Quickly becoming my go to car detailing KZbin channel
@kylebouyers516 ай бұрын
I love this channel. I literally come here for reviews on every product I look at for my business! Much less expensive than trial and error.
@ssclassof20002 жыл бұрын
When I wash, I drive my vehicle onto 2x6 planks (one short piece per wheel) so that I can access the bottom of the tires. It works really well
@LilyLuna-242 жыл бұрын
I just back my car up until the bottom is at the top, lol
@longislandcerealkiller63852 жыл бұрын
I use a floor jack just so the wheels spin
@jonathangodinez3042 жыл бұрын
I remove all 4 wheels to apply tire dressing
@longislandcerealkiller63852 жыл бұрын
@@jonathangodinez304 yes good idea but I always think about liability when it comes to coustomers I do that to my daily driver at least for my own car
@hockey1720132 жыл бұрын
I do the same thing but with rv leveling blocks. Cheap and waterproof
@DSD2 жыл бұрын
That's perfect, I was going to ask how you'd do it on a AT truck tire and you demoed exactly what I wanted to see! KO2's are nice tires!
@dutchtech2 жыл бұрын
Very nice results. Proper use of those brushes and technique is the way to go. Thanks Josh for making it so simple.
@Nicholas-db5sl7 ай бұрын
I use a smaller round tipped detailing brush to get into the nook and cranny of the tyres sidewall relief pattern. It avoided sling, but do allow to dry.😊
@Dcervantes243 Жыл бұрын
I have found a medium density brush works really really well for dressing application. Such as a boars hair brush or even the salt and pepper brush from chemical guys at walmart.
@bbaaspencer15 ай бұрын
I do that, then drive 12” forward to get the dirty bottom to the top and now get it 100% clean. People always leave one spot on the tire dirty!
@sandoutlaw852 жыл бұрын
Now I have to go buy a brush cuz I have all terrain tires lol I just bought the lil pads to dress my tires 🙃 but I'm glad I seen your video never thought to use a brush
@glenf41152 жыл бұрын
Try a soft (white/gray) carpet drill brush. Use it to quickly scrub the degreaser into the tire and then wash both tires and brush. When tires are dry use it again to quickly apply the tire dressing.
@imjoshv2 жыл бұрын
Interesting idea using it to apply the dressing as well.. Ill try that out!
@MrGregpayne992 жыл бұрын
Great channel man!!!!! One of my 3 go to channels for car detailing videos. Keep it up
@Ccortanaa6 ай бұрын
Hey Josh, when you are finished using the microfiber applicator pad, what's the best way to get them clean and rid of most of the chemicals for the next use? Should you dunk it in a bucket of soapy water a few times and squeeze? Do you ever put a bunch in the washer?
@AngeloPaggett2 жыл бұрын
Cover all tire shine claims to have no fling it works perfect. Probably would be great for this
@davestewart91462 жыл бұрын
It’s great that you show taking care of manly tires, I have four vehicles with off-road tires in my family, great tips, thanks Josh 👍👍
@adarsh8099 Жыл бұрын
Can we use the same brush for tires and rims? Like just brush for the entire wheel
@timothyheil81632 жыл бұрын
Josh, ive been lots of your videos, but i cannot find a video that you tell what you use for carpet prep cleaner you spray with. Will tell me what you use. Thanks,Tim.
@kathy12562 жыл бұрын
The tire looks fantastic! Very impressive!
@Pittsburgh-4122 жыл бұрын
I picked up mother's speed tire shine the other day and I was blown away. I've never seen such a wet and super shiny tire dressing like this. Just have to block the wheel with something so it doesn't get onto it. But you should check it out Josh
@KiranPatel-fk1pg2 жыл бұрын
Why would someone want their tyres too look cheap and shiny?
@Pittsburgh-4122 жыл бұрын
@@KiranPatel-fk1pg lol what kinda tires do you like? Dull and dirty?
@KiranPatel-fk1pg2 жыл бұрын
@@Pittsburgh-412 No I like satin black tyres. Not tacky looking shiny ones. This is why most new tyre dressings aren't shiny and are called a dressing... Tires shine is the shit people used to use 20 years ago from armorall
@g.fortin32282 жыл бұрын
Any options for making tires black and clean.. without shine ??? i hate shiny tires on an SUV/4wd makes it look like a grocery getter . Any matte option ?
@filipinofantasy2 жыл бұрын
I use cover all. It’s in a blue can
@haygood92 жыл бұрын
I’m a new subscriber, loving your videos. 👍🏾 don’t turn Hollywood, stay grounded.😀
@ddautodetailing2 жыл бұрын
Great video! I have a couple wheel cleaning videos as well. I'm going to have to give that tire dressing a shot, it looks good. I've been using Xtreme Solutions Longevity on my tires.
@DETAILINGDETAILING-hb7bj2 жыл бұрын
thanks for posting. now back to black wheels, best way to brighten (shine) black colored wheels?
@robertrobertson51202 жыл бұрын
Another fascinating 'tip' video!
@AnthraxVX2 жыл бұрын
crazy, there is a detailgreen down the street from my shop in clairemont, is that u? ur shirt says carlsbad, just wonderin, maybe ill cruise by and get a detail lol
@Its_CJay2 жыл бұрын
Really nice video there Josh! I was wondering if you have white lettering on the tires and you use a tire dressing will that make the white darker? I live in Quebec, Canada and I can't really test it for myself as it is very cold and covered by a lot of snow
@joeavery65872 жыл бұрын
What tire cleaner do you recommend for polished aluminum wheels, I have 35s and need help cleaning them without hurting wheels
@mmurat608 Жыл бұрын
Hi Josh..is the 3d ultra dressing still today would u say the best or one of the best dressing ..or Adam's graphene dressing.. .. I use Adam's and still feel doesn't last long. Anything u recommend I'm located on the east coast... Thanx in advance... Mike
@mikevincent93812 жыл бұрын
Can you use Super Clean to clean wheels as well as tires ? If so what dilution or full strength ?
@stephenwhite54442 жыл бұрын
Yes, just dont let it dry (no matter what surface your cleaning never let it dry). Anywhere from 4:1 to 10:1 depending on how dirty it is. Test it out at 10:1 and if you want it stronger just add the same amount of Superclean to your mix to get 5:1 and itll just just about anything....I use it on wheel wells and tires.
@perry39282 жыл бұрын
Hi Josh. New to the channel. Love the content. Excellent presentations.
@btbd2785 Жыл бұрын
Can this product be used on plastic and rubber trim? Also if it rains will it streak? Lastbquestiin is this a polymer based product?
@fourc33532 жыл бұрын
What do you think about the graphene based VRT from Adams? They claim it's water based but it's in a squeeze bottle
@coreymerritt77422 жыл бұрын
Thanks for the tips josh I’m running into the same issues on my dually I have the Goodyear duratrack and they are a pain to put tire coating on thanks
@timkinley17792 жыл бұрын
I use a large raceglaze round brush. Typically I apply Perl at full strength. However, I remove the excess and/or flatten them out with an old 4" flat paint brush. Since Perl doesn't have a trigger, I'll sometimes cut it 1:1 in a small spray bottle. My preferred process is pouring Perl into large-mouth container that will accept the brush and dip it into the product as you would paint. I use a handled container with magnet for the brush. Common item at any paint supply store.
@jasperb9942 жыл бұрын
Hey josh love your channel!!! I am using a APC for a wheel and tire cleaner my question is can it be harsh even if it’s diluted at a low power formula? Thx man
@LarryRichelli2 жыл бұрын
Is there a hands free car wash in San Diego that you could recommend. I am driving down there this weekend and I want to get the bugs and dust off of my new Tesla. Thanks
@curtismartin17182 жыл бұрын
New subscriber here. Love all the professional advice. Any product suggestions for more of a matte finish? Not a fan of the wet look.
@imjoshv2 жыл бұрын
Yea same product but you can dilute it a bit with water to knock down the glass.. or just pat it down with a microfiber after application
@brianm73482 жыл бұрын
🇺🇸New subscriber here!!! 🇺🇸 Josh how long does this product last? I’m looking for a great shine on my Jeep Wrangler Willy’s. Looking for a product that lasts the longest. Thank you and excellent channel brother. New Jersey here
@dimmacommunication Жыл бұрын
Personally I think that tire shine is something you do sometimes cause you like it, too much effort for only the tires. Also strong cleaners needed for the tires will decolor and probably damage the tire in the long run. I'm trying CarPro Darkside to have it last at least 1 and a half month, it says 3 months but we will see.
@Ymh699692 жыл бұрын
Can you do a review on the aqua shine tire shine?
@inkgenie97602 жыл бұрын
1st and great video!!
@MSFerrari248F12 жыл бұрын
Hey man, this is probably a very specific question, but what can you recommend for the sidewalls on a set of Michelin pilot sport 4s? Nothing seems to want to stick to mine. I have tried applying tire dressing with a brush and with applicators, as soon as I go to wipe the excess it looks dull.
@wendelladkins43722 жыл бұрын
I've had issues like that with other types of tires. I try to avoid direct sun light if possible cause it tends to dry up or soak up thinner tire dressings way too fast but if you're using thin dressing put it on it thin coats. One coat and go to the next. Work your way around the vehicle like that. The dressing should tac up some and the dab the excess off instead of wiping. My personal tires I use Maguires endurance tire gel. It's the purple stuff. Easy to use as long as you have a primed sponge like dressing applicator. Work the dressing in real good. But with the gel I use I normally don't wipe of excess cause I work it in really good and I'm not driving right after. Hopefully this helps you
@zackbinkley58242 жыл бұрын
Adams tire shine , the banana scented one, apply with a brush(detail factory)Works wonders.
@daleair2012 Жыл бұрын
Nice idea
@davidbaca78532 жыл бұрын
Do you have any videos or suggestions as to when your windshield starts to get a “sandblast “ look when it’s cleaned. Something like refurbishing a windshield.
@Brian-dj3ru2 жыл бұрын
Get some glass polish..and use 0000 steel wool to clean the glass
@geneh31272 жыл бұрын
Great video ! You using a Power washer or what ?
@tonyfields89682 жыл бұрын
How does the 3d product compare to meguiars hyper dressing ? Hyper has been my go to for years but now it is hard to get and ones you may get are so expensive
@dtna2 жыл бұрын
Is tire "sling" caused by... 1. Insufficient time to dry or the 2. Type of product
@christophertodd50102 жыл бұрын
Yes to both?
@cmendoza2442 жыл бұрын
What about excess dressing?
@MikesAutoDetailing2 жыл бұрын
Great job
@DuckSlayer122 жыл бұрын
Dude your from SD? Me to I’m from the mountains towards the Indian casino. I’d like to pick your brain bout detailing I just started my own business for detailing
@maximinojaimes98602 жыл бұрын
Can the max shine wheel and tire cleaner be diluted?
@usmcfiredog2 жыл бұрын
where can I find your services in San Diego?
@stephenlouden480 Жыл бұрын
as a detailer i only dress the side of the tire that doesn't contact the road. i never understood why most detailers and people in general feel the need to dress thee contact patch and then ask why they get sling 😆
@chevynation64762 жыл бұрын
Gotta subscribe:)
@autry042 жыл бұрын
Did you get a new van?
@StayBlessed87 Жыл бұрын
I always spray the tire with dressing lightly wipe it down and drive off to get splatter of gunk all up and down the side of my durango 😂😂😂
Жыл бұрын
I usually use paint brushes of various sizes
@gnawty46628 ай бұрын
I’m here because I got the wrong brush 😖. But In case anyone was wondering - THIS IS WHY you need an electric pressure washer. The gas is so inconvenient.
@AngeloPaggett2 жыл бұрын
Try cover all
@jbhouseofshinedetails88272 жыл бұрын
The best tire shine
@joefro94732 жыл бұрын
1ST TO COMMENT!!!
@autograph4152 жыл бұрын
whats up josh v
@imjoshv2 жыл бұрын
Yo!!!
@gabeesquivelLethalZR12 жыл бұрын
Company sold out of brushes. You put them under lol.
@Dizzybebeamin2 жыл бұрын
why not just use an air compressor
@imjoshv2 жыл бұрын
Do you mean applying like an airbrush? That will still get over spray on the wheel. Not a big deal on silver wheels but can really effect the appearance of black wheels
@autograph415 Жыл бұрын
coverall g
@time2shineautospa5862 жыл бұрын
2nd
@RLesser112 жыл бұрын
If you want an even easier method than that……..all you have to do is rub in the tire dressing as you normally would and forget about all of the foamy extra stuff that gets into the crevices. When you’re done dressing The tire, pull out your blower and blow The edges around the tire and you’ll be good to go!!!
@jamesritz7254 Жыл бұрын
They all claim best tire junk. I haven't found a good one yet
@ryans4132 жыл бұрын
I just use cleaners I don’t use dressings there stupid in my opinion