that wat wires do i hook up for it to start up for remote start my car is a 1984 chevy caprice

[@brown283853]

Hey! like your videos and the way you explain everything in detail so I have a request! Some butthole broke into my car and stole my radio, so I just bought a Excalibur AL-2050-EDPB with a OL-Blade-AL64 for my 2002 Ford Mustang V6 (3.8) Manual Transmission and I want to install it myself but I need some help! So will you please do a video on how to install this product on my car! Please man, I really need this!!! Thanks!!!

[@banipena3222]

Never mind I fixed. But here's the crazy part: Now my domelights flash 3 to 4 times after I turn off the car and all my gauges work only when I turn on my dome lights from the headlights switch. And I have not installed the door triggers and the dome light feature of the alarm system (Avital 5303)!!

[@seandarling4121]

I have an oil direction wire. Where do i hook that up to?

[@DavidGarcia-pn7ik]

I'm trying to install a simple viper 350 with keyless entry on a 1999 Pontiac Montana. Would I need the bypass module, if I do which one? and what is a factory disarm is this just for remote start and how is it wired?

[@jeremyashley1]

I have Nissan Maxima 2010 Push to start - The Alarms directions say to access the (-)LOCK and (-)Unlock at the BCM (body control module). Does this BCM require DIODE to protect the BCM? The manual does not state that it does...?

[@Lesscoelectronics]

No - you don't need any diodes in that application at all.

[@osmanhabeeb9892]

Hi thanks for the video. Can you please help me. can I cut alarm wires and then reattach them again? I need to replace my VW polo classic 2001 cradle and the problem is that I can't remove the cradle unless I removed the alarm (I belive the alarm's computer) since it going throuh the car cradle to the other side.

[@brandonjay5146]

so ive got a question customer one day after a long time started blowing back of head unit fuses as soon as harness is plugged in until i unplugged the stering wheel interface and it quit blowing the fuse any ideaa?

[@filibertocolon245]

i'm installing an alarm/remote start and i have 2 connections im confuse with first oneis Start Sensing connect where do i connect this cable too. an to other one is engine cut of circuit. where should i rewire the relay too.

[@CayRome]

Thank you very much!

[@Lesscoelectronics]

you dont need to use diodes on your civic door triggers, diodes just oppose polarity feedback, dont even bother with it

[@Lesscoelectronics]

What do you mean by lagging?

[@Mr.Preston3991]

Got a car with remote start installed, however it came with no remotes, and the factory fob won't work because the system was bypassed. If I find the remote start system, will I be able find out what model it is and find a replacement fob for it?

[@Lesscoelectronics]

Sure, If I can help you with that I'd be happy to

[@heyitschinoable]

Thanks for the vid and reply bro! so excalibur omega compustar and clifford are all good? Im looking to do the install myself so i dnt wnt to doubt myself. Which one do u have on ur 300? That shits on viper?

[@Lesscoelectronics]

I personally use the omega crime guard 830i7 on my own car.

[@heyitschinoable]

Lessco Electronics yea i seen th unbox vid u did on it sounds like a great alarm and looks of good quality. Thanks for the replies

[@jonhuddleston3976]

I'm having a problem I just got a remote start in stalled and now my check Engine light is coming on for transmission codes and when I un plug the auto start from the purple wire Wich is the data bus wire I clear the code and the check Rhein light goes off when I plug it back up the light comes on again after I start it a couple times with the dames codes and its on a 05 Avalanche plzz help

[@HECLUV2476]

this video was very helpful but for some reason you don't show the power harness ... i have a python 5706p and it has an extra 2 wires red/black and pink/black ... what are these wires for?

[@HECLUV2476]

please... i would really like to know

[@Lesscoelectronics]

what does the install guide call them?

[@HECLUV2476]

pink/black-(+) flex relay input87a key side(if required) of flex relay red/black- (+) fused (30a)accessory/starter input

[@TruckDriver326]

I like to see some one add remote start to a semi truck.

[@mengsong7554]

Do I connect it directly to ground or need a relay?

[@Ashroyer86]

Sorry if you talked about this (I can't hear you very well on this video) but What's the minimum amount of wiring needed to make the module start the car? Can I get away with only wiring up the main power harness, tach signal, and antenae wires?

[@Ashroyer86]

+Ashroyer86 ......and of course the ground wire.

[@jesusmachen9195]

So this type of alarm remote start does not need a start kill relay

[@73superglide62]

Is there fixing a fog just stoped working or

[@mengsong7554]

I'm about to do an install on a 2009 Pontiac Vibe with Excalibur Model AL-1660-EDPB. It's a remote and security unit. The bypass module is a Fortin Evo Key. I just have a question. What do they mean connect negative GWR (Dk. blue from the Bypass) to remote starter negative while running? Do I just connect it to any negative ground wire? Please help.

[@Lesscoelectronics]

gwr is ground while running ( also known as 500ma negative output for ugn 3) eother will trigger your evo key fine.

[@MannyDelReal]

i have a few questions i recently bought a honda fit and i seen that it has an alarm it says pursuit h50r52 on the brain but i have no fob or i dont even know what model number it is is there a way i can buy a control for it?

[@mrbungle6visix]

also you said you explained the wires on the relay satellite . where? is it in another video ?

[@capthelightman]

having problems setting up my 4003 pp add on no remote with it no antenna to my 3100 avital can get valet system to go to program and few wires I don't know what to do with

[@wilmerpaulliz159]

Hola, tengo un problema con ese tipo de alarma me darías algo para poder comunicarme contigo para asunto de explicación

[@ScottysDetailing]

Do you where I can get a wiring harness diagram for an alarm system install?

[@Lesscoelectronics]

I can give you a free vehicle wiring sheet

[@bradleybauder9043]

Okay there is probably a rediculusly easy solution to this, but I have a omega Al-2060 EDPB, and I'm looking at the main 6 pin connector. It has high outputs for the starter and the ignition witch (10 guage wire I belive), but my 2006 Hummer H3 has very small ignition wires. leading me to belive that they are 250-500mli amp wires. And excuse my french, but I've looked through just about every damn fourm and looked though hundreds of videos. How in the hell do I get that down to a low output so that I don't fry that wire?

[@AshrafulIslam-uz3bd]

Hey man, nice videos, they help a lot. Just a quick question...that ON/OFF neutral safety switch...do you really need to install in on an automatic?

[@Lesscoelectronics]

+Ashraful Islam definitely not, I just ground it along with the black lead

[@AshrafulIslam-uz3bd]

+Lessco Electronics okay got it, also do you have any info on how to install the rear defogger wire? I know there's a relay involved but it's confusing. thank you again

[@Lesscoelectronics]

In most cars you can grab the latched output at the back of the switch.

[@AshrafulIslam-uz3bd]

+Lessco Electronics oh okay, I have a 2010 Rav4, hoping no relays are needed lol

[@lazal3m]

I'm in the market for a new alarm, I'm currently considering AutoPage C3-RS730 & Avital 5303L. If you have a better suggestion for the same price range as those 2, please do tell me. Features I need: Proximity sensor Power window modules At least 2 AUX channels Starter-Kill built-in Trunk Release Output Hidden Valet Switch preferred Easy/Descriptive feature/menu configuration (possible in the remote display?) User-friendly/Complete descriptions/icons in the 2-way keyfob Bypass module not required Thanks!

[@Lesscoelectronics]

look at the cg-830i8 by crime guard

[@lazal3m]

Lessco Electronics Thanks!

[@lazal3m]

Lessco Electronics By the way what is the difference between cg-830i8 and the Excalibur AL1851-EPDB?

[@Lesscoelectronics]

the crime guard has a nicer warranty and free theft insurance plan included

[@TheRuskyamafia]

you forgot the remote start harness. is there a seperate video you made for that?

[@Fatstogey]

Yup great vid except for forgetting the remote start harness. Thats the one i needed. With the starter kills and how they are relayed and what not.

[@MrHengDoItAll]

hey i living snow and cool area. i want one this . do you think this product will work on honda civic 04 ? or any product will work on this car ? thank you

[@Lesscoelectronics]

you can use any starter on the civic, its not the starter kit that makes it compatable with the car, its the optional bypass / integration module that does, and for the fit guide use one of these sites: ifar.ca for fortin, idatalink.com for idata, caralarm.com for omega link

[@bernzee6493]

Hi, I got a 1998 Range Rover, and some times the vechicle will not start, and the parking lights may start flashing, when you turn the ignition switch nothing, dead, I wait few ninutes and it may start again, some one told me that it is the alarm system that shuts off, how can I disconnect the system or repair it, thanks

[@crisdiamond3789]

Where would I put the tach in a 2005 toyota camry?

[@jacobcraine8509]

I have a 2006 Acura RSX do i need to factor in the factory disarm and rearm wires? I have a avital 5303 with a Xpress Kit Dball2.

[@jacobcraine8509]

If so do i need a relay for either of them?

[@sashatvayy3228]

Hi, when can I locate the valet/override switch to program remote control on my Freedom 150 alarm?!

[@726nick]

Hi I have 99 toyota camry and i am going install viper 3105v 1 way security sys do i need any relay for domelight supervision or anything else ?

[@markeithlittle2660]

Will this be good with 02 GMC Yukon cause some say I need a bypass module

[@garywithrow1912]

well like I said , went u operate from driveside it will lock both doors went u unlock it will only unlock passenger side not the driver side . also the mirrors in and out not up and down

[@david333331000]

is there any wire that goes to the stop lights

[@EvendimataE]

are there new alarm systems with fcc id j5523518r? or are there new alarm systems with the same connectors as the old delta brand....so I can just transfer the connectors and don't have to do rewiring?

[@Lesscoelectronics]

I doubt it, I haven't seen that fcc in years

[@banipena3222]

I can remote start the vehicle with the remote control, but it doesn't matter if I put the key on the ignition and slide it to the on position first, the car will shutdown after I press the brake pedal. Also, I can't start my vehicle using the key. Not even the radio when in acc position. No lights on dash, nothing.

[@zacharykilian557]

i have a viper 5706v, and i dont know which ignition wires to connect it to. Please help. 1 NC No Connection 2 RED/BLACK (+) FUSED 12V ACCESSORY/STARTER INPUT 3 PINK/BLACK (+) FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY 4 PINK/WHITE (+) IGNITION 2 / FLEX RELAY OUTPUT 5 RED (+) FUSED 12V IGNITION 1 INPUT 6 GREEN (+) STARTER INPUT (KEY SIDE OF THE STARTER KILL) 7 VIOLET (+) STARTER OUTPUT (CAR SIDE OF THE STARTER KILL) 8 ORANGE (+) ACCESSORY OUTPUT 9 RED/WHITE (+) FUSED 12V IGNITION 2 / FLEX RELAY INPUT 87 10 PINK (+) IGNITION 1 INPUT/OUTPUT

[@luispizarro3569]

Question my bro gave me his alarm autopager rf_ 310 and for some reason I can't find the valet button could I make my own valet

[@joseluissaavedra4364]

Hi, I have installed viper 5901 remote start alarm. When I start with the remote control and is unlock the doors, the car start but don't lock the doors, if I start the car with the key this locks the doors perfectly, do you know what's wrong?

[@Lesscoelectronics]

sounds like you are missing an ignition input to your system

[@MsRican143]

had my remote for about 6mo, and now its dead, even new battery installed. its Avital 7352L any suggestions??

[@haitianbikerboy1]

man i have a viper 5901 on a mr2 spyder for some reason i can't get the antenna to talk to the brain to program it I change the brain and antenna still nothing can you help plz...

[@Tenkolazy]

the orange wire was hooked to a 12v on the relay

[@Lesscoelectronics]

what problem are you having exactly?