#CarbonFiber #EpoxyResin #Table Carbon Fiber Table with Epoxy Resin [DIY] Making a Carbon Fiber Table Carbon Fiber Skinning / Wrapping DIY Wrap Real Carbon Fiber
Пікірлер: 499
@OGMann3 жыл бұрын
I appreciate showing the fail and what contributing factors there may have been. Too many people don't appreciate that failure is part of success. Particularly during the learning process. Good job.
@isun31304 жыл бұрын
指先が… いろいろと物語るところが、 すばらしい!
@taoisttiger47022 жыл бұрын
Honestly what I'm impressed with the most is your ability to not have a gigantic mess, the few times I've delved into composites yielded good results but awful messes hahaha
@ryanokeefe123 жыл бұрын
As a fan of simple tools that make life easier, I think you would benefit from a few different sizes of 'notched' adhesive spreaders, for your gel coat. The notches are small and when the correct size is selected, it'll let you spread the gelcoat around a large area while leaving the right amount behind. This'll let you get the coating over the whole area quicker and prevent extra work needed to fix thin/thick pots.
@tomrockholm-timeless_morph66914 жыл бұрын
Just a bit of advise, a tack clothe works better when it’s fully opened and then lightly balled up, helps activate the adhesive in it. Also when sanding with high grit paper you should use wet, avoids the paper clogging up and causing pig tail scratches in your finish which can show up after polishing since it’s basically gouging into your topcoat.
@danielmiller28864 жыл бұрын
Boy, IKEA is really making their table’s assembly complicated now.
@johnekare83763 жыл бұрын
At least you'll have the trusty IKEA man to pictographically guide you through the process.
@KevinATJumpWorks3 жыл бұрын
I think you could make this a lot easier if you wetted the carbon fiber all the way through at first and then used a perforated film with a breather layer under vacuum to get all the excess resin out. Then just quick sanding and you got a nice even surface without these darker spots
@albertogonzalez58304 жыл бұрын
Love your videos bro. You have a funny sense of humor as well lol. We want to see more projects lol😂
@tekkietekkie4 жыл бұрын
That looks great, thanks for sharing
@JamesLee-zt8kv4 жыл бұрын
미국에서 잘보고 있어요. 배우고 싶네요... 코로나때문에 집에만 있으니 죽겠습니다
@gedanggodog46544 жыл бұрын
Feel very satisfied watching the end of video 😆😆😆
@orens74553 жыл бұрын
Wow, beautiful work!
@Anfurnyy4 жыл бұрын
Good God that first sanding bit gave me the goosebumps lol
@letsflipp3 жыл бұрын
this feels like it's trying to give off the vibes of that one knife making channel, and i have to admit it does it quite well
@richardhong73384 жыл бұрын
amazing table !!!
@Amir__the__realtor4 жыл бұрын
it was amazing. i worked with epoxy resin for about 2 years and i always wanted to use carbon fiber in my projects. with watching this video, i am going to do it. thanks for sharing the video. just need to know about the epoxy you used on the pallet, can i use ordinary resin instead or it is special?
@JDM_eastcoast4 жыл бұрын
This shit is relaxing..with me being quarantined inside the house i might start carbon fiber everything now
@Tedzy4 жыл бұрын
Great job!!! 🙌🏽
@GrantOakes4 жыл бұрын
I really like your simple videos, no narration or music. Next time you want a mirror finish on a flat surface just use glass and then bond your laminate to the MDF board.
@kramer264 жыл бұрын
Or do as you say and lay up on the glass, then add the baseboard and wrap the carbon around it... It's how I would do it, and would use a clear gelcoat or initial layer of epoxy with lightweight glassfibre before laying in the carbon.
@Creedisa2 жыл бұрын
Change the color of your car with carbon without dyeing kzbin.info/www/bejne/l32YmXmehpt3p80
@hojunming26224 жыл бұрын
You need to apply ppf on it to protect against scratches ;D
@dantheman3214 жыл бұрын
What's ppf? Thanks inadvance👍
@AlexAlex-sv9ib4 жыл бұрын
Shows in detail how to fail, speeds up 1000x how not to fail
@danielmiller28864 жыл бұрын
You learn more from mistakes. My problem was the slow motion baby wipe dispensing.
@jacobkollerup4 жыл бұрын
Perfection!
@shirokuma0124 жыл бұрын
これは満足感高いですね。カーボン好きにはたまらないアイテムですね。
@Creedisa2 жыл бұрын
Change the color of your car with carbon without dyeing. kzbin.info/www/bejne/l32YmXmehpt3p80
@user-uh3cw8vr9j4 жыл бұрын
새로운 취미를 찾던 도중에 카본diy를 보고 있었는데 넘나 잘봤습니다~~~~~
@manman41674 жыл бұрын
진짜 금손이 여기있으셨네요!
@ECOLAPStudio4 жыл бұрын
감사합니다! 아직 혼자 이것저것 시도해보고 공부하고 있습니다. 아직 많이 부족하지만 지켜봐주세요! 시청해주셔서 감사합니다.
@Hwan664 жыл бұрын
아니 형 못하는게 뭐야?!!!!
@JSeds4 жыл бұрын
I just built my own carbon fiber table. Do you have issues with it scratching and if so, how do you prevent them or remove them?
@studioleeyoon4 жыл бұрын
손연기가 대상감입니다 ㅎㅎ 손놀림에서 빵빵 터지고 갑니다
@ECOLAPStudio4 жыл бұрын
+Hosik Yoon 재미있게 봐주셔서 감사합니다!! 더 재미있는 영상 만들 수 있도록 노력하겠습니다~^^
@aquacony47684 жыл бұрын
ウチのボロテーブルにもカーボン貼ってみようかな〜 うまくできるかは分かりませんけど
@velosapien2 жыл бұрын
You should never have used gelcoat, instead a thin layer of epoxy to establish the wood surface. Once cured you then place the carbon cloth wet and align the weave.
@spudpud-T672 жыл бұрын
Paint the board black then let set. Then use clear epoxy to adhere and cover the CF cloth. Then you have no black bleed through visible
@Creedisa2 жыл бұрын
Change the color of your car with carbon without dyeing kzbin.info/www/bejne/l32YmXmehpt3p80
@GoFastJames3 жыл бұрын
Nice work I love the videos keep up the good work. If I was to make the same thing I would do one the methods some the companies use to make flat sheats and use a sheet of glass or 2 to keep it truly flat and no MDF so it's just carbon. And use carbon tubes for the legs and or aluminum.
@user-ft7ew3mm9h4 жыл бұрын
amazing carbon fiber 😍
@ECOLAPStudio4 жыл бұрын
Thank you so much~
@AaronOffRoad4 жыл бұрын
Please, we need a video tutorial on how to make a carbon fiber car steering wheel. There is none on the internet
@ECOLAPStudio4 жыл бұрын
If I get a chance, I'll make it. Thank you for the good idea. and Thank you for watching. ^^
@MrFlyingPanda4 жыл бұрын
this guy has no clue how to make carbon fiber parts and you want a steering wheel.. Good luck..
@albertozampierin30364 жыл бұрын
@@ECOLAPStudio dove posso trovare quei sacchetti per mettere sotto vuoto? Grazie
@baileydelivera2834 жыл бұрын
Nabi, what do you mean?
@kramer264 жыл бұрын
There is one on KZbin if you look
@JuanTorres-ly1rq2 жыл бұрын
I have a couple questions you gave me the idea to a flat door panel and I am thinking of using you method since is practically all I need to do is use this same format. What kind of gel coat is that.
@guyetame88024 жыл бұрын
From France..Respect !!!
@widwrap4 жыл бұрын
언니 정성이 엄청나네요 ㄷㄷ
@ECOLAPStudio4 жыл бұрын
감사합니다~ 노가다의 연속입니다ㅋㅋ
@nikioh774 жыл бұрын
진짜 카본 테이블 만들어보고 싶었는데.. 여기에 있다니 시간되시면 재료등은 어디서 구입했는지 알려주세요.. 그리고 재료측량하실때 .. 저도 참고 하고싶은데 무게측정하는 부분에서 그냥 넘어가서 ... 배합비율등이 궁금합니다. 영상 잘 봤습니다
@General1Cal4 жыл бұрын
Love it, it must be super light also.
@SavedbyHim4 жыл бұрын
Not really because it's just made of wood. The carbon is just for looks
@user-zn9zk2ui8d4 жыл бұрын
1회 시청만에 바로 구독~!!
@kawa_zh23 жыл бұрын
This dude is carbon God😆🔥
@florinflorinstanila98604 жыл бұрын
Superrr !!!
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! Thank you!!!! so!! much!!
@codyzellner3 жыл бұрын
Too many people try the AvE editing method these days and just don't accomplish the humor he has with out being funny. That said, thanks for taking the time to film edit and upload this.
@MrSavageJedi4 жыл бұрын
I miss Korea, thanks for the vids!! Have you ever reshaped a steering wheel, making it flat bottom?
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! I'm sorry I don't speak English well so I don't know if I understood it well. The floor surface is not flat. It has a finger grip.
@medogabr99524 жыл бұрын
ECO-LAP Studio he means making steering wheel shaped just like D
@seankemp53154 жыл бұрын
I'm going to try some this week. So this is called skinning? How much is the cut of carbon fiber? I'm in the USA
@douglasrho56193 жыл бұрын
what was the second polishing attachment he put after the first one? The red color one.
@supercharger2504 жыл бұрын
Love all the videos man 🤙
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! Thank you for your comment. I will make more interesting and informative videos, so stay tuned to my channel. Thank you for watching.
@user-bj6dp5ji8i4 жыл бұрын
장인정신.... 멋지세요
@ECOLAPStudio4 жыл бұрын
최정혁 카본장인이 되어보겠습니다!
@seankemp53154 жыл бұрын
Why did you add heat to the top coat on this one but not the steering wheel or shifter?
@abdielrivas66333 жыл бұрын
What you put in the table in first place, the black thing
@Carboniotecable4 жыл бұрын
Hi, what brand of bag kit use for the vacuum ?
@radioguraphics4 жыл бұрын
실패시의 손연기가 약했던거 말곤 정말 시간가는줄 모르고 봤네요 ㅋㅋ
@ECOLAPStudio4 жыл бұрын
안녕하세요~ 즐겁게 봐주셔서 감사합니다^^ 아직 여러면에 많이 부족합니다. 더 열심히 노력해서 더 재미있고 유익한 영상을 만들테니 기대주세요~
@user-ct4ym2vb5r3 жыл бұрын
안녕하세요 !! 손기술이 너무 좋으시네요 가까운 곳이면 직접 뵙고 한번 배워보고싶습니다 ㅠㅠ
@taehunkim3294 жыл бұрын
Was it different type of epoxy when apply for top coat? Or same thing as normal one?
The sound gesek gesek is very ngeress. Hatiku merinding gaes..
@mohamedel8054 жыл бұрын
What a cool channel, keep it up👍🏼
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! Thank you for watching. I will make fun and informative videos. Please lookfoward to next video. Thank you.
@Crossy79714 жыл бұрын
공기빼는거할때 청소기로해보세요 엄청잘됨
@ECOLAPStudio4 жыл бұрын
원래 청소기를 사용하는 제품인데.. 청소기를 사용하면 너무 한번이 공기가 빠져서 잘 사용 안하게 되러라고요. 공기를 빼면서 진공백의 모양을 잡아줘야하기 때문에 불편함이 있습니다ㅠ
@crmnl_la4 жыл бұрын
Can we do this without the vacuum seal bag?
@ytkim27474 жыл бұрын
영상만 보고 해외분인지 알았네요.^^; 금손이십니다. 질문이 있는데 에폭시 경화 후에 집안에서 쓰기에 독성이 있지 않나요? 경화 돼도 냄새는 많이 나더라구요. 그리고 기포 제거 하실 때 반 경화 상태에서 하신건가요?
@KDD84 жыл бұрын
7:31 where do you buy the pump
@worldbeautifulreligionisla6467 Жыл бұрын
I love carbon fiber parts 😍😍
@user-gv3fz2pq9x4 жыл бұрын
구독과 추천을 안할수 없습니다..굿!
@ahmetfidan33554 жыл бұрын
Good job man. Thanks
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! Thanks for the compliment ~ I will make more interesting and informative videos, so stay tuned to my channel. Thank you for watching.
@garydeandeery2 жыл бұрын
Do you know if I can do this over laminate table top ??
@AbeltheGuru Жыл бұрын
Great video
@zacharyoneil98564 жыл бұрын
I would like this man do my car all carbon fibre 👍👍
@neversettle110311 ай бұрын
Good job !
@AmeenHandyMan4 жыл бұрын
Fantastic Channel!
@FATmods4 жыл бұрын
Do you have a link to the epoxy gelcoat
@zombies6199 Жыл бұрын
What type of compound polish did you use?
@red8206144 жыл бұрын
잘만드시내요😄👍👍👍
@MrHj1210r3 жыл бұрын
이정도면 변기 카바도 카본으로 만드실분이라는걸 잘 알갰습니다 ㅎㅎㅎ
@taehunkim3294 жыл бұрын
Do you discard the brush or any other materials that you used after the project?
@ECOLAPStudio4 жыл бұрын
브러쉬는 보통 한번 사용하고 버립니다. 그렇지 때문에 비싼 브러쉬를 사용하지 않고 저렴한 브러쉬를 50~100개씩 구입해서 사용하고 있습니다. 에폭시 레진을 바를 때 사용하는 브러쉬는 솔이 너무 강하지 않은 것을 사용하는 것이 작업성이 좋습니다.
@eddyfirdaus93504 жыл бұрын
I would like to know.. how we want to take care the brush after use the epoxy... Because if just wash.. it will be harden
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! I do not reuse brushes. I buy and use several cheap brushes (approximately 5 cents). If you want to reuse the brush, you can wash it with acetone. However, it cannot be reused much.
@espiritumikeaquino7594 жыл бұрын
nice table
@DoctorPepper43 жыл бұрын
Any way you can send me what I need to buy to do this even the bags?
@mychelcanalija10893 жыл бұрын
wow nice.
@spudpud-T672 жыл бұрын
Maybe paint the board black then let set. Then use clear epoxy to adhere and cover the CF cloth. Then you have no black bleed through visible.
@jsk49284 жыл бұрын
드디어한국에도 이렇게 영상올리시는분이 나오네요 저는 대농인프라 김준석 상임연구원이고 탄소섬유대량생산 신기술 및 특수용액으로 코팅제 개발하여 우레탄 및 어떤 도색을해도 핀홀이 하나도없게 제작이 가능합니다 ㅎㅎ 저도 처음에 클리어코트 열나게 3번씩 갈아내고 핀홀잡았던 기억이나네요 ㅎㅎ
@ECOLAPStudio4 жыл бұрын
안녕하세요! 마무리를 할 때 최대한 깨끗한 면을 만들기 위해서 노력하지만 완벽한 마무리를 위해서는 어쩔 수 없이 샌딩과 폴리싱을 할 수밖에는 없었는데 핀홀이 없이 가능하다니 매우 흥미롭고 놀랍네요. 피니시용 코팅제를 별도로 판매도 하시는 건가요?
@jsk49284 жыл бұрын
@@ECOLAPStudio 저희는 대기업 및 한국탄소융합기술원 같이 대량생산이 필요한 곳에 맞춰 연구하다보니 개발이 완료되었습니다 ㅎㅎ 또한 아시다시피 클리어 코팅 수지로 코팅하시면 광택도 광택이지만 작업이 한번에 끝나는 것이 아닌 황변이 너무 심하며 충격에 왔을때 크랙이 온다는 점이 문제점입니다. 우레탄 클리어는 uv차단효과와 황변억제가 되어있으며 깨지지않는다는 장점이 있죠 ㅎㅎ 아시다시피 우레탄 도색을 올리고 싶어도 올리기 어려운게 현상황입니다. 그러다보니 3년동안 연구해서 도막을 형성해주는 특수 물질을 개발하였고 아마 우레탄 도색과 같은 클리어 페인트로 마감 되신다면 굉장히 편한 작업성을 느끼실 겁니다 ㅎㅎ 아직판매는 안하고있구요 저도 유튜버님처럼 열정을 가지고 탄소섬유 제작하시는 분들을 응원해드리고 싶습니다 ㅎㅎ xlfkshek1004@naver.com으로 연락주시면 재밌는 이야기 많이 나눠볼 수 있을 것 같습니다
@zl_3904 жыл бұрын
May I know what's that scraper you used to spread the epoxy resin?
@Rebkavets4 жыл бұрын
It's like a scraper for wrapping vinyl
@ECMTUNER4 жыл бұрын
how do you deal with the smell ? looks like you do this at home.
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! When working on carbon fiber, the smell of epoxy resin is always a concern. I'm making carbon fiber at home. I care about ventilation. After using the epoxy resin, be sure to open the windows and ventilate. It is best to open the windows because there is no ventilation system. and If you let me know your email, I will send the canard file to you. Thank you for watching.
@bryanalonso61842 жыл бұрын
can 2k clearcoat in a can spray be used instead of a polish compound and buffing after the surface has been sanded down? Or will it still show the sanded parts? Thanks
@garydeandeery2 жыл бұрын
Yer use UV clear coat spray Do wet sand first and acetone to clean spray coat 50mm over spray wait few minutes to go over again don’t let it dry or the edges after 3/4 coats let dry 12 hours then do your polish
@Creedisa2 жыл бұрын
Change the color of your car with carbon without dyeing kzbin.info/www/bejne/l32YmXmehpt3p80
@elvolad Жыл бұрын
Nice job
@StrongemStrongem4 жыл бұрын
Sei un genio !!!! Volevo un consiglio devo fare delle parti di carbonio alla mia Maserati ma vorrei mettere sotto la pellicola carbonio e sopra la resina che ne dici ? Potrebbe resistere?
@ECOLAPStudio4 жыл бұрын
Hi, buddy! kzbin.info/www/bejne/haPGf2iYa5egfJY Please watch this video. This url is working on carbon fiber interior. In carbon skinning, it is very important to apply epoxy resin and leveling the surface. You have to apply epoxy resin many times. When leveling the surface, be careful not to damage the carbon fiber cloth. I hope you can make a good carbon fiber parts. If you have question, please reply. Thank you for watching. ^^
@ArtisticSep4 жыл бұрын
Impressive, the polishing could have been better but i digress.
@Creedisa2 жыл бұрын
Change the color of your car with carbon without dyeing kzbin.info/www/bejne/l32YmXmehpt3p80
@dallibabs3 жыл бұрын
What Carbon fibre wrap did you use? Got a link
@CarPEDiemas3 жыл бұрын
awsome
@orangexxxx31403 жыл бұрын
Where did you get those vaccum bags with the pump?
@OxxidCZ4 жыл бұрын
Well I was expecting a carbon fiber table, not fibreboard wrapped with carbon fibre sheet....
@drumbum79994 жыл бұрын
that's because you don't understand how composite objects are made or at least you didn't
@munkydotorg4 жыл бұрын
@@drumbum7999 I'm with embino, and I do have an idea of how composite objects are made. At first I thought he was running a very thin piece as a core, but this is more of a laminate that is true carbon fiber. Or that he was using that piece to create a mold. I'm not disappointed, it is a nice looking table, but you get all of the cool looks of carbon fiber but without the lightweight benefits of carbon fiber. Granted he didn't have to lay multiple layers, add in core material, create support structures and bracing, so from a time and cost perspective, it was the best route.
@swallowblacksb3963 жыл бұрын
12:02 물티슈 꺼내는거 진짜 ㅈㄴ웃기넼ㅋㅋㅋㅋㅋㅋㅋㅋㅋ
@allanknudsen26164 жыл бұрын
Great channel, just subscribed. I understand that you had too much gelcoat the first time. But why did you even bother putting on gelcoat? Couldn't you just have put epoxy resin on top?
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! It could also work with epoxy resin. However, it is recommended to use a gelcoat. There are several reasons to use a gelcoat. First, the gel coat is very viscous and does not flow down. And, the base color of the parts can be covered with black epoxy gelcoat. I hope you helpful. Thank you for watching.
@mlinecomposites14 жыл бұрын
Knudsen Allan yes your right, it’s cheaper just to make your own “Gel Coat” or thicker resin. He could’ve added black pigment to the resin. And to thicken it a bit also he could’ve added glass microspheres to it. It’s pretty much the same instead of spending extra money surface coat
@eTeeGaming4 жыл бұрын
How do you keep it dust free when top layer resin is drying?
@ECOLAPStudio4 жыл бұрын
Hello, Buddy! Small parts are top-coated and covered with a box. However, for larger parts, apply several top coats and polish after leveling. Large parts are difficult to avoid dust.
@JesusHernandez-lv4rx4 жыл бұрын
You don’t. For large items if you’re doing this at home you take 1000 grit to remove dust nibs just as you would if you’re painting a car in your garage dust and bugs will typically land on the clear coat while it dries
@youngcho40124 жыл бұрын
잘보고 가요~
@ECOLAPStudio4 жыл бұрын
감사합니다 다음 영상도 기대해주세요~
@noneyobusiness44292 жыл бұрын
is it not possible to make a table solid carbon no wood at all??
@funcarsforyou4 жыл бұрын
Very nice
@SuperArchi2010 Жыл бұрын
Hi There Thank you for the video techniques with carbon fibre I have a questuon Hiw would you approach a conical shape 40cm diameter 30cm height Maybe one sheet to cover it all ar once or in pieces or any other way Much apprieciate your help Best
@kazamakwanofficial4 жыл бұрын
이거 보고 나도 따라해야지 ㅋㅋㅋ
@ECOLAPStudio4 жыл бұрын
+kazama kwan 권용기 같이 많들어요!!^^
@sajidmohammad3190Ай бұрын
And a Legend was born.
@kayaman05233 жыл бұрын
마지막에 광작업한 약품이어떤건가여 ?
@umkcboxer4 жыл бұрын
잘보고갑니다!ㅋ 집에서 작업하시는거에요!?
@ECOLAPStudio4 жыл бұрын
안녕하세요! 네 집에서 퇴근 후에 조금씩 작업하고 있습니다. 집에해서 하다보니 어려움이 좀 있지만 이것저것 많이 시도해보려고 합니다. 시청해주셔서 감사합니다.